Issues after copying a query from one IP to another

Hi Friends,
I have a query which was built on a infoset, i have built a multi provider with aditional objects apart from what i have in the infoset, i.e. this Multi provider has all the objects which are used in the query. I have copied the query from infoset onto the multi provider. All is well until this point.
but when i see the default values or free characteristics of this copied query, it still shows the objects with prefix of old infoset. Shouldn't it be having prefix of multi provider instead as this query is based on the Multi provider?.
Also when i save the query, i get a error message saying that XXX characteristic is not found in the info provider(MP), where as this cahr is available in the Multi provider.
Can someone pls guide me how to resolve this?.
Regards
BN

Hi,
I get an error message when i try to copy the existing query to the new Mulit Provider. This i get in Transaction RSZC after i give source Ino cube XXX and Target Info cube ZZZ and select Queries radio button and execute.
The error message what i am getting is as follows
InfoObject Source__F1 is missing in target info cube (Muti provider name).
like this i am getting for almost all the objects, but all these objects are available in the target.
Since, the query was a stright forward one i have created a new query exactly like the other one.But now i get another problem, i cant see the data in the report, even though there is data in DB. I checked the data on the Infoset and Multi Provider using Listcube.
Can you suggest what can i do here?
Regards
BN

Similar Messages

Copying a query from one cube to another cube

HI BW Gurus,
I am having a report due date for net payment analysis in Accounts receivables and i want to copy the same query into a different infocube accounts payable.
Is it posssible to copy a query from one infocube to another infocube.
Regards,
Syed

Hi,
Yes,it is possible to copy query from one infoprovider to another infoprovider with some conditions.Please have a look at the note 981104 which explains you how to Copy between InfoProviders and Copy within one InfoProvider.
Rgds
Manoj Kumar

How to copy a query from one infoprovider to another infoprovider

Hi Experts,
Could anyone suggest me on how to copy a particular query from one infoprovider to another infoprovider which are identical and have the same objects in them.
Thanx in advance
Lalit

Hi Lalith,
Use the Transaction RSZC and specify the - > Source InfoCube -> Target InfoCube and select the queries you want to copy.
Hope it helps
Regards
Srikanth

Cant open boot archive after copying Solaris 10 from one machine to another

We are running "Solaris 10 3/05 s10_74L2a" on a Sun Fire 480R.
I tried to, using ufsdump to copy the filesysem to a T5220 which has 4 disks, the first 2 disks are a mirrored os of a Solaris 10 version already there.
So I restored the ufs inages to the 3rd disk, ran installboot with the bootblock from the restored image for s sun Fire 480R as there did not appear to be a bootblock for a T5220 , as its a more recent server.
ie:
installboot /mnt/usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0
/mnt/usr/platform/SUNW,SPARC-Enterprise-T5220/lib/fs/ufs/bootblk: File not found
so I do this instead :
installboot /mnt/usr/platform/SUNW,Sun-Fire-480R/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0
Now then I try to boot I get :
Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@2 File and args:
ufs-file-system
Loading: /platform/sun4v/boot_archive
Loading: /platform/sun4v/boot_archive
Can't open boot_archive
Evaluating:
The file just loaded does not appear to be executable.
but, as far as I know this old version of Solaris did not use a boot archive and there is no directory /platform/sun4v/boot_archive in the restored files, nor on the original server.
So, my question is, if the old version of os did not support a boot-archive, why is this restored image, when I boot , giving this error.
Surely all the data on the 3rd disk should be the same as on the old server.!!
What am I missing here ??
George

Well, you can't just copy an OS from one type of system to another and expect it to work. For one thing the OS communicates with its hardware through the /dev/ and /devices layer, and that layer will be completely different when you transfer it to another system.
Second of all the lack of boot block for the T5220 in your installation indicates that your version of Solaris 10 does not support the T5220 platform, which probably means that it will be impossible to boot completely on it anyway..
I'm not sure when the SPARC systems started to use the boot-archive..
Anyway, the two things you have missed is to create the boot-archive (with bootadm update-archive -R /mnt), and to run devfsadm on the new platform (devfsadm -r /mnt ).
Even so, there is no guarantee that your version of Solaris actually supports your hardware.. But i guess that's documented in the Sun System Hardware Handbook..
.7/M.

Copy ABAP query from one servert to another

Hi,
How to copy ABAP query(SQ01) to other servers.Here we have sandbox-dev-quality-and prod.Now a query is created in sandbox, so i need it to move to Dev and then to quality.So do we have any upload and download option for this or we need to copy the code from system-status.

Similar issue solved here.
Download Query SQ01/SQ02

Publish Error after copying domain file from one mac to another

Hello there,
so here is the problem: I have had iweb installed on a MBP, and a website up and running. Now that I just bought an iMac I wanted to transfer all the iWeb over to the iMac and make it the main machine. I was doing all the transfer work manually rather than using the migration assistant or time machine.
I have copied the domain file in the iWeb directory over to the iMac. iWeb starts and displays all the pages and sites normally, but when I try to publish I get the " Publish Error. An unknown error occurred" message.
On the MBP everything was/is working normally.
I have tried to copy the same file again, no change. I have deleted the preference file, no change.
I have tried publishing to a local folder, and get the same error message.
Does anybody have an idea how to get this fixed? I browsed through the discussions here but couldn't find anything regarding this specific issue.
cheers
grani

Welcome to the Apple Discussions. Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
3 - reboot.
4 - launch iWeb and try to publish.
If that doesn't help continue:
5 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
6 - launch iWeb, create a new test site and save.
7 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
8 - move your original domain file from the Desktop to the iWeb folder.
9 - launch iWeb and try again.
OT

After copying the audio from one project to another, there is only silence?

