Issues in CHARM, pls help

Hi,
          i have setup charm,created and transported a transport request succcessfully thru charm.now as there was problem in my development system i removed it and added another system as development in TMS and maintained SMSY also .i created an img project for the changed system. but when i go to transaction " /n/tmwflowcmsconf" in my solution manager 4.0 i see the old development system in "system change option" but not the new system
pls help, helpful answers wud be rewarded points
rgds,
rajesh

Dear Rajesh,
1.When you have configured Charm have you done it for maintenace project or for implementation project?
2.After changing the dev system have you changed in the logical component aswell and activated charm for the project?
Please check the above things and revert for any clarifications.
Thanks and regrads,
Avinash.

Similar Messages

  • Neo2 Plat Issues...Pls help

    Guys.
    Finally got my new Neo2 based box built and running xp.  However, I had some issues during the install, and continue to have some now.
    1.) During the install, my RAID would show up as 2 seperate drives in the partition dialog - one that's about 70GB, and one that's 139GB.  The RAID0 is made up of 2 74GB 10k Raptors on SATA 3/4. Now when I try to access C: in drive manager, it says its corrupted. The system has labeled the 70BG partition as c: and the 139GB as E:.
    2.) Warm reboots as well as some cold reboots are rewarded with the Detecting Raid Array message for a very long time.  I can reboot a few times and eventually get by this.
    As an aside, can anyone make some basic performance tweaking suggestions for the mobo with OCZ3200 Plat2 Dual Channel?  I can't figure out the whole timing thing, and am pretty freaked about baking this new box.
    I'm a total newb to building machines, I usually just program.  Any help would be GREATLY appreciated.
    Thanks!

    Falsedawn,
    Thanks for the tips - I added the sys specs to my signature.
    As far as what I've done - I've been lurking here for quite some time in anticipation of the hardware arriving, and I followed  K8N Neo2 SATA Raid problem finally solved
    and
    Single SATA or Multiple Drive Array Setup FAQ
    as my RAID guides.
    On the memory question - I'm not looking to OC right now, merely to make sure that I'm set for dual channel, and that my timings are right for the parts I'm using.
    Thanks in advance for your support - I'm in pretty desperate need of whatever I can learn from you guys.

  • Multiple Take Recording Issues...pls help.

    Hey everyone, I'm trying to record multiple takes on Logic Pro 9 with my keyboard (external instrument), the problem I'm experiencing is when I go right into my second take recording I hear the first take as well. Anyone know how to mute the first take so that my second take is clean without the distraction of the first take?

    Under the FILE menu, go to "Project Settings" > Recording
    Under MIDI - Overlapping Regions, select "Create Tracks and Mute in Cycle Record"
    See if that does it

  • Can u pls help me

    i m a beginner to form .i have an issue.can u pls help me to solve it
    i m working in forms6i.
    I have created a grid in a data block emp which populates data from Employee table. Corresponding to each row in the grid there are check boxes which can be checked and unchecked.The pblm is that we shld not allow the user to check two check boxes at same time.if so then the buttons(ok,cancel) should be disabled.
    How to do it.(write the code) can u pls help me.

    Hi User
    You have to pst this in forms forum forum id=82
    comming to ur problem
    in the when- check- box-change trigger you place the code in such a way and validate the whole block by checking is there iny item already checked. if so then set_item_property of the buttonss as disabled.
    Thank you
    Sasi
    [email protected]

  • HT4623 having issues with activating my iPhone 3gs after upgrading to ios6. Tried activating via itunes but no respite " says No sim inserted". pls help.

    Guys, I just upgraded my iphone 3gs to ios6, it took 2 hours get it installed. However asfter installing there are issues with activating it.
    Its getting failed every time..."says the activation server is temporarily unavailable".
    Tried activating via itunes but no respite " says No sim inserted".
    pls help.

    No, I did not find a way to fix it.  Went to Apple store to be told that the phone is dead and I would need to purchase a new phone.  A little frustrated with the fact that it is Apple who caused the phone to not work!

