Issues importing file with "copy into document option".

I am running Framemaker 7.1. I need to import a .jpg image into my document. I selected File-Import-File and then selected the file and the "copy into document" option. This placed the .jpg image into my document. I saved the document and then closed it. Then I moved the .jpg image file which I imported into the document to another location. I then re-opened the document and I get the following message:
"Missing File - Looking for ../xx.jpg". I select the "Skip This File" option and then "Continue". When I scroll down through the document to where I had previously imported the .jpg image and when I get to that page, I get the following message popup, "Cannot display some imported graphics. The images will appear as gray boxes." Once I select "OK" on the popup message, the image is displayed as normal.
Could someone help explain to me how I can actually copy the image into the document without any reference to the original file pathname.
Thanks.

I was able to activate the hypertext. When I click on the hypertext for the imported picture reference, the original document opens up but I don't see anything to indicate the imported reference. The bottom line is that I want to delete the imported references since I don't want the references in the document.
Somewhere buried in the framemaker document are these two imported references and I want to remove them. How do I do this?
Keep in mind that when I click on the hypertext imported reference, it switches to the original document, but I don't see anything that indicates an imported reference so there is nothing for me to delete.
Thank you.

Similar Messages

I lost a really important file (an iText Express document) randomly and then one day, a "recovered file" folder popped up and I assume it has to do with that, but the file just contains a doc with a bunch of coding. What do I do with that? HELP!!!

As the title question states, I lost a really important file with iText Express. I've been using iText Express for a year or two now because it's just the one application I downloaded for writing and saving documents. I was working on one for a few months and randomly one day last month, when I went to open it to resume editing my work, the file was gone! I searched my whole laptop and trash. Then one day, a "Recovered Files" folder popped up in the area my file used to be, so I assumed that was the file I lost being recovered and I felt relieved. But when I opened the folder, the document inside was a "SoftwareMap" document with a bunch of coding written in it. I don't understand what I'm supposed to do with that or how it's going to help me recover my file?!? I lost SO much work!!! If anyone has ANY idea what to do, how this happened, or if the coding is supposed to help me recover my file, PLEASE help!!!

No, I already tried looking at that. The file that recovered was not in the trash, it appeared in my documents folder. I opened it up and inside was an iText Express document with coding. Then inside of there, was and then and this "SoftwareMap" document contained a bunch of coding and symbols and words.

How to import files with static variables into a block with methods?

i have a problem. is it possible to import files with static variables into tags like
<%!
//here i want to import a file named settings.inc
//whitch is used to set jdbc constants like url,driver,...
private void method() {
private void method2() {
%>
<%@include file="xy"%>//dosn�t work above
//only in <%%>tag

This should be done using either the Properties class or ResourceBundle. Ex.
<%
ResourceBundle resBun = ResourceBundle.getBundle(String resource);
String username = resBun.getString("username");
String password = resBun.getString("password");
// etc
%>

Lightroom 4.1 will not import files with a backslash in the name

Lightroom 4.1 will not import files with a name containing a backslash "\" I am using a Mac running OSX 10.6.8 (Snow Leopard). Under Preferences I have checked and "Treat the following characters as illegal" is set to "/:"

Your preferences and configurations will not be deleted. Of course, I'd advice you to back it up anyway and then completely remove LR.
You find all the files here: http://kb2.adobe.com/cps/929/cpsid_92954.html

Trying to import files with transparent backgrounds into Premier Elements 10

I am struggling to import files from Photoshop CS3 into Premier Elements 10 and preserve their transparent background. I have tried .png (8 and 24 bit), .gif and .psd files. I have tried rasterizing the type layer before "Saving for web and devices" but can't get anything to work. The imported files end up as either text on a white background (.gif) or the file imports as a black background with no type visible (.png and .psd). I have read a few forums but can't find any suggestions beyond what I have already tried. I also get the same problem if I "Save for web and devices" out of Illustrator.
Any suggestions much appreciated.
Mick

