Issues between power, usb and airport?

Well, after having my new MacBook Pro for only a couple of weeks, I've come to the conclusion that there are some pretty weird issues between the power manager, usb bus and airport (and from what I've read here, are pretty widespread issues). First, every time I charge the battery, my Logitech MX laser mouse stutters and jumps all over the screen (trackpad works smoothly though). If I turn off airport, the mouse works smoothly again. When the battery is done charging, the mouse will work smoothly again. Second, every now and then (when the mouse isn't connected) the trackpad will start to stutter and jump all over the screen. When this happens, I've noticed that the graphics card is running slowly as well (expose stutters). Both of these issues can then be remedied by one of two actions, either plug something into a usb port, or turn off airport. I am also suffering from the missing first letter issue, which also seems to go away by disabling airport... So, since disabling airport most of the time is not an option, anyone care to take a guess as to how long it will take Apple to come up with a fix to these issues?

TM does not backup to a networked drive in the same way as a directly connected drive. A networked drive requires the creation of a .sparsebundle disc image file that holds the actual backed up files. So when you shift from direct to networked connection TM actually makes a different backup. This is unrelated to the actual type of port connection. So there's really nothing you can do to have TM use one backup for each type of connection used in your situation.

Similar Messages

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

Score Issues between Captivate 4 and 5

Hi Everyone,
We are noticing an issue between Captivate 4 and 5 and we can't seem to figure out what is going on, this issue is with Captivate modules that have no quiz and the completion status is based only on a % of slide views. We publish as SCORM with complete/incomplete and report percent.
With these types of modules created in Captivate 4, the LMS would record a completion and a N/A score. Now, for those created in Captivate 5, the LMS receives a 0% score and the completion. Our end users are really confused as to why they see a 0%. Any ideas on what may be causing this? The LMS is Taleo Learn, formerly Learn.com's LearnCenter.
Any assitance would be greatly appreciated.
Thanks,
Connor

If you can't download any old versions by logging into your account then clearly these have been discontinued. Your best bet is ask somebody to lend you their CD/DVD which you can copy for your safe keeping.
Old products are always discontinued and that is why you should always buy them on a CD/DVD so that they can installed whenever you have a new system or you have a system crash.
Good luck.

Does Apple allow functionality between Logic Pro and Airport Express

That's it... Does Apple allow functionality between Logic Pro and Airport Express.
If not, Why not. It seems like such a logical Apple type solution. I looked and find it difficult to believe nobody has asked the question...

There is your solution: http://www.rogueamoeba.com/airfoil/

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

What is the diference between apple tv and airport express?

I can see tv online in my tv whitout airport express??
What is the diference between apple tv and new apple tv2?

Airport is a router, Apple TV is a set-top box.
http://www.apple.com/airportexpress/
http://www.apple.com/appletv/
Original Apple TV had a hard-drive, and has been discontinued for quite some time.
ATV2 is a streaming only device, smaller, and use less power. It is also now discontinued
The current model, ATV 3, has a better chip allowing for 1080P playback.

Port-Channel issue between UCS FI and MDS 9222i switch

Hi
I have a problem between UCS FI and MDS switch port-channel. When MDS-A is powered down the port-channel fails but UCS blade vHBA does not detect the failure of the port-chanel on UCS-FI and leaves the vHBA online. However, if there is no port-channel between FI-->MDS it works fine.
UCS version
System version: 2.0(2q)
FI - Cisco UCS 6248 Series Fabric Interconnect ("O2 32X10GE/Modular Universal Platform Supervisor")
Software
BIOS:      version 3.5.0
loader:    version N/A
kickstart: version 5.0(3)N2(2.02q)
system:    version 5.0(3)N2(2.02q)
power-seq: Module 1: version v1.0
             Module 3: version v2.0
uC:        version v1.2.0.1
SFP uC:    Module 1: v1.0.0.0
MDS 9222i
Software
BIOS:      version 1.0.19
loader:    version N/A
kickstart: version 5.0(8)
system:    version 5.0(8)
Here is the config from MDS switch
Interface Vsan   Admin Admin   Status          SFP    Oper Oper   Port
                  Mode   Trunk                          Mode Speed Channel
                         Mode                                 (Gbps)
fc1/1      103    auto   on      trunking         swl    TF      4    10
fc1/2      103    auto   on      trunking         swl    TF      4    10
fc1/9      103    auto   on      trunking         swl    TF      4    10
fc1/10     103    auto   on      trunking         swl    TF      4    10
This is from FI.
Interface Vsan   Admin Admin   Status          SFP    Oper Oper   Port
                  Mode   Trunk                          Mode Speed Channel
                         Mode                                 (Gbps)
fc1/29     103    NP     on      trunking         swl    TNP     4    103
fc1/30     103    NP     on      trunking         swl    TNP     4    103
fc1/31     103    NP     on      trunking         swl    TNP     4    103
fc1/32     103    NP     on      trunking         swl    TNP     4    103
Any thoughts on this?

