Issues and Trouble shooting steps in NWDI Track
Issue: Getting below error while saving the track in NWDI.
ERROR: SLD name-server configuration error: More than one name server configured in SLD
The message may also look as follows:
Unexpected error; inform your system administrator: < Localization failed:ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages' ,ID='SLD name-server configuration error', Arguments: [] > : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error. Please read SAP Note: 1118009.
Solution: As per SAP Note 1118009,
1. Log on to the SLD used by CMS with SLD administrator authorization.(The address of the SLD used by CMS is contained in CMS WebUI in the Landscape Configurator in the domain data).
2. Navigate to 'Administration -> Content Maintenance -> Subset:Landscape Description and Class: System Landscape Directory (or SAP_SystemLandscapeDirectory)
3. At least two System Landscape Directories should now be found.
4. Choose the first SLD to view the details. If the entry 'Name Server'exists under 'Roles, this SLD acts as name server.
5. Return to the overview screen and choose the next SLD. Does this SLD also act as name server?
6. Proceed until you know which SLDs act as name server.
7. Since CMS accepts only one name server, you must decide which of the specified SLD servers should act as a name server in future.
8. Once you have decided, remove the role 'Name Server' from all other SLDs. To do this, select the SLD server, and, under 'Roles' remove the role 'Name Server'. Save all of your changes.
9. At the end, only one SLD server should have the 'Name Server' role.You can now save tracks in CMS again.
Thanks for sharing the solution.
Regards,
Pramod
Similar Messages
-
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
My ipod touch is not showing in itunes therefore, not syncing. I've gone through the trouble shooting steps about 5 times.
Did you try here:
iOS: Device not recognized in iTunes for Mac OS X
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Next try on another computer to help determine if you have an iPod or computer problem. -
I have tried every trouble shooting step there is. restarting my computer amd restarting my device. It died while i was at work and when i went to plug it into my car charger all i saw was the apple logo coming and going. so when i got home i put it in recovery mode and tried to restore and I got Error 2001. I have no idea what to do.
Visit an Authorized Apple Service Provider or Apple Store to get it checked. If they can't fix this, you'll have to pay the Out-Of-Warranty-Service fee to get a new replacement for a reduced price:
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help
no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.
-
IOS 5 and DPS issue? Trouble shooting help needed.
I have a reader with a problem. I can't seem to tell him what the problem is and how to fix it. He is the only one that I know of with the problem. Turns out the story the problem happens on is also the story he wrote for the latest issue.
He has an orginal iPad 1, running iOS 5 (I do all my proofing etc off a iPad 2)
My DPS App was updated to v24 to address the crashing issue once iOS 6 came to be. Prior to this current issue being made available.
The first two issue I produced were v23. Latest folio and the one with the problem is a v24
He says he has updated the app itself to the v24 version
This is what he reports keeps happening.....
No matter what I do as soon as I open the current issue and go to my column, on the 3rd page where it says "Make Your Personal Weather Apps" when I press where it says "PRESS FOR INTERACTIVE DEMO," the trouble starts. The demo proceeds for 3-4 pages and then crashes, completely wiping out the entire file. Then I have to go back to the home screen and completely download the entire issue again. I've tried this at least six times, and get the same frustrating results every time !!
Are there known issues with orginal iPad 1's and DPS?
Did he think he downloaded the most recent version of the app?
Is there a real problem? That I can fix?
Wait to see if any one else complains?