I am working in Adobe Premiere CS4. Because of an error with one of my projects, I wound up just copying all the video as well as the audio (which has a bunch of fadeouts/intricate splices) to another project. When I try to play the audio in the timeline, however, there is just silence. The video is just fine, though, besides things like scaling being off, which I've accepted that I will have to re-do manually. But does anyone have any ideas as to why the audio is just not playing at all? Thanks.

Select one of the silent clips and then park the playhead over it. Perform a Match Frame operation by pressing the M key. That should bring your audio back.
-Jeff

Copy Query from One MultiProvider to Another

How easy is it to copy a Query from one MultiProvider to another?
thanks

If the elements of the query is not same try using following function module RSZ_I_COPY_QRY_TO_CUBE to copy queries
Re: Copying query structure to new infoprovider
Ravi

Copying a Single BEx Query from One Infoprovider to Another

Is it possible to copy just a single query from one Infoprovider to another?
I know how to copy all of them at once, but I want to know if there is a way to do it just for a single query.

Ah. That worked perfectly.
Awarding points.
Thank you.

Copy one query from one infocube to another infocube

Hi BW Experts,
Hope all of them are doing good.How can we copy one query from one infocube to another infocube.
I have infocube1 having one query ,I NEED to copy that query to infocube2? How?
Could you please help me out?
Thanks

Use transaction RSZC in BW (BTW you're addressing BW experts in a BO forum better post in the Bex section of the BW forum)

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

Error while copying a page from one application to another application

Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.M

I'm having the same issue. How did you solve this?

How To Copy Selected Music From One Library to Another?

What is the best way to copy selected music from one library to another?
I have a big and growing iTunes library -- 33,000 songs.
A year ago I copied my library to my daughter's new iMac. Now, a year later, I'm off to visit her and wonder how best to update her library. In the past year I have added a number of items to my library and I'm sure she has done the same -- some might be the same but many will be different.
How do I update her library with the new things I've added in the past year but not wipe out things she had added or duplicate when we each have a song?
I can load any / all of my stuff on an external HD and take that to plug in to her computer. Then what? I want to avoid duplicates and make sure I get stuff like album artwork.
I'm running iTune 10.4 on an iMac with OS X 10.6.8 -- my daughter will have the same iTunes and OS X once we update her software.
Any advice would be great.
Thanks

If you're sharing the same Apple ID and all your songs are from the iTunes Store, it's easy:
In iTunes on your computer, go to File->Preferences->Store and check the box next to MUSIC under AUTOMATIC DOWNLOADS.
You should also read this article, the section titled TO DOWNLOAD PREVIOUSLY PURCHASED APPS, BOOKS, MUSIC, OR TV SHOWS TO YOUR COMPUTER:
http://support.apple.com/kb/ht2519
You could also use an rsync utility such as backuplist+ to perform a 2-way sync of the files in your two libraries while your computers are connected via FireWire with one of them in FireWire Target Disk Mode, or from your external hard drive with your daughter's computer and then to yours again. After that, you'll need to use iTunes on each computer to update its library with the new files:
http://rdutoit.home.comcast.net/~rdutoit/pub/robsoft/pages/backup.html
This last would also be the preferred method if you have authorized each other's computers for media purchased with each other's Apple IDs (i.e. you are not sharing the same Apple ID), or if you have music from sources other than the iTunes Store. Most likely, though, music from sources other than the iTunes Store would not be legal to copy in this way for this purpose, although there is probably no technical impediment.

Copying a table from one databse to another

Hi,
I used the following code to copy a table from one database to another.
set copycommit 1
set arraysize 1000
copy from username/passwd@tnsname -
create <tablename> -
using -
select * from <tablename>
But I get the following error:
set copycommit 1
ERROR at line 1:
ORA-00922: missing or invalid option
Could you please let me know how this can be done.
Thanks,
Narasimhan

Thanks for your suggestions.I created a database link.I had no problems.
Then when i issue the command
copy from uname/password@db
create <tablename>
using
select * from <tablename>
<Here db is database link to source database identified by uname and password>.
I still get the error
copy from uname/password@db
ERROR at line 1:
ORA-00900: invalid SQL statement
Does it mean that the command is wrong?Or I'm doing something different.
Thanks!

How do I copy a photo from one folder to another one in Aperture

I'm old and feeble I cannot figure out how to copy a photo from one folder to another folder and my 13 year old grandson can't figure it out either, so I feel better about it
thanks
canonmick

Um ... that doesn't seem ... like a useful workflow. When you say "folder" do you mean a Folder in Aperture (shown on the Library tab of the Inspector) or a folder in Finder? They are not at all the same thing.
Aperture is an image manager, with the requisite file management built-in. Finder is a file manager.
If you provide a full description of what are doing, and what you are trying to do, someone here can set your straight.
Fwiw, IME, the learning curve if very long and uphill, but gentle. What's unusual (esp. for Apple products) is that the landmass of Aperture is separated from the rest of your computer knowledge by a moat. What I mean is, the first leap is the hardest. After that, you'll be on firm ground, ready to explore.

Issues after copying a query from one IP to another

Similar Messages

Maybe you are looking for