Issues in EPM Add-in after installing MS Updates
Hi,
We have acknowledged of BPC EPM add-in problems after some MS Office updates. What we know so far is that this error occurs on BPC 10 NW version and it was delivered an SAP Note (2107965) with resolution/workarounds. On our system we have BPC 10 MS version.
What we would like to know is if this issue also occurs on Microsoft version or is exclusive to Netweaver version.
Do you have any information on this?
Regards,
Vitor Ramalho
Vitor,
As Arnold has confirmed, this issue impacts BPC NW, BPC MS and SAP Financial Consolidation as all three of these products use the same EPM Add-in front end.
Regards,
Peter Kreutlein
SAP Active Global Support
Similar Messages
-
TS1702 Has anyone had issues signing off of Facebook after installing iOS 6?
Has anyone had issues signing off of Facebook after installing iSO6 update?
Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.
-
after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6 -
Hello Mac Friends!
Need some help here!
After installing 3 updates from the "software update" app today (June, 11th) my macbook doesn' t initialize anymore.
Is there someone who can help me fix this issue?
Why this is happening?
How can i fix it?
Wainting some feedback...Two places to start with that would have been better:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovery Mode
http://support.apple.com/kb/HT4718
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.htmlhttp://macperformanceguide.com/Mac-HowToClone.htmlhttp://www.macupdate.com/app/mac/7032/carbon-copy-cloner
If you have backups, if you can and saved your ML installer, you can start over.
Prevention and taking a more proactive approach to system maintenance and repair, rather than fixiing a problem (likely pre-existing?) format the drive or partition and reinstall 10.8.1 and restore from backups.
Never had any issues? freezing? apps crashing before? -
I have been having issues with my computer lagging after installing lion.
I have been having issues with my computer lagging after installing lion. Can anyone please help me get the issue resolved? I need it in easy to follow language.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Microsoft Excel slowing down and other problems when SAP BPC EPM Add-in is installed
Hello,
Our client is having some problems with Microsoft Excel (MS Office 2013) since the SAP BPC EPM Add-in was installed in their computers.
They are suffering from Microsoft Excel slowing down, even when not connected to SAP BPC (10.0 NW version).
For example, when opening two or more excel archives, not connected to SAP BPC, Microsoft Excel crashes and is restarted with errors.
Have you experienced something similar in other installations?
Thank you very much, and kind regards,In relation to the previous post , we have to emphasize that we have installed in ours PC's:
MS Office 2010 14.0.7116.5000 32 bit,
EPM add-on version 10.0 SP20 (10.0.0.8993).
and our customer have installed in theirs PC's:
MS Office 2013 15.0.4675.1001 32-bit.
EPM add-on version 10.0 SP19 patch 1 .NET 3.5 compilation 936.
Thank you very much -
Cd burning issue after installing and updating snow leopard
After installing and updating snow leapard to the latest version, the cd burner for i-tunes quit working. it says" burning disk initializing" then "burning disk finishing" comes up with the error "the attempt to burn a disk failed. the disc drive didn't respond properly and can't recover or retry. Any suggestions to fix this problem?
First try other disks, brand new, then try another brand, then consider backup user files and (clean and polish then) c booting off the 10.6.3 disk and simply reinstalling OS X then updating to 10.6.8 again.
Hopefully this should fix the issue in OS X software, you may have to reinstall certain third party software again that it's kext files got kicked out of OS X by the reinstall.
If you get hung booting at any time, simply hold the shift key down and then update your software then reboot normally -
Saving Issues after installing latest update
Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). Any way to fix this?
Hi JasBell,
Which server are you trying to save to?
What happens if you copy the document to the local computer first and then copy to the server?
Regards,
Rave -
MacBook Pro hanging with blue screen and spinner after installing Software Update
Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
I was wondering what should I do? Do a force restart? Or leave it overnight?
Also, where can I find any information on what error is causing this issue?
I appreciate your responses and help.
By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.Kappy wrote:
Force a shutdown. Do not restart yet, but first do the following:
Repair the Hard Drive
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Next, boot into Safe Mode then restart normally.
