Issues after migrating from 3.0.6.6.5 to 3.0.9.8.3A
G'day All,
Over the last week or so I have performed some test migrations using copies
of our production Portal environment and here are some of the issues that I have encountered.
ISSUE 1 - Performance
Using a stopwatch (primitive, I know) I visited a few parts of our Portal and recorded timings
Performance did not improve dramatically. In fact, after the 3.0.9.8.3A patch, some things slowed right down.
I tested using a Sun Ultra 80 (2 x 450MHz CPUs) our Development host.
(I also tested using a spare Ultra 10 (1 x 333MHz) This was MUCH slower than the numbers seen below)
In all the timings below, I did the following:
1.Logged on as PORTAL30 this takes me to the Portal Home page showing the Build tab
2. Clicked on the Navigator icon
3. From the Navigator Pages section, I clicked on our company homepage
4. From the Main tab on the company homepage, I clicked on our Customer Service tab (one of many that we have)
5. Click on the Ops & Security tab (another one of ours)
6. Click on Logout
Timings are in SECONDS. I ran thru the process at least 3 times and recorded
the final 2 timings to allow for the first time thru populating caches etc.
Pre migration - Portal 3.0.6.6.5 iAS 1.0.2.0.1
Log in 4 3
Navigator 3 3
Homepage 3 3
First tab 4 3
Second tab 3 3
Logout 1 1
Post iAS migration - Portal 3.0.6.6.5 iAS 1.0.2.2.0
Log in 4 3
Navigator 3 3
Homepage 3 3
First tab 4 4
Second tab 3 4
Logout 1 1
** No significant difference
Post Portal migration - Portal 3.0.9.8.2 iAS 1.0.2.2.0
Log in 3 3
Navigator 3 3
Homepage 3 4
First tab 4 4
Second tab 3 3
Logout 1 1
** No significant difference
Post iAS Patch 1866039 Required by Portal 3.0.9.8.3A
Log in 3 3
Navigator 3 3
Homepage 4 4
First tab 4 4
Second tab 3 3
Logout 1 1
** No significant difference
Post Portal migration - Portal 3.0.9.8.3A iAS 1.0.2.2.0
Log in 3 3
Navigator 19 19 !!!!!!!!
Homepage 20 21 !!!!!!!!
First tab 3 3
Second tab 3 3
Logout 1 1
** Bringing up Navigator and the first page from Navigator now takes ages.
Analysing PORTAL30 objects using wwsbr_stats.gather_stats made no difference
to the above timings.
Anyone have any ideas about this???
Bear in mind that this slow down probably only affects me as the
developer since end users pretty much stick to the tabs on the homepage
and never need to use Navigator.
And end user login and presentation of the company homepages takes about 4 seconds.
ISSUE 2 - Fonts
During the migration, many of our developed forms/reports now contain headings/labels that
are so small as to be unreadable (eg 1 point in size)
This seems to be due to the fact that originally the fonts were sized as (-3, -2, -1, 0, +1, +2, +3)
relative sizing. This has been screwed up during migration and has ended up as fonts
being sized 1, 2, 3 points in size.
I will have to visit each form and report and set sizes accordingly.
The PEOPLE_APP application supplied by Oracle also suffers from this problem and is a little harder
to fix. (Check Metalink)
ISSUE 3 - Menu permissions
I have a couple of menus that are only viewable by certain groups.
This permission disappeared along the way leaving the menu NOT visible to anyone.
I will have to visited each menu and set permissions once again.
I hope this list may help others embarking on the same migration path.
I would highly recommend copying your production environment and practising on the copy first.
Regards,
Tony Cook
eSign Australia
[email protected]
Further to the performance problem above, I found the following bug on Metalink:
Bug Number: 2391402
PERFOMANCE DEGRADATION WITH 3.0.9.8.3 ON IE
Funnily enough, this bug was meant to be addressed by the 3.0.9.8.3A patch that I had already applied.
