Issues in REM Profile(AGI)
Hi Gurus
We are working of REM , we are using AGI Profile for Goods issue, from last 3 or 4 days we have started facing problem in that
when we are running AGI , it is giving message (Changed REM profile regarding generation of postprocessing records & Collective mess. for mat. XXXXin plant XXX with version 0001 not executed on 20100319* )* in this it is showing for one or 2 material whereas it is runnning fine for other materails
It is also running fine for other 2 plants
Please help me
Hi,
1. Did u change the Rem Profile any time recently ?
Reg
Dsk
Similar Messages
-
RM887- change rem profile regarding generation of postprocessing records.
Hi,
While doing MFBF (GR GI) I am getting error "change rem profile regarding generation of postprocessing records" Message No RM887. I am using same REM profile for many other materials for which MFBF is working fine. There are no COGI errors pendings for the materials for which I am gettinh error. But in MF47 there are some pending records which I neither can change nor delete, I am geting same message as in MFBF in MF47. So I have two issues here 1) How to adress error in MFBF. 2) Why records are seen in MF47 and not in COGI?
Thanks
Suresh.Dear,
Please refer the OSS notes 383141,202654, 885798.
In OSP2 Transaction, check whether the REM Profile having the Tick for "Create Cumulated post processing records".
If this is not there, and allowing the entries to go to COGI with Execute Correction in dialogue mode "Optional" will be a problem
Please try and come back.
Regards,
R.Brahmankar -
Kanban : Changed REM profile regarding generation of postprocessing records
Dear Gurus,
I am trying make a kanban container from empty to full and i am getting the below error message.
Changed REM profile regarding generation of postprocessing records - RM887
I have not change the production version or rem profile. This error is when i scan them to FULL so I have not used "Execute correction in dialog box mode" option in OSP2. NO COGI errors...
Any advice is highly appreciated.
Regards,
Senthil
Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:54 AM
Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:55 AMDear Senthilkumaran,
Was there any changes made in the REM profile in OSP2 related to creating individual post processing records or cumulated,if not
was the REM profile changed in the material master?
Can you please check this and reply?
Regards
Mangalraj.S -
Changed REM Profile regarding generation of postprocessing records
Hello Team,
I have tried to backflush a part number. I get this error:
Changed REM Profile regarding generation of postprocessing records
The intrigue here is that this same part number was backflushed last week without error.
I will appreciate your inputs.
Thank you in advance.Joel,
Check the material master for changes in REM Profile assignment, looks like the REM profile assigned to the material does not allow Post Processing records, so if there are errors during backflush like less stock, no storage location, batch not assigned, system would give error and it would not allow you to post the backflush.
If there are no changes in the material master for REM profile assignment then the assigned REM profile itself must have been changed in configuration in the path mentioned by fellow forum member. Please check and for "Error correction for backflushing" section definations.
Regards,
Prasobh -
REM profile Product Type - Cost Collector Order Type
Hi all,
I am trying to create a Repetitive Manufacturing Profile, at that time standard Production Type PKMN is automatically arriving from table V_T437S_GES.
and I would like to assign the cost collector order type (self defined) to the REM profile which I am going to create.
where I need to assign the cost collector order type for production type "PKMN" while creating REM profile.
If I copy the exisiting REM profile and I am able to get the cost collector order type that I am able to see in TABLE : T437S (Repetitive Manufacturing Profile Table). If I create the REM profile newly, I am unable to get the cost collector order type in the table T437S.
So please guide to the self defined cost collector order type for newly creating REM profile.
Thanks in AdvanceMadhan,
Order type "PKMN", is internally defined by SAP. Forr all cost accounting purpose, we would be using standard order type "RM01" when creating a new product cost collector for material. If required you can create your own order type say "ZM02" using transaction KOT2, please remmember you need to create with order category "05"- Product Cost Collectors.
This new Order type can be used when we are creating product cost collectors for a material.
I really dont find a reason why a new Order type is required to be created. Can you explain why?
Regards,
Prasobh -
Dear Gurus,
While backflushing in REM for GI, the quantity of components are issued as defined in BOM. But the actual consumption may differ.
So how to post actual consumtion of components in REM. Is there any separate TCode for goods issue in REM other than MFBF.
Helpful answer will be rewarded for sure.
Thanks and Regards,
JejeshDear Jejesh,
In REM as you said if the actual consumption is not equal to the BOM quantity,then you can modify using the button for Post with
correction and manually change the quantity as per to consumption.But generally authorization is limited for this.
But generally instead of this carryout the assembly backflush for posting the actual GI,activities,GR and for the extra consumption of
compoenets,use component backflush and post GI.
