Issues after installing Classic on OS 10.4

Background and System
I have a Power Mac G3 350Mhz Rev 2 Blue and White, 512MB, 40GB, DVD ROM
running 10.4.9 installed from Retail DVD. Firmware up to date. 2x 20 GB partitions formatted as Extended
Prior to this issue OS X has been running well.
Issue:
After installing OS 9.2.1 to second partition OS X will now not boot up from DVD nor it's partition
Solutions tried:
I wanted to install a Classic environment so used a Retail OS 9.2.1 Bootable CD and did a full install to the second partition.
After the install finished and the system restarted, set on the OS X (Partition1) for start up the system hangs right after the Apple "Chime". with no signal to video card
Attempted to then boot from OS 10.4 DVD but this does not get detected when holding "c" down for boot up from CD option. This worked perfectly before.
Have run OS 9.2.1 Disk Aid Verify and both partitions are ok. The system will boot from the 9.2.1 CD and partition but anything to do OS X now will not work. I also tried an Ubuntu 6.06 Live CD but this will not now boot either.
Checked firmware and tried to re run firmware update and this advised my firmware was up to date.
Any other suggestions?
Thanks

The only thing I can think of is that when you installed the 10.4.9 OS you didn't option to install OS 9 drivers.

Similar Messages

Having issues after installing Essbase V9.3.1,configuring the SQL interface

I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
.odbc.ini
[ODBC Data Sources]
DOLU003=IBM DB2 ODBC DRIVER
[DOLU003]
Driver=/home/db2inst1/sqllib/lib/libdb2.a
Database=DOLU003
[ODBC]
Trace=0
TraceFile=odbctrace.out
InstallDir=/home/db2inst1/sqllib/odbclib
[Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
Received Command [SQLRetrieve] from user [Olapadm]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
Connection String is generated
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
Connection String is [DSN=DOLU003;UID=...;PWD=...]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
= 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
--------------------------------------------------------------------------------------------------------------------------------------------

I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
Once I opened the 32 bit driver interface directly and set it up the errors went away.

Dreamweaver CS4 having issues after installing PS CS6 Beta

Hi All,
I'm having issues with Dreamweaver CS4 after installing Photoshop CS6 Beta. I'm getting the follwing erros when trying to open any html file (see attached image).
Once I click OK, the file will open, also now; any copy and paste commands will not work. Anyone else experiencing any problems with other apps after installing this beta version?
Any help and feedback is much appreciated, thanks!

Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
Just a thought ...
This may help!
Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
It is worth a try!
All the best.

Issues after installing Mavericks

I am having a ton of issues after installing macericks on wed evening, on my MBP 15" 2.5 GHz i7 with 8GB of memory,
I have a task com.apple.internetaccouts, and com.apple.MailServiceAgent, taking upwards of 100% CPU at time and the fan will go full speed, and earlier today i had a msg come up that i had run out of usable memory and the sytem had paused programs, I have restarted a few times and still the same things are coming up and the system has become really slow.
would think that with this system not being that old, that i should not be having these types of issues, if there is something that someone could lead me to ths casue i thnk you
Thanks
Doug

Had this issue again today on my wife's iMac. This was after the Mail.app update that was recently released. I now have messed with this issue enough that I believe I have figured it out.
I used to have a plugin for Mail called HTTPMail that was used to access Hotmail prior to them having POP/IMAP. It seems that removing the account from Mail left some residual account details in the ~/Library/Mail/V2/MailData/Accounts.plist file. Mavericks Mail.app chokes on this account detail and starts duplicating it numerous times. That's why the Accounts.plist file grows so large.
If you open the Accounts.plist file in a text editor (TextWrangler would be my suggestion), find any <dict> entry that points to services.msn.com in any way and remove all those <dict>...</dict> entries, it should resolve the issue. Warning though - I had to delete hundreds of entries so it took a while to do. Once I finished it though, my wife's e-mail has been working fine.

Anyone else having battery life issues after installing Lion?

Anyone else having battery life issues after installing Lion?

