Issues in Application table - extra white space with and without scroll bar

1. There is an extra white space that comes after the last column in all the applications table, when there is no scroll lbar.
[http://files.oraclecorp.com/content/Private/Screenshots/Space_ApplicationTable.bmp]
2. If the scroll bar comes up then, there is an extra white space on top of the scroll bar.
[http://www-apps.us.oracle.com/~jkodiyan/fusion/screenshots/appstablespace1.jpg]

It would be best to follow this up in your internal ApplCore / ADF frontend forum..
screenshot for issue #1: http://www-apps.us.oracle.com/~jkodiyan/fusion/screenshots/appstablespace2.jpg
That's an internal Oracle URL - Probably not a good idea to share on the internet and it's not accessible outside anyway...

Similar Messages

Why is there extra white space on below the navigation bar?

I am running Nightly 6.0a1, and for the past few days, there has been extra white space under the Navigation Toolbar, as though there is an extra empty toolbar. The only toolbar I have is the Navigation Toolbar. BTW, this happens w/ tabs on top and bottom. Here's a screenshot: [http://i1004.photobucket.com/albums/af162/cg2916/extraspace.png http://i1004.photobucket.com/albums/af162/cg2916/extraspace.png]

Do you see any toolbars listed in "Nightly > Options" that are visible but do have a check mark?
See also:
* http://kb.mozillazine.org/Corrupt_localstore.rdf
Did you try a new profile?

Extra White Space issue

Hi, I am currently building a website in Adobe Muse, and am really enjoying it. I have encountered a few differences between what I designed and what the site actually looks like and have been able to find solutions to all but one. The home page has just a header and footer and an Adobe Edge Animation. However, there is extra white space apearing underneath the animation (above the footer). Everything looks fine in the design mode, but even in preview there is extra space. I tried uploading it to our ftp, thinking that might be the issue (as the animation doesn't show in the preview mode), but the extra space is still there. I tried moving the Social media icons, thinking they might be causing it. I have looked to see if maybe there is a text box, or empty shape that is causing the discrepency, but I can't find anything. Any suggestions?
Here is the screen capture of the design mode:
Here is the screen capture of it in the browser:
Any help would be greatly appreciated.

Hi Razorcs,
I have checked your file and the white space is coming from the page that you are calling in the iframe. I have seen that most browsers do not respond well, when the widht and the height of the iframe is specified in percent.
As a fix you have to give manual width and height to the iframe and that should take care of it.
For example, try something like 412px, which is the height of the edge content,
Regards,
Abhishek Maurya

Extra White Space Around Header Graphic & NavBar

I have a header graphic and Navigation Bar (rollover images)
positioned inside a table. Unfortunately, there is about 1-2 pixels
of white space on the left, right, and top of the header graphic.
Same with the NavBar--there's 1-2 pixels of white space on the
edges (left & right sides). By default, cell padding for the
table is set to zero. If cell padding is set to zero, why am I
seeing white space between the edge of the graphic and the edge of
the table?
You can see what I'm referring to here:
http://newstartinvestment.com
What is causing this extra white space, and how do I get rid
of it?

On 26 Mar 2007 in macromedia.dreamweaver, csbridges wrote:
> I have a header graphic and Navigation Bar (rollover
images)
> positioned inside a table. Unfortunately, there is about
1-2 pixels
> of white space on the left, right, and top of the header
graphic.
> Same with the NavBar--there's 1-2 pixels of white space
on the edges
> (left & right sides). By default, cell padding for
the table is
> set to zero. If cell padding is set to zero, why am I
seeing white
> space between the edge of the graphic and the edge of
the table?
>
> You can see what I'm referring to here:
>
http://newstartinvestment.com
(Btw, I
> don't like the yellow rollovers--they'll be removed
shortly.)
>
> What is causing this extra white space, and how do I get
rid of it?
Personally, I thought that the white border was a feature,
but... In
addition to the cellpadding, add cellspacing:
<table width="780" border="0" align="center"
cellpadding="0"
cellspacing="0" bordercolor="#000000" bgcolor="#FFFFFF">
Joe Makowiec
http://makowiec.net/
Email:
http://makowiec.net/contact.php

Placed Illustrator PDF has extra white space

Illustrator artwork saved as PDF, and placed on an InDesign page comes in with extra white space of around 1 1/3 mm on all
sides. I can't figure out what this unwanted white space is or how to avoid it. Can someone please tell me how to avoid the extra white space.

