Issues in Change Request Management?????

HI all,
As a process of CHARM Setup, i have been struck at one step.before i ask questionsdat let me explain the landscape
1.I have one ECC5( C11) ,created a logical comp with system role=development in smsy
2.One more ECC5(Q11) , created another logical with system role = quality assurance in smsy
3.Solution Manager(S11)
4.Configured STMS ,making ECC5.0( DEV) as Domain Controller,and including Q11 and S11 in this transport domain.
5.Created a maintenance project assigned the two logical components and created img project for development , there is dropdown list showing development,quality and production
....................................My Questions are ..............................
since the two systems are ECC5 shud i create a single logical component and include client from Q11 and C11???
Should i generate IMG project for both C11 and Q11 in project administration, bcos we find a dropdown list developmemt,quality and production in, solar_project_admin->system landscape->IMG Projects. here when i select development from dropdown list it shows Q11 and if i select quality it shows only C11?????
Now when i execute the transaction /tmwflow/cmsconf. i find only C11 system in "system change ooptions" and "Critical object" TAB'S why Q11 system is not displayed??????
Rgds,
reddy

Hi Reddy,
since the two systems are ECC5 shud i create a single logical component and include client from Q11 and C11???
You should have one logical component and have C11 defined as the development system and Q11 as the Quality system.
Should i generate IMG project for both C11 and Q11 in project administration, bcos we find a dropdown list developmemt,quality and production in, solar_project_admin->system landscape->IMG Projects. here when i select development from dropdown list it shows Q11 and if i select quality it shows only C11?????
If you do the last step right, only C11 will show up for the development and Q11 as the quality. You should only create an IMG Project for the development system.
hope this helps.
regards,
Jason

Similar Messages

Solman Change Request Management Issue - about create task list

Dears,
We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
Thanks
Roger

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Solution Manager 3.2 SP 8- Change Request Management Configuration Problem

Hi friends,
We are in process of implementing SOLMAN 3.2 SP8 in our landscape.I am facing problem in configuring change request management.
When the developer is working on an urgent correction document we are facing a problem.The steps we are following are here under provided.
Step 1 :
Selected Action "In development" - > it created the transport request in the dev system.
Step 2:
Action "Log into System" -> made correction attached to the transport request manually and released the task.
Step 3:
Action "Release transport requests" -> The transport request in the development was released.
Step 4:
Went for action "Pass to correction" -> I am facing exceptions which conveys
Status was reset by system
A condition is not satisfied because of an exceptional situation
Not all transport requests yet released
And we would be thankful if you provide the authorization required for the different roles in the change request management.I have followed the help file of SOLMAN 3.2 and create the users as under
User - Role
SOCM_RQSTR - ZSAP_SOCM_REQUESTER
(Derrived from SAP_SOCM_REQUESTER)
SOCM_DVLPR - ZSAP_SOCM_DEVELOPER
(Derrived from SAP_SOCM_DEVELOPER)
SOCM_CHNGNGR - ZSAP_SOCM_CHANGE_MANAGER
(Derrived from SAP_SOCM_CHANGE_MANAGER)
SOCM_CHNGNGR - ZSAP_SOCM_IT_OPERATOR
(Derrived from SAP_SOCM_IT_OPERATOR)
Even then I am facing problems while developer creating transport requests and while logging into development system.
I tried adding S_RFC,S_RFCACL auth objects to their roles but did not help.
Pl. suggest.
Thanks & Regards
Mrutyunjay
Message was edited by: Mrutyunjay Rao Dora

