Issues during technical upgrade from 4.6c to ecc 6.0
Hi
We are doing a technical upgrade from 4.6C to ECC 6.0. Some transactions in QM module when tested in ECC 6.0 test client give a abap termination message (or dump) and certain transactions like qs42,46, qa18, qs34 etc do not get executed (error = no entry foound for......) and similarly in PP-PI module transactions like C203 have similar problems, even though master data does exist. What should I look for? Can somebody pl. give details on configuration checks and the OSS notes from a functional point of view for a technical upgrade?
For certain transactions I get the error message - "Central system of distribution SM-P06CLNT430_TRUSTED is unreachable RFC destination SM_P06CLNT430_Trusted does not exist" - what does this mean?
thanks
BE
Hi,
1. Have you done successfull installation from 4.6C to ECC 6.0 at the time of PrePare ans SAPUP?
2. Check SP' for QM and PP-PI modules from http://service.sap.com/sp-stacks.
3. Configure RFC connections correctly, SM_<SID>CLNT<No>_Trusted automatically created, not manually.
http://service.sap.com/notes --> search for RFC trusted connections for Ecc 6.0
http://service.sap.com/upgrade.
Regards,
Srini Nookala
Similar Messages
-
Issues during technical upgrade from version 4.6C to ECC 6.0
Dear All,
We have done a technical upgrade from version 4.6C to ECC 6.0 and encountered following issues -
In the t-code ABZE (acquisition with in house production) there is a check-box for reversal posting on screen with version 4.6C. However, this field is missing in ECC 6.0. Why so?
In the report s_alr_87012327, there is a field "only with creation block" in version 4.6C. However, this field is missing in ECC 6.0. Why so?
Request to kindly suggest the alternative to carry out the same in ECC 6.0.
Thanks in advance.
Regards,
DhawalHi Akshya,
Please find answers below.
1) 4.6c is NON-UNICODE system, Can I upgrade it into ECC 6.0 UNICODE system?
Yes you can.
If you are on a single code page system then you can give a gap between your uprade and unicode conversion. There is no problem with the singlecode upgrade and conversion.
But if your system is MDMP then you will have to do the CUUC method that is both upgrade and unicode conversion together. Though you can give a gap and sign an disclaimer with SAP it is still not recomended way.
2) 4.6c does not have any ITS system installed. If we upgrade it to ECC6.0 ABAP only, then Can I activate WAS internal ITS?
Yes you can activate it.
3) 4.6c does not have any JAVA stack. When I upgrade it to ECC 6.0, can I upgrade it to dual stack (ABAP+JAVA)? If yes, then how?
After the upgrade and unicode conversion you can install the java stack.
Regards,
Ravi. -
Technical upgrade from 4.7 to ECC 6.0
Experts,
1.We need to make Technical upgrade in HR from 4.7 to ECC 6.0 with OM,PA, -ve Time,Payroll, Recruitment (other Modules also upgraded).Kindly let us know what will haeepen for the following .
A.Configrations in SPRO
B.Previous database (Cluster table for previous Time and payroll run)
C.Master data of employees which is stored in Infotypes
2.Also Kindly let us know is there anything we need to take care after moving from 4.7 to 6.0Hi Kumar,
Basically there needs to be a Transport established between 4.7 and ECC6.00 Version . You can create Transport request for those tables whose value remain same in 4.7 nad ECC6.00 But for tables having changes you need to create the Configuration.
1 more method applied by organization is a client copy of tables.
