Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

Similar Messages

  • Batch determination for process orders

    Hi All,
    My requirement is complete batch batch is proposed in process order  batch determination even though the requirement is of less qty.
    For example the required qty. for component XYZ is 20 units but the available batch is of 40 units. Now requirement is that no batch splitting should happen & complete batch of 40 units is determined.
    This is required to do Material quantity calculation.
    regards,
    Mohit Goyal

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • FEFO logic in batch determination for process order release

    Batch determination for a particular material in a process order was following FIFO logic . We needed to change it to FEFO hence we made the necessory changes in COB1 how ever the process order relase is still taking the batch whihs is not the first expiry batch
    Kindly help in batch determination with FEFO for process order release.

    Rk
    The blw explation for inventory side, i don't have idea for prod order side
    If Batch Management is active for the materials then use following process;
    First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
    Assign this characteristics in CL02 in your Batch Class.
    CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
    Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
    Now do batch determination in MIGO.

  • Batch determination for Process order component

    Hi,
    The Scenario is as follows:
    The batch determination should first consume Unrestricted (UR) stock and then only go for consignment (K) stock.
    Custom development has been done in BADI to meet the above requirement.
    Criteria for selection of UR batches:
    If any of the UR stock batches are available for which UR stock u2013 Reserved stock >=  component requirement qty , then delete the K batches and push the UR batches only to the next step for Batch determination. The deleted K batches are appended at the last step for display after batch determination as per the requirement.
    Now the Client requirement is there should be an option of manual assignment of qty from pre-selected Unrestricted (UR) batch to any of the consigned (K) batch.
    When the above is done, the system says the available quantity of batch (K) was corrected to 0,000 PC and the avialable qty is set to ZERO ( but the stock is available for K batch). Is there any way to address this requiremement?
    Criteria for selection of K batches:
    If any of the UR batches not available for the above condition, Push all the batches ( UR + K)  for Batch determination.
    Regards,
    Prasad

    Dear Prasad,
    if you want K stock ist selected in batch determination you have to run a stock determination within the batch determination. Otherwise you will not get the special stock indicator K in selection result.
    Their is a big restriction by using K stock. You have to make sure that you don't use K stock and free stock for the same batch in the same sloc. Otherwise you will run into problems.
    BR Sabine

  • Automatic Batch determination for process order components

    Hi ,
    If we maintain the batch entry at MRP2 for the process order component  as 3 - automatic batch determination upon order release ,if  automatic batch determination is not happening for the order components and system is stopping to enter the batch for the component at order release , what else settings do we need to check ?
    Please advice
    Thanks ,
    MK

    Hi MK,
    You need to go thru these configurations/setup:
    1- CORC: Search Procedure is enter for Order type and Plant combination (PP-PI)
    2- Assign the Search Procedure in transaction COR4 or OPL8 (COR4 for PPPI ot OPL8 for PP)
    3- Batch Determination condition is maintained in COB1: this will generate the automatic determination of the batches.
    4- Take a look of the field Batch Entry in MM02 (MRP2). This was already done by you.
    Of course all your batches need to have the corresponding classification and you should assign correctly the search procedure in COB1.
    Try with the previous steps and come back if you still don't get the automatic batch determination.
    Best Regards,
    Mariano

  • Batch determination for process order URGENT!!!!!!!!!!

    All,
    I have a strange situation.The condition in the selection criteria is Exp.date >10Days.But when the process order is released the batch is picked which has a past expiration date .what might have gone wrong?Please guide .Thanks
    -Naik

    Naik,
    In format is your exp date. Is it a date or is it number of days after expiry.
    Check this first in the charactristics. Are you using the std BATCH_SELECT class for selection criteria. In this the
    expiration date is of DATE data type. So how can you give > 10 days.
    Try giving like this:
    < 17.06.2007
    Regards
    Ram

  • Batch determination for process order

    Hi All,
    For a finished product, system allows batch to allocate more quantity than the quantity in stock.....
    If you check in MMBE.....stock in unrestricted is 20 kg while stock in scheduled for delivery is 40 kg.......
    Can you please tell how is it possible....that batch allows for more quantity than in stock.
    Thanks in advance....
    Best Regards.

    Hi,
    you should never use MMBE to compare the result of batch determination. Normaly you do an availibility / ATP check within the batch determination, so you have to goto transaction CO09 to compare the result.
    I think you should check your settings in availibility check.
    Regards,
    Sabine

  • Automatic batch determination in process orders

    Hi,
    How batch determination can be done automatically for components in process orders?
    regards,
    Mohit Goyal

    Dear,
    Define the batch determination search strategy for process order in COB1 with sort rule in CU70.
    On the initial screen of your application choose Logistics>centrel function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
    On the initial screen of your application choose Batch search strategy -->Create.
    Choose the strategy type, say choose co02
    Choose the key combination-
    Enter the required dat-->say plant ,production order type, product,valid from and component for which you want to have this
    Choose Selection criteria push button. Choose a sort sequence.
    If no values have been entered, enter the selection class and the characteristic values.
    Go back to the screen on which you create a batch search strategy.
    Choose Sort if required(it should be defined earlier(in CU70- here you are giving the charateristic name on which you want to sort)
    For component you need to use MBC1 with search stratgey as ME01 for your plant movement type and material and assign the sort rule and search procedure here.
    Check also in COR4, for the combination of plant and order type...you have selected search procedure-CO0001
    Batch management> Batch serach procedure allocation and check activation
    T.Code to be looked specifically OMCG , CORC
    Hope it will help you.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 11, 2008 11:31 AM

  • Batch Determination in process orders

    Hi All,
    This is regarding batch determination in Process Orders. We have components which are batch managed. When we do a batch determination system shows up old batches  qty in available qty field in batch determination which were already consumed for different process orders.When checked in stock overview (MMBE) there was no stock available for this material.
    Can you please explain me how the batch detmination in done in the system. Why is the system looking for old batches for which there is no stock available.
    Kindly reply to the mail.

