Issues in running crystal reports 2013 with SOQL as a datasource

Hi Experts,
We have some crystal reports created in CR 2008 with command as a data source and all the commands are written in SOQL pulling data from SFDC, now when I open and run those reports in crystal report designer 2013 it is giving below errors:
Failed to retrieve data from the database.
Details: 42S22:[Simba][SQLEngine] (31400) Qualified column could not be bound: c.Investor__r.Relationship_Formula__c. [Database Vendor Code: 31400 ]
Failed to retrieve data from the database.
Details: 42S22:[Simba][SQLEngine] (31400) Qualified column could not be bound: k.Account_Relationship__r.PE_Priority__c. [Database Vendor Code: 31400 ]
We are running crystal reports in both the version with system admin user who has access to all the objects in SFDC. It works well for CR 2008 but not for CR 2013, means relationship is not an issue.
We have done some analysis and found that if the field in query contains two periods (.) it is not recognising that field, if we remove that field from query, CR 2013 takes that as a valid statement.
Any help or suggestions on this issue would be a great help.
Regards,
Apoorv

Hi Apporv
Please check your database documentation for error 31400.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Similar Messages

How to configure crystal report 2013 with oracle 11g

hey all,
i download trial version SAP Crystal Report 2013 and i have Database with 11g and i want to connect with my database and try to develop reports
but my issue is that i'm not able to connect with database. Can anyone please help to connect with database.
i am new be with oracle database so it will help me if any one go thru step by step or any link,

Hi Sandip,
All you need is a 32-bit Oracle driver to be installed on the machine you're developing the reports on.
If you already have both the 64-bit and the 32-bit drivers, make sure the Path variable under 'system variables' points to the 32-bit home.
You can then either create an ODBC DSN or use the 'Oracle Server' native driver that shows under 'Database Expert' to create the report.
-Abhilash

Run crystal report 2008 with cmc event

it is possible to run the report only when i have some new record in a table ?
or a new file in the disk ?
i created one event in cmc but when i tried to schedule i don't have the option "with events"
any help ?
Thanks
Ricardo

Events can be based on a new file, and reports can be scheduled to wait for the event. However, you do need to use the "with events" scheduling option in order to do so. I don't know why you would not have that option (unless, maybe, if the event that you defined wasn't saved - i.e. no events - and/or you don't have an event server running).
One thing on events, though, is that they work in conjunction with the scheduled time of the report. The report has to pass the schedule time, THEN the event has to be triggered before the report will run. Once triggered, a new or recurring schedule must evoke the report again before it will start watching for the event. So, in other words, I don't believe that you can have a report triggered solely by an event.
HTH,
Carl

SAP Crystal Reports 2013 with App-V5 SP2 Hotfix4

Hello, ifIpaketiereSAPCrystal Reportsnot workingin theproduction environment.If the software iscapable of
App-V?

Hello,
Perhaps if you were a bit more elaborate on the details in your specific environment, we could assist?
Things that would be good to know;
1. Can you share a recipe for how it was packaged?
2. What is the production environment?
3. What issues are you experiencing, and how are those manifesting themselves?
Nicke Källén | The Knack| Twitter:
@Znackattack

SAP Crystal Report 2013 SP03 - Connection error with SAP ECC tables, clusters

Hi,
I'm trying to connect SAP Crystal Report 2013 with SAP ECC but I'm getting below error. I've read some where that We need to install SAP integration kit but SAP BI 4.1 it comes default, also had to install the ABAP cystal report transport - How to do Install this on SAP side -
and on the ECC side we had to develop Crystal Authorization - how to develop this?
Can someone screenshot of these steps and please suggest if something else can be done.

Hi Pawan,
Search for the error and you should see many threads for this issue.
Anyway, this is what I found:
logon failed. you do not have the necessary rights to design reports
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
The wiki should have answers to all your questions regarding Transports, Authorization et al.
-Abhilash

SAP Crystal Report 2013 - Connection error with Universe

Hi,
I've trying to connect Crystal Report 2013 with Universe but I'm getting below error. Please can someone help how can I resolve this error.

.Unx Universes are Not supported by the legacy CR Designers (including CR 2013).
For that you have the new CR for Enterprise.
Does a WebI report against the same Universe work fine?
Do other universes (.unv only) work fine from CR 2013?
-Abhilash

Crystal Reports 2013 java-error "java.lang.ClassCastException: class com.crystaldecisions..." when promoting

