Issues in Interest run

Dear Experts,
While doing the Interest Run thru F.52 I got this error:
"Following reference interest rates could not be determined. You must maintain them (transaction OB83)".
Reference                   Eff. From
J15.00                            01.04.2011
I have already maintained required Interest values in OB83 and also where ever else required in Interest configuration.
Can anyone please help me with some solution and guide me thru the process of Interest run (probably somewhere I am going wrong)!
Regards
Ashish

Dear Sachein,
Thanks heaps for the reply. All the customization is done properly and as per the link you gave. However, still problem is the same i.e. I have already maintained required Interest values in OB83 and still I am getting the same error. Pls help.
Regards
Ashish

Similar Messages

  • Issues with payment run

    Hi All,
    I am facing with a issue with payment run FPY1. Some of the customers are refunded the amount which is not supposed to be refunded to them. When i check the Contract account level and document level, at both level there is no outgoing payment method set. Is there any other way by which payment run would pick up the amount and refund it back to custmer.
    Kindly share your thoughts.
    Regards,
    Rahul

    Do you have a third level of master data?  In certain FI-CA systems there is a lower level of master data (i.e. contract, insurance object).  A payment method can also be set at this level.

  • FI- CA -  Problems with transaction FPINTM1 - Interest run

    I have 2 doubts with this transaction. The user has run this transaction with the option "all items" in Interest Parameters so this may cause several troubles for the Business partners.
    Question 1:  How can I reverse the interest run with fpintm1?
    Question 2: The option "all items" in parameters appears by default how can I change into " Open items only" ?
    Thank you a lot in advance,
    Regards

    Gred,
    Why do not you change your Invoice program so that Your Interest too shall be included in the Invoice?
    Rgds
    Rajendra

  • Interest run on F.24

    Dear All,
             I have a customer open item on dt. 01.01.2012 . But when I am executing interest run on 01.01.2012 it is not generating any newline  item (system is creating batch input thou). But it is generating line item when I execute interest run from 01.02.2012.Why is it so? Please guide.

    Hi Raj,
              Do like Accounting u2192 Financial Accounting u2192 Accounts Receivable  u2192 Periodic Processing u2192 Interest Calculation u2192 Arrears interest u2192 Free selections (or) F.24
    Customer Account u2013 ****** (xxx)          Company Code u2013 xyz
    Calculation period u2013 01.04.2007 to 31.07.2007
      Print form Form printer (batch) u2013 LP01
      Print account overview        
    Account overview printer (batch) u2013 LP01 and execute.
    Give Output device u2013 LP01,   Print immediately & select PRINT PRIVIEW button.
    Regards
    Sridhar
    Edited by: sridhar.shetty on Feb 28, 2012 8:08 AM

  • There is large time differnce in Outbound IDoc's for Interest Run posting

    Hi Experts,
    When i posting Interest Run (T.code : FINT) i am executing for a range of Customers(For 4500 Customers)
    using Background Job it took nearly 3 days to execute the job in Production and i found that there is
    no Partner Profile in WE20,IDoc's went in Error.Until this its fine.
    The major problem is there are group of 100 idoc's created in no time span and it took 4 hrs time gap to create
    another idoc 100 more idoc's.
    In between these 2 bunch of idoc's another 700 idoc's created for different message types.
    Can you please let me know why there is that much time gap for the same message type for Interest Run.
    Thanks in Advance.
    Regards,
    Sudhakar Reddy Allam.

    Bhishma,
    Just clarrification for you...when you said..
    "R/3 sends an IDOC with IDOC number 100. XI (by default) submits this IDOC to the 3'rd party system with IDOC number 200 (it's own internally generated number)."
    Here Idoc number 100 is outbound idoc from R/2 where as Idoc number 200 is inbound idoc...n they are totally different idocs..not same
    I think there is work around...while mapping data from XI --> 3rd party assign / store outbound idoc in one of the unused field of inbound idoc...and while mapping back use this field to map it back...I think this will work.
    Let us know the result.
    Nilesh

  • HT1199 Hi. I've got an issue with Pages running on Mavericks on Macbook air. Every time I open the app it hangs right there and I can't do anything on it. I've uninstall and install it back again but the issue still persists. Any help please?

