Issues after updates - Mountain Lion

I just installed updates for iphoto and imovie.  Then I installed upate to Mountain Lion.  Now iphoto and imovie "crash unexpectedly".  When boot in "Safe mode" both iphoto and imovie load but problems - iphoto wont display photos in library unless swiping through images - otherwise blank window where photo should be.  imovie doesn't load previously created movies. 
Don't know if this iphoto problem, imovie problem or Moutnain Lion problem....Love to restore to previous version but of course I didn't bakup...Help....
Any suggestions....
Neil

Problem solved through Apple Support. Thank You Brian and Leroy.
Had me delete iMovie and iPhoto. Reinstalled from original disc. Updated with current versions. Problem pesisted.
Reset PRAM - Command+Option+P+R while restart
Reset SMC - Lft Shift+Control+Option while restart
Problem persisted.
Restored OSX Mountain Lion - Command+R while restart. Followed prompts. Redownloaded and installed.
YES! FINALLY! 3rd time is the charm.
Again, thank you!

Similar Messages

  • After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails

    After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails;
    I have updatet Mountain Lion and since then, Mail & Safari keep crashing plus: WLAN Connections keeps on failing from time to time.
    My Router has the newest firmware, i am clueless what to do.
    I even cannot shut down my mac properly.

    Hello you all,
    I also had the problem of a disconnecting wifi while my imac was sleeping. I did not have the reconnecting issue after sleep, but the lost connection issue during sleep which made it impossible to reach my imac for things like homesharing, apple tv or remote desktop. I have a late 2012 iMac with a clean ML 10.8.2 on it and wirelessly connected to an apple time capsule (same as an airport extreme). My partner has a mid 2007 iMac, also with an ML 10.8.2 on it.
    I tried every single solution I could find on the internet, such as changing the router's security from wpa2 to wpa, changing the MTU from automatic to manual 1453, router reboots, re-installations, re-configurations, keychain clean-ups, everything.
    Eventually I solved my problem with these steps and now it works as a charm. I can still find the iMac with the remote app, even after 12 hours of sleep:
    My time capsule router is set on automatic MTU and encrypted with WPA2 and I use  the 5Ghz network!
    1. Cleaned all the wifi passwords in keychain on my iMac
    2. Created a new network location in system preferences
    3. In this location I deleted the bluetooth pan and bluetooth dun connection.
    4. In this location I changed the preferred connection-order to wifi on #1 and ethernet on #2.
    5. Restarted my iMac.
    Now I still have a connection when it sleeps and I can wake it to low profile using the remote app (homesharing) and everything works fine.
    Hope more people wille be helped by this.

  • Canon Pixma MP 540 does not scan any longer after update mountain lion. printer works normally. Who can help.

    My Canon Pixma MP 540 does not scan any longer after update mountain lion. MP Navigator EX 2.0 starts and immediatley stops and comes with this message:
    Application Specific Information:
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSImageCell loadingState]: unrecognized selector sent to instance 0x825c0f0'
    Printer works normally. Who can help.
    Thank you
    PeterPan52

    Hi
    Did you find a solution to this ? I amhaving same problem
    Thanks

  • Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

    Has your problem been solved by the updates??
    Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
    MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
    Microsoft Office 2011:  version 14.2.3
    Mountain Lion: 10.8.2 (12C60)

  • My macbook pro retina is not working camera after updating Mountain lion.

    My macbook pro retina is not working camera after updating Mountain lion.
    I have also updated to latest update 10.8.1. Still its the same.

    Reset SMC.  http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • I can't open iCal after updating Mountain Lion

    After updating Mountain Lion, I can't open iCal. It keeps reopening and sending report to Apple if I press restart.
    What can I do?

    Welcome to Apple Support Communities
    Open Finder and delete:
    ~/Library/Caches/com.apple.iCal
    ~/Library/Preferences/com.apple.iCal.plist
    If it doesn't help, press Command and R keys in boot and reinstall OS X

  • After updating mountain lion, my key is locked but pad works. I cant login of course.

    After updating mountain lion today, my keyboard is locked but the pad works. I can't login of course.
    I would really appreciate anyone's help!

    Hope info from this article helps.
    If other keys don't work
    http://support.apple.com/kb/PH10680
    Best.

  • Ethernet connection issues after installing Mountain Lion

    After installing Mountain Lion I can't get my iMac to connect by ethernet. It says that no cable is connected. The cable/connection is fine. When I plug in my MacBook Pro running Lion, the ethernet connects just fine.

    same exact problem.  in fact, my iMac24 (2009) worked flawlessly until I installed the latest update to Mountain Lion.  I then checked my MBAir (2011) and it too has a problem when using the USB/Ethernet adapter.  Neither can get an ethernet connection.  I deleted my network preferences and rebooted my machine, played around with my Ethernet switch and even reboot my gateway/router.  I've never had to do any of this to my network until Mountain Lion.  Wireless is the only thing that continues to work on both machines.