Hi,
when promoting "Crystal Report 2013" report (with data connectivity BW MDX Query) from BO DEV to BO PROD with BO Promotion Mgmt (LCM), we get the following error message in LCM jobs history:
Resolution Status=Overwritten, Dependency Status=All the required dependencies are included.,
Commit Status=Commit attempted and failed.,
Promotion Status=Failure : Object promoted. Update failed.
Error: java.lang.ClassCastException: class com.crystaldecisions.sdk.occa.report.lib.ByteArray:java.net.URLClassLoader@1d634758 incompatible
with class com.crystaldecisions.sdk.occa.report.lib.PropertyBag:java.net.URLClassLoader@1d634758
The report itself is present on BO PROD, but the overwrite (BW DEV MDX Query-> BW PROD MDX Query) is not applied, so report connectivity still points to the BW Query on the development system :-( .
Moreover, the overwrite itself is detected when the job is "test promoted" ("active overwrite").
Before, we successfully were able to transport crystal reports 2013 with overwrite (the connection then pointed to BW PROD). No idea yet what suddenly changed that...
Any ideas what causes the error and what can fix it (no posts found, no SAP note, google also no hits)?
Best regards
Florian Pitschi

Update:
After more investigation, it looks as if the BO Server "CrystalReports2013ReportApplicationServer"
from time to time has an issue - not only when promoting, but also when viewing publications that contain Crystal Report documents or when executing them, the java class error or similar issue is thrown.
Did sb face similar behaviour and knows what is the root cause for "CrystalReports2013ReportApplicationServer" not working probably and throwing the java-class error? - it was running fine for several months, now, the class error showed up twice in one month.
We need to find out what is causing the issue (aleady checked tomcat and BO-logfiles...).
Best Regards
Florian

Crystal Reports 2013 Failed to find an Available Report Application Server.

Hi Experts,
I am unable to Publish Crystal Reports 2013 to the BI 4.1 SP2 Enterprise.
I have installed SAP CR 2013 on my Laptop and also on our Citrix machine, from both systems I am getting the following error when try to publish:
Failed to find an Available Report Application Server.
All the ports and firewall are open, when doing some trace with Wireshark, its assigning some random ports starting with 64960.
On the same machine, i have installed Crystal Reports 2008, I could publish reports to Enterprise.
Could you please let me know what might be the issue.
Is Crystal Reports 2013 need any specific port to be assigned?
Thanks,
Kris

Hello Experts,
In addition to assiging the ports for below servers,
     Crystal 2013 Report Application Server
     Crystal Processing Server
     Input File Repository Server
     Outout File Repository Server
I have configured the following setting also: Add Service Account that the
CMS runs under to the server's local admin group.
Still I am getitng the following error when trying to save the report to Enterprise:
" Failed to find an Available Report Application Server "
Please advise .
Thanks,
Kris

SAP tab in Crystal Reports 2013 issue

We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
"An error occurred while generating a new report templete.
No error"
Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue) and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
Thanks
GORO.

Hi Abhilash,
Thanks for your response.
Yes reports are working in CR 2013 designer.
Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
After exporting to pdf getting above errors...
-Srinivas

Sap Crystal Reports 2013 Performance Issues

Hi,
We are planing to do the report migration to sap crystal report 2013. now we have crystal report xi Developer licensed version and we download the 30 days evaluation(trial) version of sap crystal report 2013 only for testing. we have 1 report that created in crystal report xi version it runs within 5 mins for 2 lakhs records and same report we are testing on sap crystal report 2013 evaluation(trial) version with same connection and same report parameters it took 10 mins for 2 lakhs records.every report take more time in sap crystal report 2013 evaluation(trial) version as compared to crystal report xi Developer licensed version.
Why this happened? is it issue of evaluation(trial) version of sap crystal report 2013?
Kind Regards,
Ganesh

Hi Jamie,
what database are you using?
Oracle
what specific db version?
Oracle 11g
what connection method?
Oracle Server
Above same thing we r using for crystal report xi licensed version and sap crystal report 2013 evaluation(trial) version but now issues is that report takes 45 min in sap crystal report 2013 evaluation(trial) version for 2 lac records,but same report takes only 5 min to run in crystal report xi licensed version. is this issue of licensed bcoz now we are run report on sap crystal report 2013 evaluation(trial) version.

BW Connect To Crystal Report 2013 : issue

Hello Expert ,
i am trying to do Connectivity between BW to Crytal Report 2013 .
i Followed the Steps to conect with sap bw server .
SAP Toolbar -> Create New Report from Query .
And in Crystal Report 2013 , May be not Required by integrity tool kit due to its by default .
Can you please Help me to solve this issue :
Below i attached one Snapshot.
- Thank you.
~ Jatin Chauhan

Hi - have you installed the SAP Integration Kit, as mentioned here? http://scn.sap.com/community/bi-platform/businessobjects-bi-for-sap/blog/2008/02/19/businessobjects-and-sap-part-2
Separately, I recommend going with Crystal for Enterprise with BW; lately SAP has said to only use Crystal Reports 2013 if you need more functionality with SAP ERP than Crystal for Enterprise

Crystal Reports 2013 SP3 crashing

Hello,
We installed Crystal Reports 2013 SP3 to all developers and they have been noticing that Crystal is crashing.
It basically crashes on different scenarios and Crystal freezes and shows the error Crystal Stopped Working.
I have gathered different scenarios like:
1. Report was open, doing nothing when getting error crystal stopped working.
2. Report was open, re-titled a column, saved the file click on refresh button to re-run query with same parameters and got the same error
3. Open the report set parameters for the past month to run it and get error not responding.
We have re-installed Crystal on different computers and the same issue persist, even in Citrix we have noticed this as well.
Has anybody seen this behavior and found any solution for this?
Thanks,
Daniel

