Issues: IE9 and FP WIN 10,2,153,1

I did some research on the net and forums here, but no solution. Slowly but surely I become mad about this:
My configuration is:
Flash Player version: WIN 10,2,153,1
Debug Player: No
User Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.0; Trident/5.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 1.1.4322; .NET CLR 3.0.30729; .NET4.0C)
Browser Version: 5.0 (compatible; MSIE 9.0; Windows NT 6.0; Trident/5.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 1.1.4322; .NET CLR 3.0.30729; .NET4.0C)
Browser Name: Microsoft Internet Explorer
Or simply: I run Vista Business SP2 (32-Bit) and IE 9.0.8112.16421, Updatever: RTM); i. e. the newly launched one, downloadable from the MS page.
The Shockwave Flash object (Add-on) is activated.
I am the machines admin.
Problem is:
FP loads normally (verified on the "FP about"-page of Adobe). However, some FP-Objects on some webpages do not load properly or don't load at all. I can view Youtube vids, for example, but cannot view FP-objects (e. g. graphs and statistics) on some pages. Especially HTTPS-connections seem to be a problem.
However, Firefox 4.0 works fine - all FP-objects are displayed and work OK.
Tried so far without any success:
(Problems persist in IE9)
- De-/Reactivation of Hardware-Acceleration in FP
- De-/Reactivation of Shockwave Plugin
- Several un- and re-installs of FP (as written throughout the Adobe pages)
- Removal of the "kill-bit" registry entry, un-/re-install of FP
Any ideas anyone? I even tried to de-install IE9 and roll-back to IE8 (which didn't have these problems with FP) but for some reason, I ended up with my Windows not starting anymore. So I did a system recovery... and ended up with a IE9 again....
I don't know who's to blame, but for me it's a complete nuisance as I cannot switch to Firefox.

Thanks for your reply!
I use Kaspersky 6.0.4. IE9 and version 10.2.153.1 was installed. BUT: I have deleted the registry entry for the kill-bit although the kill-bit wasn't set (value 0...). I thought deleting the whole reg-entry might have an effect somehow, although the kill-bit wasn't set - it didn't.
Right now, I'm through almost all adivce given here on the forums and all over the Adobe page. I even tried the least obvious things (e. g. kill-bit) but nothing worked.
I should add one point in my problem description above (maybe this helps):
The FP-objects not visible are actually loaded, i. e. I can right-click on the objects and see the FP-menu - but in the menu it says "Film not loaded" and IE keeps trying to download something (the rotating circle indicating download-activity keeps on circling for the webpage on which the FP-object is).
And another thing: I have noticed that this problem happens on a lot of webpages, browser-based GUIs, etc. dealing with graphs, statistics and "some really serious stuff" needed for device controls, statistics programs, etc. - I don't know, if it's an Adobe problem, but they better rush to provide a fix for this problem... It's one thing not to be able to watch a funny video but it's another thing not to be able to see a server's GUI....

Similar Messages

  • Browser Compatibility Issue with IE9 and IE 10

    Hi Everybody,
    I have a page which contains pageviewer Webpart, which redirects to the other page the problem is in IE 8 this works good but comes to IE9 and IE 10 the page is not displaying on the page but link is working good. Can any one please give me suggestions on
    this?
    Thanks and Regards,
    kadaruSastry

    Hi kadarusastry,
    This issue is about the browser compatibility.
    Please add your SharePoint site into compatibility view in IE 9 or IE 10.
    Or, use IE 8 mode in browser mode for IE 9 or IE 10.
    About how to add site into compatibility view, you can refer to the link:
    http://support.microsoft.com/kb/2536204
    Note: the settings for IE 9 and IE 10 are same.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Media Wep Part Issue on IE9 and IE10

    Hello All,
    I am playing a video file using media webpart on sp2013. File is working perfectly on IE 11 but same is not working with IE9 and IE10.
    do i need to install silver-light client at client machine. or something else i need to check ???
    Thanks in ADV!!

    Hi Dan,
    Yes, as Media Web Part is a Silverlight control, you need to install Silverlight at client machine.
    For more information, you can have a look at the thread:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/f8c3962d-b4fc-40f2-ac55-a0200cf6d4bb/sharepoint-media-web-part-not-playing-the-audio-portion-of-the-video?forum=sharepointgeneralprevious
    http://blogs.msdn.com/b/sanjaynarang/archive/2010/05/26/media-web-part-in-sharepoint-2010-faq.aspx
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • 64 bit IE9 and Flash noworkie solution.

