Issues in IDoc Sender Scenario:IDoc  with errors added

Hi all
         Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record  are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

  • Status 56 -  IDOC with errors added

    Hi everyone,
            I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 -  IDOC with errors added "<b>EDI: Partner Profile not available</b>".
            but i had already created Partner profile in WE20.
    Regards,
    Varun Reddy.K

    Hi Varun,
                   The below link will help u in solving u r problem
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
    Just try follow the steps followed in above mentioned link
    And also check u r RFC connection in TC "SM59".
    Reward with ponits if helpful
    Regards
    Sai Ganesh

  • Error in Receiver - IDoc with errors added

    Hi All,
    I am getting error in 56 - IDoc with errors added in receiver System.
    I am new in Idoc - please tell me How to resolve this issue..
    Thanks in advance..

    Hi all thanks for reply .
    All are the help full answer ,
    I use T-code WE19 and change partner profile and execute now it is fine.
    But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

  • Post system refresh, "Request IDoc : IDoc with errors added"

    Hello All,
    Post system refresh, we are not able to execute the data loads.
    While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
    Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
    However, transaction loads (delta) is facing issues.
    Today, we are facing the problem in both master and transaction data.
    Please help!!!! Its a very critical issue!!!
    Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

    Hi,
    While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
    Short text of error message:
    No RFC authorization for user XXXXX ( RSA8 ).
    Long text of error message:
    Technical information about the message:
    Message class....... "RSAR"
    Number.............. 051
    Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Please advice.
    Regards
    sneha

  • IDoc Collection Scenario (IDoc to Mail Interface)

    Hi,
    I am configuring IDoc to Mail Scenario using BPM.
    I gone through following link for develop the scenario. I am still unable to complete the scenario.
    Collect Idoc
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
    I have done following steps in my configuration. Please correct my steps if i am wrong.
    Source is Outbound Invoice IDoc (SAP System).
    Target is Inbound EDI 810 format send as a email(Mail System).
    1. Create an Abstract Interface for Invoice IDoc(MI_IDoc_ABS)
    2. Create a Message Interface for EDI 810 for Inbound(MI_EDI810_IN)
    3. Create an Abstract Interface for EDI 810(MI_EDI810_ABS)
    4. Message Mapping between Outbound IDoc and Abstract Invoice IDoc.  I did this as per one of the above link. but did not understand the importance of this. On Message tab of Message Mapping, it shows the occurance as 1 for both source and target. I did not see the mention of this mapping in the BPM. Not sure if this was required?(MM_IDoc_ABS)
    5. Message mapping between Abstract Invoice IDoc to Abstract EDI 810. On the message tab of message mapping, occurance of Source message is changed to 0-unbounded and occurance of target is kept as 1.(MM_EDI810_ABS)
    6. Define Interface Mapping for above mappings
    a) IM_IDoc_ABS - Outbound Invoice IDoc + MI_IDoc_ABS
                                  MM_IDoc_ABS
    b) IM_EDI810_ABS - MI_IDoc_ABS + MI_EDI810_ABS
                                 MM_EDI810_ABS
    7. Create a BPM in Integration process. Define 3 Containers namely
    a) collectIDoc - Abstract Interface - MI_IDoc_ABS
    b) collectIDocList - Abstract Interface - MI_IDoc_ABS(Multiline)
    c) targetFile - Abstract Interface - MI_EDI810_ABS
    8. Create a Block and define a infinite while loop with Block. Condition to be defined as (1=1)
    9. Define a deadline block withing Block with duration = 5minutes
    10. Define a Correlation in Correlation editor as SNDPOR as a ID.
    11. Define a recieve step inside infinite while loop with following properties
    Message = collectIDoc
    Start Process = Checked
    Use Correlation = Correlation
    Activate Correlation = Correlation
    Correlation
    SNDPOR = collectIDoc./INVOIC02/IDOC/EDI_DC40/SNDPOR
    12. Define Container operation next to recieve step. properties are
    Target = collectIDocList
    Operation = Append
    expression = collectIDoc
    13. Outside the block, there is Transformation Step with following properties
    Interface Mapping = IM_EDI810_ABS
    Source message = collectIDocList
    Target message = targetFile
    Acknowledgement = None
    Reciever From = Send Context
    Now the next step is to define Communication Channel and Receiver determination, Interface determination in the Integration Directory.
    I don't know, how to go further on these steps.
    In addition, could you please validate my above steps.
    I appreciate your help.
    Thanks,
    Gowri

