Issues flashing bios - Please help

    I am attempting to upgrade the gpu in my gt70-onc. I have the .30u bios and have made a bootable usb flash drive but when I run flash.bat I get :ERROR - cant retrieve bios information. Any thoughts? Im going to attempt again with the MSI hq utility.

Nvm - figured it out. Mine shipped with the win 8 bios with a x at the end of the revision number. Did a uefi bios flash and its all good now and lets ma 880m work correctly...even though this thing runs hot.

Similar Messages

  • I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

    I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

    If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
    Clinton

  • Firefox constantly freezing due to issues with Flash. Please help.

    I was running the firefox 20 beta (and have been for a while) when in the last few days, suddenly any time I tried to open any site that used even the slightest amount of flash, the browser would freeze for minutes on end before finally releasing a "plugin error" type message about Shockwave Flash. If i clicked 'continue' it would stay frozen. If i clicked 'stop script' then sometimes it would fix it, but most of the time it would keep freezing and showing that same message over and over until I stopped the process in task manager.
    First I tried to update flash and shockwave- both are up to date. So i decided to delete the files themselves and the programs via add/remove and reinstalled them. Still did not fix the problem.
    Next I tried to do a reset firefox to default state. This didn't work. I tried doing it again with the flash files deleted/uninstalled AND I rebooted the computer and the problem still persisted.
    Finally, I tried to downgrade to a more stable version of firefox, so I downloaded 19 and it still didnt work. Tried the uninstall/re install for flash one more time and nothing.
    At this point, I cannot access about half of the pages I usually go to on the web and I need help here, please anything will do.
    One thing that I noticed that might be helpful is that no matter how many times i uninstalled or reinstalled flash, every time it would try to run, task manager would show two instances of it, each using different amount of memory.
    again, please please help. If there is any solution short of a total wipe it would be greatly appreciated

    hello, maybe it's an issue with the protected mode in the flash plugin - you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] makes a difference.

  • Text doesn't show, scroll bar does? using Flash CS3 Please help!

    A little background:  I made text box, typed some text, converted it to a movie clip, named etc.  Used a purchased and proven scroller component ... followed directions to the letter, including referencing/linking the files. However, when I tried to test the scroll bar .... the scroll bar appears, scrolls and works perfectly except the text does not appear.  I have tried making a scroll bar with the UIscrollbar same thing happens. I made an other attempt and put pics along with the text in the movie clip ... this time the pics appeared and scrolled, but the text still would not appear.  PLEASE HELP. I am on a deadline and can't get past this scroll bar issue. THANK YOU!

    Hi
    Thanks for the tip. I did embed the text, but still not showing. Currently, I have the text  box set to the following: Dynamic Text, Multiline, Border Around text, Anti-Alias for Animation (but I have tried all choices and embed the text each time).
    Here are the original instructions with the FTscrollbar which I followed exactly.
    1. Drag the component (FTscrollbar) from the components panel to the stage.
    2. Create a new movie clip to be scrolled:
         a. create a textfield on the scene and type in a few lines of text
         b. select the text fields and covert them to a move clip symbol having the registration point top left. (I did top right since my scroll bar is on the right).
         c. give the new movie clip an name in properties panel.
    3.Select the component of the stage and configure its parameters in the parameters panel or component inspector panel.
         a. Instruc the component to scroll the new created movie clip as the targetMovieClip
         b. Set the viewAreaHeight and viewAreaWidth
         c. set snapMode to snapToView value
         d. leave rest of parameters unchanged unless you want to adjust.
    4. Test Movie (contol/test movie)
    On the FTscrollbar, I have the targetMovieClip set to the movieclips name the only other parameters the instructions said to change were veiwAreaHeight=100 veiwAreaWidth=150 which were the defaults.  When I change this numbers the scroll bar goes away and the text still doesn't appear?  The scroll bar is 16 x 140, the text box to be scrolled is 130 x 143 and the entire flash page is 500 x 550. I am not sure what the viewAreaHeight and viewAreaWidth are for ... or if that could be the problem?  I have never had problems with scrollers but I used MX. I just recently purchased the CS3 and I am not sure what I am not selecting or not selecting but if feel it's probably something simple I am overlooking.  So any more ideas are MOST APPRECIATED. If you need more info from me to help solve, please feel free to ask. THANKS!