Blue Sun Wing wrote:
I have 7.1
I think I would like to uninstall Lion as well. I'd rather have my battery life back.
See if this is helpful: http://www.iphone-my.com/mac/downgrading-lion-snow-leopard/

Issues after installing Hotfix Rollup 5 for SP3

Hi,
Last weekend we installed Hotfix Rollup Pack 5 for SP3 on our (single) Exchange 2010 Enterprise server.
This was needed to fix the WebApp Light issue with IE11 and to fix the problem where users were unsable to delete mails sent from multifunctionals.
These 2 issues were fixed by installing the hotfix rollup pack, but now our users have different problems...
Some users (not all of them, haven't found a common denominator yet) report that they don't see new mails in their Outlook 2010 box, even though they got the envelope notifier.
When they change folder and back to the Inbox the new mail is suddenly visible.
Same sort of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.
Some users also report that they see delegated mailboxes (mailboxes from other users that they have full mailbox access to) twice in their Outlook 2010.
Outlook 2010 is running in online mode (because it's running on terminal/citrix servers), so it's no issue with caching as far as I understand.
I've already checked if there are any updates for Outlook available, but we've installed them all already.
I though I'd found something:
Noticed a lot of errors in the application log on the Exchange Server which pointed me to this:
http://theintegrity.co.uk/2010/08/mapi-session-exceeded-the-maximum-of-500-objects-of-type-objtfolder/
I've added the registry values now with a value of 1500, but unfortunately this didn't help.
The errors in the eventlog are gone, but even after restarting the IS some users still have these problems.
One user reported that it takes about 7 minutes for a read mail to actually switch to "read" when looking at his inbox.
Did anyone else notice these problems? And maybe have a fix for them?
I really don't want to roll back the update :(
I even rebooted the Exchange Server after installing the rollup even though that wasn't even necessary
Thanks in advance!
Regards,
Jeroen

Correct - http://support.microsoft.com/kb/2925273 discusses this issue.
If you do raise a support case to request this, please ensure that you review and understand the requirements for IU installation and removal.
For example:   You *MUST* manually remove it prior to installing Exchange 2010 SP3 RU6.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

CD Driver Issues after installing 11.1.4

After installing Itunes 11.1.4, my HP computer, running Windows 7, could no longer find the CD drive. Upon investigation, someone suggested I update my registry to remove some entries. I did the following:
Start, enter regedit in search bar,
Open regedit
Left hand menus click HKEY_LOCAL_MACHINE
SYSTEM
CURRENT CONTROL SET
CONTROL
CLASS
Then need to find {4D36E965-E325........... (are more figures but not needed)
on right hand window see if there is an upper filter or lower filter.....right click and delete the values if either are there.
RESTART...
This worked, but now Itunes complains every time I open it, saying some registry settings are missing for my CD drivers. I've used Itunes on this computer succssessfully for years, until this upgrade. Apple, whatever you did, please undo it. Horrible release...

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Facetime issue - after installing a new logic board due to liquid damage.

I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk.
I tried to log in using my apple id ( which is verified) it couldn't log in beacuse "could not sign in. please check your network connection and try again"
and i did all the updates of mavericks. i tried also before installing mavericks i thougt upgrading will fix it..
i saw on forums that i should add 2 DNS's (8888 and 8844) didn't work.
i tried connection to my phones hotspot - didn't work.
i also went to the firewall thing to allow it recieve cennections..
pleassee help!!
is there a way to reinstall the facetime or something?!?!?!

My problem solved could possiblly be your solution: Check to make sure your system serial number is being read by your logic baord. If the tech forgot to reenter the serial number, it's a known issue for Facetime and Messages (apparantly not know enough yet though, no tech bulliten exists on the topic).
I spent several days trouble shooting my inablility to login to my account with Facetime or Messages (other cloud services worked) after upgrading to Mavericks. I went as far as doing a clean install on my hard drive after spending two hours with a baffled mac tech in a retail store and many hours searching the message boards.
I have never had a logic board (or hard drive) replaced on my Macbook Air, but somehow after the Mavericks update the logic board stopped reading the serial number on my system. It took a call to Apple and a ticket opened to engineering to figure this out (after I uploaded log files).
They were puzzled I experienced this without a logic board replacement, but it was indeed the root cause of the facetime and messages apps failing to log in, and said they'd run in to it recently more than once.
Wish I knew how to post this unbiquitously across all the boards for folks to troubleshoot by simply looking at their system info in the Apple menu; Apple scheduled an appointment for me at an Apple genius bar and it was fixed in fifteen minutes.