    Adobe now has a 64&32 bit code download, as your machine admin. using Adobe code uninstall what you have and load the newest code.
    Here is how I fixed my issues. Some or all these two changes solved my issues with the most current Adobe Flash version 11.1.102.55 problem not working with Win 7, 64 bit using IE9 version 9.0.3, through an Intel HD graphics card.
    Try just this change first, if not successful add the next change ( I made both changes at the same time)  
    Try them one at a time, in the order of mention below.  That first change instructions had me download and use Firefox. During a Flash play I right clicked/ settings/ first tab had Hardware Acceleration checked, I unchecked Hardware Acceleration, tabbed over and also set memory to 10Mb. In both IE9 or Chrome you can see these settng but you cannot uncheck these Adobe Download Default.
    If not successful add this change.
    • Open Menu bar Tools/Internet Options (or located in theControl Panel).
    • Click on the Advanced tab.
    • Click on the Reset button click Reset. (no need to delete your settings you lose a lot of stored histrory)
    • Close IE and reLaunch IE9 and Adobe Flash Player might be properly enabled.
    Thanks Adobe, and MS you wasted a whole weekend producing this problem for me!  Worked before, one or both your updates caused this problem.  Worst computer QC I have seen since the new Dell Computers.

    To assist us in quickly understanding your problem, please follow these guidelines when posting:
    Specify your operating system (including 32bit or 64bit edition) 
    Specify your web browser and version (including 32bit or 64bit edition) 
    Specify your Flash Player version 
    Give us a brief explanation of the problem, please include any information you feel is important 
    Please do not use existing topics to append questions that are entirely different from the original topic. When in doubt create a new topic.
    What is your video adapter and driver version?

  • How to remove win 8 and install win 7 in bootcamp

    I want to completely remove win 8 and install win 7 in bootcamp. I followed the steps in bootcamp assistant and it appears to remove the win 8 partition. However when starting a new win 7 bootcamp partition and installation setup still thinks win 8 is being used. how do I get it to recognize the win 7 now being installed from the usb drive? This is on an iMac 27 late 2012 with OS x 10.10.1

    Hi Janesdf,
    Welcome to Lenovo Community!
    As per the query we understood that you are looking for Windows downgrade on your Ideapad N580.
    Before doing any changes in the system HDD partition or with Windows OS, I suggest you to create the system recovery media and then you can downgrade the OS. But you require Windows 7 recovery media.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Printing web page with select tags in IE9 and a .cfm file-only the original selected option prints

    My web page has a select tag and cfselect tags and when I print the page with a different option other than the originally selected option the print for both types of select tags reverts back to the original selection and ignores the new selection.  This happens in IE9 and .cfm files but not when the page is printed in IE8 or IE7 modes (tried in the F12 Developer Tools.)  It also needs to be a .cfm file.  FireFox printed the pages correctly for any combination.
    This was done on a Dell and ThinkCentre computers under Windows 7.  Also, I was able to reproduce the same problem on an different university web site where a selection box would revert back to the original selection for printing on a .cfm page and would print properly on a .PHP page at the same site.
    For my site, I used a print button which calls print() and right clicked and chose print and got the same results no matter which method was used.  I only had the right click method on the third party web site.
    I know this is probably a bit narrow an issue but, any help would be appreciated.

    It appears that it is probably an IE9 bug.
    I simplified the problem by turning the page source taken from the brouser of the original .cfm into an html file and found that it would still print improperly.
    When I eliminated the various parts of the file I found that it would print correctly only when I removed the first line, the "DOC type" line.
    The page will print the newly selected option but then I lose the style sheet.
    If it does not work in an HTML file it must be IE.  It is not the .cfm.  The reason that it did not work for .cfm files, is that they always have a "DOC type" statement.
    I have put the issue into an MSDN forum in addition to the one mentioned previously.

  • Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few m

    Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago

    I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
    Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
    Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010

  • Issues with 64 bit win 7 clients printing from 2008 R2 print server

    Hello All,
      I have a Windows 2008 R2 SP1 64 bit server built with a print server role. My issue is  64 bit win 7 clients cannot add a new printer. The clients see the printer in the list, starts the printer installation, get to the point of downloading the
    driver & then fails ' Windows cannot connect to the printer. ' the error is 0x0000012 or 0x000003ee. Any way I try to add the new printer I get the same result. The only way I can get the printer added is to do a local printer with the full path \\servername\printer_name
    and then "have disk" and point to the driver folder on the print server to get the printer added.
    Anyone have any thoughts on why the 64 bit clients will not add a new printer from a 64 bit print server ?
    Thanks,
    Steve

    Hi Steve,
    Please check if you can ping the print server successfully from this Windows 7 client computer. Did you encounter
    the same issue when add other printers? Or just for this one printer?
    Please type
    regedit on Run to open Registry Editor and follow the path:
    HKEY_CURRENT_USER\Printers\Connections and check if there has existent printer connection on the registry key.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Javascript Not Loading on IE9 and above