kaare
You have brought up one very interesting maintaining transparency question which I feel goes more to the trigger on the
Premiere Elements Videomerge pop up than to the Photoshop CS2 Save As with or without a check mark for Maximum Compatibility
And, I find that Photoshop CS5.1 as well as CS2 involvement in this matter is the same.
I created three 720 x 480 pixels documents, each with a blue colored circle on a transparent background in
Photoshop CS2 and saved each
psd with check mark next to Maximize Compatibility
psd with no check mark next to Maximize Compatibility
png
Each of them was imported into a NTSC DV Standard Premiere Elements 11 Windows 7 64 bit project.
Each triggered the Premiere Elements 11 Videomerge pop up.
If I checked No for the program request to apply Videomerge, then all 3 results were the same, that is,
the area around the circle was transparent and the circle was not...just the way it was created in Photoshop CS2.
So, why was the Videomerge message telling me "Clip being dropped contains solid background color" when
it had transparency represented by black and did not have a solid background color?
Even more interesting was what happened if I selected Yes to the program's request to
apply Videomerge to create transparency for what it claimed to be seeing as "solid background color".
The result was the same for all three cases, that is, the inside content of the circle became transparent
and the "black background" became a "solid color".
Videomerge is not one of my preferred Premiere Elements options.
To avoid the Videomerge pop up, I would suggest placing a check mark next to the "Do not show again.",
followed by No in the Videomerge pop up. When you do, you should not be confused by the activities of the
Videomerge pop up activities and you should have no problems with the maintenance of the Photoshop
created transparency in the Premiere Elements project.
ATR

How do I import a pdf file with layers into Motion 5?

In earlier version of Motion, you could import a pdf file with all layers or even select layers you wanted to import. You did this by dragging the pdf file into the project and holding it until a popup appeard providing you choices for how you wanted to complete the import. In Motion 5.0.1 however, no such popup appears and it imports the file as a flat image file. Any ideas how to change this pelase?
Thanks
Greg

Thanks Ben & Praveen. In FCP7 It was possible to import PDF files and as you did the import, make choices regarding layers you wished to import. FCPX appears to import PDFs but only as flattened files. I'll try keeping the file in PSD format and importing as you recommend.

Importing P2 .mxf files with audio into AE CS4

I hope this isn't the ultimate newbie question but, I have been working with After Effects for a few months but haven't need audio until now. Is there a different process for importing/exporting with audio? I have brought in the P2 video file but I don't think there is audio attached to it. When I export to a QT file, there is definitely no sound? Am I doing something wrong?
Thanks in advance for any help.
Kevin

"FAQ: Why is there no sound (audio) in my output file?"
"FAQ: How can I play or preview sound (audio)?"
To make sure that you're importing the P2 audio essence files, follow the instructions here: "Import assets in Panasonic P2 format"

Importing files with same name but different extensions

Hope I will be clear enough.
Lets say that instead of sending a file from Lightroom to an external editor, I open it directly in Photoshop.
When I'm done, I save the edited photo using the same name but in a different file format : IMG_1333.cr2 > IMG_1333.psd or IMG_1333.tif, and selecting the same folder location.
Then, I come back into Lightroom and synchronise the folder.
Why is the knew version of the picture not showing up beside the original file, despite the different extension ?
I notice that the different extensions ( .psd or .tif ) are recorded in the sidecar files field in the Metadata panel.
Of course, everything works fine if the file name is modified ( or just by selecting the "copy" option in Photoshop's "save as" dialog box ). Lightroom synchronise dialog shows the new photo to import.
So, why is Lightroom not making a difference between files with the same name but different format extensions ?
Thanks for any hint :-)
Gilles.