Hi all,
We are trying to implement the Change Request Management piece in Solution Manager 3.2.
We are facing the following issues which I think relate to the same reason:
1)We have created a Maintenance Project in SOLAR_PROJECT_ADMIN and assigned it a logical component, which consists of our two system landscape (namely DEVàQAS). We have also created the IMG project in the DEV system and have distributed that IMG project to both the Solution manager system and the DEV system. Now we have to make the maintenance cycle and task list for that maintenance project, but as we select the project and click on create project cycle it shows the message "The project is not released. Hence cycle can not be created". It is showing the status of project as locked .How can we open or unlock the project to remove the error?
2) Also after selecting the SMI project when we click on the button CTS status switches or project specific Transport route it responds with the error "Project landscape not configured; set the project status to "open" first ".
3)When we click on synchronize single project it prompts for the login of connected system (Development System) and after login, it gives an error "Warning, problems during synchronization of the system Landscape".
For Error resolution, we have checked the system landscape and it does not give us any errors. We have done that, both from the solution manager by going to the transaction SOLAR_PROJECT_ADMIN --> >system landscape tab>selecting our logical component and doing a check by clicking the "Check system Landscape" button. It returns with "no Errors". We also did a check on the TMS configuration by logging directly on to the TMS domain controller system and checking the Transport routes. We have checked the RFC connections without any errors.
Any help would be greatly appreciated.
Thanks
Abhi

Error when activating change request management

Hello,
When I activate the flag: "activate change request management" in the tab Change requests in transaction SOLAR_PROJECT_ADMIN, the following error message appears:
Warning: Problems occurred during synchronization
of the system landscape
Any idea?
The solution manager release is SAP EHP 1 for SAP Solution Manager 7.0
Thanks and best regards,
Ana

Hi Ana,
Please go through this forum.
Re: Warning: Problems occurred during synchronization of the system landscape
If this does not solve your issue, please revert back.
Rajeev

Creating a New Task in SOLMAN Change request Management

Dear all,
We are using SOLMAN 4.0 and scm functionality.In the change request screen we have a create follow up task(+ icon on top left).What is the use of this task,can we asign a task to some particular person?for example can i assign task to tester?If the task has not completed the task,while closing the correction will it give error?
Please give your suggestions.
Thanks in advance,
Avinash.

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

SOLMAN- Change Request Management

we have a request from one of our customers a big insurance company, to use the "change request management" out of the SOLMAN for non-SAP solutions.
is it possible ? what are the advantages and disadvantages?
thanks
Amnon

Hello Amnon,
SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
Please use the following links which may help you in a better way....
Manually registering a non-SAP system in SMSY
http://www.sappro.com/downloads/NonSAPsystems.pdf
SAP Solution Manager Ready
SAP Solution Manager Ready
A General overall discussion on Solution Manager http://www.sap.com/platform/netweaver/components/solutionmanager/index.epx
Hope it helps.
Cheers,
Satish

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Change of systemlandscape in Change Request Management

Hi,
We have a Systemlandscape with 4 SAP Systems. Now we would like to reduce the landscape to 3 systems. We use the Change Request Management and we work with urgent corrections. Which are the problems by changing the landscape?Which is the best approach to get from 4 to 3 Systems without loosing any transports?
Best regards, S.Blaser

Stefan,
Have you checked SAP note 987927? It can help.
Regards,
Raquel Cunha

Change Request Management in Implementation projects or not?

Hello guys,
We are starting a Change Request Management project at a customer. We discuss in the blueprint phase whether we should be using it only for maintenance activities, and not for implementation projects. We have some people that can be working both in maintenance and also in projects at the same time.
We want to understand whether that scenario is possible and also whether is advisable. We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
What are the drawback, difficulties, considerations you may consider in making that decision? Is it logic to work that way or is it better just to implement it for the whole installation, including implementation projects?
Esteban Hartzstein
Edited by: Esteban Hartzstein on Jan 20, 2010 3:37 PM
Edited by: Esteban Hartzstein on Jan 20, 2010 3:39 PM

We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
this you can do either via SE03 / Display/Change Request Attributes / SAP_TMWFLOW Request created using Change Manager X X / Defaul for all client = Mandatory
or
you can achieve this by just activating the CHaRM in SolMan ( solar_project_admin / system landscape / CHARM)
Nesimi