Update_prebinding issues after installing security-update2009-001-ppc

Hi there,
after installing all required software updates including secupd2009-001ppc and installing safari4beta, safari would no longer start up. It just bounced once in the dock and then crashed. After uninstalling safari4beta using the safari4beta uninstaller which is to restore safari3.2.1 and rebooting, still safari won't startup. So I deleted the app and reinstalled it from the appropriate installer. Now at least this works again.
But upon booting (in verbose mode) I get the message that update_prebinding fails due to too many errors. When I try to do update_prebinding manually on the terminal I get the following error messages:
"$ sudo update_prebinding -root -force -debug
dyld: warning DYLDROOTPATH not used because it contains a non-absolute path
dyld: image not prebound, so could not use prebinding in /usr/bin/updateprebindingcore
update_prebinding: warning: could not load /usr/bin/updateprebindingcore: no suitable image found. Did find:
/usr/bin/updateprebindingcore: not a dylib
dyld: image slid, so could not use prebinding in /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
update_prebinding: warning: could not link /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services: dylib not prebound: /usr/lib/libxml2.2.dylib
update_prebinding: too many errors (101)
update_prebinding: error: terminating"
The error message is much longer, but I hope this short version will do for analysis.
How can this be fixed? I read that some people encountered the same problem with secupd2008-006 and that Apple promised to fix it. But this was back in October last year.
I also wonder whether this is an issue with the secupdates or with Safari proper.
Thanks in advance for your help.

It's still broken in my system also. I just got the following in Terminal:
$ sudo update_prebinding -force -root /
Password:
update_prebinding: too many errors (101)
update_prebinding: error: terminating
In addition, the explanatory [support page for Tinker Tool System|http://www.bresink.de/osx/193281/issues.html] that I listed earlier hasn't been changed.
I had a feeling this was the case, because when an Apple software update displays "Optimizing System Performance" at the end of an installation, it is actually updating prebinding. This step used to take a few minutes in my system, which is normal, but for the last few months it has been lasting only a few seconds, probably because it has been terminating prematurely with this error.

[solved] Wireless network issues after installing gnome3

After installing gnome 3 I can't connect to my wireless network any more. I start gnome using 'xinit gnome-session' after loggin in at a command line. Here are some relavent ouptuts:
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:25:4B:8D:B7:07
inet6 addr: fe80::225:4bff:fe8d:b707/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10
eth1 Link encap:Ethernet HWaddr 00:25:4B:BE:74:BC
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:20 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1920 (1.8 Kb) TX bytes:1920 (1.8 Kb)
$ iwconfig
lo no wireless extensions.
eth0 IEEE 802.11 Nickname:""
Access Point: Not-Associated
Link Quality:5 Signal level:0 Noise level:234
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
eth1 no wireless extensions.
Trying to connect to a network through gnome-control-center:
$ sudo gnome-control-center
** (gnome-control-center:6172): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (gnome-control-center:6172): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnection/4
** (gnome-control-center:6172): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (gnome-control-center:6172): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnect
xterm output when trying to connect through the network applet:
Window manager warning: Log level 16: Device activation failed: (32) Insufficient privileges
Last edited by dave1022 (2011-05-14 17:14:12)

iskandr wrote:
Hello,
I'm having problems with my wireless network connections, too. I did a fresh arch install with gnome3 some days ago to avoid any issues when upgrading, but i just can't access any wireless networks now. Everything else works like a charm, though. I followed the usual steps to set up my network/wifi with all the required modules and packages (broadcom-wl from the AUR, etc.) but it doesn't work like it did with gnome2 and xfce4.
My iwconfig/ifconfig output looks like dave1022's. Don't know if this is of any help...
The nm-applet in the gnome3 "panel" actually lists nearby wireless networks, but once I click on one of them, gnome asks me for authentification with my root password (user password does not work). I don't think it should be this way. If I enter my root password here, nothing happens whenever I click on the concerned network to connect to it. I deleted the /etc/NetworkManager/system-connections/<SSID> file to reset the authentification process.
I tried to consult the gnome3 pages in the wiki, but couldn't find any valueable hints either...does anyone have any idea what I might have done wrong or forgotten?
It's exactly the same for me and it's driving me nuts. I'm using iwl3945
[EDIT]
Well... actually installing the applet solved it for me. Is the applet actually needed for Gnome 3 or is a workaround?
Last edited by Slurp (2011-05-14 17:11:19)

MANY issues after installing Windows XP Home Edition with Boot Camp

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
~Twilight

Twilight:
Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
Axel F.