Later on for tracking purpose this procedure will be easy.
So you will be getting 2 different documents one for your actual posting and one for component backflush.
Regards
Mangalraj.S -
Backflush and REM profile and control key ...
Hi all,
in REM manufacturing, the backflush is control by routing control key or REM profile settign in configuration ?HI..
In REM scenario the backflush is controlled only by REM Profile.u can configure it in SPRO.
path is ..production> Repetitive manfacturing> control data> rem profle
u can create with the help of assistant given in SPRO
plz revert me if it works for u
Regards
Anupam Sharma -
Hi,
In Repetitve Manufacturing , i was doing Assembly backflush.
If i want to do Activity backflush with reporting point, ( I have maintained Milestone control key also in Routing) whether i have to change my REM profile in Material master.?
If i am changing , system shows the error related to costing.
Help me out of this. I would like to understand this process clearly.
Santhosh.Dear Santhosh,
Assuming you have made the configuration changes to the existing REM profile in T.Code OSP2,now modify your routing/rate
routing with operations containing milestone confirmation set control key.
If my understanding is correct then I dont think a new PCC is required for the same material.Instead in KKF6N--->enter the
material,plant,select the production version,now click on change mode--->Shift+F6 and then click on cost calculator for pre.cost
estimate for the product cost collector(Shift+F1) and then save the data,now check in MFBF as I have explained in my earlier
thread.
check and revert back,
Regards
Mangalraj.S -
Bacgflush error: Change REM profile
Hi Gurus,
I have tried to backflush a part number. I get this error:
'Changed REM Profile regarding generation of postprocessing records'.
From my knowledge we didn't chnge the REM profile and product cost collecter is also avilable.
Please help to resolve the error.
Thank you.
NaveenDear Naveen,
Check whether did you make any config changes in the REM profile in OSP2 or else assigned some other REM profile which
allows reprocessing.
In my understanding if already some reprocessing exists for that material in MF47,and if you try to change the REM profile and
try to backflush,this will give this error.
Check and correct me if i 'm wrong.
Regards
Mangalraj.S -
REM profile for finished material and its raw material
Dear Experts
My question is ,for a repetitive manufacturing scenario
1) We are maintaining REM profile finished material . Is it necessary to maintain REM profile for its raw materials ?
2)For raw materials do we need to create the seperate REM profile which is having seperate stock determination rule ?
Regards ,
Vishwas.KDear Vishwas,
1.REM profile assignment is required only for the materials for which production confirmation will be made through T code MFBF or
MF42N.
2.For stock determination rule check in control data 2 in the REM profile itself. This setting is linked to the REM profile and further to
the goods movements posting for the raw materials.(check this setting in T code OSP2).
Regards
Mangalraj.S -
Bloqued Stock Default into REM Profile
Hi everyone:
I need to know how can i be able to set the Stock Type to REM Profile, 'cause I need that the result of the Posting into MFBF T.code be Blocked Stock, instead of, Unrestr. Stock.
I was trying by the REM Profile into: IMG guide: Production> REM > Control > Profile... but... I don't get to find out the check or the configuration parameter to set this stock type. I know that into the MFBF there is a function with F5 to Change Detailed Setting but, I need this parameter pre set for all access into that screen and don't is changing it each time i go to this T code.
Please & Thanks in advance for your help.
Regards
Omar PereaHi OMAR ,
Could you pleasse breif How you did the setting, even i require GR atomatic By MFBF, I tried with 103 it is giving Below error ,
Update control of movement type is incorrect (entry 103 X X _ F)
Message no. M7226
Diagnosis
The system could not find entry 103 X X _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
so could u explain me the process how u did ,
Thanks in advance.
Madhu -
REM profile and reduction period
Dear SAP consultant,
In REM profile setting, what the meaning of Reduction period (days) ? If i set to 30 days, can i backflush plan order earlier than 30 days ahead ?
RejoiceDear,
Reduction period at OSP2 we define time for planned orders to be reduced.
If you enter the number of daysas 30 then system is to take into account when reducing the production quantities after 30 days. The period of reduction is calculated by adding the number of days you enter here to the backflush date.
The 30 days will be taken as working days from the factory calendar and these days will be added to the backflushing date (means 30 working days in future).
Hope clear to you.
Regards,
R.Brahmankar -
Hi,
We are using REM profile as GR and GI seperated.
We did GR on 21.11.2007
We did GI (MF70 in background) on 23.11.2007 but the posting date is 21.11.2007.
We want the posting date to be 23.11.2007 rather 21.11.2007.
Please give your suggestions.