Sultan,
This is a recently found issue and is fixed in UCSM 2.0.3a version .
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCua88227
which got duped to CSCtz21585
It happens only when following conditions are met
FI in End host mode
FC uplinks are configured for portchannel + trunking
Certain link event failures ( such abrupt power loss by upstream MDS switch )
Padma

Connecting a Printer to USB and AirPort Express Simultaneously

I have a Samsung laserprinter - the only connection on it is USB. I currently have this connected to a XP laptop.
Aswell as connecting it to my XP laptop, I wish to share the printer around the house. The other computers around the house are a combination of Macs and PCs.
It sounds like a strange request - but - I want to be able to connect the printer to my laptop and to the airport express (for the sharing part) at the same time.
I notice around the web that there are several devices you can buy, which are effectively USB 'splitters' for connecting a USB printer to 2 USB computers at the same time.
Could I use one of these 'splitters' in conjunction with the AirPort Express? In that way, I'd be able to connect the XP laptop to the printer via USB, and the rest of the house would share via the USB/Airport connection.
(Incase anyone asks, the XP laptop is on a different LAN network to the rest of the house, hence the problem).
Has anyone tried this? If so, can anyone recommend a make/model of such a 'splitter' that is proven to work with the AirPort Express?
(Or even better, maybe there is a device out there somewhere that does this without having to buy 2 devices).
Thanks,
Brad

USB is not designed to have two controllers at a given time. Therefore I would not trust one of these devices. It may damage the USB port on your laptop or the AirPort Express (AX).

VPD date issue between 10.1 and 10.2 databases

I have uncovered an issue today with VPD against date fields. The issue came up at a client site on a 10.2 database. When I got back to the hotel and tried this on my own database, which is 10.1, I got no issue and everything worked ok.
Therefore, I am asking if anyone is able to try out the following for me on different Oracle databases and platforms and let me know whether it worked for you or not. I'd like to compile a list of database versions and platforms on which the issue occurs.
Step 1: create this table as a user
CREATE TABLE TST_DATE AS (
SELECT 1 PERSON_UID,
Trunc(SYSDATE) BIRTH_DATE,
To_Char(Trunc(SYSDATE), 'DD-MON-YYYY') CHAR_DATE,
123456 TAX_ID,
'Smith, Michael B.' FULL_NAME FROM dual);
Step 2: grant select rights on the table
GRANT SELECT ON TST_DATE TO PUBLIC;
Step 3: switch your login to SYS and run this script:
CREATE OR REPLACE FUNCTION F_CHECK_ITEM_TST(p_object_schema in varchar2, p_object_name varchar2)
RETURN VARCHAR2 IS
V_PREDICATE VARCHAR2(2000) := '1 = 2';
BEGIN
RETURN(V_PREDICATE);
END F_CHECK_ITEM_TST;
Step 4: As SYS, run this to grant access rights over the function
GRANT EXECUTE ON F_CHECK_ITEM_TST TO PUBLIC;
Step 5: As SYS, run this to enable the policy
BEGIN DBMS_RLS.ADD_POLICY(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST',
FUNCTION_SCHEMA => 'SYS',
POLICY_FUNCTION => 'F_CHECK_ITEM_TST',
STATEMENT_TYPES => 'SELECT',
POLICY_TYPE => DBMS_RLS.DYNAMIC,
SEC_RELEVANT_COLS => 'BIRTH_DATE',
SEC_RELEVANT_COLS_OPT => DBMS_RLS.ALL_ROWS);
END;
Note: in the above policy change the OBJECT_SCHEMA name to be the name of the user who owns the table you created in Step 1
Step 6: Go into Discoverer Admin and import the table as a new folder.
Be sure to uncheck the "Date hierarchies" box and set "Default aggregate on data points" to detail. Grant access to any user.
Step 7: Using Desktop or Plus, log in as that user then try to query the folder with the date not included, there should be no problem.
Step 8: Now try to query with the date included
On my 10.2 database I get ORA-24334: no descriptor for this position. This happens when logged into Discoverer as the table owner, EUL owner or any other user. However, when logged into Discoverer as SYS which is exempt from all VPD policies, there is no error when the date is included.
We tried this in Discoverer Desktop, Plus and Viewer with the same results in all three. We can successfully query the table from SQL*Plus, SQL Developer and TOAD.
There also seems to be no issue at all with the 10.1 database so there seems to be an issue between Discoverer and the 10.2 database.
What do you think?
P.S. to cancel the policy use this script when logged in as SYS:
EXEC DBMS_RLS.drop_policy(
OBJECT_SCHEMA => 'DRAKE',
OBJECT_NAME => 'TST_DATE',
POLICY_NAME => 'SecByTST');
This same information is available on my blog in a more readable format here:
http://learndiscoverer.blogspot.com/2006/12/vpd-date-issue-between-101-and-102.html