    Hi Bhavesh,
    Thanks for the directions and help. I appreciate your help. I understand the steps but i am unable to implement it.
    I have few more questions on above answer.
    a) Do i have to create Sender Agreement?
    b) Do i have to import bmp process in Integration Process in Integration Directory?
    The steps that i carried out in Integration Directory.
    1. Create a Scenario EDI810_Scenario
    2. Create a party called EDI810_Party and EDI810_Service.
    3. In EDI810_Service, Receiver tab has interfaces defined. MI_EDI_IN and MI_IDoc_ABS. In sender tab, it is INVOIC.INVOICE02 (IDoc) and MI_EDI810_ABS.
    4. Define a receiver communication channel CC_EDI810_Receiver(RFC).
    5. Business System for SAP is defined in Service without Party.
    6. Defined Sender communication channel CC_IDoc_Sender(IDoc)
    7. Create Interface Determination (First)
    Properties are
    Sender Service : SAP Business System
    Sender Interface : INVOIC.INVOICE02 (IDoc)
    Sender Namespace : IDoc namespace
    Receiver Party : EDI810_Party
    Receiver Service : EDI810_Service
    Configured Inbound Interface is
    MI_IDoc_ABS and IM_IDoc_ABS
    8. Create Interface Determination Determination (Second)
    Properties are
    Sender Service : BPM_IP (Bpm process is imported in Integratio directory)
    Sender Interface : MI_EDI810_ABS
    Receiver Party : EDI810_Party
    Receiver Service : EDI810_Service
    Configured Inbound Interface is
    MI_EDI_IN. I do not see IM_EDI_ABS in the list. How do i get that.
    What step did i miss?
    Thanks,
    Gowri

  • Flatfile idoc sender scenario

    Hi all,
    we try to implement a flat file-XI-IDoc scenario. We receive flat files with idoc structure
    In ID I used sender file adapter and a receiver idoc adapter
    I have to use the option "File Content Conversion" in the file adapter and do I have to reproduce the whole IDoc structure in the content conversion parameters
    and since i get structure/segment name ahead of each line how to i handle this
    please see below
    adapter content conversion parameters:
    EDI_DC40.fieldFixedLengths     10,3,16,4,2,1,1,1,1,30,30,30,3,3,1,6,6,10,2,2,10,21,70,10,2,2,10,21,70,8,6,14,14,14,70,20
    EDI_DC40.endSeparator     'nlu2019
    EDI_DC40.fieldNames     TABNAM,MANDT,DOCNUM,DOCREL,STATUS,DIRECT,OUTMOD,EXPRSS,TEST,IDOCTYP,CIMTYP,MESTYP,MESCOD,MESFCT,STD,STDVRS,STDMES,SNDPOR,
    SNDPRT,SNDPFC,SNDPRN,SNDSAD,SNDLAD,RCVPOR,RCVPRT,RCVPFC,RCVPRN,RCVSAD,RCVLAD,CREDAT,CRETIM,REFINT,REFGRP,REFMES,ARCKEY,SERIAL
    EDI_DC40.keyFieldValue     0
    EDI_DC40.keyFieldInStructure     ignore
    E1EDL20.fieldFixedLengths     10,4,4,2,4,3,25,3,28,6,2,17,15,3,15,3,5,35,4,20,10,35,35,8,6,3,1,1,1,1
    E1EDL20.endSeparator     'nl'
    E1EDL20.fieldNames     VBELN,VSTEL,VKORG,LSTEL,VKBUR,LGNUM,ABLAD,INCO1,INCO2,ROUTE,VSBED,BTGEW,NTGEW,GEWEI,VOLUM,VOLEH,ANZPK,BOLNR,TRATY,TRAID,XABLN,
    LIFEX,PARID,PODAT,POTIM,LOC_SEQ,HOLD,MAX_ERR_TYPE,LE_SCENARIO,RECIPIENT_CREATE
    E1EDL20.keyFieldValue     0
    E1EDL20.keyFieldInStructure     ignore
    E1EDL22.fieldFixedLengths     30,20,20,20,25,30,40,20,20
    E1EDL22.endSeparator     'nl'
    E1EDL22.fieldNames     VSTEL_BEZ,VKORG_BEZ,LSTEL_BEZ,VKBUR_BEZ,LGNUM_BEZ,INCO1_BEZ,ROUTE_BEZ,VSBED_BEZ,TRATY_BEZ
    E1EDL22.keyFieldValue     0
    E1EDL22.keyFieldInStructure     ignore
    sender file:
    EDI_DC40  3000000001870383062700 3014  DESADV01                                                    DESADV                              X004010856   SAPD7B    LS  SAPD7B                                                                                ZSHIPNOTIFLISP0000000018                                                                                20100513233418                                                                                20100513
    E2EDK07001                    300000000187038306200000100000001000LLF000030003                       6910689255                                                 FOBFREE ON BOARD                                                                                Y5 H502                     oluquilla Wh Domestic              MX00
    E2EDKA1003                    300000000187038306200000200000102
    E2EDK03                       300000000187038306200000300000102
    E2EDK08001                    3000000001870383062000004000000020006910689255                                                 FOBFREE ON BOARD                                                                                Y5 H502                     oluquilla Wh Domestic              MX00                                    BC
    E2EDS01                       3000000001870383062000005000004030011
    E2EDS01                       3000000001870383062000006000004030216.645             KGM
    E2EDS01                       3000000001870383062000007000004030226.646             KGM
    E2EDS01                       3000000001870383062000008000004030236.646             KGM
    E2EDS01                       30000000018703830620000090000040301400001
    the above examples are not complete (just an example) Any help is appreciated.
    Thanks,
    siddu.236atgmail.com