  • HP DVD RAM UJ8DB Driver Issue, not updating, please help

    Hi, I am trying to insert cd/ dvd but it does not detect any cd or dvd i found this issue today. It never showed this issue in the past. I checked on forums, opened device mangager and also tried to uninstall, restart and update or install driver for HP UJ8DB, but it doesn't fix it says windows has determined the driver software is up to date. Please help me fast i want to install antivirus software. I have windows 8.1 PC

    It is not a driver issue:
    http://support.microsoft.com/kb/314060
    The above Microsoft article will take you through the possible issues. Does the drive show up in device manager? The BIOS?
    Can you boot from it? It is likely either a corruption of the registry which the linked article shows how to fix, or the drive itself is bad and needs to be replaced. Post back to answer the questions so we can help.
    If this is "the Answer" please click "Accept as Solution" to help others find it.

  • Tried to update BIOS Please help!!

    Hello i have a MSI mainboard Z68A-GD65 (G3)
    I was going to update BIOS what i did was download the update then i copied the file to a usb stick ran the file from the usb then it started updating and then it restarted to a text saying
    Warning!!! BIOS ME update....file not found. Please add file to your USB.
    Now i cant get to the BIOS or Windows. I have tried different USB:s with no luck. I tried to clear CMOS.
    Please help me!

    Quote from: Froggy Gremlin on 12-October-12, 04:46:49
    *MSI recommend you to update BIOS with ME8 only if you are using Ivy Bridge 22nm CPU.
    Sorry to say but it seams illogical. AFAIK it is impossible to flash form SB to IB bios using Ivy Bridge. Am I wrong?
    Going further... I can not find any positive reports that users can get working system by  changing cpu to Ivy after all those bad flashes. I see many suggestions to try it but I can not see any "success!" info. IMHO MSI flash procedure is just "somehow" unreliable. It is nice that MSI decided to support IB on older motherboards but we see too many bricks on our forum.
    My idea (wild guess) to avoid bricking is to flash with only one stick of memory.
    PS: IMHO Click Bios II attracts too much too many P67 users (like me)

  • Big problem installing Adobe Flash Player, please help?

    Please help. I tried to download Adobe Flash Player 5 times without success. Every time it states Installation succeeded, but I can't find it anywhere.
    I have to keep closing and opening Browsers without any reaction of the so called installed Flash Player. What a mess!

    Flash is installed as a browser plugin. You won't see it as an app in OS X. If you go here it will tell you if flash is installed and working. http://www.adobe.com/software/flash/about/

  • Flash Crash Please Help

    I've been using Flash CS4 for some time on two computers (Laptop and Desktop).
    The installation on the laptop is OK, but recently the Flash program on the Desktop crashes (it worked well before).
    On my Desktop computer, If I load ANY previously good *.fla or even if I write a new one the following happens everytime....
    1. Open Flash
    2. Open *.fla progam
    3. Open windows->actions
    4. Dock the action panel as required
    5. Attempt to select any (code:frame) in the action panel - program crashes.
    The crash report (which I've sent off wihout any response) includes the following...
    <crash exception="EXCEPTION_ACCESS_VIOLATION" instruction="0x010f8a96">
    This happened in Vista and is the same after upgrading to Windows7
    I have Kaspersky Internet Security 2010 installed.
    I have 3Gb RAM and 1Tb hard disk and 2x2.5Ghz processors
    I have re-installed CS4 several times (ensuring that Kaspersky is disabled).
    I have tried running Flash with Kaspersky disabled completely.
    Please help!
    Regards
    Dave

    Do I get points for Answering my own question !! 
    It seems as though my system crashes are simply due to having the wrong Workplace Selected ???
    Having no responses to my question, I tried playing around with the Workspace setup.
    It was set to "Essentials" and as soon as I set it to "Classic" my system crashes stopped.
    Resetting to "Essentials" bring the problem back.
    Hope this little nugget of information helps someone else