Gilles-
I think your problem is likely that you have the option to stack the copy with the original turned on. First, right-click on one of these photos and go to the stacking menu. If Unstack is not grayed out then you have a stack -- select Unstack to reveal all copies.
To change the automatic stacking of edited copies from Photoshop, when you next choose to edit a file, in the bottom left corner of the dialog is the check box for unstacking. Clear it, and that choice should "stick" until you change it again.
Hope this helps!
Tony

Issue importing Siebel data model into OPM

I am using OPM 10.2 and havaing a issue importing the Siebel data model in to OPM. I also have 10.2 Siebel connector installed on the desktop.
In OPM I cannot see the Siebel --> Import Data Model option in the menu.
Is there any configuration change that need to happen in OPM to do this?
Edited by: SP1D3R MAN on 17/11/2011 18:02

1. Make sure that you have the Siebel Connector 10.2.1 from Oracel Software delivery Cloud (formerly E-Devliery), there was a bug with the earlier 10.2 where the Policy Modeling Plugin was not working.
2. Make sure that the files Oracle.Modeling.Siebel.Exchange.dll, Oracle.Modeling.Siebel.Plugin.dll exist the the Plugins sub-directory of Policy Modeling (default location C:\Program Files\Oracle\Policy Modeling\plugins)
3. Make sure you are using Policy Modeling 10.2
if you need to manually copy the dll's they can be found in the siebel connector download at program files\Oracle\Policy Modeling\plugins\

Importing files with embedded IPTC metadata - Workaround?

I was hoping the the "metadata improvments" that Apple delivered with Aperture v.1.1 would include the ability to import legacy files with IPTC and XMP metadata embedded by Photoshop, iView, Photo Mechanic, and other similar programs.
Unless I am missing something that ability is still not a part of the Aperture program.
I really like Aperture and think Apple has got many things right in the new program. I would like to make it my primary tool for digital image management. That would require the ability to read into the Aperture Library the metadadta written by other programs.
Does anyone have a workaround for importing files that lets other programs IPTC tags be imported or connected with the files.
Thomas
G5 dual 2.7Ghz Mac OS X (10.4.6) http://www.thomaswhitephoto.com

Gilles-
I think your problem is likely that you have the option to stack the copy with the original turned on. First, right-click on one of these photos and go to the stacking menu. If Unstack is not grayed out then you have a stack -- select Unstack to reveal all copies.
To change the automatic stacking of edited copies from Photoshop, when you next choose to edit a file, in the bottom left corner of the dialog is the check box for unstacking. Clear it, and that choice should "stick" until you change it again.
Hope this helps!
Tony

Scenario Export /Import Issue: Import file error

The Procedure scenario when I am trying to import in higher environment, it is giving me error " Import file error" and when I click on Details, it shows following message.
I am trying to import scenario with INSERT/UPDATE mode and trying to replace with the same version. The scenario is executing fine in dev environment. What could be the cause. I have tried importing the same, 2-3 times ...even on different days with connecting and disconnecting the repository. What could be the reason. I am exporting the scenario from designer/procedure/scenario. using same option, I have exported the scenario many times but did not get any issue so far while importing into higher environment
&Exception track Trace 1 of 1
com.sunopsis.dwg.SQLWorkReposException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
     at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
     at $Proxy3.executeUpdate(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator$StatementInvocationHandler.invoke(RuntimeClassLoaderDataSourceCreator.java:163)
     at $Proxy4.executeUpdate(Unknown Source)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.generated.GeneratedSnpObjectId.insertAction(GeneratedSnpObjectId.java:271)
     at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2885)
     at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2908)
     at com.sunopsis.dwg.DwgObject.createMissingReference(DwgObject.java:6779)
     at com.sunopsis.dwg.DwgObject.correctMissingReference(DwgObject.java:6636)
     at com.sunopsis.dwg.DwgObject.correctMissingReferences(DwgObject.java:7206)
     at com.sunopsis.dwg.DwgDuplicationTools.createMissingRefAndReInsert(DwgDuplicationTools.java:2790)
     at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2385)
     at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
     at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6205)
     at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
     at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
     at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5410)
     at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:360)
     at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1221)
     at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:662)

actdi wrote:
This error is weird.+1 thats what I was thinking.
OP - Are you exporting from a Development work repos to an Execution Repos or another Dev Repos?