Hello,
I got new logs, but shows exactly the same as before. The same error lines
But It failed few minutes ago, around 3.10pm and as you see the log the error show at 1.45, so I'm not sure if it's related to database issue.
I'm checking the database logs and show the same error message coming from multiple desktops (which we believe are all the crystal developers, but this probably means that they sometimes use wrong password for that in their report...)
This is what happened this time:
Crystal 2013 SP3
This time it failed when developer was trying to update a command object, it stopped working
Crystal 2013 SP5
In 1 day it stopped working twice (when you have to close crystal completely), and stopped responding multiple times (screen grays our and shows the stop responding)
Thanks,
Daniel

Redistributable components of crystal report 11 and Crystal Report 2013

Currently we are facing a peculiar problem where we are having a report with 5 tables and connected using the default crystal report db connectivity.
The report was created in a very old version of crystal report 8.5 and we have been migrating the same to latest versions.
When i execute the report from my Application using crystal report 11 run-time components installed it works perfectly (5 Secs). In this we were using the viewer ole control embedded in our application.
But when the same report is opened up from the application using the crystal report 2013 run-time components there is performance lag of 15 Secs every time using the viewer as separate control using C# .net framework 4.0.
Also Installing crystal report 11 run-time and then installing crystal report 2013 run-time resolves the issue.
Can someone let me know if we are missing something.
Thanks & Regards,
Satish VS

Hi Bhushan
Thanks for your prompt reply
- The old application was it a .NET or COM SDK app?
Old application uses the COM SDK App ( CrystalRuntime.Application) developed in VB & consumed the same as an Ole object in Power builder.
- What version of VS are you using? (Earlier and now).
Earlier With Crystal report 11 we were directly deploying the viewer as ole control in our Powerbuilder application
Now we are using VS2010 with .net framework 4.0 as separate viewer control
- Is this a windows or a web application?
Its an windows application
- Provide the version no of CR 11 you used earlier?
Old Application uses crystal report 11.0.0.1282
- There are no runtimes for crystal report 2013, so could you please provide the version no for the crystal report 2013 runtimes you are using? You could check the file version of crystaldesicions.crystalreport.engine assembly.
Yes we are using crystaldecision run-time and the version is 13.0.2000.0 & Runtime version - v2.0.50727
- As runtimes, did you use MSM, MSi or ClickOnce CR runtimes do deploy your application?
We were using this CRRuntime_32bit_13_0.msi as a pre-requisite before deploying our application.
-Also, if you could elaborate on how did you upgrade / migrate the application and deployed it, would be helpful.
In my old application we would be using the default crystal report 11 merge module to be deployed alongwith our application msi.
To upgrade they would install the CRRuntime_32bit_13_0.msi and then deploy our application msi.
Please let me know if you need any further information.
Thanks in advance.
Regards,
Satish VS

Cannot load report from server in Crystal Reports 2013 Viewer

Hello,
I am having trouble opening a report that is hosted on a Crystal Reports Server (2013) from the Crystal Viewer. I've created and uploaded the reports using the report designer (version 2013). The reports have been uploaded using the "Save As -> Enterprise" to save to my enterprise server. This part works fine. I then navigated to the Crystal Reports Viewer to open my report (that I just uploaded w/ the designer) from the server. Depending on the report, one of two things happens:
1.) I get a loading bar at the bottom right of the screen that says "Operation in progress . . ." followed by an error message:
Unable to Refresh Report
A problem occurred while refreshing on the server. The report may not be configured properly for refresh.
Please contact your server administrator. (me)
2.) I get a loading bar at the bottom right of the screen that says "Refreshing <file name of the report> (<server name>)" followed by... nothing. The loading bar goes away and nothing happens. It goes back to the screen that shows when the application first loads (blank canvas).
I've taken some basic troubleshooting steps to try and rule out any potential issues that came to mind, but I've not been successful.
Any help would be appreciated, thanks!

Hi
Check the below thread
Crystal Reports 2013 data didn't refresh using OLE DB Provider for SQL Server
With Regards
Balaji Sampath

Unable to run Crystal Report due to error code called "database code:102

I have created a View on the SQL server and Now I am trying to run crystal report using that view. However, I get Database Vendor Code error message 102. Need your help, How can I ran a report using SQL veiws in Crystal?
thanks!
Mansoor

Hi,
The report is getting an error code 102 from the database driver.Try with searching the RDBMs type for error code 102, to narrow down the issue.
If data from database is failed to retrieve then,there are several causes of this error like disconnected tables, tables that are not connected properly.
Run your query in SQLcon32 and check that getting accurate output or not.
Regards,
Shweta

Issues in running crystal reports 2013 with SOQL as a datasource

Similar Messages

Maybe you are looking for