My suggestion would be like this :
1. Compare and Update Tables (from Configuration Handbook)
Pay Frequency
Define Period Modifiers
V_T549R
Define Date Modifiers
V_T549L
Check Payroll Accounting Area
V_T549A
Pay Scale Structure
Define EE Subgroup Grouping for PCR and Collective Agreement Provision (CAP)
V_503_B
Check Pay Scale Type
V_T510A
Check Pay Scale Area
V_T510G
Check Assignment of Payscale Structure to Enterprise Structure
V_001P_C
Define Default for Pay Scale Data
Feature - TARIF
Setup payroll period for Collective Agreement Provision
V_T510W
Revise Pay Scale Groups and Levels
V_T510
Enterprise Structure for Wage Type Model
T539A
Feature - LGMST
Revise Default Wage Types
V_T539A - already tested
Define Valuation of Base Wage Types
V_T539J
Legacy Data Transfer
T558B
T558D
Define Periods for import
T558B - already tested
Rates of Pay
T512W
Pay Scale Allowance Group
V_T7INA1
Assign Pay Scale Groupings for Allowances
V_T7INA3
Define Basic Codes
V_T7INB4
Statutory
Define Trust Details for Provident Fund
V_T7INF1
Assign Company Rates for Provident Fund
V_T7INF5
Define PF Trust Validity Period
V_T7INF7
Maintain Contribution Details for Provident Fund
Feature: 40EPF
V_T7INF3
Define Contribution Type for Statutory rates for Provident Fund
V_T7INF3 - already tested
Employees' State Insurance
V_511P_B
V_T511P
Maintain Number of Working Days in a Month
V_511K_B
V_T511K
Define Personnel Area and Subarea Groupings for ESI
V_T7INE1
Assign ESI Groupings for Personnel Area and Subarea
V_7IN0P_ESI
Maintain Contribution Rates for ESI
V_T7INE3
Assign Universal Contribution Groupings for Universal Contribution Type
V_T7INOP_ALL
Assign slab code for Universal Contribution Grouping
V_T7INU1
Assign Slab code and other parameters for each state of a universal type
V_T7INU3
Assign contribution Value for each slab
V_T7INU5
Maintain Eligibility Details for Superannuation
Feature - 40SAN
Tax and Professional Tax
Define Professional Tax Grouping Details
V_T7INP1
Maintain Method and Form Layout for Ptax Groupings
T596F
Maintain Re-Computation Behaviour of Tax related
Feature - 40MWT
Maintain Schema for Exemption on Medical Reimbursement / Insurance
V_T7INT9
Maintain Schema for Exemption of Child education and hostel allowance
V_T511K - already tested
V_T7INT9 - already tested
Bonus Act
T511K - already tested
T511P - already tested
One Time Bonus Tax
Copy Wage Types
V_T7INT9 - already tested
V_T7INA9
Define Compensation Area Feature
Feature - CAREA
Assign organizational assignment to Compensation Groups
Feature - CMGRP
Maintain Variant for Payroll Simulation
Feature - 16CVA
Maintain Payslip Variant
Feature - 16EVA
HRA/CLA/LTA
Define Accomodation Types
V_T7INT7
Company Loans
Maintain Loans Grouping
Feature - 40LGR
Mantain Loans Eligibility Checks and Limits
Feature - 40 LGR - already tested
Banking
Setup House Banks
V_T012
Bank Account
V_T012K
Define Sending Banks
Feature - DTAKT
Check Text Keys for Payment Transactions
V_T520S
General Ledger
Define Employee Grouping Account Determination
Feature - PPMOD
Define Symbolic Accounts
V_T52EK
V_T52EZ
2. Compare and Update Genaral Tables
1 T512W
2 T511K
3 T511P
4 TCURR
5 T030
2a. Compare and Update Additioanl PY-IN Tables
1 T7INTN TAN Number Maintainence
2 T7INA1 Pay scale grouping for allowances
3 T7INA3 Associating pay parameters to pay scale grouping
4 T7INA5 Wage type model for pay scale grouping for allowances
5 T7INA7 Reimbursements Allowances and Perks - base slabs
6 T7INA9 Reimbursement allowances perks - eligibility and calculation
7 T7INAA Salary year for pay scale grouping for allowances
8 T7INB1 Basic Wages
9 T7INB4 Basic Codes
10 T7INB5 Basic Codes for Allowance Groups
11 T7INB7 Basic slabs
12 T7INB8 Appraisal Criteria
13 T7INB9 Increment criteria
14 T7INC1 Car types master
15 T7INC3 Type and age eligibility for car schemes(COCS/OYCS)
16 T7INC5 Perk valuation for cars
