Issues in P6v7 saving layouts with UDF's and Filters

In P6v7 have created series of layouts which contain columns for UDF's and Layout Filters based on selecting green form Indicator type UDF's
The project activities have entries in the UDF's eg the UDF fields have entries for most but not all of activities.
When exporting the layouts as .plf files and importing into another version of P6v7 the UDF's come in correctly however the columns are missing from the spreadsheet.
Also when importing the layout filter criteria doesn't come across correctly - or at all.
Is this a bug or at the least a known issue.
Any help welcomed.

If you don`t already yuse the xfl file format instead of the fla, try this.
If possible dont use network drives for saving.

Similar Messages

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

How do I create a crystal report layout with a table and borders

My crystal report is a signin sheet. The sign in sheet has an ID column, Name column, Institution column, Place to signin column, and Weekday columns with checkboxes in each column for the visitor to checkoff.
How do I display the data that is being used int he crystal report in a table layout with borders around each cell? And is it possible to center vertical alignment of the data within eacvh cell like Excel?

Blahahaha! Great answer Deb!
Seriously though... There is no vertical alignment in CR. There have been several past threads related to this issue and all of them have various workarounds. None of them are very elegant.
The best workaround I've found (especially if you are grid or borders) is to turn off the boarders for the field itself and drawl a rectangle around the field(s). Now you can place the field in the lower portion of the rectangle and adjust the rectangles height to place the field text in the center of the rectangle.
This will give you more control over the height of your elements than using a carriage return before the text.
Jason

MacBook Pro desktop layout with built-in and ext monitor.

Hi,
I have been experiencing a problem that has become a major annoyance and inconvenience. It has to do with the layout of the icons on my desktop and how it becomes scrambled every time I change from my internal to my external monitor and vice-versa.
After organizing the files on my desktop in a specific arrangement I am always frustrated by how they become totally scrambled and disorganized once I change from one monitor to another.
Is there a way to avoid it ? I always use my view preference to "snap to grid" as I like to arrange my files in a specific order that makes sense to me. I would like to be able to have the MacBook Pro learn or memorize my preference for each of the two monitors so that changing from one to the other wouldn't require me to go back and organize the files all over again.
Any suggestions on how to address this problem will be very appreciated.
Thank you.

I have the same problem, but I am using Dell U2711 as the main screen, the Macbook is closed. It crashes, or rather logs me out an back in, when I try to run any photo editing software - Aperture or Iphoto. And I got this monitor to do some photo editing. I am pretty sure that the monitor is ok, it works flawlessly with my PS3 and satellite receiver in full hd mode. And my macbook has just been repaired - the nvidia problem, so it also should be ok and works normally when not connected to the external screen.
Any help Apple?

ACS issues in large scale network with Prime Infra and WAAS express

Hi,
I wonder if there is a common practice or a recommended way for deploying large scale network where there are Prime Infrastructure (PI) and WAAS Central manager keep logging into routers (scale of 1000 or more) to collect statistics. The way PI and WAAS CM collect stats from the routers (besides using SNMP) is that they log in (authenticate) themselves with there usernames and password and issue multiple show and config commands on the routers. Imagin this routine happens every 5 - 10 minutes with all 1000+ routers at the same time and the impact to the ACS server in terms of authentication requests and AAA logs. Appreciate if somebody could recommend a solution where these elements can work together in a large scale network.
Thanks,
Tos

The AEBS is connected to the TC via an ethernet run from the basement to the main floor... its not connected wirelessly.
The "extend" feature is intended for wireless, not wired connections. Since you have the base stations connected by Ethernet, the downstream router just need to be reconfigured as a bridge. The bridged router would then perform as a combination Wireless Access Point and Ethernet switch. Neither base station should be configured for "extending."
Basically, you will want both to be configured for a "roaming" network.
o Setup the base station connected to the Internet to "Share a public IP address."
Internet > Internet Connection > Connection Sharing: Share a public IP address
o Setup the remaining base station(s), as a bridge.
Internet > Internet Connection > Connection Sharing: Off (Bridge Mode)
For each base station in the roaming network:
o Connect to the same subnet of the Ethernet network
o Provide a unique Base Station Name
o The Network Name should be identical
o If using security, use the same encryption type (WEP, WPA, etc.) and password.
o Make sure that the channel is set at least three channels apart from the next base station.
while the TC is running at 2.4ghz since my MBP is connected at speeds around 240 to the AEBS at the same time that my ipod is connected to the TC at speeds of only 54 max.
The iPod is a 802.11b/g wireless device. It cannot connect at greater than the maximum bandwidth for that mode ... which is 54 Mbps, regardless of the bandwidth available.