in which case - i can only apologise for the incorrect advice.
I've never had any problems with eps files - providing that the artwork is tidy.
And I've found loads of problems printing a placed pdf through a digital rip.
I'll leave it down to trial and error... and wish the best of luck.
cheers
re

Extra white space in Firefox, not IE

Hello. I'm new to Dreamweaver and am having an issue I can't
figure out. I was hoping someone might have insight into where my
problem is.
In the following site,
http://www.firststepshr.biz,
it previews as designed in Internet Explorer. However, in Firefox,
extra white space (or blue background on the home page) is
appearing above and below the Flash header. I can't, for the life
of me, figure out why there's this difference.
Anyone have any ideas? Thanks, in advance, for the advice.
Jeremy

I don't see extra white space in FF2x.
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines may not parse Flash links - your site will
not be
spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
You will have
to remake those buttons.
It's usually a very bad idea for these reasons - and for
these reasons,
Adobe has removed Flash buttons and Flash text from the next
version of
Dreamweaver.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dwellingproductions" <[email protected]>
wrote in message
news:gckfd0$odl$[email protected]..
> Hello. I'm new to Dreamweaver and am having an issue I
can't figure out.
> I
> was hoping someone might have insight into where my
problem is.
>
> In the following site,
http://www.firststepshr.biz,
it previews as
> designed in
> Internet Explorer. However, in Firefox, extra white
space is appearing
> above
> and below the Flash header. I can't, for the life of me,
figure out why
> there's this difference.
>
> Anyone have any ideas? Thanks, in advance, for the
advice.
>
> Jeremy
>

How to extract ALL text on a line, including extra white space, from PDF?

I have written my first scripts to parse thru PDF files and successfully locate the beginning and ending of text portions that I wish to copy/extract. For example, one of the scripts reads thru PDF files and locates patterns that allow me to copy/extract a lengthy Title that spans several lines on the page. My remaining problem is that sometimes the text I wish to copy/extract has tabs or lots of white space between the words, and I need to retain ALL the "white space" between words. Basically, I am successful at using getPageNthWord(j, i, false) along with "Quad coordinate sets" to get a word-at-a-time for all the words on the multiple lines but it seems to be skipping over the tabs and extra white spacing beetween the words. Another way to say this is that I need to extract/copy a full line at a time, including all white space, instead of being limited to just a word at a time.
Can anyone help me with an algorithm to extract/copy text, not just the words but also including tabs and other extra white space characters? Is there some type of Regular Expression I should be using, or maybe some additional parameter used for getPageNthWord that would retain all the extra white space?
Thanks in advance,
Ted L

Did you try setting the bStrip parameter of getPageNthWord to false? It will
preserve some of the whitespace, but not all of it.
As far as I know, that's the only way to do it via a script.

How do I remove extra white spaces in a string?

How do I remove extra white spaces in a string?
trim() removes before and after spaces.
If I have a string "This is Test"
I want to remove extra spaces between words and also I want to keep SINGLE space
between words. So output should be "This is Test". Thanks.

replaceAll dosen't support with my version. Actually this works..............!!!!!!!!! Thank you.
                    java.util.StringTokenizer st = new java.util.StringTokenizer(brn, " \t");
                    StringBuffer buf = new StringBuffer();
                    while (st.hasMoreTokens()) {
                         buf.append(" ").append(st.nextToken());
                    String brn1 = buf.toString().trim();

Conditional Build Tab for image leaves extra white space

I've applied the "Print" Conditional Build Tag to an image in
my online help. When I generate the help and view it in the
browser, extra white space is inserted between the steps. For
example, instead of the steps being:
1.
2.
3. etc.
They now look like this:
1.
2.
3. etc.
Why is there extra white space where the image used to be?
Thanks in advance for your help. Using RoboHelp7 -- WebHelp.
Bill

Probably there is a paragraph break or a space that you can't
see but is not enclosed in the conditional tag.
Check the html code immediately before and after the tag.
Harvey

Why is there extra white space at the top of swf file?

I can't figure out how to get rid of extra white space in the browser at the top of a swf file. It looks fine when I preview the file, but when I do publish preview in flash/ try to incorporate in HTML, there's an extra 1/4" at top of window.