17 T7INC7 Amount and number eligibility for car schemes(COCS/OYCS)
18 T7INC9 Conveyance allowance eligibilty
19 T7INCA Codes for Conveyance types
20 T7IND1 Dearness allowance consumer price index master
21 T7IND3 Dearness allowance consumer price index value
22 T7IND5 Dearness allowance basic slab details
23 T7IND7 Dearness allowance calculation rules
24 T7IND9 Dearness allowance consumer price index slabs
25 T7INE1 Personnel area / subarea grouping for employees' state ins.
26 T7INE3 Employees' state insurance contribution rates
27 T7INF1 Trust Master
28 T7INF3 Statutory rates for Provident fund
29 T7INF5 Company rates for Provident Fund
30 T7INF7 Trust details
31 T7ING1 Gratuity Details Maintenance
32 T7ING3 Gratuity ID Maintenance
33 T7ING5 Gratuity ID and Related Wage Types
34 T7INI0 Investment category limits
35 T7INI2 Investment technical description and text
36 T7INI4 Investment details
37 T7INI5 Sub section description
38 T7INI7 Sub section limit
39 T7INI8 Sub division description
40 T7INI9 Sub division details
41 T7INIA Deduction wage type for Sec 88
42 T7INIC Deduction wage type for Sec 80
43 T7INJ1 Section 24 Deduction Details Maintenance
44 T7INJ3 HR-IN: Loans Eligibility checks and limits
45 T7INJ5 HR-IN: Loans Dusbursement Schedule
46 T7INJ6 HR-IN : Loan Tranche Disbursement: Text for Events Code
47 T7INL1 Leave validation for LTA
48 T7INO1 One day salary deduction
49 T7INP1 Professional tax grouping details
50 T7INP3 Method and form layout for states
51 T7INP4 Professional tax slab amounts
52 T7INR1 Housing code for taxation
53 T7INR3 Percentage/amount for housing related constant
54 T7INR5 Housing related statutory constants for taxation
55 T7INR7 Codes for Housing Types
56 T7INR9 City category for housing type
57 T7INS1 Superannuation Details Maintenance
58 T7INS3 Superannuation ID
59 T7INS5 Superannuation-Wagetype Details
60 T7INT1 Slab codes for taxation
61 T7INT3 Taxation slabs
62 T7INT5 Personnel subarea grouping for Tax
63 T7INT7 Tax codes for tax exemptions
64 T7INT9 Taxability of wage types
65 T7INU1 State for Universal Grouping
66 T7INU3 Slab Codes for States
67 T7INU5 Contribution Value for Each Slab
68 T7INW1 Personnel area/subarea grouping for LWF
69 T7INW3 Labour welfare fund rates
70 T7INY1 Recovery of rounding off amounts
71 T7INZ1 Factor for retiral benefits
72 T7INZ3 Period of notice codes
3. Compare Payroll Schemas
1 Compare ECC5- to ECC6 standard schemas
2 Compare ECC5- to ECC6 customised schemas
4. Compare Personnel Calculation Rules (PCR)
1 Compare ECC5- to ECC6 standard PCR's
2 Compare ECC5- to ECC6 customised PCR's
B. Payroll Process
1 Generic Payroll Process
1.1 Simulate Payroll
1.2 Release Payroll
1.3 Start Payroll
1.4 Check result
1.5 Corrections
1.6 Remuneration statement
1.7 Simulate and test FI/CO postings
1.8 Simulate and Test Preliminary DME
1.9 Run Preliminary DME Program
2 Create a live posting run and create FI documents
C. Regression Testing (Variance Monitor)
1 Compare Payroll Results
Create a Excel with these contents and fill them up by saying the percentage of similarity and completetion.
Please let me know if this is usefull
Regards,
Prabha -
Technical Upgrade from 4.6c to Ecc 6.0
Hello All.
We have upgraded the system from 4.6c to ECC 6.0.
We have got SPAU list and Unicode(UCCCHECK) program list.We have shortage of time to resolve both the list.
I have few questions.
1) Do we need to resolve UCCCHECK list first or SPAU list.
2) How we can modify programs,tables in SPAU list.
Could you please give Some step by step need to perform in SPAU list.
3)How we can convert UCCCHEK list
Could you please give STEP by STEP procedure and transaction code.
Thanks in Advance
MuthuHi Muthu,
Please [check this link|http://help.sap.com/saphelp_nw04/helpdata/EN/83/7a18ecde6e11d195460000e82de14a/content.htm].Do the same with SPDD too.
SPAU has to be done before going for the UCCHECK of custom objects.