    Hi,
    We are working on SharePoint Online 2013 (Office 365) and created Javascript(.JS) files using SharePoint JSOM. The javascript files get loaded on IE8, however when we are testing on IE9 and above browsers, the JS files are not getting loaded, and our functionality
    is not working.
    Please suggest what could be the possible issue with browser compatibility OR Is there any issue in our javascript file ?
    Vipul Jain

    HI Vipul,As you said the Java Script loaded in IE8.so,It would nt be the issue with Script.Please try access by firefox,Chrome and Use 32 BIt IE9,Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other
    browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance and let me know the results.
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • IE9 and IE10 cannot download/open any files

    We are seeing this issue pretty consistently across the board with IE9 and IE10, and everything we have researched has not worked.  We notice that if we are logged in as administrator on a computer  (both PC's running Windows 7 and zero-client
    terminals), we do not experience the issue.   When we log back in as the user, we cannot open, save, or save as any downloads.
    We have deleted all appropriate registry entries, removed and reinstalled IE9 and IE10 on different computers, removed any group policy that may apply to our internet settings for testing, and removed our av program for testing only.
    Across the net we see multiple questions on this issue, but no clear-cut answer.  Has anyone come up with a standard answer for this?  Very frustrating...we didn't experience this on the same systems, same operating system, when we were on
    IE8.  

    Microsoft and their experts have done a terrible job assisting valued users with resolving this debilitating issue.  Their support is atrocious!
    After battling this issue for many days and really frustrating myself and my client, I stumbled across the answer. Create a new user account.  Yes, that is it.  A new (administrative) user account works perfectly.  Once you create the new
    user, copy the Desktop, pictures, videos and music files... I wouldn't try an easy transfer or anything like that due to the likelihood of copying the error with it.
    http://www.trianglecompudocs.com/Hints--Tips---Tricks.html

  • Open order qty,Delivered qty,issued qty, and closing stock---Tables

    Gurus,
    I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
    Please help me with table names where i can find .
    Regards
    venu gopal

    Hi,
    Try EKPO & EKBE tables..
    Thx
    Raju

  • RH11 404 - Page Not Found when linking to PDF file from search results using IE9 and IE10

    I'm using RH11 (11.0.3.268) and I've included a number of PDF files as baggage files. The hyperlinks on the pages work fine and display the PDF files in a separate window, as expected. However, when searching for these same PDF files using the Search tab, I'm getting a 404 error with the filename. The description on the error shows the filename and says the "the requested resource is not available." This is occurring using IE9 and IE10. And, it only happens within the application, which packages the WebHelp with a war file.
    I searched the forum and found where someone was having the same problem on Firefox, but was fine on IE. But, as mentioned, I'm finding it on IE.
    Thoughts on how to fix this error?

    Is the WAR file extracted at the point when the search is done? If not, I would expect it to fail.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Av check disabled in issue order and enabled in delivery

    Hi guys,
    we are looking for a solution to deactivate the order av. check in the issue order and activate the av. check in the delivery at creation:
    -requirement class : 0041 -> av. check  enabled
    -vov6 schedule line disabled
    - delivery item category av check enabled.
    with checking group 02 from material master (av. check active)
    -> the av check happens at order level
    with checking group Z. (no check)  the av,. check happens only at time of goods issue
    Does any one have any idea if this is not working for consignment process?
    Thanks a lot in advance
    Dominique

    1) Check the reservations for the material in MD04. The available quantity might have been confirmed for earlier sale orders and hence reserved for those sale orders.
    There are 11,000 cases in unrestricted stock. No reservations for the material.
    2) Check the inhouse production time in MRP2 view of the material master. It should be filled with production lead time.
    Done
    3) In OVZ9, the checkbox "check w/o RLT" is unchecked.
    This is our current setup
    Net, issue is still there.

  • Goods issue date and goods receipt date

    Hi Guys,
                 i was asked to display STO list.They asked me add goods issue date and goods Report date in the o/p columns.So any body can tell me what are the fields for goods issue and goods Receipt date's.?can u guys tell me the Tr code for these fields .?
    Thanks,
    Gopi.

    Hi there,
    I already solve it by myself.
    Actually is i call the initialization twice:
    Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
    Thats what make this problem happened.
    Sorry.
    Best Regards,
    danny

  • Regarding Goods issue date and order date.

    Hi All,
    Could you please tell me from where we can fetch Goods issue date and Order date.
    Waiting for your reply.

    Preeti,
    Goods issue date/order date of what ?
    Goods can be issued in a number of ways, in reference to many types of documents.  In each case, the GI date and order date are found in different places.
    Please elaborate your request.
    Best Regards,
    DB49

Maybe you are looking for