Hi Rod
Well don't you just love Oracle. Obviously, whatever tests were done for certifying Discoverer against the 10.2 database did not include checking VPD policies. This merits a blog entry from me.
Your workaround for V_PREDICATE VARCHAR2(2000) := 'BIRTH_DATE=TO_DATE(''01-JAN-0001'')'; works. However, I had to write a new function to do this because my real function was trapping about a dozen items at the same time, some dates, some numbers and some varchars - exactly the way that the Oracle example code shows it in the 10.2 database manual.
So what I did was to create a new function that only handles dates and added a dedicated policy that works with only that function. Unfortuately, because I have many dates to manage, I was unabe to hard code the BIRTH_DATE so here is what I did:
V_PREDICATE VARCHAR2(2000) := 'SYSDATE = TO_DATE(''01-JAN-0001'')';
This works perfectly and Discoverer stopped complaining. It just has two policies on the same table for different data items. Isn't VPD cool? I'm hooked.
I really appreciate your time and effort on this. Now, let's see what Oracle support make of the issue because I raised a service request last night. No reply yet I'm afraid.
Best wishes
Michael

User synchronization issue between Active Directory and Solution manager.

Requirement:
Synchronize the users between Active directory and solution manager system.
What we did:
1. Created RFC connection (LDAP_RFC) for LDAP connector.
2. Created new LDAP connector that utilize the RFC (LDAP_RFC).
3. Created new logical LDAP Server(CUA).Here we have to maintain the connection
details to the physical directory.
4. We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
5. In transaction LDAPMAP specific SAP data fields, we mapped to the desired
directory attributes.
6. Testing from LDAP transaction working fine. We are able to see the attributes and
values from Active directory.
Issue:
When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
LDAP Server = CUA (created earlier)
LDAP Connector = LDAP_RFC (RFC connection created created ealier)
In the tab: (Object that exist both in the directory and in the Database:)
Selected: Compare Time Stamp.
In the tab: (Objects the only exist in the Directory.)
Selected : Create in Database.
In the tab(Objects that only Exist in the Database:
Selected: Ignore Object.
Result from the report shows that connection to LDAP server is fine and 0(zero) objects in Directory.
The program does not create any new user in the Solution Manager system.
Any help on this issue greatly appreciated.
Thanks & Regards,
Harish

where did you see this error ? is there anymore details.
i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Thanks, Noddy

Interoperability issues between Nexus 5k and HP storageworks (8/20q)

