Issues after last OS update

Post update, (1) I lost all entries on my Calendar and it does accept any new entries and (2) I lost all files on Remember. Any help????

Which version are you on currently?
If my post has helped you, give it a LIKE

Similar Messages

Youtube issues after last OS update

Dear all,
it is since yesterday that suddenly videos on youtube runs slow, jerky. Also, it looks there are issues with the sounds on quicktime and Itunes. I didn't operate any change on the network, therefore, I believe this is due by the recent OS update I did yesterday. At least the youtube part, I guess it must be somehow related to flash. I tried to uninstall it, but it took forever and I quitted it. I tried to reinstall the Flash 10 version, but also was unsuccesful, all together with rebooting the mac everytime, and having it repairing permissions from disk utility. At this point I'm a bit clueless. Suggestions?
Thanks in advance.

I told you above - you can view your system.log using the Console utility located in the Applications->Utilities folder.
Given what you mentioned, I do think trying to let the Flash uninstaller finish and then reinstalling Flash is your best bet, but that should have nothing to do with iTunes.
Regardless it will be interesting to see if there are any errors of note logged on your system that could provide a further explanation for your issues.
When you say iTunes isn't playing songs, what do you mean?

Battery life poor after last OS update

HI. I updated my Q10's OS last week to version 10.3.1.1565. Since then the battery life of the Q10's battery has reduced from lasting from 6am to 4:30pm with some heavy usage to not lasting past 10am with very little (if any) usage. All apps I run actively during the day is BBM and Whatsapp. Rest of the apps are closed.

iam facing same issue after succesful OS update
1.notification volume have substantialy lowered
2.battery life is poor, after 12am phone is idle till 6am and evrynight phone dies even after 60% remaining battery in morning phone is OFF.
3. phone heats up during calls and when idle

Cannot start mac mini coreduo after last security update

Hi,
after last security update mac mini cannot see anymore the new 7200 rpm hddisk which worked like a charm since that…
When try to boot now I see only a question mark folder…
I can fix permissions via dvd, I can see the mac mini disk if i connet via firewire to another mac,
but cannot boot from it…
tried a kind of tech tool test: it seems that I've got a huge amount of corrupted .plist files…
How could that happen?
does it mean that it's not an hardware issue?
should I reinstall snow?
help me please

tmma.a wrote:
I thought that erasing was formatting as well;
no, it's not. there is probably something wrong with the partition map of the drive which is why your mac firmware does not recognize it as a boot drive when you restart. simply erasing the drive won't fix it. reformatting might.
anyway I'm reinstalling now, if doesn't work will try reformatting too…

IE 11 links open to Blank page after last Window update

IE 11 links open to Blank page after last Window update, I tried every trouble shooting and suggestions I could find in all forums but to no avail.
Operating system Win 8.
will try any suggestions and report back.

Hi,
Not sure whether you have tried these methods, if yes, keep trying the others.
1.Run IE with no add-ons firstly.
Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
If works, please follow the steps to narrow down which add-on cause the issue.
Start IE>Press Alt to show the menu bar>On the Tools menu, click manage add-ons>under show, click All add-ons>disable half add-ons one time for quick narrow down>restart IE.
2.Try resetting IE.
Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Advance>Reset>restart IE.
3. This is caused due to some registry problems occurred. To resolve this issue, follow the below steps:
Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
Type regsvr32 actxprxy.dll in the Open box, and then click OK.
If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
Restart the Internet Explorer
4.if still not work, run system restore.
Start>type system restore in the search box>click system restore>follow the steps in the wizard to choose a restore point.
For more information, please see:
Nothing happens when you click a link in Internet Explorer
http://support.microsoft.com/kb/175775/en-us#method4
Hope this helps,
Ada Liu
TechNet Community Support

IWork (Pages) does not work after last system update!

since some days (after last system update) iWork programms are not starting any more!
macosx 10.7.5 new update
solution atemd: cancel p-ram and p-list, re-installing iwork from DVD and update it from http://support.apple.com/kb/DL1563
macbookpro 2.53 ghz intel core 2 duo, 8 gb ram
any body an idea what i can do to fix it?

hi - i think you should not use 'xhost +' - it's not secure and you shouldn't need it....
in your .bashrc or .cshrc or whatever, you should have setenv DISPLAY .0 or the equivalent export...
then ssh -Y hostname should be all you need... no xhost, and not setting DISPLAY every time...
could you enter the following command from a terminal window and post back the results?
grep X11 /etc/ssh*_config
cheers

After last automatic update, error message XUL Runner error platform version '6.0.2' is not compatible with minVersion 6.0.1. maxVersion 6.0.1. I am unable to open Mozilla Firefox at all. Had to use Explorer to ask this question!

After last automatic update, error message XUL Runner error platform version 6.0.2. is not compatible with min Version 6.0.1 maxVersion 6.0.1 appeared every time I try to open/run Mozilla Firefox.