Is apple working on a fix so it plays nice with internet security and filtering programs?

Question is in the title.
The conflict that causes us to disable internet security and filtering programs to get iTunes Store to open. Is that planning on being resolved?

None of us know, and you won't get an answer from Apple on here. We are users just like you. Although not everyone has problems with that, I know I didn't when I used iTunes on my PC.

Issue in offline email layout with program Z_RSWUWFMLEC

Hi All ,
We are using a customized report Z_RSWUWFMLEC for sending offline emails to the financial approver's .We have added vendor to the layout recently and given the same style(Aerial) and attributes as others. and we used a table for display it .and othere table to display all othere things.
We are getting perfect layout in SOST but when mail goes for inbox of the approver then the layout changes are not appearing like font , width of the column..etc.
Please help us
Regards
CB

Can anyone flash some ideas on this issue pls. I have to fix soon!
Thanks.

Saving video with iPhone 3G and 3.1

Ok so with the 3.1 I thought u could save video from email to camera roll?
I got some small clips from a friends blackberry but don't get an option to save the video?

Ok guys,
I thought I was losing my mind until I came upon this posting.
I have the exact same issue as you all - battery stays full, no incoming/outgoing calls unless rebooted.
I have a "fix" that doesn't require a reboot - switch your iPhone to airplane mode on/off a couple of times!
I know this works since...get this...I had the EXACT SAME issue 1 year ago with my Samsung Blackjack! It would not receive/place calls or texts and the problem would not go away until the "radio" (phone functionality) was reset.
Since the Blackjack took about 3 years to reboot, I figured out the fast way to "reset" it - airplane mode on/off. Works on the iPhone as well. Just confirmed it TWICE today ;(
I honestly believe this is a problem with AT&T, NOT Apple. Somehow the 3.1 update is causing the issue to manifest itself, but it has to be something to do with AT&T.
Can anyone else confirm this problem on phones other than the iPhone?

This.layout with two pages and cover sheet

Hello @all,
in the documentation for the "doc properties" and "layout" section I only find the following strings:
SinglePage
OneColumn
TwoColumnLeft
TwoColumnRight
TwoPageLeft
TwoPageRight
I set it for the active document with the following command in my JavaScript:
this.layout = "TwoPageLeft";
But what is the right entry/string, if I want the "two pages view" with an "single page"-cover sheet?
That means, I need a command/string for my document where only the first page is in the middle and alone and the other pages (starts at the second page) must be two next two each other.
Regards,
Jessi

And i suppose i could suppress any other fields from page one based on the same flag. But ideally as they layout is common i was hoping not to have to do a subreport to lay it all out again.
Could i not based on a flag on the group footer or header say if this flag is true start a new page and then on the feilds the ones i want to hide or show say something like if page two and x is ture then show or hide as need be??

Strange Issue with Guided Nav and filters

Hi All,
I am have a very strange issue with the guided navigation.
I created an answer in BI and when I look at 'Display Results' in Answers everything shows up fine.
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= current_date-1) AND (LU_ACCOUNT.TERMMATDATE <= current_date+89)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
But when I link to this answer via guided navigation the filter seems to change??
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (LU_PRODUCT.MAJOR = 'CML') AND (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1) AND (LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Dashboard=/users/administrator/_portal
Dashboard Page=Loans Maturing
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
I am just it is going to the same report. Any ideas on why this is happening??
Thanks

Yes,
these are simply two different reports, as you can see from the filters...

