Issues between Design mode and Preview mode

SERIOUS issues going from Design to Preview in Muse.  Line breaks change, objects on the page shift, etc.  This happens when I look at my page in the preview mode through Muse, as well as when I preview the page in a browser.  I also get a warning message saying there is a font being used that is not installed and has been replaced.  This is a font that I do, in fact, have installed on my system, but after getting the error message so many times, I re-formatted all text to a Web Font called Questrial, and still get the error message referring to the previous font.  SO FRUSTRATING.  Any ideas?

I have this problem where the images are not appearing or are appearing cropped.

Similar Messages

  • Type shift between design mode and preview mode in Muse.

    My type shifts / moves positions between design and preview modes. It then justifies differently in differnet Web Browsers. This mean I end up positioning things incorrectly in design mode to accommodate the error when published. I am using the Droid Sans Websafe font from Typekit but it doesn't seem to matter which font is used as the bug still occurs. See the attached images; the left is in Design and the other in Preview. See how the formatting shifts within the software. Also the weight of the headline FORDNESS changes slighlty. On other pages, this headline shifts a few pixels across and down. Any suggestions?

    Hi,
    Text layout and rendering varies from browser-to-browser (and between Muse Design and Preview modes). This may come as a suprise if you have a Print background, but is the reality of the web medium. I'll point you to some previous forum posts that may be instructive.
    Layout shifts because of line-break changes
    http://forums.adobe.com/message/6032336#6032336
    Layout shifts because of font metrics
    http://forums.adobe.com/message/6045303#6045303
    Text rendering differences (general)
    http://forums.adobe.com/message/4778838#4778838
    Text thickening (specific to Safari)
    http://forums.adobe.com/message/5862858#5862858
    Hope this helps.
    Abhishek

  • Elements in Design Mode and Preview Mode are Different

    I've encountered an irritating problem in Muse. The elements arranged in design mode are shifting erratically in preview mode. I'm trying to set up "buy" links for my client's CDs using amazon, cdbaby, itunes icons. The buy buttons are place below the audio player widget from MuseGrid. Right now they are just pics - no hyperlinks attributed. If anyone has advice, I'd be grateful as this problem is driving me nuts and costing me hours!!! I am using the
    Design Mode                                                                                                Preview Mode

    Hi,
    Please try grouping the objects on the page. It resolved such issues in most cases.
    Regards,
    Aish

  • Text Field location differs on design view and preview mode

    I am using Adobe LiveCycle Desginer ES.  I am updating forms currently created in Livecycle 6 and 7.  I am noticing the text fields are lower on the preview mode than where I have placed them on the design mode. In design mode, they are perfectly in line with the other text.  When going to preview they are off anywhere from a couple centimeters to a couple inches.  I have started over with new forms and had this same problem.
    This issue mostly occurs when I have a text box with a large amount of text and I place text fields over the text boxes.  Has anyone had this issue also?  If so, is there a solution?  This issue never happened in 6 or 7, I am only seeing this issue in the ES version.
    Any help would be appreciated. (I am willing to recreate the forms, but that has the same issue also.)

    In version 7 there were updates made to the text engine. There were situations where things did not align correctly. To solve this there was an option added to allow you to revert back to the old engine. To do this go into the File/Form Properties/Compatibility then click on the button for the Revert Text Formatting and try your form again.
    Note that at some point in time you should update your form to use the new engine and stop using the version 6 of Reader/Acrobat.
    Hope that helps
    Paul

  • Looks good in design and preview mode, online there is box in lower right corner! How to find box and delete it?

    www.nssgranite.com
    Online, scrolling down and to the right, there is a white box that is linked to a different web site of mine. I don't want that box to be there, but I can't find it in design mode nor preview mode when working with the Muse program. Where is it?? I want to delete it!!