See:
*[[/questions/869812]]
*[[/questions/869951]]

After last iPhoto update I find Pages documents in photo files

After last IPhoto update 9.3.1, files from Pages are showing up in my photo files. How can I fix his ? Also bought Apeture 3 from App Store . C

I did delete them. Just wonder how/why they showed up. Hope hey stay away. Thanks.

Cannot access internet through itunes after last itunes update. Cannot get to itunes store or itunes help. Everything else works fine.

After last itunes update I cannot get to the internet through itunes. Cannot get to itunes store, itunes help, etc. Also, now when I sync everything syncs properly but I get message at end that tells me that my phone cannot be backed up on the laptop.

Something may be corrupt in your iTunes installation. The backup problem may or may not be related. The first step is reboot your system, disable your antivirus and firewall and try again. The next thing to try is completely removing iTunes and reinstalling: http://support.apple.com/kb/HT1925.
Also, if you used TinyUmbrella or Recboot as unauthorized apps to help with the update they corrupted your network settings on your computer. You will have to edit your hosts file and remove all references to Apple servers.

After last iTunes update 3 days ago, my iPod doesn`t sync with my iTunes. What should I do? :(

After last iTunes update 3 days ago, my iPod doesn`t sync with my iTunes. What should I do?
Regards,
Gisele

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

CD Tray open automatically after last Security Update

when I start up or restart Mymac Pro CD Tray open automatically after last Security Update. Also I could not reinstall Mac OS Tiger because CD Tray open automatically every start up or restart. What's happen? Somebody help me! Please~

Hi.
If you have a USB keyboard and mouse, try unplugging them and then restart. If you have a Bluetooth set, remove the batteries and restart.
See what happens.
Good Luck.

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled. Any fix to make it work?

Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
also there's weird blank space before address in address bar
other extensions and addons seem to be running fine.

jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man

Issues during start-up after last system update

After last update (what a coincidence, isn't it? ) I've begun to notice some "failed" messages during start-up. Here's a part of mu /var/log/messages.log file
Dec 15 20:39:41 felipe load-modules.sh: 'dmi:bvnAmericanMegatrendsInc.:bvrV1.0X:bd05/14/2008:svn:pn:pvr:rvnTobefilledbyO.E.M.:rnTobefilledbyO.E.M.:rvrTobefilledbyO.E.M.:cvn:ct3:cvr:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:LNXSYSTM:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C01:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0100:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0800:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0303:PNP030B:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0000:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0200:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C04:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0B00:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0C02:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:ENE0100:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'acpi:PNP0F03:PNP0F13:' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pci:v00008086d00002448sv00000000sd00000000bc06sc04i01' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'usb:v0C45p62C0d0100dcEFdsc02dp01ic0Eisc02ip00' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dPNP0800' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dPNP0a08' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dPNP0200' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pci:v00001180d00000592sv00001462sd00003FADbc08sc80i00' is not a valid module or alias name
Dec 15 20:39:42 felipe load-modules.sh: 'pnp:dENE0100' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0200' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:dPNP0c04' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cENE0100' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0800' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: Not loading module alias 'pcspkr' because it is blacklisted
Dec 15 20:39:43 felipe load-modules.sh: Not loading module 'snd_pcsp' for alias 'platform:pcspkr' because it is blacklisted
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0a08' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'platform:iTCO_wdt' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: Not loading module 'pcspkr' for alias 'platform:pcspkr' because it is blacklisted
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:dPNP0a03' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0c04' is not a valid module or alias name
Dec 15 20:39:43 felipe load-modules.sh: 'pnp:cPNP0a03' is not a valid module or alias name
Dec 15 20:39:44 felipe ntfs-3g[4727]: Version 1.5130 integrated FUSE 27 <29>Dec 15 20:39:44 ntfs-3g[4727]: Mounted /dev/sda2 (Read-Write, label "OS_Install", NTFS 3.1)
Dec 15 20:39:45 felipe ntfs-3g[4731]: Version 1.5130 integrated FUSE 27 <29>Dec 15 20:39:45 ntfs-3g[4731]: Mounted /dev/sda3 (Read-Write, label "Data", NTFS 3.1)
Dec 15 20:39:48 felipe init: Entering runlevel: 5
Dec 15 20:39:55 felipe dhcpcd[6118]: eth0: acknowledged 172.16.6.127 from 195.117.116.4
Dec 15 20:39:55 felipe dhcpcd[6118]: eth0: leased 172.16.6.127 for 604800 seconds
Dec 15 20:40:01 felipe load-modules.sh: 'platform:coretemp' is not a valid module or alias name
Dec 15 20:40:01 felipe load-modules.sh: 'platform:coretemp' is not a valid module or alias name
Dec 15 20:40:36 felipe atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
Dec 15 20:40:36 felipe atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Dec 15 20:40:36 felipe atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
Dec 15 20:40:36 felipe atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
Dec 15 20:41:57 felipe hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Never seen such things before. What's going on?

Well, the last kernel-headers installation broke the whole system for me :S Let's hope a chroot from Live-CD will do.