Hello community,
I am trying to get a VM host and a windows server to connect to their storage across a nexus and HP (Qlogic) fabric switch. This is currently having issues with the VM host unable to see the datastores, possibly due to interoperability between Cisco and HP (Qlogic)
I have configured and tested the connectivity using only the cisco nexus and this worked, I then tested it using only the HP fabric switch (HP 8/20q) and this also worked.
However, when using the HP and Cisco Nexus as shown in the attached diagram, things stop working.
The connection is using Native Fibre channel, On the Cisco side I performed the following steps
Configured the Nexus with Domain ID 10 and the HP with Domain ID 20.
Connected the 2 fabric switches on fc1/48 (Cisco) and port 0 (HP) and confirmed that the ISL came up (E_port 8G), I confirmed connectivity using fcping both ways.
I connected the SAN to the Nexus and the servers to the HP
Configured VSAN 10
Added interfaces fc1/41 to 48 in VSAN 10
Created 2 zones ( ESXI and Windows)
Added the PWWN for the ESXI server and the MSA2040 to the ESXI zone
Added the PWWN for the Windows 2k8 server and MS2040 to the Windows zones
Created zoneset (Fabric-A) and added both the above zones in it
Activated the FABRIC-A zoneset
The result is that the zones and zoneset are synchronised to the HP switch .I confirmed that I was able to see the servers and SAN WWN in the correct zones on the HP.
From the 8/20q switch I am able to fcping the SAN, Nexus and servers, however the Nexus is only able to fcping the SAN and the HP, it returns a “no response from destination” when pinging the servers.
I have added the FCID for all the units in the same zones to see if it makes any difference to no avail the result seem to be the same. I have gone through various Nexus/MDS/HP/Qlogic user guides and forums; unfortunately I have not come across any that shows this specific topology.
source for HP user guide is here: http://h20565.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02256394
I’m attaching the nexus config and partial view of the “show interface brief” showing the fibre channel port status
Interface Vsan   Admin Admin   Status          SFP    Oper Oper   Port
                  Mode   Trunk                          Mode Speed Channel
                         Mode                                 (Gbps)
fc1/47     10     auto   on      up               swl    F       8    --
fc1/48     10     auto   on      up               swl    E       8    --
Any help and advice would be greatly appreciated. thanks in advance

Hi all, after much reading, Walter Dey provided the hint to put me on the right track.
By default the Nexus 5k is in interop mode 1. However, one of the requirement for this to be "interoperable" with other vendor the FCDomain ID in the entire fabric needs to be between 97 and 127 as stated in the Cisco website.
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/interoperability/guide/ICG_test.html
Another issue that had me and my colleague scratching our heads, was that we were seeing high level of CRC errors on the ISL interfaces. This was caused by ARBFF settings mismatch between the Nexus and the HP. This was resolved by ensuring that the ARBFF setting on the HP was set to false and the command "switchport fill-pattern ARBFF speed 8000" is configured on the ISL interface linking the 2 switches. (note that Cisco's default setting for the ports is IDLE, until this is changed the link will not stabilise)
Thanks for all your help guys.

Keychain sync issues between new iMac and older 10.4.11 machine

I am having a tough time since purchasing a new imac - I can get mobileme working reasonably well with few issues if I have keychain syncing disabled on both machines but I would like to get to the bottom of this and be able to sync it automatically.
Here is a description of the issues I am getting in spite of performing the regular advice to set up a new account once the issue starts and move all my stuff into that new account.
After a few syncs I get the advice "please enter the password for "(myname), Aos Powerbook G4 17""
Now the A has a double dot (umlaut ?) above it and the o has a ^ above it - not sure how to get that with this keyboard or I would have done it ...
This box is empty below this dialogue (expecting a passcode) and whatever password you enter (I have tried all of mine repeatedly over several weeks now !) it just doesn't accept it. It is as if someone else in a parallel universe has your mac and has entered a new passcode !
Occasionally I will get 'the keychain on '^&G*)(" has been altered do you wish to merge' (not exact text but something like) and I am no longer able to send emails without entering my email account password first and every so often.
There are other weird symptoms too - but does this trigger anyones grey matter ?
IS there an issue between 105 and 104 syncing ?
Thanks
Andy

I should also point out that I have an iphone and this poor puppy has tons of apps and data associated with the apps on it......
Anyone have a clue as to how I back this up with the new pbook user account I have created to sidestep the keychain issue ?
The only option it shows erases the iphone's applications and their assoc data from what I can see ....
Thanks
Andy

Battery power, Bluetooth, and Airport all shotdown

There has been a dvd jammed in my superdrive for about a week now and today I decided to get it out. I took off the bottom unibody panel, removed the superdrive, and took the disc out. When I put it all back together I see that my battery is not powering the computer anymore, the bluetooth isnt available and is reads that there is "no airport card installed". All of which were working before I removed and reinstalled the disc drive.
Any solutions?
I would apprecieate so so much.

power works now, but bluetooth and airport still not functioning at all.