Split XML files with XSL result document

Hi All,
I have below xml file...
<?xml version="1.0" encoding="ISO-8859-1"?>
<T0020
xsi:schemaLocation="http://www.safersys.org/namespaces/T0020V1 T0020V1.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.safersys.org/namespaces/T0020V1">
<INTERFACE>
<NAME>SAFER</NAME>
<VERSION>04.02</VERSION>
</INTERFACE>
<TRANSACTION>
<VERSION>01.00</VERSION>
<OPERATION>REPLACE</OPERATION>
<DATE_TIME>2009-09-01T00:00:00</DATE_TIME>
<TZ>CT</TZ>
</TRANSACTION>
<IRP_ACCOUNT>
<IRP_CARRIER_ID_NUMBER>274845</IRP_CARRIER_ID_NUMBER>
<IRP_BASE_COUNTRY>US</IRP_BASE_COUNTRY>
<IRP_BASE_STATE>AR</IRP_BASE_STATE>
<IRP_ACCOUNT_NUMBER>55002</IRP_ACCOUNT_NUMBER>
<IRP_ACCOUNT_TYPE>I</IRP_ACCOUNT_TYPE>
<IRP_STATUS_CODE>100</IRP_STATUS_CODE>
<IRP_STATUS_DATE>2007-11-06</IRP_STATUS_DATE>
<IRP_UPDATE_DATE>2009-08-03</IRP_UPDATE_DATE>
<IRP_NAME>
<NAME_TYPE>LG</NAME_TYPE>
<NAME>A P SUPPLY CO</NAME>
<IRP_ADDRESS>
<ADDRESS_TYPE>PH</ADDRESS_TYPE>
<STREET_LINE_1>1400 N OATS</STREET_LINE_1>
<STREET_LINE_2/>
<CITY>TEXARKANA</CITY>
<STATE>AR</STATE>
<ZIP_CODE>71854</ZIP_CODE>
<COUNTY>MILLER</COUNTY>
<COLONIA/>
<COUNTRY>US</COUNTRY>
</IRP_ADDRESS>
<IRP_ADDRESS>
<ADDRESS_TYPE>MA</ADDRESS_TYPE>
<STREET_LINE_1>P O BOX 1927</STREET_LINE_1>
<STREET_LINE_2/>
<CITY>TEXARKANA</CITY>
<STATE>AR</STATE>
<ZIP_CODE>75504</ZIP_CODE>
<COUNTY/>
<COLONIA/>
<COUNTRY>US</COUNTRY>
</IRP_ADDRESS>
</IRP_NAME>
</IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
</T0020>
and i want to take this xml file and split it into multiple files through java code like this ...
File1.xml
<T0020>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
</T0020>
File2.xml
<T0020>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
<IRP_ACCOUNT> ..... </IRP_ACCOUNT>
</T0020>
so i have applied following xslt ...
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:t="http://www.safersys.org/namespaces/T0020V1" version="2.0">
<xsl:output method="xml" indent="yes" name="xml" />
<xsl:variable name="accounts" select="t:T0020/t:IRP_ACCOUNT" />
<xsl:variable name="size" select="10" />
<xsl:template match="/">
<xsl:for-each select="$accounts[position() mod $size = 1]">
<xsl:variable name="filename" select="resolve-uri(concat('output/',position(),'.xml'))" />
<xsl:result-document href="{$filename}" format="xml">
<T0020>
<xsl:for-each select=". | following-sibling::t:IRP_ACCOUNT[position() < $size]">
<xsl:copy-of select="." />
</xsl:for-each>
</T0020>
</xsl:result-document>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Now i want to apply this XSL to xml through Java Code...
TransformerFactory tFactory = TransformerFactory.newInstance();
Source xslSource = new StreamSource(xslFilePath);
Transformer trans = tFactory.newTransformer(xslSource);
trans.transform(new StreamSource(xmlFileName), new StreamResult( ????));
here how can i map new StreamResult( ) input parameter with xsl Result document argument ??
Please help me.....
Or Can you give me a link of Example which use result document and Java transform method to Output multiple doucment ??
Here new StreamResult take only 1 file as to be transformed ....