  • Hi I cant able to see some web photos in my ipad showing 'unable to load' .. Some photos able to see but still almost 90% I can't ...pls help me to clear this issue ...thanks in advance

    Hi
    My ipad is not able to see some of the photos .... I can see with google images and all .. When I am loading some applications or safari images getting the same issue ..first it's showing 'loading' then its happens like 'unable to load ' pls help me to solve the issue ..thanks

    When you say that you can't find them anywhere, I assume that you mean that you can't find them on the iPad even though the storage figure says that the photos are there.
    You can try this. I don't know if this will work for you but this was recently discovered as solution for phantom photos. This was copied from a post started by gail from maine
    Delete all of your Recently Deleted photos from your Recently Deleted folder
    Then go to Settings>General>Date & Time, and change the date back to last September when iOS 8 came out, and then go back to the Recently Deleted folder. Although at the Album level it will still say "0" if you tap on the Album, you will be greeted by all of the "Recently Deleted" photos that have surpassed the 30 day limit. Mine went back to when I installed iOS 8.
    She found this in a post where txforever  was the person that discovered how to do this.
    More photos in settings than photos app shows

  • Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

    hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

    nishaadp wrote:
    ... it stucks with the apple logo ,  nothing works. Is anything i can do?
    See Here for
    Frozen or unresponsive iPhone

  • My iphone 4 ios 7.0.2 wont detect 3g even after i restored it to factory settings.its a software issue  Pls help . I tried using another phone ang 3g works though

    Pls help...my phone just stopped detecting 3g, i called my provider and said that its a software issue. I did try restoring it to factory settings but no luck. Anybody can help me pls.. I would gladly appreciate it :(

    Hi and i appreciate your help. Its been updated to 7.0.4 now but still no luck here :(

  • Pls help.. Issue with plug in installation

    I am facing some issues in installing pulgins with flex
    builder3 through updater.
    Actually i am trying to install updates from flex builder for
    UML diagramming tools.
    After installing all the required packages, still the feature
    is not visible in the IDE.
    When i tried to see the problem. i noticed that the installed
    plugins are in disabled state. i cudnt see the option to enable.
    so anybody pls help me in that..
    Packeages i have added are: MDT, JDT, EMF, GMF, GEF

    I set up a new admin user account, logged in, but the problem persists.
    I take this to mean that you still can't mount any downloads. What you're saying is that you can't mount any .dmg file by double-clicking on it. Is that correct? If so, see http://docs.info.apple.com/article.html?artnum=75098 and http://docs.info.apple.com/article.html?artnum=106692 for potential fixes. One other thing to try is reinstall the 10.4.3 Combo update before trying to reinstall Safari or the entire OS.

  • IPOD TOUCH VERSION 5.0 APP ISSUES....HELP PLS!!!

    I JUST UPDATED MY IPOD TOUCH TO VERSION 5.0, AFTER IT FINISHED, IT WOULDNT LET ME OPEN UP MY PREVIOUS APPS SUCH AS PIMD, FACEBOOK, YAHOO MSGER N SO ON................. I TRIED RESTARTING IT AND IT STILL WOULDNT LET ME.......  WHAT SHOULD I DO, PLS HELP???

    I'm havaing issues with bluetooth remote app.  It is not pairing with my iPad anymore--no problems pre 5.0 update.  Bluetooth light on iPod touch does not come on nor does my iPad see it.

  • Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite ph

    Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
    & IMEI is : *****
    Br-----------------------
    Fazlur
    <Personal Information Edited By Host>

    It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
    If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
    If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
    You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • Hi, purchased a I phone5s last evening, had to change it due to a hardware issue, got a replacement  unit which comes in the white  box, is it a brandnew device or a refurbished device, really worried,  pls help thanks..

    Hi, purchased a I phone5s last evening, had to change it today due to a hardware issue, got a replacement  unit which comes in the white  box, is it a brandnew device or a refurbished device, really worried,  pls help thanks..

    Hi, if you bought the product brand new and was provided to you defective, you must be provided with a brand new replacement. Furthermore, if anyone provides refurbished phones, it must clearly state this either on the box or in the paperwork for that phone.

  • Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

    Hi All,
    I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
    2 of the DTP loads are extracting the data from 3 PSA requests.
    But, one of the DTP load is filtering on ONE PSA request.
    So, we are not getting the full data into DSO.
    Can some one pls help me why the DTP load is beheaving like this ???
    Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
    Cheers,
    Nisha

    Hi Jr,
    Sorry for late reply.
    I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
    I have changed it now and its working fine.
    Thanks,
    Nisha

  • Select statement issue- urgent pls help

    Hi
    The following select statement is always  failed, even LIKP table has data. pls help me
      LOOP AT LT_VBRP.
        IF LV_KEEP_VGBEL <> LT_VBRP-VGBEL.
          LV_KEEP_VGBEL = LT_VBRP-VGBEL.
          CLEAR LIKP.
          SELECT single  VBELN TRAID TRATY VERUR BOLNR LFDAT
          FROM LIKP INTO
          (LIKP-VBELN,LIKP-TRAID,LIKP-TRATY,LIKP-VERUR,LIKP-BOLNR,LIKP-LFDAT)
            WHERE BOLNR = LT_VBRP-VGBEL.
          IF SY-SUBRC = 0.
            LV_ASN_FOUND = 'X'.
          ELSE.
            CLEAR LV_ASN_FOUND.
          ENDIF.
        ENDIF.
        MOVE-CORRESPONDING LT_VBRP TO LT_LIPOV.
        IF LV_ASN_FOUND = 'X'.
          LT_LIPOV-VBELN    = LIKP-VBELN.             "ASN #
          LT_LIPOV-LFDAT    = LIKP-LFDAT.
         lt_lipov-verur    = likp-verur.
          LT_LIPOV-BOLNR    = LIKP-BOLNR.             "DDL#
          LT_LIPOV-KOMAU    = LIKP-VBELN.
    get the ASN line number details.
          SELECT VBELN POSNR MATNR ERDAT LFIMG ERNAM WERKS VGBEL VGPOS FROM LIPS INTO
          TABLE LT_LIPOV
           WHERE VBELN = LIKP-VBELN.
        ELSE.
          CLEAR LT_REP-VBELN.
          CLEAR LT_REP-LFDAT.
          CLEAR LT_REP-VERUR.
          CLEAR LT_REP-BOLNR.
          LT_REP-KOMAU = LT_VBRP-VBELN.             "Inv no
          LV_MESSAGE = TEXT-504.
          PERFORM CREATE_REPORT_RECORD_LIN01.
          LT_REP-LINE_COLOUR = 'C610'.  " red Intensified
        ENDIF.
        APPEND LT_REP.
        APPEND LT_LIPOV.
        CLEAR LT_LIPOV.
        CLEAR LT_REP.
      ENDLOOP.

    Hi Kumar....
    if statement should not be like ..
    if lv_keep_vgbel lt_vbrp-vgbel.
    Should be like this  if lv_keep_vgbel = lt_vbrp-vgbel.
    and try to use work area and table to select and loop the data...
    Have YOu checked whether da data in it_vbrp...
    there few error in way You are writing...
    And one more thing in the table LIKP the field BOLNR is 35 Char and VGBEL of VBRP is 10 char ...and your are equalling that to extract the data which will not happen even..
    So before select statement change VBRP-VGBEL as 35 char varible by using like this
    data : v_vgbel type likp-bolnr.
    loop at lt_vbrp.
    if lv_keep_vgbel lt_vbrp-vgbel. " Why did you right the statement like this
        if lv_keep_vgbel = lt_vbrp-vgbel.
            clear likp.
                call function 'CONVERSION_EXIT_ALPHA_INPUT'
                  exporting
                    input  = lt_vbrp-vgbel
                  importing
                    output = v_vgbel.
                  select single vbeln traid traty verur bolnr lfdat
                                                      from likp into
                                                     (likp-vbeln,likp-traid,likp-traty,likp-verur,likp-bolnr,likp-lfdat)
                                                      where bolnr = v-vgbel.
    regards,
    sg
    Edited by: Suneel Kumar Gopisetty on May 26, 2008 4:41 AM

Maybe you are looking for