G4 won't boot after last Security Update

I have an AGP G4 tower that's been running 10.4.11 fine until today. The last thing I did was Software Update. The only things on the list were an iLife update and a Security Update. I don't know the update number but since I always keep the system updated, I can only assume these two updates were the latest available.
So after the update... I hit the "restart" button but then I get the grey screen with a prohibitory sign and a spinning wheel.
It's not a hardware issue... I can reboot this machine into an alternate hard drive just fine.
I fixed permissions.
I ran disk utility - hard disk checked out ok.
Still can't boot using this drive.
Obviously this last security update broke my system folder because it's as if it can't find a valid system.
So now the question is, what can I do to fix my system folder?
Thank-you.

Simple fix.
I downloaded and installed the 10.4.11 Combo Update onto original drive while booted into the alternate drive. I then downloaded and installed the Security Update 2008-0001 onto the original drive. As a precaution I repaired permissions on the original drive.
Successfully booted into original drive.

Roundcube not working after last php update [SOLVED]

After the last php update my roundcubemail stopped working. The log-in page loads and after attempting to log in I get the following error:
IMAP Error in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube_imap.php (184): Login failed for [email protected] from 192.168.1.1. Could not connect to ssl://localhost:993: Unknown reason (fsockopen() function disabled?)
Last edited by whahn1983 (2014-09-19 18:46:11)

I fixed it yesterday. I modified the PKGBUILD to get the upstream fix.
# $Id$
# Maintainer: Sergej Pupykin <[email protected]>
pkgname=roundcubemail
pkgver=1.0.2.3b55da
pkgrel=1
pkgdesc="A PHP web-based mail client"
arch=('any')
url="http://www.roundcube.net"
license=('GPL')
depends=('php')
optdepends=('python2')
backup=('etc/webapps/roundcubemail/.htaccess'
'etc/webapps/roundcubemail/apache.conf')
install=roundcubemail.install
options=('!strip' 'emptydirs')
source=("${pkgname}::git+https://github.com/roundcube/roundcubemail.git#commit=9a498212446f6c9a186df5652a7625526b590b78"
apache.conf)
md5sums=('SKIP'
'f11b17e2a80b383cde4af963fb307541')
prepare() {
cd ${srcdir}/${pkgname}
sed -i \
-e "s|RCUBE_INSTALL_PATH . 'temp.*|'/var/cache/roundcubemail';|" \
-e "s|RCUBE_INSTALL_PATH . 'logs.*|'/var/log/roundcubemail';|" \
config/defaults.inc.php \
program/lib/Roundcube/rcube_config.php
package() {
mkdir -p ${pkgdir}/etc/webapps/roundcubemail
mkdir -p ${pkgdir}/usr/share/webapps
mkdir -p ${pkgdir}/var/log
cd ${pkgdir}/usr/share/webapps
cp -ra ${srcdir}/${pkgname} roundcubemail
cd roundcubemail
mv .htaccess $pkgdir/etc/webapps/roundcubemail/
ln -s /etc/webapps/roundcubemail/.htaccess .htaccess
mv config $pkgdir/etc/webapps/roundcubemail/
ln -s /etc/webapps/roundcubemail/config config
install -dm0750 $pkgdir/var/{log,cache}/roundcubemail
install -Dm0644 $srcdir/apache.conf $pkgdir/etc/webapps/roundcubemail/apache.conf
# install -dm0755 $pkgdir/etc/php/conf.d/
# cat <<EOF >$pkgdir/etc/php/conf.d/$pkgname.ini
#open_basedir = ${open_basedir}:/etc/webapps/roundcubemail:/usr/share/webapps/roundcubemail:/var/log/roundcubemail:/var/cache/roundcubemail
#EOF
rm -rf temp logs
Then I added these values to my roundcube config:
// IMAP socket context options
// See http://php.net/manual/en/context.ssl.php
// The example below enables server certificate validation
//$config['imap_conn_options'] = array(
// 'ssl' => array(
// 'verify_peer' => true,
// 'verify_depth' => 3,
// 'cafile' => '/etc/openssl/certs/ca.crt',
$config['imap_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verfify_peer_name' => false,
// SMTP connection timeout, in seconds. Default: 0 (use default_socket_timeout)
// Note: There's a known issue where using ssl connection with
// timeout > 0 causes connection errors (https://bugs.php.net/bug.php?id=54511)
$config['smtp_timeout'] = 5;
// SMTP socket context options
// See http://php.net/manual/en/context.ssl.php
// The example below enables server certificate validation, and
// requires 'smtp_timeout' to be non zero.
// $config['smtp_conn_options'] = array(
// 'ssl' => array(
// 'verify_peer' => true,
// 'verify_depth' => 3,
// 'cafile' => '/etc/openssl/certs/ca.crt',
$config['smtp_conn_options'] = array(
'ssl' => array(
'verify_peer' => false,
'verify_peer_name' => false,
It works like a charm.

Issues after last OS update

Similar Messages

Maybe you are looking for