Do you have the html page (that you have the swf file embedded into) set so that there are no page margins? Your "body" tag should look like this…
<body leftmargin="0" marginheight="0" marginwidth="0" topmargin="0">

Remove extra white space from an image

I want to remove the extra white space in my image while writing it into a jpeg file using JPEGImageEncoder.
Any help is welcome .

ok.. Am having a JPanel whose width is set to 77000. But almost 60% of right hand side of the Panel is empty. I will create a BufferedImage from this component and then write it into a file using JPEGImageEncoder.
The empty portion of the panel is coming as a white space in the image.
Now how to remove this ? Was that clear enough ?

Why is there extra white space after exporting to JPEG?

After exporting an *.ai file to jpeg using 150 ppi and 5 for compression, I have extra white space below the artwork. This has happened in two files after exporting.

Urthie,
What about the Artboard, is that aligned to the Pixel Grid (it is if the size is a whole number of points/pixels and one corner is at X=Y=0 or another set of integer values, otherwise not)?
Edit: Cross posting.
Congratulations, some things are difficult to spot (and guess for others); your finding the solution is the best happy ending.

Issue with Multithreading and vertical scroll bar - help needed to debug!!!

I have been working on a desktop Visual Studio 2010 application for quite a few years. It is written in C++ and MFC. This code is a combination of code I have written and code I inherited. It worked great for years on Windows XP, but when I ported
it to Windows 7, a tricky problem has come up that I am having the darnest time trying to figure out
In summary, it is a single .exe desktop application. There is the main thread (thread A), which launches another thread (thread B). Both threads share a pointer to a single window object which displays events. This window also implements a vertical and horizontal
scroll bar.
The interaction and message processing between the threads seems a little sticky to me. Both threads A and B call the same member function of the CWnd object. BUT, Thread B ALSO posts messages to thread A's queue.
So, in thread B, you will see code like this, which makes a direct call to the output window object, AND THEN it also posts a message to Thread A's mainframe window like this...
if( m_pEventLog )
pOutputWindow->AddLine("Some test...");
if( m_phNotifyWnd[RECEIVE] && m_puiEventWMsg[RECEIVE] ) {
::PostMessage( m_phNotifyWnd[RECEIVE], m_puiEventWMsg[RECEIVE], 0, (LPARAM) pPkt );
WHEN thread A receives the message that thread B posted above, it only does the following:
LRESULT CMainFrame::OnSocketReceive( WPARAM, LPARAM lParam )
CSPkt* pPkt;
CRWPkt* pRWPkt;
CSPktSocket* pSocket;
ULONG ulType;
CString csTemp;
CBSWords bsWords;
CSSSWords sssWords;
CRWPkt* pLoopBackRWMsg; // used if we have to send a loopback msg back to sender
CLMsg lmsg;
m_wndTextWindow.AddLine("Test message");
return 0;
So both threads are writing to the output window via the .AddLine() member function.
void COutputWnd::AddLine( CString& strLine, COLORREF crColor )
UpdateVScroll();
return;
And this function then makes a call to :UpdateVScroll(). The problem seems to arise because thread B does a
post to thread A, where thread A in turn writes to the output window. Eventually, the program
HANGS in the call to
SetScrollInfo() below...
void COutputWnd::UpdateVScroll()
CSingleLock lock( &m_CSVertScrollLock ); // lock things up while we are in here
BOOL bok = lock.Lock();
if (lock.IsLocked() == TRUE)
int iMax = m_FifoIndices.GetHighestIndex();
if( iMax < ( m_iMaxViewableLines - 1 ) )
iMax = 0;
//SetScrollRange( SB_VERT, 0, iMax, FALSE );
//SetScrollRange( SB_VERT, 0, 9, FALSE );
SCROLLINFO scrollinfo;
scrollinfo.cbSize = sizeof(SCROLLINFO);
scrollinfo.fMask = SIF_RANGE;
scrollinfo.nMin=0;
scrollinfo.nMax= iMax;
SetScrollInfo(SB_VERT, &scrollinfo, FALSE);
lock.Unlock();
It doesn't take long for the program to hang...maybe about 10 seconds.
When I hit DEBUG->BREAK ALL, I get the output below in the CALL STACK WINDOW.
ntdll.dll!770070f4()
[Frames below may be incorrect and/or missing, no symbols loaded for ntdll.dll]
user32.dll!76c0cde0()
user32.dll!76c018d9()
>
mfc100d.dll!AfxInternalPumpMessage() Line 153 + 0x13 bytes
C++
mfc100d.dll!CWinThread::PumpMessage() Line 900
C++
mfc100d.dll!CWinThread::Run() Line 629 + 0xd bytes
C++
mfc100d.dll!_AfxThreadEntry(void * pParam=0x0022f6a4) Line 122 + 0x13 bytes
C++
msvcr100d.dll!_callthreadstartex() Line 314 + 0xf bytes
C
msvcr100d.dll!_threadstartex(void * ptd=0x004f97c0) Line 297
C
kernel32.dll!762cee1c()
ntdll.dll!770237eb()
ntdll.dll!770237be()
NOTE: If I never make the call to SetScrollInfo(), the program never HANGS.
Sooo....I am trying to determine if there is a fundamental issue with the way the threads are communicating that is causing the issue, or if maybe I have a memory overwrite. It always hangs in ::SetScrollInfo(), no matter what I comment and uncomment. This
makes me think that scroll bat behavior is different in Windows 7 than on XP, but I have not been able to find any documentation about it.
Can anyone provide any insight as to what may be the cause of the program hanging>