    but the scenario is bit complex, we have SNC involved, we have existing scenario of sender idocs initially built,
    later sender told, he can only send flatfile idoc  - Can you elobarate complete your exitsting scenario if possible do the necessary changes existing one reason is below...
    You should not approach the FCC becuase it's not mandatory all the segments are fields will come always order..IF Data segments field order changed then your FCC will not work properly...FCC always assume that you are getting correct order 100%. I mean field order....
    Regards,
    Venu.

  • SAP CRM IDoc with errors added

    Hi Experts,
    I am facing  some issues related to IDoc processing.The errors I am facing while IDoc processing are as follows:
    1)E0(332) : EDI: Partner profile not available with IDoc status 56 & Idoc number 53
    2)HRMD_ABA  with IDoc status 52 & IDoc number 1
                           5-(000) : HR: ALE inbound processing for HR master data (Idoc No1)
    3)HRMD_ABA 22 with Idoc number 22
                           B1(005) : & &, &, &.
                                 No filters, Fields converted, No version change. (Idoc No 22)
    Kindly provide me the solution through which I would be able to rectify the failed Idocs.
    Thanks
    Warm Regards
    Vineet Joshi 

    Hi Vineet,
    Maintain Inbound/Outbound partner profile using tcode WE20.
    Thanks,
    Balaji P.

  • XML import issue in Primavera P6: "Process completed with errors."

    When trying to import a small XML file (from MS Project 2010) to P6 server via P6 V7 CITRIX client, then I receive the message "Process completed with errors. See log file for details.".
    But the log files are fine (no error, no warning, final validation status in log file is "successful").
    And no additional project shows up in the EPS.
    // Permissions checked. They are sufficient.
    // File is valid (importable by two other users to the same P6 server: one with local P6 V7 client, one via CITRIX P6 V7 client).
    // I used the same import template as the other two other users.
    // XML contains two tasks only.
    // No resources and no empty rows are in the MPP file, where the XML is created from.
    Does anyone know what to do upon this message, or where the "errors" can be seen (what is neither in the import log files, nor in the PrimaveraLogs folder (P6WebAccess.html), nor in detailed P6 application logfile (I had this activated, but it showed only called features without status, errors or warnings)).
    I highly appreciate any idea! ...