Thanks in advance.Thanks again for the help. Here are the IRQ Settings:
IRQ 00 Exclusive System timer
IRQ 01 Exclusive Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 03 Exclusive Communications Port (COM2)
IRQ 04 Exclusive Communications Port (COM1)
IRQ 06 Exclusive Standard floppy disk controller
IRQ 08 Exclusive System CMOS/real time clock
IRQ 09 Shared Microsoft ACPI-Compliant System
IRQ 0A Exclusive MPU-401 Compatible MIDI Device
IRQ 0C Exclusive PS/2 Compatible Mouse
IRQ 0D Exclusive Numeric data processor
IRQ 13 Shared 3Com 3C900B-TPO Ethernet Adapter (Generic)
IRQ 13 Shared NVIDIA GeForce4 MX 440 with AGP8X
IRQ 14 Shared NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 14 Shared Standard OpenHCD USB Host Controller
IRQ 15 Shared NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 15 Shared Standard Enhanced PCI to USB Host Controller
IRQ 15 Shared NVIDIA® nForce(TM) IDE Controller
IRQ 16 Shared NVIDIA nForce MCP Networking Adapter
IRQ 16 Shared Standard OpenHCD USB Host Controller -
The ipod icon does not appear on itunes. I followed all the troubleshooting help. Uninstalling all programs related to ituens and itunes. veryifying uninstall restarting computer, installing again. I bought this ipod at a thrift store. BUT IT WAS BRAND NEW in the package, never opened. checking serial number on apple they want a fee of 19.00 to give me help! I paid 40 for the ipod so not worth it. but if anyone has an idea for how I can get this to work. Pleaseeeee
Did you try everything here:
iOS: Device not recognized in iTunes for Windows
including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this and see if the results help
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem
You do have the latest iTunes, version 11 on the computer, right? -
Airport Problems after update and trouble shooting
Hi There,
I have an Intel iMac and after updating airport i've been having problems with it. I'll be using the internet and all of a sudden it will just disconnect and cannot detect any network connections. Now, i've seen the other posting already about fixing this problem, and I have done what it says to fix the problem by moving the system configuration folder and the com.apple.systempreferences.plist file. After I do this, it works for a few hours but then i have the same problem again. The folder and the file is recreating and i have to follow the same steps and move them again, but then every few hours it keeps getting recreating. Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network. Is there a way to reset Airport to the way it was before i installed the update?
Thanks"Is there a way to reset Airport to the way it was before i installed the update?"
Of course you can erase your hard drive and reinstall up to 10.4.7, and not go any higher. The problem is the 10.4.8 update, or some part of it. The many other updates recently posted for different apps are not part of the cause, so those updates can be installed.
"Is there something that i can do so i'm not constantly moving the files around and having to re-setup my network."
Yes, once you've followed the "restart twice" instructions involving preference file deletion, it appears that by turning off AirPort before letting it sleep, restart, or shut down, those two files will not get the same corruption recreated. Afterwards, you should be able to turn on AirPort and after a slight delay of about six to eight seconds AirPort will be able to reacquire your network.
If you forget to turn off AirPort before sleep, restart, or shutdown, then those files will again be corrupted and you'll have to go through the process all over again. I ran through it about 50 times, changing this and that, and that's all I could come up with.
Hopefully someone else out there with a different perspective will be able to figure out what else needs to be done. -
Ipad also indicates connected to ITunes even when not. Tried to power off and power on again but same message. Also, restarted PC after download of latest ITunes version. When I make the USB connection I get an audible but no message about device connected. No access to Ipad in "Devices" either.
It is seen when I connect cable from ipad to dekstop then I see the message as "Ipad is in recovery mode." How can be solved this problems ?
-
HT3204 rebooting and trouble shooting
has anyone else had problems restoring they're phone with the trouble shootig info provided
Thanks for sharing the solution.
Regards,
Pramod -
Trouble shooting the export function
I am a new user to CS4 Premiere 4.1.0 as part of my master suite program bought 2 weeks ago. I can't find any trouble shooting help or explanation of error messages in the program's help section; I have tried most of the trouble shooting steps (other than reinstalling the entire suite) from the knowledge base on the Adobe site without any success; and finally would like someone on this forum to rescue my newly installed Premiere from disaster. Here is my problem:
---- when exporting utilizing the media encoder; after exporting and clicking on the encoder to start , the program would come back with the following error message " PProheadless has encountered an error. [..\..\Src\Remote Import Module. Cpp-250]". I can't find any reference to this error code and how to fix it on the Adobe website. I have tried to fix it for days now without any results. Without being able to fix this my programs are useless to me.
Not finding any reference on the Adobe manual to the error code or how to trouble shoot the program is really demoralizing and disappointing to me. You can see PProHeadless as a program on the computer's hard drive but you won't find any reference to this program throughout the Adobe website.
For reference my hardware specs. are: i7 920 CPU, 6 G DDR3, Asus P6T professional work station main board, 160 G SSD SATA C-Drive, 1 tera byte SATA D and E drives, the GPU is nvidia GTX 285 with 1 GB ram, 1000 Watt power supply in a mini tower, plus Sony Blue ray, OS is Vista 64 premium. The computer is dedicated to editing video. All programs are loaded on C; the D drive is used as working space and virtual ram. E drive is for storage. The only other program running is Avast anti-virus program. The file exporting problem stays even when Avast is uninstalled. All the devise drivers are Vista 64 compatible. The computer is brand new; dedicated to Premiere - not even Microsoft word is loaded.