Change request management in solution manger release 7.1 or 7.0

Hi All,
Can any body please explain me how to configure change request management in solman release7.1 and if it is possible please send document to my below maild Id.
And please let me know what are the steps needs to be done satellite systems, we have EP7.0 landscape also there .do we have to do any additional configuration for that in solman side?
I appreciate for your prompt response
Thanks in advance
My Id: haritechies gamil.com
Regards,
Hari Prasad . L

Hi
Adding more to it
Use the following link,
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
Regular correction
https://websmp202.sap-ag.de/~sapidb/011000358700000086572008E.sim
Later login to solman enter tcode SPRO and goto scenario specific Change Request management node and start configuring by
going through the IMG Help and as per requirement.
Create a maintenance project and Activate Charms
https://websmp202.sap-ag.de/~sapidb/011000358700005479242006E.sim
Regards
Uday

How big effort it is to setup Change Request Management?

We are interested in implementing Change Request Management into our Solution manager 7.0.
What size of an effort in mandays it actually is and what kind of professional roles are required to set it up? Some background information for your responses:
implementation project is already there in Solman (SOLAR01/02) and is already live
satellite system connections within SMSY are already active
no central CTS/CTS+ is currently in use
when having CHARM it is assumed that also CTS+ should be used
So, I guess we are in a typical situation where implementation project has ended and live and support organisation and tools are being setup. There we need CHARM and CTS+.
I have read lots of SDN threads and blogs, but did not get a clear picture how big effort setting up CHARM is. Please note, I not looking for config guides now, just your experiences. Even if am not interested in config guides, could you at least describe the main steps that are necessary in setting up CHARM?
br Kim

Hi
Adding more to it
Use the following link,
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
Regular correction
https://websmp202.sap-ag.de/~sapidb/011000358700000086572008E.sim
Later login to solman enter tcode SPRO and goto scenario specific Change Request management node and start configuring by
going through the IMG Help and as per requirement.
Create a maintenance project and Activate Charms
https://websmp202.sap-ag.de/~sapidb/011000358700005479242006E.sim
Regards
Uday

Document for Change request Management in Solution Manager

Hi,
We are setting up Solution Manager. I know service desk configuration. But I need a document on how to configure change request management in Solution Manager.
Also I need a steps or a document for monitoring of EP 6.0 from Solution Manager.
Thanks a ton for help in advance.

Hi,
Check out these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/b4406827-0a01-0010-3da2-f56b36d88510
BI and Portals 2006 [original link is broken]
very good collection of eclasses. for making use of solution manager.
Feel free to revert back.
--ragu

Bapi or Function Module for Change request Management status update

Hi,
Do we have any Bapi or function module to change the status of Change request Management.
Ex: If the status is in To Be Processed i have to change that status to Authorized using any Bapi or FM.
I have tried with the BAPI crm_icss_change_request but its not updating the status.
Do you have any idea on this???
Regards
Pavan

hello,
the function module is 'SOCM_STATUS_VALUES'
you can find an example of usage of it in the program CRM_SOCM_SERVICE_REPORT
    CALL FUNCTION 'SOCM_STATUS_VALUES'
      EXPORTING
        im_process_type       = report_list-process_type
IM_LANGU              = SY-LANGU
      TABLES
        status_values         = lt_vsocm_stat_propt.
I hope it helps
best regards

Change Request Managment setup for Solution Manager 4.0

Hi guys! Can someone help me on how to setup the Change Request Management in Solution Manager 4.0? I have already have checked the SAP Marketplace for any documentation about this topic but found none. I am configuring the two test servers (1 prod and 1 dev) in tcode SMSY. I have also configured the system role for each server. When I try executing /TMWFLOW/CMSCONF in SE38, no clients appear in the CRITICAL OBJECTS pane. Did I miss a required step in the implementation? I hope you guys can help me. Thanks in advance...
Regards,
Ronald Navarro

Hello Ronald,
Following the spro configuration will setup the Change Request Management scenario, each spro point has associated the corresponding documentation.
Also in service.sap.com/rkt-solman>solman 4.0>CCC profile you will find valuable information about how to use this scenario.
Hope this helps,
Dolores

Issues in Change Request Management?????

Similar Messages

Maybe you are looking for