    Thank you. However, I went in, expanded every single layer and did not see anything that was missing it's "eye". I clicked and unclicked everything that was a rectangle and found one rectangle that didn't seem to have representation on the screen. I deleted this rectangle from the layers box, uploaded the site to the internet hoping for the best, and unfortunately this did not solve the problem.
    I wonder, should I just create a new page from scratch to replace this page?
    I don't know if you've seen my other question, but this isn't the only problem I am having with my Muse site. The layout is distorted on all but a select size of screen, and most likely I am going to have to revamp things quite a bit to make them work on the average computer display.
    Thank you for any further suggestions because I am totally open to other thoughts on this!!

  • Difference between a Character mode and Bitmap mode reports

    What are the differences between a character mode and bitmap mode reports

    hi saikumar
    In Oracle Reports Designer, character mode, the
    APPLICATIONS STANDARDS REQUIRE the report to be designed in
    ONE FONT/ ONE CHARACTER SIZE. Character mode reports
    generate ASCII output. In ASCII you cannot dynamically
    change the font and character size. The standard is in
    effect so a report prints as identically as possible from
    both conventional and postscript printers....
    by
    stanma

  • Difference between bridge mode and routed mode on CSS

    Hi,
    Could some one tell me the difference between routed mode and bridge mode.
    Regards
    Neha

    Hi,
    routed mode:
    The CSS acts as a router, it routes packets from the client to the server. The server has the ACE configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have different subnets.
    Bridged mode:
    The CSS acts as a bridge, it switches frames from the client to the server. The server has the upstream router configured as default-gateway.
    There is a client-side VLAN and a server-side VLAN. These VLANs have the same subnet, but different VLAN IDs. The ACE bridges the client traffic from the client-side VLAN to the server-side VLAN.
    Bridged mode would be most used in case one cannot change the servers IP addresses, or if address space is an issue.
    Hope this helps.
    Kind regards,
    Dario

  • What is difference between TEXT mode and BINARY mode?

    Hi,
              What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
    OPEN DATASET wl_filename FOR INPUT
                              IN TEXT MODE ENCODING DEFAULT.
      OPEN DATASET wl_filename FOR INPUT
                              IN BINARY MODE .

    Hi vishnu,
    1. files like .TXT files are considered to be text,
       and other files like .EXE . DOC etc are binary files.
    2. In text files, after each line, there are two
       internal binary characters
      one for line feed and another one for newline.
    3. But, we don't have any meaning for it,
       when we view such files in notepad, for eg.
       Hence, to only get the understandable content,
       we should open such TXT files, in text mode.
      (we can also open them in binary mode,
      but we will get two extra characters after each line,
       and such two extra characters are meaningless
      for interpreting the text)
    4. In binary mode, each byte by byte is considered,
       without any meaning.
    regards,
    amit m.

  • Timeline window missing button to switch between frame mode and timeline mode

    I'm using Photoshop CS6 Extended.
    This is what my timeline looks like now.
    In tutorials they refer to a button that should be to the left of the drop menu that says "forever". The button is supposed to allow you to switch between frame mode and timeline mode.
    this is what the timeline window looks like in timeline mode and with the button that allows you to switch.
    I've already tried reinstalling and upgrading to CS6 extended, as some forums suggested.
    Please help. Animation is the core reason that I need photoshop and without this button I'm extremely limited. Thanks.

    OK. This should work. Copy and past the below script into Script Editor, save it as an AppleScript application to the Desktop. Double-click it and it should change to grayscale. Double-click it again and it'll toggle back.
    tell application "System Preferences" to activate
    delay 1
    tell application "System Events"
    tell process "System Preferences"
    click the menu item "Universal Access" of the menu "View" of menu bar 1
    click the radio button "Seeing" of the first tab group of window "Universal Access"
    click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
    end tell
    end tell
    tell application "System Preferences" to activate
    delay 1
    tell application "System Events"
    tell process "System Preferences"
    click the menu item "Universal Access" of the menu "View" of menu bar 1
    click the radio button "Seeing" of the first tab group of window "Universal Access"
    click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
    end tell
    end tell
    tell application "System Preferences" to quit

  • Differences between One Arm and Route modes?