In addition to the above exporting problem, every time I switch between loaded programs such as between Premiere and Firefox, the cursor would stay in the "wait" mode, i.e. in a spinning circle, for about a minute before turning into an arrow in Premiere. It almost feels like Premiere has to reload the ram all over again; this is really annoying and time wasting.
If I have known of these issues, I would have bought a Mac Pro with Mac software in the first place.
I would really appreciate some help from friends and experts on this forum. Thank you.Do you have a dynamic or fixed dimension table?
Looks like you have a fixed dimension table here...
Using -> [*] is to specify each instances of that object inside the subform specified... Here if you have more than one PSI into Row5 it would work... But as I understand you have to write only Avg(Row3.PSI, Row4.PSI, Row4.PSI)
If you have a dynamic table and your row is only named Row1... each instances of the row would be Row1[0], Row1[1], Row1[2]
So in your Average function you would only write :
Avg(Row1[*].PSI) and it would return the average of each rows -
Unable to create file - SXMB_MONI -- Trouble shooting
I am replicating Products Data from SRM to MDM. I am using BBP_CCM_TRANSFER_CATALOG report in SRM. This is Proxy-File scenario. After executing the above report, I can seee the Message in SXMB_MONI in PI.
The message has passed through these steps.
Inbound Message (Central) (Green Flag- Scheduled)
Reciever Identification
Interface Determination
Reciever Grouping (Black thick Arrow Head - Scheduled for Outbound Processing)
Message Branching According to Receiver List
Request Message Mapping
Technical Routing
Call Adapter
Response (Black Flag - Processed Successfuly)
I am not able to see the File written at outbound server and target file path mentioned in File adapter.
Can any one please help me in understanding the above sequence and trouble shoot so as to get the file.Hi Sudha
Reciever Grouping (Black thick Arrow Head - Scheduled for Outbound Processing)
Extract from one of forum post .. see if it helps
Register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
To Cancel the messages from MONI with the Status Scheduled for Outbound Process
Schedule the Report RSXMB_CHECK_MSG_QUEUE
SAP_BC_XMB_DELETE
Regards,
Srinivas -
Creating a custom DC in the NWDI Track.
Hi,
How to create a custom DC using NWDS and add it to the NWDI track in 7.0. Your valuable suggestions are highly rewarded.
Thanks!
Surya.Dear Guru's,
When I try to create a DC project in NWDI with vendor as test and DC name as test2, its giving me the following error message and doesn't allow me to create the DC project.
Syntaz of test/test2 is not valid. Invalid name; on this server no names of category SAP_DevelopmentComponentName are allowed at all.
Can you please advice me here.
Thanks. -
How to trouble shoot my HP TouchSmart IQ526
I have a HP TouchSmart IQ526 with Windows 7. Upon powering on the computer it gets stuck on the HP logo screen. After a while i hear a beep from the computer, but it is still on the logo screen. What trouble shooting steps should I do to figure out what the problem is? What do i need to replace?
Hi:
Below is the link to the manuals section for your server:
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=1121516 -
I have tried every step in the trouble-shooting list, and nothing helps. What should I do?
I am having this same issue. I have avoided updating it for months and now that I finally did this is what happens!! My Ipod goes into charge mode, but then as soon as iTunes opens up to sync it says it knows there is an ipod connected but does not recognize it and it will stop charging and just go to the main screen that comes up when you turn ipod on. I even tried Uninstalling and reinstalling like it says and that doesn't work. When I uninstall it, it will let my ipod charge when I connect it to computer. But as soon as I install iTunes again and try to connect it, it tells me the same thing. Now I know why I never update to newer versions, so angry right now. Apple needs to fix this problem cause I've had my ipod for less than a year!!
Maybe you are looking for
-
Dear All, I want to know there is any standard report is available where I can see the incoming payment for customers with Customer code, Invoice No, Invoice Date,Bill amount, Payment due date, Actual payment receipt date and secondly in which standa
-
Hi this is my first time using the Apple Support Sytem. I am having a serious problem with someone who is hacking all of my Facebook account and the person has threated an is stating that they have hacked my iPod touch 8g as well as have images from
-
Regarding QM modules flows in BI
Hi Experts , I need to extarct the data from Base tables QAPP , QALS , QAMV and QAMR tables . Kindly tell me what are standard datasource available on these tables , standard CUBES or ODS for the same . Thanks a loft for your help . Regards
-
Hi I want to send something through RFC adapter to JDBC to update or insert some data and I want to have return code and send it through mail adapter. RFC sender interface should be Async, other interface can be sync or aync but as far as I know, in
-
I cannot find bridge on my computer even though i have uninstaled cs6 and cc says that it is up to date