    HI. I've got an issue with Pages running on Mavericks. Everytime I open it up it just hangs right there and I can't do anything with it. I've deleted the app and installed it back again but the problem sitll persists. Any help please?

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • Interest Run

    Hi
    While processing batch session of Interest Run, its asking document type. If I give manually (processing foreground), it works well.
    But, I would like to know how to get document type automatically. I could not find any such config at Interst calculations in SPRO. I m in 4.6C
    thanks in advance
    Sridevi

    Dear Sridevi
        In the screen where you will assign Gl accounts for automatic postings you can define the document type.
    menu->goto->document type...check it,reason for not picking doc type is it may be in empty.
    so, plz update the document type which you want to assign to it

  • Will I have a issues with ITunes running on a single PC?

    Will I have a issues with ITunes running on a single PC?  I have an IPad 1 and will be receiving an IPad Mini next week.  Th iOS is different and apps will use different versions. 

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
     Cheers, Tom

  • Transaction FINTSHOW (Interest run)

    Hi all,
    Have anyone worked on transaction FINTSHOW (Interest run)? Whenever I do an reversal of interest run, I need to generate a custom Credit Note form. My problem is how can I link my custom form to FINTSHOW? Is there a configuration that needs to be done? Thank you.

    Dear MAURIZIO
    How to perform this procedure?
    You will be saying to process the documents individually?
    Or I can fint process with multiple invoices and generate a document of interest (number of individual document) for each invoice?

  • Balance Interest Run F.52

    After running Balance interest in f.52 while posting following error I am facing.
    "Error when determining accounts to be posted to (posting interface)
      Appl Business t CoCo Int.ind.   Bus. Curre Chrt Replace
      Status
      0004 1000       1000 V1              INR   1000 150210
      Replacement of account symbol not possible"
    Kinldy help me in this reg.
    Narayana

    Hi
    I tried with standard A/c symbols only.
    Thanks
    Narayana

  • Issue regarding consecutive run for an Interface

    hi all,
    i have an issue regarding an interface
    if this Interface is a initial run for the file, you have to populate all the data of the people. That is , unlike other interfaces where we send only the latest record, in this interface we need to send all the records of the employees. in a employee has 10 records with different dates, we will pick up all the records greater than 1999 and pass it. whereas if there is a change in one field, then we will send all the record of that file. And If it is a consecutive run  then you have to populate changes only. the following algorithm can help you in this
    if intial_run EQ 'X'
    transfer IT_FINALDATA to XI.
    else
    Declare a 2 more internal tables similar to IT_FINALDATA...for our below example let us assume that
             DATA: IT_CLUSTERDATA type standard table of IT_FINALDATA.
             DATA: IT_COMPAREDATA type standard table of IT_FINALDATA.
    use the following statement to retrieve the data from cluster and comparing it
            IMPORT IT_CLUSTERDATA TO IT_COMPAREDATA  FROM DATABASE indx(zn) ID 'IN_8085'.
            Compare IT_COMPAREDATA with IT_FINALDATA
    If sy-subrc = 0.
    Means there are no changes, and no output required
    Else
    Pass the data to XI interface,  And store the internal table in the same INDX table, using the following statement
    EXPORT IT_FINALDATA to  IT_CLUSTERDATA FROM DATABASE indx(zn) ID 'IN_8077'.
    Endif.
    In this  can we deliver the changed data at every single consecutive run.
    Please let me  know,
    Thank Q
    Rohini.

    This is something where HR Interface Toolbox (PU12) can be very helpful, it will take care of changes from one run to another and you can configure it to send changes only in next run. But, you will need some ABAP in its user exits to restrict the data after 1999, and any other restrictions that you might want.