hi Tejas ,
I have done as you said but now able to generate multiple xml file .
I am giving you the xsl file i have used ....
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:t="http://www.safersys.org/namespaces/T0020V1" version="2.0">
     <xsl:output method="xml" indent="yes" name="xml" />
     <xsl:variable name="accounts" select="t:T0020/t:IRP_ACCOUNT" />
     <xsl:variable name="size" select="5" />
     <xsl:template match="/">
          <xsl:for-each select="$accounts[position() mod $size = 1]">
               <xsl:variable name="filename" select="concat(position(),'.xml')" />
                    <xsl:result-document href="{$filename}" format="xml">
                         <T0020>
                              <xsl:for-each select=". | following-sibling::t:IRP_ACCOUNT[position() < $size]">
                                   <xsl:copy-of select="." />
                              </xsl:for-each>
                         </T0020>
                    </xsl:result-document>
          </xsl:for-each>
     </xsl:template>
</xsl:stylesheet>
and i have done transformation like this ...
Transformer trans = tFactory.newTransformer(xslSource);
trans.transform(new StreamSource(xmlFileName), new DOMResult());
but not getting any result .
Can you please help me out ?
- Nisarg

Error when importing file with "

Hi,
In a text file if a field is having double apostrophe( " ), the file does not open in Import Manager. Get error as "Logon Error.... Line [x], Pos[1]". To test this,
1. Just copy paste the below 3 lines in a file
2. Open in Import manager with delimiter as pipe ( | )
3. Should get error
4. Next, edit the file, Find & Replace all " with any other character like ! & try to open the file now!
PRODUCT_TITLE_NAME|PRODUCT_ID|DESCRIPTION|BRAND_ID
ABC|142|Three unique|2637
XYZ|143|The "giraffe" is long|4315
Thanks,
Ketan

Hi Ketan,
Even I faced the same issue with MDM7.1 while importing the "| data.
The solution is simple you have to check that open double coates are closing are not.
I fthe data contains "| is not a problem with version unless it should be properly closed.
What we did was we remove open " coates or get the data with closed "
Hope it will help you
Thanks
Yugandhar

Import PowerPoint with animations into Captivate 4 ?

Can anyone let me know if it is possible to import a PowerPoint presentation into Captivate 4 AND keep all the PowerPoint animations exactly as created in the original PowerPoint ?
If this is not possible, what are the options ?
Thanks in advance,
Noel

Hi Noel
I think the PowerPoint to Captivate conversion is a mixed bag. Mostly, I believe folks will be disappointed with the process.
Certain animations seem to survive the conversion and others seem to fail. But the bottom line here is that we are taking a file created by a Microsoft application, sucking it into an Adobe application and expecting the result to work without a hitch. And I'm not sure how often we will see this work flawlessly. I mean, it's not unlike removing an engine from a Fiat and expecting it to seamlessly bolt up and work in a Volvo. There will be stumbling blocks.
To be honest, I'm amazed it works as well as it does.
The only way I'm aware of to create a Captivate that behaves exactly as the PowerPoint behaves is to present the PowerPoint show in a window. Then use Captivate to surround the window and record it using FMR as the PowerPoint does its thing. Any other way is likely going to result in having to fudge things here and there and tweak them to make them work as desired. Possibly even re-creating things here and there in Captivate.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Create new project files with uploaded word document

How do I create a new project file with an uploaded word document. I tried to follow the guidelines using the Robohelp PDF file but after I upload the word document, I cannot see it in the workspace. Are there other steps to bring the document into Robohelp 9. I am using the trial version and have never used Robohelp before.
Thank you!

I was finally able to fix my problem and I hope to publish this in as many pages as I can. First I had the exact same issue. My file was password protected (the one I used as a shell for a new project) spent two hours of work, went home and next
day “Nothing” same errors. Cannot open file etc. etc. So after two hours searching the net I found this company that has a
Project Repair Toolbox that is cloud based for FREE (no useless downloads).
I went in > It asked me for the file that I had on my local drive > prompted me for the password and > BAM! the file opened right up. Since it as viewer only I was able to at least begin re-typing the project plan which was small in nature.
Check it out, hope it works for you.
http://www.project.repairtoolbox.com/

Issues importing file with "copy into document option".

Similar Messages

Maybe you are looking for