Hi Kappy,
Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases. -
After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode.After installing security update 10.6.8 last night I've seen dialog boxes asking me if I will allow incoming network connections to certain root processes, e.g. configd. I didn't see these dialog boxes prior to installing 10.6.8. How do I make informed decisions? In other words,
(1) Where can I find 25-word summary descriptions of these processes?
(2) Where can I find discussions of the consequences of granting or denying these requests?
Alternatively (and at some risk of revealing metaphysical doubt) why am I being asked for these permissions? And who expects me to make correct decisions?
I have turned on th standard-issue OS X firewall and am running my system in stealth mode. -
After installing latest update the contact photos don't show on incoming call
After installing latest update the contact photos don't show on incoming call
Possible iTunes issue:
Try the following after adding photos.
Go to file
Then Home Sharing
Select photos to share
Click on All Photos already selected Do anyway
When Apply turns black click on Apply
Now go to Apple TV to see if photos there
Or restart iTunes.
Works for me every time photos do not appear on my Apple TV 3
Hopefully will work for you. -
Trouble after installing Security Update 2005-009
After installing Security Update 2005-009 I experienced some minor problems with Dashboard where some widgets no longer work and a more annoying problem with CodeTek VirtualDesktop Pro, which exits directly after launching the app (the desktop pager and menu appear and then the app quits). Tried repair of permissions, deleting of VirtualDesktop Pro's prefs, reinstalling the app, etc. - so far nothing helped. CodeTek does not answer my support requests. Has anyone experienced similar problems?
Power Mac G5 1.6 Mac OS X (10.4.3)I would completely uninstall all 3rd party widgets. Restart. Then see if the problem goes away.
It's likely to be an issue with one of your widgets. And possibly a combination of specific one with a specific another.
- Shilo -
HT201366 CAC readers not working after installing security update 2013-003?
Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.
For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
Black screen on startup after installing security updates KB293357 and KB2937610 on Win 7 64bit
After installing security updates KB293357 and KB2937610 (both related to .NET) on Win 7 Enterprise 64 bit, my computer fails to start up correctly:
- start up and windows boot screen
- then black screen and computer freezes
The only option to this problem I found so far is do a cold reboot and then let system repair uninstall the updates. Is there a better way to solve this problem?
System:
Asus UL80VT laptop
NVIDIA GeForce G210M (driver version 9.18.13.2702)
Win 7 Enterprise, fully updatedHi,
After you unstall the two updates, does the black screen issue completely disappear? We should first figure out whether the two updates are the culprits.
Since the two updates are related with .net as you mentioned, then here's a .NET Framework Repair Tool released by Microsoft, I suggest you try it and check if it cna detect something.
http://www.microsoft.com/en-in/download/details.aspx?id=30135
Check your event viewer and see if it recorded something valuable.
Yolanda Zhu
TechNet Community Support -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
Maybe you are looking for
-
Error in mru internal routine: ORA-20001: no data found in tabular form
Hi All, I am trying to do the Multi Row Update. Please go through the below process which i followes: > I have a table B which is of child table of A, the columns belongs to table B are B_ID, B_Name, B_Description and A_ID. > I have prepared a report
-
Unable to open the auth web of the ISE when pushing CA to Android phones
Hi GUYS, I have got a problem when pushing CA to Android phones from Win 2008, i have already connected to my SSID and got the IP, then i open my browser and enter http://1.1.1.1, the web is redirected to the Device Self-regist like https://ip:port/g
-
I get an error message when I try to re-launch Firefox. I believe I have closed it out. When I try to launch the application it gives me an error message saying it is already running. it tells me I need to restart the computer
-
Can we give our opinion?
My later post was deleted, cant we give our opinion ? i dont why people buy iphone 6, i wanted to buy but after seeing the outdated specifications, in comparison with other cellphones, samsung 1 year ago note3 ad better specfications than iphone 6, j
-
Playing a different transition between states depending on what state you're currently viewing
Not quite sure if I'm going to be able to explain this but i'll give it a go. I have 4 buttons that when clicked display content in an area. I want to set state transitions so that when i switch between the 4 states the content of the current state m