Thanks,
Sai -
LONGPOST.LOG Errors during Upgrade from 4.6C to ECC 6.0
Dear all,
We have received the below errors during our upgrade from 4.6C to ECC 6.0.
Basically we have received three types of errors:
1.
4PETG065 RSUPGDEC: Table/structure "BAPE_VBAK" (component "SD-SLS" ) enhanced illegally: Error "2"
2.
A2PESEEF_BADI 103 BAdI implementation "/IRM/BADI_SDDOCFLOW" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZZ_MG_MASS_NEWSEG" must still be migrated A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
A2PESEEF_BADI 103 BAdI implementation "ZOTC218E_1" must still be migrated
3.
3PETG447 Table and runtime object "/SSF/DHEAD" exist without DDIC reference ("Transp. table")
3PETG447 Table and runtime object "/SSF/DTAB" exist without DDIC reference ("Transp. table")
3PETG447 Table and runtime object "/SSF/PTAB" exist without DDIC reference ("Transp. table")
Can anyone help us how to solve this issues.
Thanks & Regards
SenthilHi,
Senthil following are ans to ur questions
1. After the SPAU remediation is completed, should I manually release the transport or should I start the upgrade and the upgrade will release that transport?
Ans : Once your SPAU remediation is completed you should release the requests and then start the upgrade of the DEV system.
2. How do we import this SPDD & SPAU transport in the QA and PRD, I mean at what stage of the upgrade we need to specify/ include this transport?
Ans : Now when you start the QA or PRD upgrade at that time you come across a phase during PREPARE called ADJUSTPRP.
Refer following note for further information --
SAPNote 124522 - Importing a modification adjustment in 2nd upgrade
3. Suppose the QA & PRD has more objects to adjust than our Dev box, and this transport will not take care of the delta objects, so in that case how should we remediate, we need to create an other transport request in QA and then it will become two transports?
Ans : First of all this should not be the scenario where you have more modified objects than that in DEV. As all the modfications should take place in DEV first and then should be transported to QA and then PRD. But in such case what you can do is complete the upgrade of QA system and then you are still having 14 days to complete the SPAU objects. So you can make another request which can be transported as a post upgrade activity once the upgrade is completed in production. For SPDD you will have to take care of the SPDD objects if there are different than those in DEV during the ACT_700 phase only or else you might risk data.
This is the reason why SAP always asks you to follow a proper transport path.
4. If our dev box has more objects for remediation than our QA & PRD, then will these objects be also imported into the QA & PRD box?
Ans : Yes, thats why you should be very sure about the SPAU objects that you have found in DEV. You need to compare the objects with QA and PRD and then only make the modifications.
I hope i have answered all your queries.
Regards,
Suhas -
Upgrade from 4.6c to ecc 6.0
Hi,
We are doing a technical upgrade from 4.6c to ecc 6.0 without activating New GL. As a functional consultant, what should i look for? I know that we need to test the business processes and check Z programs but anything specific, plzz let me know.
What changes should be made in Asset Accounting?
Regards
SatyaThanks for the reply.
What are the changes made in Asset accounting after upgrading?
I heard of RBE tool...how is it used for FI?? (u check for the mostly used transactions or what??)
Anyone, plzz answer..waiting for ur replies
Regards
Satya -
Find button issue in tool bar during upgrade from 4.6c to ECC 6
Hi All,
I came across one issue during the upgarde.
In new system ECC 6:
When i run the transaction IW51 then give the notification type SE(service notificaton) and then hit enter key.
It leads to next screen there enter the value in the FUNCTIONAL lOCATION field some ex 9000004 and
opposite to that field there is a structure list icon.
Clicking that icon it leads to a structure list.
My issue is: the FIND button and FIND NEXT button are disabled in the menu bar.I need the both buttons to be active
When i seen in old system i.e 4.6c
FIND button and FIND NEXT button are active.
I made little change in the new system in include MIHIXF82 as shown below.
SET PF-STATUS 'MAIN' ."EXCLUDING gt_excl_tab.
I commented the EXCLUDING gt_excl_tab.
Now FIND button and FIND NEXT button is active but when i click the FIND button there is no pop up is displayed.
Usually pop up is displayed when we click FIND button in that we can enter the value which we have to find out.
Regards
Jai
Edited by: Jayanth16 on Jan 28, 2010 8:07 AMHi,
In that program gui status MAIN is used.
