Issues exporting MOV from Flash

I have a movie that uses a couple audio files. When I run this as a swf, everything plays fine...Except at the end. I have a frame that says thankyou.play()
That is tied to a mediaDisplay component
When I put a trade for thankyou.onSoundComplete....Nothing happens.
So with the Flash still working fine for the most part, I export the movie as a Quicktime movie. It plays the intro audio but never moves forward from there. The background noise is gone.
Any ideas?
Flash cs 4 published as flash 8 as2

When a movie exporting as a mov, actionscript will ignored.

Similar Messages

Not able to export quicktime movie from Flash CS5 or CS6.

Hi! I am not able to export quicktime movie from Flash CS5 or CS6. When I export it the progress bar is showing and says Recording Flash content and nothing happens

I havent exported any videos in the past from Flash. The movie is around 45 seconds and the size is 470KB.
I tried both, the memory and the hard drive.
In the attached image you can see the settings and in the other image you can see the progress bar that remains without something to happen.
I dont mind what type of video to export it can be also .avi but again I have troubles there. It is very large and the animation is distorted.
The animation consist from two scenes. The first one can be exported without any problem but the second one cannot be exported. May be because it has some masks layers and guide layers?

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Export image from Flash to .ai or .eps and keep transparent colors.

Is there a way to, when I have finished this wonderful
drawing in Flash with transparent colors, to keep them when I
export them from Flash to Illustrator as an .ai or .eps?
I'd like my images to be scalable and rezizable (to be able
to be really BIG) when I deliver them.
Please help! I use Flash MX and Illustrator CS.
Lisa

> Is there a way to, when I have finished this wonderful
drawing in Flash with
> transparent colors, to keep them when I export them from
Flash to Illustrator
> as an .ai or .eps?
What happens when you import them into Illustrator?
Christian Scholz-Flöter

I have exported movies from old digital camera - how do I ensure it goes into the correct year (eg. 2005) Thank You

Some exported movies from old digital have gone into the incorrect year. How can I move them around into the correct year or at the very least move them in the current year but in chronological order eg under 2011 I have listed them as 2004 - blah blah, 2005 blah blah but they are "all over the place". Thank You

There are two ways to do this.
The simplest is to right-click on the clip in the Event and modify the date.
See iMovie Help here http://help.apple.com/imovie/#mov3ac6c398
If you have a long clip that you would like to split into smaller clips, there is another way. You can drag the long clip into a free tool called MPEG Streamclip from Squared 5. In MPEG Streamclip, put your playhead on the in point of your first smaller clip and type I. Then set the playhead on the out point of your first smaller clip, and press O to set the out point. Then FILE/EXPORT TO QUICKTIME. If your clip is DV, As you save the clip, rename it in the form clip-yyyy-mm-dd hh;mm;ss.ext, where the word "clip" must be lower case. YYYY is year. hh is hours in 24 hour time. Then repeat this process until you have all your smaller clips made. Finally, you can import all these clips into an iMovie Event using FILE/IMPORT MOVIES.

Export quicktime movie from Flash CS6 hangs

I am trying to export a very short flash animation as a quicktime video from Flash CS6 but when the "Recording Flash Content" progress bar gets to the end nothing happens. I am able to click cancel and the x but nothing has been created for me.
If I wait long enough I get the error message "The export operation failed because it ran out of memmory" How can I fix this?

Hi Tomlijagogo,
Can you try the solutions in this post? Flash CS6, QuickTime: The export operation failed because it ran out of memory.
Thanks,
Preran

Need advice on exporting to .MOV from Flash

I'm creating an introductory video for readers of my webcomic. Because I know Flash, I'm creating it there. Basically it's a voiceover with some static comic images getting panned and zoomed around, with some sound effects and such.
They key thing is that I want this to be easily shared. The best way for that (I think - open to other opinions) is to get the final file uploaded to YouTube and saved as a YouTube video, which I then embed on my site. YT vids are extremely easy to share and email around. This gives me the best option for getting the most eyeballs on it.
The problem I have had in the past is that exporting a Flash file to .mov makes a MASSIVE file, size-wise. This video will be like 3 minutes long, I'm a little worried that the file size might be too big to upload to YT. Also, in general the exported .mov looks like garbage compared to the SWF.
I know you can modify the Quicktime compression settings and such when exporting, but I am not sure what the optimal settings are.
What are your thoughts? Looking for any good advice...