    Hi
    Pl follow the below path and transection and check the settings..if missing pl make necessary settings
    Batch management> Batch serach procedure allocation and check activation
    T.Code to be looked specifically  <b>OMCG , CORC</b>
    Pl reward if this is helpful or come back if you need another help
    BR
    Sumit

  • Exclude quality inspection batche from Batch Determination in process order

    Dear Gurus,
    When doing batch determination in process order, the system taking quality inspection batches for selection.
    I have checked in OPJJ , quality inspection stock is select but if i remove , it will effect MRP process
    How to exclude quality inspection batches from Batch Determination?
    Thanks in anticipation.
    Regards,
    Sandy

    Hello,
    I also have the same requirement. Can some one provide solution.
    Regards,
    Naren

  • Trigger automatic batch determination at process order confirmation

    Hello, colleagues.
    I have a requirement for batch determination triggered automatically for all components when I backflush them in CORK/COR6N transaction.
    Batch determination facility has already been set up both for process order and for IM MvT 261. Everything works perfectly.
    There is only one issue: I have to select components and click "Batch determination" button manually for each partial confirmation.
    I want batch determination triggered automatically when I save confirmation.
    Batch determination at the moment of order release is not an option for the current business enviroment.
    I've checked all relevant threads already, but found no solution.
    The solution seem to be found in this thread but no details provided:
    Automatic batch determination during goods issue
    Any help will be highly appreciated.

    There is only one issue: I have to select components and click "Batch determination" button manually for each partial confirmation.
    I want batch determination triggered automatically when I save confirmation.
    Konstantin,
    As far as I know this not possible with any standard configuration.
    Please wait for other experts comments also.
    Br
    KK

  • Batch determination for subcontract orders in MIGO

    Hi,
    I have a doubt. I´ve customized a batch determination strategy for Inventory Management, for movement type 543.
    When i receive a subcontract order, using transaction MIGO, the batch determination process is NOT triggered automatically, until i press button "Stock Determination".
    Is there a way to determine batches in MIGO without pressing this button? (fully automatic).
    Best regards.

    Hello Alejandro,
    Thanks for the further clarification!
    It depends on how you are processing the goods receipt in MIGO:
    .- If you post the Goods Receipt for the Subcontracting purchase order and you do not expand the components, then just flag the main item and post, an automatic batch determination for the batch component will be processed then by the system and the goods receipt will be processed.
    .- If you post the Goods Receipt for the Subcontracting purchase order and you expand the components, then, the batch field will be opened for input and the user manually will need to start the process pressing the icon for the batch determination (or also the one for the stock determination).
    I hope this helps!
    Esther

  • Manual or automatic batch determination in process order

    Hi, how to know for particular process order, whether we should do manual batch determination or automatci batch determination for components without viewing the material master?

    Dear Sir,
    Used MSC2N, if it allows the cahnge in the no, then it is mannualy cfreate or else it is being created automatically
    Regards
    Bhupendra Singh

  • Batch Determination for  production orders

    Hi Experts,
    How do we set up batch determination strategy for production order.My requirement is" Batch Determination at the time of releasing the orders using : - the FIFO strategy on finished product , - the LIFO strategy on components (raw material)".
    Please help me to setup this requirement.
    Thanks,
    Ravi.M

    Just some simple hints:
    You must create a batch class to classify the materials with a characteristcs for the expiration date.
    There exist std characteristic for this.
    In the material master you have a setting to trigger batch determination at release.
    You must create sort rules sorting this characteristic ascending for FIFO and descendign for LIFO. (CU70)
    For component in production/processs order:
    You have to create a search strategy with of a type included in the search procedure defined in production/process ordeer dependent parametersy og your choice. Tc COB1
    In this you use the sort rule and the batch class as selection class.
    Your finished goods goes to a sales order so you have to craete a strategy there as well.
    It follows similar procedure as above but relates to sales order types and other search procedure.
    Good luck!
    Regards,
    Tor Holter

  • Batch determination in Process Order

    Hi Guys
    I am doing the automatic batch determination on the process order release. It gets rejected and the error is CO 691: You must enter the batch for material 1025301
    Now when I do the manual batch determination in the process order. On clicking the batch determination button I get the message: No Check exist for planning (item: 0010, mat: 1025301) message number C2119.
    Can you guys please advice how to resolve this error please!
    The SAP version in 4.7
    -Rahul

    Hi Ram,
    You are right. I am not getting batches with zero stock.
    By inadequate stock, I mean, say, for a raw material, I find from MMBE 1.448 kgs are there in the unrestricted and 1.448 kgs in reserved for the batch. When I check in the material list of the process order, total 9200 kgs are booked by the batch. How is this possible?
    Does the system cannot do the batch splitting automatically. Because everytime it is not possible to calculate the remaining stock and enter it manually in the order.
    Thanks and Regards,
    Jyoti

Maybe you are looking for