Thanks,
KumarHi Reddy,
MF70 is scheduled background and moreover the Posting date field in the variant is empty, so it normally takes GR posting in to account.
But our client requires that GI posting date should be the entry date (i.e 23.11.2007) though it is run in background.
The present scenario if you look at the material document
Document date 21.11.2007
posting date 21.11.2007
Entry date 23.11.2007
Can it be possible with any function module that the Document date, Posting date, Entry date are same (i.e 23.11.2007).
We want as fallows (without putting posting date field in MF70)
Document date 23.11.2007
posting date 23.11.2007
Entry date 23.11.2007
Thanks,
Kumar -
Hi,
What is the diff between REM profile 0001- W/o activity backflush & 0002 - with activity backflush. Is it activity backflush is necessary?
Regards,
Dharmahi Dharma,
the only difference between the
>Final backflsh w/o activities profile 0001 &
>Final backflsh w activities profile 0002
is that in profile 0001 u cannot post the activities to the product cost collector while in profile 0002 u can when u backflush.
the activities which are posted in the to the collector can be done based on
>standard cost estimate
>preliminary cost estimate
standard costing is done usually at the start of the year and is not changed while preliminary costing calculates the costs for the production process which can be for a particular production version or for a combination of BOM or Routing.
so choosing between these two profiles depends on how u want the capture the cost while backflushing.
hope this gives the required info
regards, -
Issue with Agent Profile from AM 70 OpenSSO interesting issue
Hi All,
I have a specific scenario and if it is not possible then ugrade from AM 7.0 to OpenSSO cant be true.
I have issue with the agent profiles (BTW I am not doing upgrade from AM 7.0 to OpenSSO but its a fresh OpenSSO install)
In AM 7.0 Agent profile is like this (below is the exact export from the AM 7.0)
dn: uid=Test-Agent,ou=agents,o=am
sunIdentityServerDeviceStatus: Active
uid: Test-Agent
objectClass: sunIdentityServerDevice
objectClass: iplanet-am-user-service
objectClass: top
objectClass: iPlanetPreferences
sunIdentityServerDeviceType: Agent
cn: default
sunIdentityServerDeviceVersion: 2.2
userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
Below is exact import into the OpenSSO (I created this LDIF using my script)
dn: ou=Test-Agent,ou=default,ou=OrganizationConfig,ou=1.0,ou=AgentService,ou=services,o=am
ou: Test-Agent
sunsmspriority: 0
sunserviceID: 2.2_Agent
sunKeyValue: sunIdentityServerDeviceStatus=Active
sunKeyValue: sunIdentityServerDeviceKeyValue=
sunKeyValue: description=
objectClass: sunServiceComponent
objectClass: top
sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==
Now you can see the issue in AM 7.0 the password is stored as "userPassword: {SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" where by directory server userpassword is SSHA encrypted VS in opensso it is "sunKeyValue: userpassword={SSHA}1w9aOfz1D4bypX292YT2oObVee34BWkgSB3IXQ==" which OpenSSO doesnt like .. :)
If i create a Agent from the opensso Console then Agent create a password using AES encryption and and that works fine even when I import my above LDIF and update the password using the OpenSSO console it also works. The issues I have this I dont know all of the Agent clear text password and I only have the LDIF to work with. Any thought !! Please let me know I am stating to believe that the upgrade from AM 7.0 to OepnSSO will have the same issue which i have not tried yet.
Anythoughts or ideas are very welcome !
-HarisConfiguring the agent like this, ie importing a ldif file is not supported and can lead to unexpected results as you have observed. Just do it in a supported way and change the password for the agent if you don't know it. As the administrator you are supposed to know the password or have the power to reset it.
Maybe you are looking for
-
Why can I no longer sort songs by popularity?
Why can I no longer sort songs by popularity?
-
BADI for Disabling NetPrice field in ME21N & ME22N based of Material Type.
Hi. I had a requirement to disable "net price" field while creating or changing a PO (ME21N & ME22N) based on the type of material entered. Please asssit me in finding the BADI or exit name which can meet my requirement. Thanks.
-
TestStand hang, Execution with Event-Callback-VI
Hello there, I try to build a UI in TestStand 3.1 and LabView 7.1. I don't want to use Application-, Execution and SequenceView- Manager because you must use the SequenceView-Control to display some Details of Execution.. While executing a Sequencefi
-
Hello, I have yellow spot on top right corner of Iphone screen, Spot gets denser as phone gets heat up. The phone is 1ys old and thus out of warranty. Any idea how to fix it.I have searched on net but all the issues were for brand new iphone and not
-
Find and delete duplicate fotos in iphotos 9.5
How do I find and delete duplicate fotos in iphotos 9.5