Hi Pixelmech,
one option I use a lot is to export not to Quicktime but to PNG sequence. Then import that into After Effects (assuming you have AE) and add a filter (optional) and then export to MOV format. YouTube allows uploads of files up to 2GB (I am pretty sure). In fact YT has a spec sheet on what compression to use too:
http://www.youtube.com/t/howto_makevideo
Hope this helps.

Cannot Export Video from Flash

Hi,
I just copied this dvd movie using Magic DVD Ripper. I then
open up Flash and import it to the library selecting "progressive
Download from a Web server" (I DON'T want to lose the audio) and
edit it by shortening it to just one scene. When I select "Test
Movie" from the Control menu it plays just fine. But, here's the
problem. When I try to export it (whether it's in fla, swf, or mov
format), all I get is a blank screen and I don't see the video at
all. What am I doing wrong?
Please help!
Thanks.

The problem is that iPhoto is looking in the wrong place for the file:
/ Volumes/Sagate/Iphoto_Library_2014.photolibrary/Previews/2014....... "
It should be looking in the Originals folder.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Trouble "exporting movie" from iMovie when uploading to You Tube....

Hi, I have never had a problem with uploading my projects from iMovie to You Tube off my iPad. I have about 32GB's available on my iPad 3. I only have about 5 projects and never had any hassle going thru the upload process? Now, with my latest project complete (only about 4.5min) I click on upload to You Tube, it then says "exporting movie" as it normally says, but doesn't go any further - just hangs there?
Any help appreciated!

well... for anyone else experiencing something similar, here's how I worked around it :
1. Once I have edited my video in the iMovie app and I want to publish it, I then select the publish option, and then choose YouTube as the place I'd like to publish it.
2. I then fill out all the fields in the 'Publish to YouTube' form, as if I was about to publish it.
3. I then select CANCEL, to cancel out of the 'Publish to YouTube' form.
4. I then exit the iMovie app, and force it to close by going into the app dock and forcing it to close there.
5. I then re-open the iMovie app, and choose the video I want to publish, select the publish option, choose YouTube as the place I'd like to publish it.
6. The fields are now already populated with the information I had entered previously, although I still need to select the video quality and also whether it should be public or private.
7. I now click "publish" and it publishes correctly, with all the correct meta-data / title / description etc. attached.
This has worked for me consistently over the past couple months now,
Hope this helps anyone with a similar issue.
Cheers,
Nick

Trying to export movie from QuickTime Pro to AVI and getting white screen

Hi there,
I am trying to export a movie from QuickTime Pro to an an AVI file. It goes through the process as if everything has worked, but when I open the finished file, all I get is a white screen with no audio or picture.
I need to save lectures from school from the school website to my computer so that I can watch them when I do not have internet access. QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie..
I need some way to get the files to my computer. Any suggestions?

I am trying to export a movie from QuickTime Pro to an an AVI file
AVI is just a container ... specifically, which codec are you using when exporting? And why export to AVI?
QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie
That usually means that your system doesn't have the codec installed needed to view the video, but your web browser is using a plugin that does. What format are the web videos? Flash?
-DH

Exported Movie from FCP 7 to Quicktime. Audio is only bad on ONE COMPUTER with ONE HEADPHONES, why?

Exported the movie from FCP 7 into a Quicktime video, one problem.
Have three computers...the audio sounds great on all of them when using headphones #1 (http://www.amazon.com/iHome-LifeTalks-Basic-Headset-Black/dp/B001QXDMVE/ref=sr_1 _8?ie=UTF8&qid=1407521145&sr=8-8&keywords=ihome+headset). Audio also sounds great coming out of two stereo systems.
But with headphones #2, a cheap pair of "Skull candy" headphones, the audio sounds great on computers 1 and 2, but when I listen to my video on computer 3, there is heavy static and backround noise, like a radio station that is out of tune. Everything else I listen to on computer 3 with headphones 2 sounds totally normal.
How is such a thing possible?
What steps can I take to "fix the audio"? I already "normalized the audio" (All audio was: .WAV files, recorded with a zoom H2 recorder). Could this be a hardware issue of some kind? This computer is an AspireX1430 bought 2 years ago, with whatever sound card it came with. I'd hate to put my video online only to find out later that for certain viewers the audio won't plan on their system.
Thoughts? Thank you!

Thanks!
Yeah it is crazy to me that everything with this headphones and computer sounds normal, except for my one video! Other youtube videos even sound good!
Sent the video to our marketing department it will be mass emailed to 5000 customers shortly
I feel confident enough...the video sounds great on 4/5 computers at least and probably a lot more!!!!

Exporting Video from Flash?