When i see that gui status and in FUNCTION KEYS the FIND button and FIND NEXT button
the function codes are in orange color.Remaing BACK,EXIT,and CANCEL button function code are in white color.
Whether the orange color indicates is in inactive mode?
If so how can i activate those Function codes?
Regards
Jai -
Error during Upgrade from 4.6c to ECC 6.0
Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar KHi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar -
Technical upgrade from 4.6C MDMP system to ECC 6.0 using CU & UC approach
Hi SAP Experts,
We are embarking on a project for Technical upgrade from SAP R/3 4.6C MDMP system to ECC 6.0 using the CU & UC approach for our Asian operations (comprising of India, Japan, Taiwan & Singapore).
Please share with me the Best Practices you followed in your projects, checklists, DOs, DONTs, typical problems you encountered and the possible safeguards, any other useful information, etc.
Since very little information is available from Organizations who have used the CU & UC upgrade approach successfully, I am raising this in SDN to share your experiences during the Technical upgrade.
All useful information will be surely awarded with suitable points.
Looking for your invaluable inputs which will be a BIG help for our project.
Best regards,
RajaramHello Rajaram!:
It's a very big project, that you have to do in a lot of steps........
If you want sent me a email with the problems and you want.
Regards,
Alfredo. -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Technical Upgrade from XI 3.0 to PI 7.1
Hi,
My client is going for Technical Upgrade from XI 3.0 to PI 7.1 not fresh installation. They are asking for How best we can achieve this. I have gone through Decision making document and upgrade document from SAP. Apart from which please provide me the valuable Inputs like what measures we need to take care before and after upgrade as an XI developer. In our project about 90% of interfaces are having java mapping. will there be any changes to be done after upgrade.
I already gone through below link
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655&overridelayout=true
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655
Thanks in advance
Venkateshyou can use this document as your base - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce?quicklink=index&overridelayout=true
do an upgrade from XI 3.0 to PI 7.1
java mappings will still continue to work.
But you might have to modify some graphical mapping, java proxies and modules if any -
Technical upgrade from 4.6c to 6.0ecc with unicode conversion
Hi Experts,
Can you explain me technical upgrade from 4.6c to 6.0ecc with Unicode conversion.
if u got any notes pls send it to [email protected]
vijayCheck these links. Search SDN with Term "Upgradation" you will get lot of links
http://help.sap.com/saphelp_nw04/helpdata/en/16/4b3c88170e11d6999d00508b6b8b11/frameset.htm
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0f9f37c-be11-2a10-3baf-d5d7de5fb78d
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/system%2blandscape%2bconversion
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/project%2bplanning%2b-%2bmdmp%2bsystem
http://www.sdn.sap.com/irj/sdn/wiki?path=/display/unicode/communication%2binterfaces
Message was edited by: Jason Lax (Removed link to deleted content) -
Table Enhancement Category during upgrade from 4.7 to ECC 6.0
When our sandbox was upgraded from 4.7 to ECC 6.0, Basis had the ABAP developers change the Enhancement Category on about 400 tables, some of which were custom tables. The enhancement category was previously u2018not classifiedu2019 on these tables.
Is this really necessary? Has anyone not changed the enhancement categories on tables that were flagged during the upgrade? Also, what happens if we select the wrong enhancement category?Jane,
This is what SAP says,
Short Text
Enhancement Category Selection
Definition
Structures and tables that were defined by SAP in the ABAP Dictionary can be enhanced subsequently by customers using Customizing includes or append structures. The enhancements do not only refer to structures/ tables themselves, but also to dependent structures that adopt the enhancement as an include or referenced structure. Append structures that only take effect at the end of the original structure can also cause shifts - in the case of dependent structures - even within these structures.
You must select an enhancement category for the following reason: In programs where there is no active Unicode check, enhancements to tables and structures can cause syntax and runtime errors during type checks and particularly in combination with deep structures.
In programs where there is an active Unicode check, statements, operand checks, and accesses with an offset and length are problematic - for example, if numeric or deep components are inserted into a purely character-type structure and the structure thus loses its character- type nature.
Depending on the structure definition, the radio buttons allowed in the dialog box are ready for input. Choose one of the possible enhancement categories:
Cannot be enhanced
The structure must not be enhanced.