  • Hard drive issues...running out of ideas...opinions?

    Hello everyone!
    Let me start by saying that I love all of my Apple products. I've been able to use an iPod mini, another iPod, an iPhone, a Powerbook G4 and a MacBook with no daily or otherwise recurring issue; however, the reason I now have a MacBook is because the Powerbook G4's hard drive died. Sad, but after 3 1/2 years of problem-free use in college...I could justify the upgrade.
    I purchased the MacBook from my university at a nice discount back in March of this year (this was right after the newest batch was released). I was comforted by the fact that I'd more than likely have another 3-4 years before a replacement would be needed. Now, I'm not so sure...
    One day last week, a tab that was opened in Safari froze up, and a song playing in iTunes began to hang. I attempted a force quit of both, but with no luck. Eventually I had no other option but to shut the computer down. Afterwards, I began getting the infamous flashing question mark upon booting back up. I realized that I'd probably had some damaged files as a result of the forced shut down, so I began working with Disk Utility/First Aid to correct the problem. Luckily, I had no important files or programs to worry about, so I went for the Erase option and hoped I could just re-install the OS.
    Unfortunately it was not that easy. Now my hard drive is not showing up as Verified under the S.M.A.R.T. status, and the volume "disk1s2" will not mount. I tried everything I could find on these boards, still with no luck. So, I went for Disk Warrior today and crossed my fingers. When the menu finally loaded, there were 2 options in the drop down menu: the disk warrior cd, and an Unknown Drive. When I chose the latter, this is what I was met with:
    Directory cannot be rebuilt due to disk hardware failure (-36,2268).
    I'm almost convinced that I need a new hard drive. However, when I run the Apple Hardware Test, everything checks out fine. I ran it twice. Also, when I run a test on the hardware in Disk Warrior, I get this message:
    This hard drive's built-in SMART diagnostics indicate the drive is functioning normally.
    Now, with my old Powerbook G4, the hard drive doesn't even show up in Disk Utility. That I can understand. It needs to be replaced. But with this MacBook, all the tests indicate the hard drive is fine. The only blatent message about hardware failure I get is when I try rebuilding the directory with Disk Warrior. I know I'm probably just in denial, but when my computer is only 5 months old...I think I have the right.
    So, what is your opinion? New hard drive for the 5 month old MacBook (grrr)? Or is there still hope left?

    SMART diagnostics are by no means all-encompassing, so it's quite possible for a drive to pass SMART diagnostics but still be defective. My advice at this point would be to boot from the Installer, go to Disk Utility, and see if you can erase, or if that doesn't work re-partition (normally you'll choose to create a single partition) the drive. A badly corrupted disk catalog might not be reparable, but reformatting may work.
    If that also fails, then the probability of the drive being defective is quite high and replacing it will probably be necessary. The tiny drives used in laptops are by nature of their very small components more prone to failure than are other drives, though as capacity and performance rise, even desktop drives are becoming more prone to breaking.
    Hope this helps.

  • Hard drive issues; how to run hardware test

    A couple of weeks ago my hard drive experienced what I would call "minor crashes". The computer booted up to the grey box with the question mark, and would do nothing more. The hard drive also made unpleasant noises. I think I got it back by resetting PRAM, but it happened a second time, and then a PRAM reset again got it back. Needless to say, I'm nervous about this drive.
    I have Apple Care until January '09 (this is an '06 Intel machine) and figure I should try to move on figuring out what's up ASAP (both because I don't want a drive failure, and because I only have a few more months of Care).
    I'm guessing that I should run the extended hardware test, but I can't seem to get it going using the Leopard disk I used to upgrade the OS. Do I need the original install disks (which I can't find, of course!)? What else can I do to determine if I have an issue that calls for hard drive replacement? If I need a new hard drive (it now seems small at 250gb anyhow), will I be able to do it myself (assuming Apple Care won't take care of it)?
    Any insights welcome. Thanks!