Hi,
I just copied this dvd movie using Magic DVD Ripper. I then
open up Flash and import it to the library selecting "progressive
Download from a Web server" (I DON'T want to lose the audio) and
edit it by shortening it to just one scene. When I select "Test
Movie" from the Control menu it plays just fine. But, here's the
problem. When I try to export it (whether it's in fla, swf, or mov
format), all I get is a blank screen and I don't see the video at
all. What am I doing wrong?
Please help!
Thanks.

First of all, Flash is not a video editor - so you are
getting off on the wrong foot by trying to
edit video content - open the ripped video in a video editor
like premiere or final cut - get it
exactly the way you want it and then export it to FLV format
or a video format that is uncompressed.
Then encode it using the Flash Video Encoder which has a
built in wizard that asks you what you want
to do and how much compression - it is very straigh forward.
From there you can open a new Flash doc and drag the video
component to the stage - it is simple to
do and you should consult some of the many articles on flash
video here on Adobe's site:
http://www.adobe.com/devnet/flash/video.html
Hope this helps.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ceara519 wrote:
> I tried asking this same question on the Flash Media
sub-heading but no one had an answer for me. Does anyone have any
idea what I can do to fix this problem?
>
> Thanks.

Animated GIFs don't loop in exported movies from Keynote 3

I am just getting started with Keynote 3.0 and really like what I have seen. I created a series of slides and pasted animated GIFs in various places. They are set to loop on each slide as Keynote presents the slides. The slide show has preset transition and build timings and there is music playing continuously, throughout the show. It works quite well. (However, there is very intermittent choppy audio and video playback when there are builds or transitions occurring. Any thoughts on optimizing this?)
The problems begin when I ask Keynote to export the slideshow to a movie. The main problem that I am struggling with is that the animated GIFs don't loop in the rendered movie, regardless of which compressor I choose. I don't see anything in the documentation. I have also searched several of the discussions on making movies from Keynote 3 but have not specifically seen animated GIFs discussed. What am I missing here?
Also, I want to be able to play this movie on a DVD player at an upcoming function. Any recommendations for an approach that will be best? I have QT 7 Pro and the iLife '06 suite.
Thanks, in advance, for any forthcoming suggestions.
eMac G4 Mac OS X (10.4.6) 1.25 GHz, 1 GB RAM

My guess is, it's too much of a pain to have to calculate how many times it will actually loop and create the loops and then composite everything. Running it in Keynote just tells the thing to keep playing over and over till you do something that stops it. There's a BIG difference there as one is just being told to play, the other is having to be placed in a movie with an exact number of frames, so there are a bunch of calculations involved.

(How can we) Export FXG from Flash Professional using JSFL

How can we export a selection from Flash Professional as .FXG using JSFL? It appears that this is not possible... just yet! I have added this as a feature request within the Adobe Labs site for Flash Professional. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the idea.
Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects. Our ultimate goal is to bring these through Catalyst, maintaining their vectors, and use them to create Spark skins.
We've got a JSFL that can export each linked library asset, as well as any frame-labeled 'state' within these clips. However, currently we are using exportPNG, which is not ideal as it flattens our vector art into raster images. We are about to try the exportSWF option, and see what Flash Catalyst does with this. Our early attemps with importing swf's haven't been too amazing.
I'm starting to imagine some cross-product scripting in which we export symbols at a state-by-state level as .swf from Flash, then rebuild these onto layers in Illustrator, and THEN import these into Catalyst...yikes!
Anyone have a better solution?

Follow-up:
Out of pure wishful thinking I decided I would just see what happened if I pretended 'exportFXG' was already a part of JSFL. Based on the signature of 'exportPNG', i tried the following lines:
var success = fl.getDocumentDOM().exportFXG("file:///C:/mySymbol.fxg");
fl.trace("success:"+success); // output: success:true
It worked! Fantastic! I'm not sure if exportFXG is considered still in "beta" and therefore intentionally excluded from the docs, or if it was just an oversight. But at least it gives us something to experiment with.

Exporting images from flash

I'm currently porting a game from flash to the DS and having
difficulties exporting the images and was hoping someone out there
might be able to help. The images in flash are all vector based and
I need to export them and place them on a background (colour
255,0,255). The reason for the background colour is it is removed
programmically within the game (blue screening if you will).
Problem is, if I export them as png's and then add the background
in photoshop, or do a screenshot in flash with the image over the
background then it leaves a halo around the character.
Anyone know how to get around this?
Take care,
S.

Can you upload an example of the png or a visual of the halo
you are seeing?

Issues exporting MOV from Flash

Similar Messages

Maybe you are looking for