Can be enhanced or character type
All structure components and their enhancements must be character-type (C, N, D, or T). The original structure and all enhancements through Customizing includes or through append structures are subject to this limitation.
Can be enhanced or character-type or numeric
The structure and its enhancement must not contain any deep data types (tables, references, strings).
Can be enhanced in any way
The structure and its enhancement may contain components whose data type can be of any type.
Not classified
This category can be chosen, for example, for a transition status; however, it must not be chosen for creating structures.
The rules for defining the enhancement category result implicitly from the structure setup and the classification of the types used. These rules are as follows:
If the object contains at least one numeric type or a substructure or component (field has a structure/table/view as its type) that can be enhanced numerically, the object can no longer be enhanced character-type, but is itself, at most, enhanceable character-type or numeric.
If the object contains a deep component (string, reference, or table type), or it contains a substructure or component that is marked as enhanceable in any way, then the object itself is enhanceable in any way.
If the object does not contain any substructure or component that is marked as enhanceable, you can select cannot be enhanced. If the structure has not yet been enhanced, you can choose the category cannot be enhanced in any case.
If you are creating new tables and structures in the ABAP Dictionary, the system proposes the category can be enhanced in any way as standard value for the classification of the enhancement options. If the developer chooses a more restrictive classification than can be enhanced in any way for a particular structure, then only the classification levels that adhere to the rules above are allowed. It is not possible to choose an enhancement option of a structure that is more restrictive than the classification resulting immplicitly from the structure setup and from the classification of the types used. Therefore, only the allowed categories are proposed for selection in the maintenance user interface.
If a structure depends on one or several other structures, the smallest category is chosen as implicit classification (in the order cannot be enhanced < can be enhanced and character-type < can be enhanced and character-type or numeric < can be enhanced in any way). This classification is greater than or less than the category in the other structures and also greater than or the same as the category that results from the actual setup in the original structure itself. -
BW specific task during R/3 upgradation from 4.7 to ECC 6.0
Hi Everybody,
We are planning R/3 upgrade from 4.7 to ECC 6.0. We are using BW 3.5 . So, Can anybody share BW 3.5 specific task during pre-upgrade as well as post-upgrade for ECC Upgrade.
Thanks & Regards,
Sushant N. TiwarekarHello ALex,
There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
Which system is unicode, the satellite?
There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
Hope this helps,
Dolores -
Role of Time Mgmt functional consultant during SAP Upgrade from 4.7 to ECC6
Hi,
Could anyone explain the role of a time management functional consultant during SAP upgrade from R/3 4.7 to ECC6.0. Please provide me if you got any documentation.
Thanks,
Sunny"After you upgrade to SAP ERP 6.0, you can enhance the functionality of your application without performing a further
upgrade thanks to a new deployment technology u2013 the SAP enhancement package for SAP ERP. The enhancement
packages simplify the way you manage and deploy new software functions for SAP ERP." - that is the real benefit of ECC 6.0
There aren't any major changes to PTM functionalities from 4.7 to 6.0. I hope your system is already using IT 2006 instead of IT 0005. Under functional role, you are required to configure/test any functional upgrade and manage data.
Regards
Yash
Maybe you are looking for
-
Problem with referenced libraries (after flash 5.5 trial install/uninstall)
I've been using flash builder 4 & flash cs5 with on problems. I unstalled flash 5.5 trial version to have a play around, then uninstalled it. I also changed the flex sdk version flash builder was using so I could export and test stageVideo. Now when
-
Undo redo cut copy paste delete are GRAYED out in mozilla
windowsXP
-
I cannot set my gmail to push, only fetch or manual. How can I resolve this?
On my iphone 4s, I went to settings-->fetch new data-->advanced. Icloud has push, fetch or manual, but gmail only has fetch or manual. Am i doing something very stupid? I would like to receive notification of my emails immediately. Thanks.
-
I am using the Rdbms Realm to control the access to my servlets. Does anyone know how can I lock a user when he reach the maximum numbers of retries ? Thanks in advance Alejandro
-
Dear Quality Experts, If I want to implement QM, what are the fields I've to maintain with respect ot Finsihed Product, Semifinished, Raw materials etc... Can anybody throw some lite ont his issue. Scenario for INprocess Goods: Material in process->