  • Drag and Drop with a response in Flash..please help

    Hi
    I have just started with flash and actionscript3 about 5 weeks ago. I'm in my first year uni and I have a drag and drop assignment (for a kindergarten class). Its "little Red Hen" and they have place the correct picture in right holder.
    I have gotten the drag and drop working but I can't seem to figure out how to display a tick when they have place it in the correct holder.
    Please help....
    This is my script (it may seem messy...still new)
    import flash.events.MouseEvent;
    /*Mouse Event that ensures the function of hen movieclip to start dragging
      when mouse is pressed*/
    hen1_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragStart);
    hen2_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragStart);
    hen3_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragStart);
    hen4_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragStart);
    hen5_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragStart);
    hen6_mc.addEventListener(MouseEvent.MOUSE_DOWN, dragStart);
    function dragStart (event: MouseEvent):void
        event.target.startDrag();
    /*Mouse Event that ensures the function of hen movieclip to drop
    when the mouse button is realeased with Condition statement, if
    hen = holder, hen snaps into place*/
    hen1_mc.addEventListener(MouseEvent.MOUSE_UP, dragStop1);
    function dragStop1 (event:MouseEvent):void
        hen1_mc.stopDrag();
        if (hen1_mc.hitTestObject (holder1_mc)==true)
            hen1_mc.x=holder1_mc.x;
            hen1_mc.y=holder1_mc.y;
    hen2_mc.addEventListener(MouseEvent.MOUSE_UP, dragStop2);
    function dragStop2 (event:MouseEvent):void
        hen2_mc.stopDrag();
        if(hen2_mc.hitTestObject (holder2_mc)==true)
            hen2_mc.x=holder2_mc.x;
            hen2_mc.y=holder2_mc.y;
    hen3_mc.addEventListener(MouseEvent.MOUSE_UP, dragStop3);
    function dragStop3 (event:MouseEvent):void
        hen3_mc.stopDrag();
        if(hen3_mc.hitTestObject (holder3_mc)==true)
            hen3_mc.x=holder3_mc.x;
            hen3_mc.y=holder3_mc.y;
    hen4_mc.addEventListener(MouseEvent.MOUSE_UP, dragStop4);
    function dragStop4 (event:MouseEvent):void
        hen4_mc.stopDrag();
        if(hen4_mc,hitTestObject (holder4_mc)==true)
            hen4_mc.x=holder4_mc.x;
            hen4_mc.y=holder4_mc.y;
    hen5_mc.addEventListener(MouseEvent.MOUSE_UP, dragStop5);
    function dragStop5 (event:MouseEvent):void
        hen5_mc.stopDrag();
        if(hen5_mc.hitTestObject (holder5_mc)==true)
            hen5_mc.x=holder5_mc.x;
            hen5_mc.y=holder5_mc.y;
    hen6_mc.addEventListener(MouseEvent.MOUSE_UP, dragStop6);
    function dragStop6 (event:MouseEvent):void
        hen6_mc.stopDrag();
        if(hen6_mc.hitTestObject (holder6_mc)==true)
            hen6_mc.x=holder6_mc.x;
            hen6_mc.y=holder6_mc.y;

    Ok so I figured it out, thank you Ned.
    I have made the tick_mc alpha 0 in the beginning of the script and then in my conditional I have made the alpha = 100
    So it works...yay!
    Now all I have left, if the piece is placed in the wrong holder then it needs to go back into its orignal position.
    I have tried
    Written above the script
    var startX:Number;
    var startY:Number;
    then just below my dragStart code
    startX = event.target.x = startX;
    startY = event.target.y = startY;
    then after each if statement I placed an else statement
    else
          hen1_mc.x = startX;
          hen1_mc.y = startY;
    Its clearly not working, please could you tell me what I am doing wrong?
    thank you

  • User account issues in school please help urgent

    currently have 15 emacs on school network running 10.3.9 and the rest are windows machines the macs are standalone machines yet have the same logins for each. The issue is with setting up accounts for the students I dont want to use simple finder as the account type i want to use managed but the problem with that is students can select go connect to server and they can access all the servers on the network is there anyway of greying that out or getting rid of them being able to do that please help as this is urgent as students are in the process of doing coursework

    Hi Craig
    When you say you want to stop...
    them being able to look at the computers on the network
    is ambiguous.
    I am presuming you are not concerned about students accessing other computers on the network, as there are ways of preventing that, but you simply do not want them to be aware of any machines on the network.
    Using Simple Finder which presents a limited Finder menu without the Connect to Server showing will achieve this, but you say you don't want to do this.
    Elements of the Finder menu cannot be turned on and off with Terminal. Terminal can modify network settings but it cannot as far as I know disable a menu item in the Finder. If that was effected, it would be called a hack.
    I don't see a how to be networked and be blind to the network at the same time. Perhaps others may have a creative solution for you.
    regards roam

  • Image Gallery issues with Lightbox2 - please help!

    Hello there,
    I am using Lightbox2 image gallery.  The loading.gif and close.gif aren't showing up and I think there's an issue with the path in the lightbox.js file.  The loading and close gifs are located in the Images gallery so I changed the path in the lightbox.js file accordingly - I've gone through this many many times but they are still not showing up.
    Can anyone please help me?
    My website is: www.labellepetraie.com
    Here's where I downloaded the script from: http://www.huddletogether.com/projects/lightbox2/#how
    I have tried all the path combinations mentioned in their forum but to no avail.  What am I doing wrong?
    Thank you for any help you can offer to me.
    Regards!