After reading the bug report I added the following line to httpd.conf
BrowserMatch "MSIE" nokeepalive downgrade-1.0 force-response-1.0
I am now seeing the following timings
Log in 3 3
Navigator 3 3 !!!!!!!!
Homepage 3 3 !!!!!!!!
First tab 3 3
Second tab 3 3
Logout 1 1
There is a 15 second timeout that was adding to the response times I was seeing prior
to making the change to the httpd.conf file eg. 19 seconds down to 3ish
Regards,
Tony Cook
eSign Australia
[email protected]
Similar Messages
-
2007 MacBook Pro issues after migration from 2011 iMac
I recently bought a used 2007 Macbook Pro. I was not very familiar with migration, and I realize now I should have done a bit of research before migrating from my iMac (mid 2010) running 10.8.5. I saw the message saying I should update software, but I couldn't figure out how without logging in, and getting on my network with the MacBook. Anyway, I did the migration. My first issue was the MacBook would not let me log in. I finally got it by resetting the password using a 10.6.4 install disc that came with my iMac. The issues I have now are lots of things either won't work, or I have to run them in 32 bit mode. I'm thinking it's because the newer versions residing on my iMac won't work on the older MacBook. I am unable to open iPhoto, and Desktop & Screensaver, Energy Saver in system prefs. I had to run Mail, iCal, and Contacts in 32 bit. I do not have a disc for Lion, but I just ordered it from the Apple Store. I'm wondering if I shoud just start fresh when I get the disc, or is there any fix for my ignorance? Is a new migration out of the question since the Lion is the most I can run on the MacBook while I'm running Mountain Lion on the iMac. I would really appreciate any advise!
Thanks,
JeffJeff,
what you’ve bought is the ability to download Lion from the Mac App Store, not a DVD. To be able to access the Mac App Store, you will need to have Mac OS X 10.6.6 or newer installed. The person who sold the MacBook Pro to you should not have included Lion with it, because any version of OS X downloaded from the Mac App Store is non-transferable; he should have included its original two grey installation DVDs, because those are transferable with the MacBook Pro.
Since you’ve now purchased Lion, you will be able to install your purchased version onto your MacBook Pro; however, to associate your MacBook Pro with your Apple ID (and thereby end the association of your MacBook Pro with its former owner), you will need to do a clean reïnstallaton of OS X onto it. To do a clean reïnstallation of OS X, you will need either the original model-specific pair of grey installation DVDs, or the white retail Snow Leopard DVD. It would be best to have both the grey DVDs and the Snow Leopard DVD, since the Snow Leopard DVD does not come with either the iLife applications or the Apple Hardware Test for your MacBook Pro, and your model’s grey DVDs will not let you get to Mac OS X 10.6.6 to have access to the Mac App Store. -
Web-part issue after migrating from 2010 to 2013
Hello all
Correct me if I am posting this question in the wrong section.
The background is: Migrating and Upgrading SP2010 to SP2013. I did it, and alot of it works, as it should, though I have one issue.
I did deploy all the solutions to both the 14 and 15 hive, and activated all the propper features. Now, I have one web-part which breaks down. It is a Web-part that communicate with a SAP endpoint, to retrive some data and show dem. The Web-part work fine in
the 2010 environment.
As soon as I enter the site where the Web-part is placed in, I am being redirected to the "Maintanence Web-part, error message". If I delete the Web-part I can access the site with no errors. The code works fine in 2010.
The error I am getting is "value cannot be null".