    Hello Rsandilands1
    I just read your query and I am very curious if you did find the right solution? It seems that I am having the same sort of problem.
    Best regards,
    Pal1

  • Idocs with errors added status-56 in file to idoc scenario- how to rectify

    hi ,
    in file to idoc scenario when i m sending the file from ftp server to IS Retail,  file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

    Hi,
    Have you configured the partner profile details? check these steps..
    1. In the receiver system you must configure the partner profile for your sender system in WE20.
    2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
    2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
    <a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
    <a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
    Regards
    San

  • PI 7.0: IDOCs struck in IDX5 with error "Time Limit Exceeded".

    Hi All,
    We have a File to IDOC scenario in PI 7.0. After mapping the IDOCs are posted from PI to ECC System.
    On a normal day this interface works good, yesterday we received a huge file which resulted in the creation of about 25000 IDOCs from one single file. The mapping went fine, however the IDOCs created were not posted into ECC System. When we monitor the IDOCs using transaction code IDX5 in PI system, we found the error message as "Time limit exceeded", the user shown was "PIAFUSER". To overcome this error, we increased the time limit of PIAFUSER from default to about 1500 seconds.
    Now, I want to push these IDOCs from PI into ECC System. Could you please let us know, how to push these IDOCs sitting in PI system to ECC?
    We do not want to reprocess the file from the beginning. Please let us know if it is possible to push the IDOCs without processing the file? If yes, how to reprocess?
    Thanks in advance.
    Regards,
    Manohar Dubbaka.

    Hi,
    the help documentation is as follows:
    Check the tRFC Status  
    Use
    tRFC calls which transfer IDocs use the function module IDOC_INBOUND_ASYNCHRONOUS at reception (before release 4.0: INBOUND_IDOC_PROCESS).
    If an IDoc in the sending system has been passed to tRFC (IDoc status "03"), but has not yet been input in the receiving system, this means that the tRFC call has not yet been executed.
    Activities
    To check the status of the tRFC calls, choose Tools ® IDoc Interface/ALE ® Administration ® Monitoring ® Troubleshooting ® RFC Queue (SM58) and specify any additional selection criteria.
    The program RSARFCEX restarts unsuccessful tRFC calls.
    You cannot choose the option is being executed in background processing.
    Best Regards,
    Erik Hubers

  • IDoc basic type FIDCCH01 with error F5866

    Iu2019m trying to create an iDoc with basic type FIDCCH01 and message type FIDCCH type.  Iu2019m getting error F5866 u201CWhen calling up the interface to financial accounting, no entry was made in the transfer parameter "Application key" when I process the idoc.  I do not see an idoc value by this name.  What am I missing in my config?
    Thanks,
    Stan

    Stan,
    First, I'd like to mention that you determine where the error message F5866 is used by entering this message in transaction SE91 and pressing the where-used function.  This won't show you any of the dynamic message calls, but it does indicate that function modules FI_DOCUMENT_CHANGE and FI_DOCUMENT_CHECK_CHANGE are both possible origins for the message you received.  These function modules are part of the FI Interface which I am assuming is called during the processing of your IDoc. 
    ACCHD-AWREF is one of the values passed to the FI Interface function modules, and message F5866 is returned when that field is blank.  This is why I assume that the IDoc in question is missing a value for the AWREF field.
    Based on that assumption, I checked the definition for the IDoc type that you mentioned, FIDCCH01, via area menu WEDI.  This IDoc type contains a segment E1FIREF with field AWREF.  You can use transaction WE02 to display the IDoc causing the error and check to see if the actual data for E1FIREF-AWREF is blank (ultimately leading to the blank ACCHD-AWREF value and error F5866).
    Cheers,
    Jamie

  • IDoc- XI scenario (IDoc should be sent by XI client 500)

    Hi,
    I'd like to set up a scenario mentioned in the subject. As a source SAP system I'd like to use XI client 500. XI client 100 is used as Integration Engine. How can I generate some IDoc from the source SAP system (XI cl 500) to import it into the repository?
    Or do I have to use the R/3 as the source system?
    Do you know some helpful links about the IDoc creation and so on?
    Thanx, Peter