  • HP Printer issue after installing Mountain Lion

    Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem.  Here's the original question and I will  continue the explanation after this....
    Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it.  I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac.  The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all.  It was connected wirelessly via router.  After downloading Montain Lion I notice the printer intermittently lost connectivity.  The only way to print was turn off and turn on and it will print fine until the next time.  Now out of the blue it's doing the same thing so frequently I can't print a complete document at all.  It starts, and finish without printing the entire document or not connect at all.  I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work.  Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing.  It connects fine (either via IP or USB) and it last connected only for a minute or two.  That's it.  It's a shame, because I like the printer.  The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages.  It has 70% of ink still.  Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
    1.  Remove the printer
    2.  Update the drivers
    3.  Assign a static IP address to the printer
    4.  Connect via USB
    5.  Disconnect the  printer for a while and restart the whole process again
    6.  Did a "cold start" to the printer
    I don't know what to do, and I don't want to spend more $$$$$ on a new printer.  Is Montain Lion to be blame for?  Please advise me.
    Any help will be greatly appreciated.
    At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline.  Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all.  I even downloaded Mountain Lion again thinking of any flaws during initial installation.  I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work.  What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works.  I don't want to have a new printer and find out it does the same thing.  I can't keep myself away from blaming Mountain Lion.  IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER????  PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT.  Just saying... I am totally frustrated.  I guess the next step is to get a baseball bat and fix the printer once and for all.
    Any help will be greatly appreciated.

    Any fix for this? I have the same problem after upgrade.  It's off by many seconds.  Thank you.

  • Startup issues after installing mountain lion

    Since I updated to mountain lion two days ago I'm having issues starting my mac after system shut down. When I switch my mac on I get a black screen with what looks like DOS writing, it won't go to the login screen unless I hold down the power button till it shuts down then switch it on again then it will boot fine! I've tried repairing disk permissions but this has not helped.
    Any ideas?? tried ringing apple but they're closed :-(

    Hi Guys...
    Sorry its taken me a fews day to get back, well as it stands the situation is still the same!
    Heres what I've done so far:
    reset the PRAM - no joy
    reset the SMC - no joy
    ran the disk repair in recovery - no joy
    repaired disk permissions in recovery - no joy
    reinstalled mountain lion - no joy
    but I think I've narrowed down the problem from the log console, it would appear that my imac is automactially booting into single-user mode.... see below.
    01/08/2012 12:03:00.706 com.apple.launchd[1]: *** launchd[1] has started up in single-user mode. ***
    01/08/2012 12:03:00.709 com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
    01/08/2012 12:03:00.712 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    any ideas on how to rectify this would be great please...

  • HP Envy printer issues after loading Mountain Lion

    Hi Since loading Mountain Lion on Macbook Air Command P on a web page prints only part of that page? For example in printing a bank statement, the description but not the amounts printed and many of the headings did not print.

    Thank you to all but after rebooting, problem seems to have disappeared.

  • Slow safari after updating mountain lion to 10.8.3. How can i fix this?

    Ever since I updated my Mountain Lion about a week ago, Safari has been unbelievably slow.  i always get page load errors or the status bar only fills 1/8 of the way.  Firefox is still fast and I haven't done anything out of the usual on sfari. how can I speed it up? Thanks!

    Try a different DNS service.
    Open System Preferences > Network > Advanced > DNS
    Click + and type in the following address:
    208.67.222.222
    Click + again
    208.67.220.220
    Quit and relaunch Safari to test.

  • After updating mountain lion it doesn't show mountain pic ?

    after updating when i check about this mac it doesn't show any Lion pic..
    is this ok or i need to do something else..

    There won't be any picture under "About this Mac..." just the OS X version, etc.
    Clinton

  • HT4718 About Lion Recovery issues after installing mountain lion

    After finishing the installing process of OSx Mountain Lion from the App store, and trying to boot, an error was presented saying failed to create Recovery boot, so I got stuck.
    Now anybody knows if possible to install correctly, without creating an external drive with installation of OSX and recovery boot first?
    Tx
    Mario

    Here's a working bootcamp hard drive ( OSX 10.7 & Windows 7 ):
    MacBookAirs-MacBook-Air:~ macbookair$ sudo fdisk /dev/disk0
    Disk: /dev/disk0          geometry: 30515/255/63 [490234752 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  244140624] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [ 244550264 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [ 245821440 -  244412416] HPFS/QNX/AUX
    So do I just need to turn the 0C on my mac mini to a 07 ?

  • Wifi no longer works after update mountain lion

    Ls,
    I've updated my MacBook Pro to Mountian Lion yesterday.
    Ever since the update I've lost the ability to use the internet over Wifi.
    The system shows a check mark on the left of my network list, however there is no outside connection.
    I have ran the assistant (assist me...) to trouble solve. My modem has been reset.
    My iPad, iPod and Apple TV can all connect without a hitch. leaving me no choice but to ask my question here.
    I was hoping that this problem had been posted previously so I would not have to expose my nowbness
    Looking forward to an answer!
    Kind regards,
    Reese

    I Read this sollution elsewhere on these forums and found that this worked for me.
    However, the "load" time in Safari is not as fast as it used to be. Might be due to some router setting.
    Solution:
    For all the Dutch users that have a KPN Experiabox router:
    1) go to http://192.168.2.254
    2) Username: KPN Password: leave empty (You might have changed this yourself)
    3) Go to Network (at the top)
    4) Go to WLAN (at the left)
    5) Set as follows:
    Enable WLAN: Enable
    Mode: IEEE 802.11g Only
    Channel: 7
    Transmitting power: 100%
    Enable WMM QoS: Disable
    This fixed my wifi problems. Good luck

Maybe you are looking for