Unexpected System.ArgumentNullException: Value cannot be null. Parameter name: uriString at System.Uri..ctor(String uriString) at Microsoft.SharePoint.SPSite..ctor(String requestUrl) at MyWebPart.Core.ListConfiguration.<>c__DisplayClass1.<GetKeyValue>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at MyWebPart.Core.ListConfiguration.GetKeyValue(String key) at MyWebPart.OrderCatalog.OrderCatalogUserControl.FillFilterBoxes() ... 438bb29c-c202-3049-9aab-e895c85176d5
Unexpected ...at MyWebPart.OrderCatalog.OrderCatalogControl.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.AddedControl(Control control, Int32 index) at MyWebPart.OrderCatalog.OrderCatalog.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Control.PreRenderRecursiveInternal() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesB... 438bb29c-c202-3049-9aab-e895c85176d5
Unexpected ...eforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 438bb29c-c202-3049-9aab-e895c85176d5No, I did not migrate the content from 2010 web-config to the 2013 server. This is something I will take a look at, to see if there are some missing points in the config-file of 2013.
And just to be sure, when we are talking about the config file, it is the one who is associated with the Web-applikation? So, IIS --> WebApp --> Explorer --> and that web.config? -
Replication Configuration issue after migrating from SQL Server 2005 to SQL Server 2008 R2
Hi All,
This weekend we have migrated one of our Core system from SQL Server 2005 SP3 to SQL Server 2008 R2 SP2. Migration went successful. However when we are trying to Configure transaction replication we are getting below Error:
Msg 21854, Level 16, State 1, Procedure sp_MSrepl_addarticle, Line 573
Could not add new article to publication 'abc' because of active schema change activities or a snapshot is being generated.
Background:
Database compability Changed from 90 to 100.
A quick Help would be appreciated.
Best Regards - Viral
Thanks - ViralIs a snapshot being generated? the message seems to indicate one is.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941 -
After migration from SP2010 to SP2013 event receiver code is not working
we have two lists work order list and estimation list. we developed infopath form for work order list , in that we have work order field we don't enter the value of that field after filling the all fields when i clicked save button work order ID field
will generate automatically and estimation hyper link will generate.when i click on estimation link estimation list will open, inthat list we have work order id filed it has to generate automatically(It will fetch the data from work order list). For generating
automatically we written event receiver code in visual studio 2010.After migration from SP2010 to SP2013 it is not working. May i know what modification we have to dotry these links:
http://sharepoint.stackexchange.com/questions/75491/sharepoint-2013-event-receiver-on-custom-list-definition-not-firing
http://www.sharepointdiary.com/2011/08/fix-missing-event-receivers-issue-in-migration.html
http://stackoverflow.com/questions/28298707/we-have-event-receiver-code-issue-after-migration-from-2010-to-2013
https://www.linkedin.com/groups/SharePoint-migration-designer-workflow-runs-3664766.S.5905212303858479106
http://channel9.msdn.com/Series/Reimagine-SharePoint-Development/Migrating-a-SharePoint-Event-Receiver-to-a-Remote-Event-Receiver
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing -
Can only access emails through OWA after migration from exchange 2007 to 2013
can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Testing of SAP BW system after migration from OS Unix to windows
Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
NeerajHi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation PHASE 1
Review New Functionality Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade Install GUI's for Upgrade Test persons
"Check Prerequisites -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems APO
ECC6.0"
Check Compatibility Reqs with 3rd party software ?
"Test Team 2004s Delta Training To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint PHASE 2
Check/CleanUp Development Objects Check all open and not-released developments for release prior to upgrade
Prepare System Setup Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data) BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM -
After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed
Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambarHi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Severe Time Drifting after Migration from 10.5.8 - Help!
Hey everyone, I'm hoping someone can help me out or shed some light on a very odd issue that came about this morning. I'm really having a hard time figuring out a fix.
I recently upgraded one of my old Mac mini servers to some new, (to me), hardware. The old server was a last-gen G4, and the new one is a late 2006 Intel.
The migration went totally fine, and all services are responding and working as expected. This server really isn't used for all that much, so I didn't anticipate any real issues in upgrading from 10.5.8 (PPC) to 10.6.7 (Intel). But after checking everything over this afternoon, I landed on a really weird issue.
