Issues even after updating to build 14.3.A.0.757

List of problems that I am still facing with my Z1 Compact..
1. Walkman widget does not work in lockscreen 8 out of 10 times at least, if not more.
2. Notification sounds still cracks, though the ringer issue appears to be solved.
3. The back key never functions while "IN A CALL". Also, if I try to type something while "IN A CALL" the keyboard never appears no matter how many times I tap on the typing panel.
If this is the standard of your development, then, unfortunately, competing with the likes of IPHONE 5S shall always be a dream.
And as a consumer, spending 35K over a phone shall compel a user to atleast expect the basic functionalities to work properly.
But may be. SONY INDIA does not care about it's customers!!  At least both the KITKAT 4.4.2 builds make me feel this.
I have always been a SONY ERICSSON/SONY user since 2004 but this phone is causing me **bleep** lot of troubles.
Guys, my post is sincerely directed towards SONY developers/testers/othersonyexecutives.
I am definitely looking forward to a reply from SONY regarding these above mentioned issues which still persist even after the second update.
P.S. Please do not ask me to repair using PCC or SUS. They didn't work. I cannot do them again and again!!

I have a black Xperia Z1 Compact with a build date of 14W04 (week 4 of 2014) which I have just updated for the first time since purchasing SIM-free from Phones4U, using Sony PC Companion on my Windows 7 PC, to Android 4.4.2 and Sony Software 14.3.A.0.757 and fortunately (and very untypically) I do not seem to have experienced any of the reported problems at all. I have just taken several flash photos in the pitch dark indoors using Superior Auto mode and I cannot identify any flash bleed or uneven flash illumination as reported in other topics and threads. I am really very surprised, because from my past experience with technology in general, if there is a possible potential technical problem around, I always seem to be one of the unlucky people who it affects! However, I do agree that the overall photo quality does not seem to be nearly as good as would be expected from the apparently impressive documented camera specification and is really quite dissapointing! I wondered if a third-party Android camera app would improve photographic performance, or if the obvious shortcomings are too deeply associated with the camera lens and/or the Sony firmware?

Similar Messages

  • BSOD in iPad mini even after updating to iOS 8.0.2

    my iPad reboots with blue screen often. I thought the recent update will will fix this one but even after updating to iOS 8.0.2 still issue exists? Is anybody else facing the same issue

    Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple. 

  • When I changed my ATT email password, I can no longer open my email in my Iphone, even after updating my password. What do i need to to do?

    When I changed my ATT email password, I can no longer retreive my email on my Iphone, even after updating my password in my Iphone. What's wrong? How do i fix it?

    make sure the outgoing (smtp server) has the updated password also. settings>mail,contact,calendars>then at account>it will say outgoing, smtp or advanced. after clicking on the smtp it will have an option to change that password, delete it and add ur new one

  • My iPad frequently locks up, even after updating to iOS 7.1.  When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

    My iPad frequently locks up, even after updating to iOS 7.1.  When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!

    DEVICE NOT RECOGNISED IN ITUNES
    If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

  • Hold Camera Button to Unlock Bug even after updati...

    Even after updating, the hold camera button to unlock feature doesn't reliably work on the Nokia Lumia 900.  What gives, why is this still broken?

    This seems to be a problem with all Lumia 900s at this time...
    I visited an AT&T and Microsoft Store and inquired about this problem.  Every Nokia Lumia 900 on display and even the store employees own phones exibited the "works when it feels like it" camera button problem. The store employees had no explanation for it.
    Through my own fiddling with it I found the only way to get the camera button to work every time is to press the power button first to wake up the phone, then press the camera button. It is a pretty easy work-around.
    I also found that if you press the camera button slow enough to feel both clicks, or press the camera button twice quickly that can work too, but not all the time...
    As far as I know Nokia has not acklowledged this problem yet but I hope they will soon and that a software update will correct it.
    -Paul

  • Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times.  I have no Thunderbolt cables connected.

    Thunderbolt Firmware Update 1.2 keeps reappearing in the App Store Update even after updating many many times.  I have no Thunderbolt cables connected.  I am running OS X 10.9.5.