    Hi Guys,
    What are the differences between One Arm and Route modes? Can anyone please explain?
    Krishna

    Hi Krishna,
    Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
    http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
    I hope this helps
    Daniel

  • Difference between Simple maintanence and Export mode and Organisation plan

    Hi all,
    Can any one please explain the difference between Simple maintanence and Export mode and organisational plan in SAP easy access.
    Thanks & Regards,
    Naga

    Expert Mode Infotype Maintenance: This interfaces allows you to edit individually selected objects in OM (Org Units, Positions, Jobs) via infotypes. 
    Expert Mode: Simple Maintenance Interface (PPOM_OLD) is used to quickly create a new Organizational Plan. As a user, you can pretty much maintain large volumes of data very easily ( i.e create several objects simultaneously), without having to go through the more "Performance Intensive" Org and Staffing interface.
    In accessing the Simple Maintenance interface to create your org structure, the initial screen requires you to specify which evaluation path you want to create your org structure.
    Organizational Plan: This is what provides you with a complete picture of an enterprise's environment. It comprises elements (objects like Org Units, Positions, Jobs etc) which are used as building blocks for creating an Organizational structure.
    Need more information? Let me know.

  • What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?

    What is the difference between LTE mode, CDMA mode, LTE/legacy 3GGPP mode, and Global mode in Preferred Network?

        Great question alczervik!
    LTE- is our 4G network.
    All CDMA/LTE Legacy are going to be related to our 1X, 3G/ EVDO network.
    Global is GSM. Meaning you can use Internationally.
    I hope this helps.
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • Difference between maximum concurrency and batch mode in JDBC

    Hi All,
             Could som one tell me the difference between maximum concurrency and batch mode in receiver JDBC adapter?
    Regards,
    XIer

    Hi,
    The Max Concurrancy and Batch mode are used for performance tunning for JDBC adapter.
    Max Concurrancy is possible upto 5 only. so even if you will be taking up 10 it will by-default take 5.
    The number of records being processed depend on the size of each record. for e.g Per minit XI Is Processing 50 Records,It will Take lot of time to process all Records.
    So if you set Max concurrancy as 5 then at time 5 messages will be processed simultaneously.
    In Batch mode it will, collect the multiple SQL statements that will be created for records to be processed and processed at a time. It will  improve performance considerably.
    But Batch Mode is possible with only INSERT, UPDATE, DELETE etc.
    The Stored procedures can be executed with max concurrency
    Thus it completely depends that on the no of records to be processed at a time and volume of Mesasges.
    Thanks
    Swarup

  • Hook to run script between Consumption mode and Contribution mode

    Hi,
    I am developing a Web Portal page with a Region Template. My page will need to have an accordion. My Region Template will push out raw HTML, and I will use jQuery to put accordion behavior on top. However, the jQuery will run at "onload", $(document).ready(function()), to initialize my raw HTML to be an accordion. It works fine in view mode, however when I switch to Contribution mode, the page shows a raw HTML.
    I am looking for a hook that I can run JavaScript when switching between Consumption mode and Contribution mode. This way, I can put my initialization script in that hook. I have looked in the iDoc documentation but couldn't find any.
    I would be grateful if you can help me out. Thank you very much for your time.
    Linh
    Edited by: 942214 on 22-Jun-2012 00:20

    Are you sure your jquery isn't getting called? Switching between contribution mode should cause a full page refresh by triggering the WCM.ReloadURL js function.
    Have you put in debug statements to ensure that the $(document).ready(function(){}); really isn't being called?
    -ryan

  • Using both power saving mode and offline mode caus...

    So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
    Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
    I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
    I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
    I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
    Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
    This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
    If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
    Any help?
    Rob
    PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

    I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
    I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
    http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
    I believe it is a firmware bug that causes this problem.

Maybe you are looking for