DW CS3 preview issue after installing Vista SP2

I have DW CS3 installed on my desktop and laptop computers. One computer uses vista64 and the other vista32. After installing vista service pack 2, I now have the following issue previewing PHP pages under Apache: All browsers give me a "cannot display the webpage" error UNLESS I am connected to some kind of network--it could be the internet or my peer-to-peer network. My destop computer is attached to a printer via RJ45 cable. If the printer is turned on, I can preview webpages in DW. If the printer is turned off, I cannot! Or, if I am connected to the internet through my wireless internet card, I can preview pages, otherwise, not.
Previous to installing SP2, I was able to preview pages on both computers without the need to be connected to a network, so I am pretty sure that SP2 is involved in this new issue.
When Apache and MySQL start up in the XAMPP control panel, there are no errors, and I can go into PHPMyAdmin just fine.
Has anyone else run into this? Any thoughts?

I'm just following up here. I have not solved the issue, but I did figure out that the problem isn't with vista service pack 2 but with Kaspersky anti-virus 2009.

Internet Explorer issues after installing Update KB2955163 on Windows 8

Dear,
Since we've installed Windows update KB2955163 on Windows 8, we've been experiencing the following issues:
- After using Internet Explorer for a long while (one hour or longer), some websites won't work properly anymore. For example: list boxes and pop-ups don't appear.
- After using Internet Explorer for a long while (one hour or longer), employees can't access any external webpages. They receive a message saying the webpage isn't available. Reconfiguring the Proxy-settings will temporarily fix this problem.
*The above problems don't appear on all of our computers running Windows 8.
We've found the only fix for these problems, is to uninstall Windows update KB2955163.
All of our affected systems are running Windows 8 Enterprise x64, and come from various manufacturers (Dell / HP etc.).
Is anyone of you guys familiar with these specific issues regarding Windows update KB2955163?
Many thanks in advance,
Thom

Hi,
Did this issue occur on all computers which installed that update?
In generally, it's not most likely be Windows update cause.
Let's narrow down the issue:
Have you tried to reset the Internet Explorer to check the result:
1.Close all Internet Explorer windows that are currently open.
2.Open the desktop, and then tap or click the Internet Explorer icon on the taskbar. Changing your settings will affect both Internet Explorer and Internet Explorer for the desktop.
3.Tap or click the Tools button, and then tap or click
Internet options.
4.Tap or Click the Advanced tab, and then tap or click
Reset.
5.In the Reset Internet Explorer Settings dialog box, tap or click Reset.
6.When Internet Explorer finishes applying default settings, tap or click
Close, and then tap or click OK. You'll need to restart your PC for these changes to take effect.
If it persists, perform a clean boot to see if it caused by some third-party software:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

After installing 'Classic Theme Restorer' firefox button not working

installed 'Classic Theme Restorer' to revert back to usable ui.
this hides/removes the firefox button from the toolbar and puts the old firefox button (orange) in the top left corner.
i also added the new 'firefox button' back to the toolbar, since there are options in this menu not present on the old menu.
however, this toolbar button has no effect, and the menu is not opened.
i have already tried resetting the toolbar customization, as well as removing and re-installing the extension.
issue initially started on version 31, and still exists on version 32.0.1
how can i get both the firefox button, addon bar, and stop/refresh buttons to the left of the address bar?

You can try to reset the browser.uiCustomization.state on the about:config page in case there is a problem with the prefs.
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Has anyone else experienced WiFi issues after installing Mavericks?

I recently installed Mavericks on my 2009 iMac. After the initial install, everything worked beautifully. After my first reboot, however, the network is having trouble staying connected to the wireless network. I verified the modem/roouter were working by testing on my other wifi enable devices (iPhone, iPad, Apple TV, etc).
My question really, if whether or not anyone else has experienced this after installing Mavericks official release and is this a known issue that I cannot seem to locate information on.
It should be noted that I often use a VPN service called Private Internet Access. And thought I havent had issues with this before any reboot, I thought it would be worth mentioning.
Thank to anyone's help in advance.

I've also been having a lot of issues with my wireless after I updated to Mavericks. For me, the problem is manifest whenever I'm using my system in a conference room with a lot of other folks who are also using wireless. The connection is up and down constantly, to the point where it's really not usable. Other folks in the room (who are using Windows systems) don't have the same issues. It's gotten to the point where _they_ are making fun of my me and my Mac (the tables have turned!).
I never had these issues when I was using Mountain Lion. Since it's the same environment and the same hardware (MacBook Pro, 15", Retina), I've started to suspect that Mavericks is the culprit.

Issues after installing Classic on OS 10.4

Similar Messages

Maybe you are looking for