I can literally watch the time progress slower on this server. Really. The seconds pass slower, and after about an hour, it will be up to five minutes behind all the other servers in my infrastruture. The server is setup to watch time.apple.com as it's NTP, and there's no change with another NTP server. I can grep the NTPd and it seems to be working fine. I've "started fresh" by removing ntp.conf and ntp.drift, rebooted, and had NTPd recreate them after setting new time and date preferences. That seems to have helped a *bit* but it's still persisting. Time zone information is correct. I've even turned off time sync altogether and it still persists, so it's got to be a local issue with the system.
Now, after some pondering, I believe I know what's causing the issue. The person I inherited the server from replaced the stock 1.5 Core Solo with a 1.66 Core Duo, which I've seen done plenty of times before, and never heard any real issues with. And I did physically check the upgrade, and everything seems to be perfect. The system sees both cores fine, and everything is stable. Except this very odd time/clock issue. This is the only root cause that I can possibly think of for it doing this.
And what's odd, is that if the time is wrong in the menu bar, and I go into the Time and Date prefpane, it instantly updates to the right time.
Now really, this isn't *that* big of a deal for this server. None of it's services rely on perfect time, (Kerberos and whatnot), but it's still rather annoying, especially for Time Machine backups. My main curiousity is if anyone knows how to increase the interval for NTP syncing with time.apple.com, so it'll check every hour or so, (I believe it checks every 12 by default. Correct me if I'm wrong).
TL;DR
After migrating from Leopard Server (PPC) to Snow Leopard Server (Intel), my system clock is running about five minutes slow per hour. Suspecting processor upgrade is to blame. How can I increase NTP syncing interval with time.apple.com?
Thanks in advance everyone!You can add/modify the minpoll and maxpoll values in ntp.conf. This should allow you to set the time poll and reset a bit more aggressively.
The Xeon chips have been notorious for time skew. I've not seen the same with CoreDuo and Core2Duo.
You may also just want to periodically stop and start the NTP process. This can be down using systemsetup command: systemsetup -setusingnetworktime on/off
In corporate environments with Windows time servers that reboot frequently, I tend to automate a script that stops network time, waits a few seconds, and then starts it again. This will force a sync.
Hope this helps. Oh, and by the way, time is critically importation to Kerberos authentication and authorization from the client. Next the DNS, time is the most common cause of access denial. Keep DNS and time healthy. -
After Migrating from 10g to 11g Geeting problems with Guided navigations.
After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;" -
Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g
Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards -
NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g
NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya -
Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion
Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Cant find my iTunes library after migration from old PC to new Mac
Can't find my iTunes library after migration from old PC to new Mac?
Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer. -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya
Maybe you are looking for
-
I had previously had an iphone5 but it got stolen and I just got the iphone5s. I had previously backed up my old iphone to my itunes, and didnt have time to restore it to my new phone. I had taken pictures with my new iphone and when i connected it t
-
I just get a blank screen whenever I click on iTunes store.
I recently had a virus in my computer. Ever since I got rid of it my iTunes seems to be acting up. Whenever I open it up, the program is displayed as "Previous iTunes Library" and whenever I click on iTunes store it just shows me a blank screen. Any
-
Email message redirect - purpose of this function??
I had always thought that the message redirect function in Mail was effectively a shortcut to start a new message with the identical body to a message already in my inbox. As a result I've had quite a disaster. I customized some Apple stationery with
-
Delphi / Crystal Xi OLE updating problem
I have Delphi 7, Crystal Xi and am using the VCL components. I realize that the VCL and Delphi 7 are both outdated. I have an existing report that I updated to include a Word Document as a linked OLE object. When I update the Word Document and go int
-
Error : Creating identity management realm
hello i just created a realm by folowing the tutorial in this url : http://www.oracle.com/technology/obe/obe_as_10g/im/realm_mng/realm.htm and i got a weired error when i try to fill the directory configuration (step 12) by entering the following val