    Hide Update in Mavericks
    Try re-indexing Spotlight.
    Spotlight – Re-index

  • I cant open PDF file in my mac even after updating to 10.4

    I cant open PDF file in my mac even after updating to 10.4

    Chrome
    this is the pdf i am trying to open
    http://www.cic.gc.ca/english/pdf/kits/forms/IMM5257E.PDF

  • HT3228 How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out?  I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

    How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out?  I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

    Sometimes it is fruitless to try to "fix" a broken account on an iOS device. I would delete the account on both devices and then configure the account again from scratch.

  • VZW Messaging app continues to crash even after update, and several re-installs. Anyone else still having this problem, and know any fixes?

    My messaging app crashes 5+ times each day, or causes my phone to lag until I restart it. Is anyone else still having these problems, even after the update?

    the vz messaging app is garbage.Thats probably why no tech support people have replied to your question yet. I had similar issues & decided to disable it. May i suggest you download 'textra' or even hangouts?

  • After update Folio Builder Panel 1.1.3. articles keep on loading

    Hi all,
    After updating the Folio Builder Panel as requested (by the panel it self), we are unable to acces any articles. A loading icon keeps on animating and the article-folders stay grey. Does anyone know how to fix this problem?
    Looking forward hearing from you.
    Regards,
    Remco van den Hout

    The good news, your'e not alone. The bad news... Adobe doesn't really have a fix at this point.
    It's a problem where the DPS thinks you are trying to update those articles, and they don't ever get reset to a state of "updated". The only fix I was able to do, unfortunately, was to trash the folios and reupload the whole thing again. It's unclear at this time where the problem was introduced so it might take a while for a fix.
    It was a major pain to have to do this stuff over again – but I know that the issue has been documented and they are looking into it.
    I recommend you make a sidecar.xml file with all the folio descriptive copy. This way, if you have to do this process another time, you can import the sidecar file and it will populate all of your articles again a lot faster. You might have to still adjust the order in a few cases... but it works pretty well. Info on that here:
    http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60606c7754128c7a9c00e-7f ff.html
    Steve

  • My adobe flash reader doesn't work even after updates

    Even after repeatedly having updated the adobe reader, it still refuses to operate (it shows as being blocked and needing updating).

    Try un-installing and then re-installing.
    Adobe Flash Uninstaller
    Adobe Flash Player
    Adobe Flash Player updates available for OS X on October 24, 2014

  • Social App not working even after update from noki...

    nokia n8 social loading feeds.
    My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
    Its now the 4th jan and the phones still will not work even after and update from a socail app,
    nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds) 

    Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
    blitZkid
    Nokia C7: Running on Nokia Belle
    "If I'm helpful in anyway, a click of appreciation on the star would be nice"

  • Skype mic issues even after crating dummy ALSA

    hello everyone  i'm having a "growling" issue with my head  set even after setting up a dummy alsa as mention in this wike page: Monster/low-octave "growling" distortion over mic after trying the stuff on that wiki I had a look here in the forums and found this post   Skype + microphone = growling[SOLVED] but I'm still getting the feedback on the other side of the call also if I use the dummy alsa skype crashes  below is the output of amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Mono:
    Front Left: Playback 56 [89%] [-7.50dB] [on]
    Front Right: Playback 56 [89%] [-7.50dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 28 [90%] [7.50dB] [on]
    Front Right: Playback 28 [90%] [7.50dB] [on]
    Simple mixer control 'Mic',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [on]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 2 [67%] [20.00dB]
    Front Right: 2 [67%] [20.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 15
    Mono: Playback 10 [67%] [-15.00dB] [on]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 15
    Front Left: Capture 11 [73%] [16.50dB] [on]
    Front Right: Capture 11 [73%] [16.50dB] [on]
    Simple mixer control 'Mix',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Digital',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 116 [97%] [28.00dB]
    Front Right: Capture 116 [97%] [28.00dB]
    Simple mixer control 'Docking-Station',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Internal Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [30.00dB]
    Front Right: 3 [100%] [30.00dB]
    i know is not the headset because I test it on my suse box and it work fain
    hope someone can help me  thank you in advances :-)
    Last edited by gozes (2012-01-22 02:45:02)