Connectivity issues between Cisco 2901 and Cisco SG300-52

Hello,
I am having some serious connectivity issues between the hosts in my LAN.
My LAN is based on a Cisco 2901 router and a Cisco SG300-52 port switch.
The issue that has been happening is that connections between hosts on the LAN (remote desktop, extended ping, etc) is very unstable, at some point I can see a 35% lost packets on an extended ping. This happens at any time of the day and from any host.
All hosts are on the same Vlan(default Vlan) and on the same subnet. Some hosts have fixed IP addresses (servers and network equipment) and others obtain their IP address trough a DHCP reservation established on the router (reserved with the MAC address of every host).
I can provide further details if needed, because this issue is very serious and I would really appreciate any insight or support.
Many thanks in advanced.
Sair Amer
EDIT: After doing every test we could think of, we finally found the reason behind this problem.
It turns out that the switch has problems handling communications between clients at different speeds, because most of the hosts connected were working at 100 Mbps but the servers were working at 1000 Mbps (and the communication between host and servers wasn't stable).
After manually setting the speed on all ports to 100 Mbps the problems have stopped.
Many thanks for you help on this issue.

Building configuration...
Current configuration : 4123 bytes
! Last configuration change at 12:06:16 PCTime Sat Jul 19 2014 by ccp
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Foninsa
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 $1$BDbJ$HN3VP8nmywrGB55RCxPd30
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone PCTime -4 0
clock summer-time PCTime date Apr 6 2003 2:00 Oct 12 2003 12:00
no ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.151 192.168.1.255
ip dhcp pool FONINSA
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8 8.8.4.4
ip dhcp pool Laptop-Sporta-Wifi
host 192.168.1.10 255.255.255.0
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-213585710
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-213585710
revocation-check none
rsakeypair TP-self-signed-213585710
crypto pki certificate chain TP-self-signed-213585710
certificate self-signed 01
30820229 30820192
quit
license udi pid CISCO2901/K9 sn
license boot module c2900 technology-package securityk9
username ccp privilege 15 password
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 190.196.21.98 255.255.255.248
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip nat inside source static tcp 192.168.1.3 21 190.196.21.98 21 extendable
ip nat inside source static tcp 192.168.1.3 80 190.196.21.98 80 extendable
ip nat inside source static udp 192.168.1.8 1194 190.196.21.98 1194 extendable
ip nat inside source static tcp 192.168.1.4 3389 190.196.21.98 3389 extendable
ip nat inside source static tcp 192.168.1.9 3389 190.196.21.98 10000 extendable
ip nat inside source static tcp 192.168.1.3 3389 190.196.21.98 20000 extendable
ip route 0.0.0.0 0.0.0.0 190.196.21.97
access-list 1 permit 192.168.1.0 0.0.0.255
control-plane
line con 0
password $
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 5
access-class 23 in
privilege level 15
password #
transport input telnet ssh
no scheduler allocate
end

FaceTime volume issue between iPad Air and iPad 2

I've noticed that when making FaceTime calls between iPad Air and iPad 2, the volume on iPad 2 is too soft and the volume on iPad Air is too loud. This only occurs between 2 different type of iPads. If both parties use the same type, the volumes on both sides are roughly the same and loud enough to be heard clearly. I've also verified with Skype which produced roughly the same loudness when video calling between an iPad Air and an iPad 2.
Just hope Apple can take notice of this issue and rectify in the new iOS release.

Yeah, what's up with this? I too have PDF's I want to sync between iPhone5s and new iPadAir. I'm not having luck!. You would think it would be SIMPLE!

Issues between power, usb and airport?

Similar Messages

Maybe you are looking for