    Give it a try, if not you'll need to dig up your Disk 1!
    +Some Intel-based Macs ship with Apple Hardware Test and Mac OS X 10.4.x preinstalled on the hard drive. If an Erase and Install installation of Mac OS X 10.5 Leopard is performed using a retail Leopard installation disc, Apple Hardware Test will be erased and not reinstalled on these Macs.+
    +If you're in this situation and need to use Apple Hardware Test, simply start from the DVD that came with your computer (not the Leopard installation disc) while holding the "D" key. Apple Hardware Test will run from the DVD.+
    http://docs.info.apple.com/article.html?artnum=306568

  • AppLocker service issue: AppIDSvc not running, but enforcement working.

    I have a strange problem with AppLocker.  I configured the service (AppIDSvc) and some policies using group policy and deployed it to some computers in my domain.  I logged onto one of the systems and verified that AppIDSvc was running, and that
    enforcement and logging were working correctly.
    Later, I decided to expand that policy to more computers.  I reorganized the policies somewhat, but the RSOP is the same.  I logged onto one of the new machines that I applied the policy to, and noticed that the service was not running and nothing
    audited in the AppLocker logs.  When I try to start the service, I get "System error 31 has occurred.  A device attached to the system is not functioning."
    This is strange, but what is more strange is that on the first set of systems I deployed AppLocker to, I am seeing the same behavior from the service: not starting, and attempts to start result in the same error.  However, AppLocker is still working! 
    It is still enforcing the original policies I created, and is still logging events.
    I did a little more investigation, and I see that the AppID service (which AppIDSvc depends on) is running, and must be the service doing the heavy lifting behind the scenes.  When I prevent the AppID service from starting (by removing it from [HKLM\SYSTEM\CurrentControlSet\services]),
    and restart the system; the enforcement/logging stops.  When I put it back, it restarts.  But, I cannot get it to start on systems other than the original test group, and obviously something is wrong that the AppIDSvc won't start.
    It's as if the enforcement mechanism (provided by AppId.sys?) cannot be called by the AppIDSvc, or AppIDSvc cannot access the resources in use by AppID; or something to that effect.  I have tried auditing the behavior of the system using procmon, but
    haven't made much headway yet.
    Any insight into this issue, or how to better troubleshoot it would be greatly appreciated.

    Despite hours of troubleshooting, just minutes after resorting to posting about this problem I solved it!
    The issue ended up being that when I updated my group policy to ensure that the AppIDSvc was enabled, in my due diligence to ensure that everything was set correctly, I selected the radio button for "Log on as: Local System account."  In fact, this
    service must run under the "NT Authority\Local Service" account, not the Local System account.  Once the account settings were corrected, the service started no problem.
    I have updated my group policy to fix the issue and all seems to be well.

  • MRP issue after MRP run

    Hello Everyone,
    We have a issue in the MRP process. When we run MRP it creates PR for additional quantity then needed not considering the Purhcase Order that exisits already. Below example will explain you in detail.
    Product A Plant ABC
    Stock 4
    Product A safety stock = 8
    Purchase Order creatred = 3
    So when MRP run it should create another Purchase requistion for Quantity 1 (4-8+3 =1). But it is creating a Purhcase Requistion for Qty 4 which means it is not looking into the Purhcase Order Qty 3 that is coming in. There is no minimum lot size or any rounding rule.
    Please can you tell me if there is a settings/config where we allow/not allow the Purchase Order to be considered during MRP run. I think it should be a plant specific config as for our other plant I dont see this happening.
    Any help will be appreciated.
    Thanks
    SAP Fan

    hi,
    Few checks:
    1. Check rescheduling horizon...
    2. check the plannning key set while running the MRP....is it NETCH...try with NETPL or NEUPL if doing for first time...
    Regards
    Priyanka.P

Maybe you are looking for