    Hi Peter,
    To import idocs in the IR, you need to perform the followinf steps:
    1) In a SWCV you have a field Imported objects, right click on the link which then shows import of import of SAP objects, please click on that.
    2) A window appears which for <b>Application Server, Systenm number, Username and Password.</b> Please check the system name and its client before moving further. It should be XIserver and client--500 in your case. If it's not there then double click on your SWCV and change it.
    3) Enter the values in these fields, for example system number would be the same as it is given in the SAP logon window.
    3) Here you can see links for IDOCs and RFCs and you can import the IDOC you want.
    Hope this solves your problem.
    Thanks and Regards,
    Varun Joshi

  • File Sender Communication channel with error

    Hi,
      One of the File sender CC is in red but shows "Functioning". But in the Process Detail section it just showing
    5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
      5/10/11 2:24:00 AM                                                                     Processing started
    5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
      5/10/11 2:23:00 AM                                                                       Processing started
    5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
      5/10/11 2:22:00 AM                                                                      Processing started
    Please let me know is there any error with my channel ot wny is it red then?
    There is no Polling step in the Process Details..  Please reply ASAP
    Thanks,
    Shweta.

    The Status of the channel is "Processing Erros in  last 20 seconds". And in the processing deatils it just show the below two steps.
    5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
    5/10/11 2:24:00 AM                                                                        Processing started
    5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
    5/10/11 2:23:00 AM                                                                         Processing started
    5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
    5/10/11 2:22:00 AM                                                                        Processing started
    It is continuasly showing the same message ID "d28c6542-0d7e-453b-1d96-9e0a18159315 " but this ID does not exist in SXMB_moni  not in RTW message monitoring.
    If I double click the message ID shown in the CC process details it shoes me below content.
    Time Stamp Type Description
    2011-05-09 22:03:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    2011-05-09 22:04:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    2011-05-09 22:05:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    2011-05-09 22:06:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    Please tell me what is the problem. there are No java Locks ...I have checked that.
    Shweta.

  • RFC to RFC scenario fails with error

    Hello Guys,
    In our XI support we found errors for RFC to RFC scenario.
    Some messages failed with the below error :
    SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>503</SAP:P1>
      <SAP:P2>Service Unavailable</SAP:P2>
      <SAP:P3 />
    Latter the new RFC messages were having this error :
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Object not found in lookup of RfcAFBean.</SAP:AdditionalText>
    Now all the messages are getting processed.
    Can you please tell me the cause this happens every now and then.
    What is the solution.

    Hi Rajeev,
    See these threads:
    Re: HTTP_RESP_STATUS_CODE_NOT_OK - Error in ABAP proxy
    Re: 503 Error -  HTTP_RESP_STATUS_CODE_NOT_OK
    XIServer error raised: 503 Service Unavailable with SOAP Adapter
    http://www.saptechies.com/http-errors-in-xi/
    HTTP_RESP_STATUS_CODE_NOT_OK 503
    I hope these will solve your problem. Rewards with points if helpful.
    BR,
    Alok

  • SSIS 2008 R2 - Send email task with error in body message?

    Hi there, I'm newbie to SSIS.
    In Control Flow, I've Execute SQL task -> Data Flow Task (wirh some CSV export from SQL task)-> Send email on failure as shown in below screenshot. How can I get FOR ANY error message in
    Email Body inside "Send Mail Task- Failure" in case of failure?
    I found few articles on the internet but I'm newbie to SSIS and I need some step-by-setp guildeline to do this. Any idea? Many Thanks.

    Hi KM IT,
    You can enable logging for the package, and redirect the error message to a text file, and then display the content of the text file in the email message body.
    When configuring the logging, you can enable the logging for the entire package or each Control Flow Task. For the step-by-step guidance, please see:
    http://learnsqlwithbru.com/2009/11/26/configure-logging-in-ssis-packages/ 
    Then, in the Send Mail Task, you can configure the "MessageSourceType" property to “File Connection”, and select the log file. Of course, you can attach the log file as an attachment of the email.
    If you have any questions, please feel free to ask.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

Maybe you are looking for