    hello everyone  i'm having a "growling" issue with my head  set even after setting up a dummy alsa as mention in this wike page: Monster/low-octave "growling" distortion over mic after trying the stuff on that wiki I had a look here in the forums and found this post   Skype + microphone = growling[SOLVED] but I'm still getting the feedback on the other side of the call also if I use the dummy alsa skype crashes  below is the output of amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Mono:
    Front Left: Playback 56 [89%] [-7.50dB] [on]
    Front Right: Playback 56 [89%] [-7.50dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume pswitch penum
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 28 [90%] [7.50dB] [on]
    Front Right: Playback 28 [90%] [7.50dB] [on]
    Simple mixer control 'Mic',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [on]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 2 [67%] [20.00dB]
    Front Right: 2 [67%] [20.00dB]
    Simple mixer control 'Beep',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
    Playback channels: Mono
    Limits: Playback 0 - 15
    Mono: Playback 10 [67%] [-15.00dB] [on]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 15
    Front Left: Capture 11 [73%] [16.50dB] [on]
    Front Right: Capture 11 [73%] [16.50dB] [on]
    Simple mixer control 'Mix',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Digital',0
    Capabilities: cvolume penum
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 116 [97%] [28.00dB]
    Front Right: Capture 116 [97%] [28.00dB]
    Simple mixer control 'Docking-Station',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive penum
    Capture exclusive group: 0
    Capture channels: Mono
    Mono: Capture [off]
    Simple mixer control 'Internal Mic Boost',0
    Capabilities: volume penum
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [30.00dB]
    Front Right: 3 [100%] [30.00dB]
    i know is not the headset because I test it on my suse box and it work fain
    hope someone can help me  thank you in advances :-)
    Last edited by gozes (2012-01-22 02:45:02)

  • Firefox reverts to older version on own. Now cannot re-install lost plugs even after updated rev.

    Over time (months usually) firefox seems to revert to an earlier version that I was using, customization would be lost. This last instance, I lost plug ins and cannot get them to re-install though the process works as it always used to. I even tried re-installation after updating to the latest rev of firefox. I like Adblock and Noscript, but they will not re-install.

    Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    If you have increased the minimum font size then try the default setting "none" as a high value can cause.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • IBooks 3 fails to launch even after update

    On my ipad 2, iBooks version 3 still fails to launch after update. This is the first time I can recall Apple failing to fix a material bug. I hope it is working on the problem.

    iBooks is working fine on my iPad 2.
    Lets try first quitting the iBooks app then resetting the iPad.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
    Then reboot your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Maybe you are looking for

  • Burning to disk from iPod

    Is it possible to record voice via microphone to an iPod, convert to ACC file, then use iTunes to download off the iPod and burn to an audio CD? BTW, I don't own an iPod yet - the answer to this question will dictate whether I will or not!

  • SQL batch file in XP

    Hi, I am writing following s.bat file in XP for some admin task sqlplus "a/a@toto as sysdba" <<! shutdown immediate; startup; but when I am executing s.bat only my first line is getting displayed nothing else. What is I am missing out ? ( I know this

  • Moving iphone sync from one computer to another

    Hi everyone, I am about to switch from one laptop to another & would like to start syncing my iphone 4 on the new laptop. How do I do the transfer? I tried once and the iphone will sync any apps from the laptop to the iphone (none at the moment so it

  • SNC tab on SU01 - make it invisible or uneditable

    Dear all, We are looking for a alternative to make this tab/field SNC  unchangable or invisible in SU01 ? Could you please suggest ? Thanks in advance and best regards,

  • Error while creating webshop

    Hi All,     I have done the necessary jco settings in the shop admin and i have created a application scenario like 'webshop510'. When i am trying to create webshops with shopadmin/shopadmin url i am getting an error that scenariowebshop501 is not ex