    Interesting.  I've just looked at your scripts, and it would appear that you have blended two versions of lightbox2 on your page,.  Is that possible?  The lightbox.js file has no function called initLightbox() in it, whereas older versions do.  So, try changing this:
    window.onload = function(){ // use this instead of <body onload …>
         MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
            initLightbox();
    to this:
    window.onload = function(){ // use this instead of <body onload …>
         MM_preloadImages('../3websites/home4.jpg','../3web sites/amenities1.jpg','../3websites/inquiry1.jpg','../3websites/rates1.jpg','../ 3websites/photos1.jpg');
            //initLightbox();
    to see if that works.  I think so.  Turns out the initLightbox() function call that we activated by fixing the code before is no longer needed by the lightbox2 script as of v2.04!  I see that it still tells you to put that function call in the body tag, but i think that is wrong (which is very weird to say, can I really be right???).  If you look at the example page online you'll see that he uses this body tag:
    <body>
    and there are no onload's anywhere. 
    Let me know.
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Wireless Connection Issue Macbook Pro PLEASE HELP!

    Hi 
    I got a brand new macbook pro 13' the other week, i installed everything etc and also my bt home hub 2 showed up in airport and it all worked fine no problem no matter where i was in the house.
    Yesterday i tried to get on the Internet on the bottom floor and my router is on the 3rd floor and it won't connect to my Internet, it asked for the access key and then i get timed out message and then a message abut its the wrong key, out of range etc. I then go to the room with the router in or on the same floor and it connects and works fine, but soon as i move downstairs it does'nt work as it did before.
    Ive reset the router, changed router channels to all of them, changed it to G, N etc and still no joy, also tried WEP and still no joy
    Is this an issue with my mac or my router, my mac and router are n power why is suddenly not reaching the bottom floor when it did no problem before.
    Please help 
    Sam

    Macbook Pro and BT Homehub4.  Looked for help here but did not find it, however, solved the problem by chance as below.
    Problem - having recently installed Homehub4 Macbook was persistently refused access to the hub on the grounds that a password was required and the one keyed in was incorrect.  An older iMac upstairs was fine - this was the one set up by the engineer when installing.  Signal strength was at full.
    Solution - found by chance that the Macbook worked ok from another room and concluded that the signal strength was just too high in the original position.  By placing a biscuit tin in front of the hub the signal is sufficiently attenuated to work in the original room, and is still good enough to use the upstairs machine too.
    So signal is too strong! I call that counterintuitive and I bet no help desk would think of it.
    Regards, John.

  • Not getting past step 2 out of 3 with flash installer. please help!

    Im trying to run MP3 rocket pro.
    I have already made it run once since downloading it. Once i closed mp3 rocket and tryed reopening it. I got the box saying i needed to install flash player 10 or higher. I go to adobe and download it. I open up my download folder and hit run and the box disaperes but nothing happens. i then try to click on the download box again but it says only one program can run at a time. Im stuck at this point. i have gotten nowhere with internet Explorer so i uninstalled it and tryed to download chrome but now thats not running correctly . I have tryed installing and uninstalling adobe and mp3 rocket and got nowhere. its just chewing up my internet.
    this is a 2nd hand laptop so should i just do a rebot and be done with it or ?
    please help,
    kylie

    Nobody can tell you anything without proper system info or other technical details. That aside, there's a whole Flash Player forum where people deal with this all the time and you may simply get better answers overall
    Mylenium

  • Audio driver issues... please help!

    Alright,
    I just purchased a new Asus computer, it's really nice... however I have Realtek HD, which doesn't seem to have a stereo option, it only comes out of the right speaker. When I try to record, it's the same issue.
    Do I need to purchase a new audio driver?
    Unless anyone knows how I can change the buffer size with the default "Audition 3.0 Windows Sound" to a lower number, since I'm trying to record in multitrack mode with the metronome.
    I have ASIO4ALL v2 as well, but it's the same issue because of no stereo mic option...
    Someone please help... several week headache.

    Hmm,
    Even when I have the mono mix it's recording exactly in the center... how can I get it to pan the channel or have it record in both?
    Also, is there any way I can lower the buffer rate for the default "Audition 3 Windows Sound" so I can use a metronome without it delaying it?
    Thanks.

  • When i tried to upgrade, it deleted flash! please help!

    I tried to download Adobe Flash because a website said I did
    not have the latest version. The download said it was successful
    but now I have no Flash at all! I can't see certain websites or
    even watch Youtube videos. I tried uninstalling Adobe and then
    reinstalling it, but that didn't work. I don't know what to do!
    Please help! Thanks.
    P.S. I have a Mac OS X version 10.4.10, 1.6 GHz PowerPC
    G5

    I had that happen with a MacBook. It turned out that the metal case above the slot was slightly bent down.
    Putting a flat blade screwdriver in the slot and gently twisting it to move the metal case up allowed it to eject. Don't put it in too far you only want to bend the case not the drive.
    The case can get bent down by picking it up with your thumb pressing down on the case above the slot.

Maybe you are looking for