It might look like working but it will crash eventually. The windows are thread affine and other thread must never touch other threads windows. Sometimes you might get along but usually it just crashes.
Thread B must use PostMessage ( or SendMessage if suncronous action is require) to thread A's windows to achieve correct updating. Some very basic calls are implemented directly with SendMessage so they are safe to use but then you must individually check
which ones are safe.
Also having multiple SendMessage calls from B to A require rendezvous which might cause other problems ( thread B stalls or program deadlocks, depending on other program structure).
So PostMessage is the way to do it ( or create yourself another inter-thread mechanism, possible but usually too much troble)

5.2 Pages, how to create white space before and after paragraphs?

Hi everyone,
I'm having a very frustrating time with the new 5.2 version of pages after upgrading from a prior version. In the previous version, you could easily adjust the exact amount of white space before and after each paragraph. You were able to do this from within the inspector, but for the life of me, I cannot find it ANYWHERE in the new version and I'm ripping my hair out trying to find it.
Surely you must be able to control the amount of space before and after each paragraph? It's totally useless to me if I can't; I want to be able to format my documents how I want; ie. plenty of white space between paragraphs and list points, not all bunched up together.
Someone please help me! Thank you so much!

Try telling Apple that. Start by rating/reviewing Pages in the App Store.
I have been told repeatedly by Apple staff that the new User Interface makes it "Much simpler".
When I ask how? …and point out how many (more) hidden steps there are, they don't want to talk anymore.
Apple's standard response to just about everything lately, unfortunately.
btw If you have the choice, use Pages '09 instead. Less buggy and way more features, better laid out.
Peter

IMac 21.5" boots to white screen with vertical blue lines/bars then locks up

iMac 21.5" (mid 2010) Intel Core i3 4GB RAM with Radeon HD 4670 boots to white screen with vertical blue lines/bars:
Then it locks up after a few minutes, at which point the screen changes to white with these blue symbol things all over the screen:
If boot to Safe Mode, it still has the white screen with blue lines/bars, but eventually loads the login screen and I can successfully login and get to the desktop, but even that has the bars/lines.
Eventually, after enough restarts or hard shutdowns it will boot normally with no video/display issues. I've run disk checks, did the SMC and PRAM resets, checked logs (that I know of), and have even taken it completely apart, cleaned it out, reseated everything, put it all back together, but no change. I've read a few other posts about similar issues (but not quite the same video issue as this) where people had the logic boars replaced or reinstalled OSX, but that didn't always fix it. Any ideas? Has anyone seen this issue before? Thank you.

crw4096 wrote:
Is this a dead disk?
Very well could be.
If you can not startup from the Hardware Test, in Safe Mode or from > OS X Recovery as discribed in the Support article's.
Dig out the original Install Disc set that came with the iMac and do one of the following.
1. Attempt to Repair the Hard Drive.
Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your Mac OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
2. Run the Hardware Test from the second Install Disc.
1. Insert Disc 2 and Startup holding the D key.
2. Select the Extended Hardware Test.
Then if you still can not get anything going, you need to contact your Local Apple Store or AASP and make a Service appointment.
see > Apple - Find Locations

Issues in Application table - extra white space with and without scroll bar

Similar Messages

Maybe you are looking for