Report layout with User default and gobal default

hi,
any authorization to control report layout, only some user ID can use "user default" layout, and part of user available to set the layout as default
thanks

Is is a custom-developed ALV report or an SAP-supplied one?
If if is custom-developed, you can register the following user-commands
&AVE - Save layout
&OL0 - Change layout
&OAD - Select layout
in parameter IT_EVENT_EXIT of REUSE_ALV_LIST_DISPLAY. When these user-commands are triggered, control passes to the user command routine in your callback program. In the callback routine, you can implement authorization/security checks.
Also look at parameters IS_VARIANT and I_SAVE to control use of variants.,
If it is an SAP-supplied program, try using the auth-object mentioned in my earlier post.

Help with saving movie with best quality and smallets size. PLEASE

I need to know how to save my movies with the best quality and the smallest file size. I'll be posting primarily to the web, so I need to keep my file sizes to a minimum, yet I want to retain as best quality as I can. ANY assistance is greatly appreciated!

[email protected] wrote:
> I need to know how to save my movies with the best quality and the smallest file size. I'll be posting primarily to the web, so I need to keep my file sizes to a minimum, yet I want to retain as best quality as I can. ANY assistance is greatly appreciated!
Flash video is becoming popular because you can have a player embedded
in your web page that will stream video that will play on nearly any
browser without additional plug-ins. You can get decent quality at a
decent size.

HT201263 i have to go to the apple store for a issue that i was having with my phone and my cellular carrier said that apple might have to replace my phone and since im still under warranty will i be chared anything

ghfhg

If its actually a hardware issues then you shouldn't be charged. Have you tried all the troubleshooting steps in HT1808

How to import layouts with live type and vectors?

I seem to have run into a stumper on basic AE workflow. I want to set up a workflow where I can lay out designs in one app, and then bring them into AE to animate, and fly the camera around. My intent is to do infographics like this: http://vimeo.com/25123730 (OK, well, not nearly that slick...yet)
The difficulty is, if I lay out my design in Photoshop, after I import it, it will let me convert the type to live type, but the vector shapes are all rasterized, and I can't get them as vectors. If I lay out in Illustrator, the shapes are all crisp vectors, but my type is rasterized! I'm thinking that there's something I have to be missing here.
What's the solution?

There's actually a very simple solution that I use all the time. You simply convert your type to outlines in illustrator. I do this kind of stuff at least once a month. That's the only way to go. A side benefit is that you get to work with much smaller file sizes and much faster rendering times when you're doing really big 3-D moves on a really big piece of artwork.
The only catch is that some typefaces do not convert to outlines very well. You just need to make sure by carefully examining the conversion.
Another trick is to duplicate the type layers before you convert them. I move all of the duplicated type to a separate layer that I keep at the bottom of the stack in case the client wants, and they always want, changes. That bottom layer is simply kept hidden.
If I really need to use a text animator on one of the lines, I will use the illustrator layer as a placeholder and just simply type in the word or words. Most of my designs do not involve heavy use of text animators. These tricks will work until After Effects has the ability to import LiveType from Illustrator or vector shapes from Photoshop.

How to display 2 layouts with 2 different Header and Footer in a template.

Hi,
I am using XML Publisher 5.5. I have created one template which is having two layouts. I am using <?Start: Body?> and <?end body?> for displaying Headers and footers. Now my problem is, I need to display first layout with it's associated Header and footer and then second layout with other header and footer. But the two layouts should come in single template file. How is it possible?. Is there any work around? Please help me as this is the urgent requirement to my client.
Thanks.
Siva.

No problem. Select Insert -> Break from the menu bar. Then select a "Section Break" - Next page.
Header 1
<?start:body?>
Page 1
<?end: body?>
Footer 1
==================Section Break (Next Page)=================
Header 2
<?start:body?>
Page 2
<?end: body?>
Footer 2
Worked like a charm.
Klaus

Issues in P6v7 saving layouts with UDF's and Filters

Similar Messages

Maybe you are looking for