Issues in running scripts from OTM

Hi ,
I have created an endtoend scenario where the script starts from creating requistion, approval, PO creation approval , receipt creation then Invoice and payment.
My script failing with different reason for different runs. Mailnly its failing whenever the steps are referrred to Standard Oracle Forms.(Eg: Invoice Batch, Receipt Form etc).
I am running this from machine where Openscript and OTM is installed.
I tried the command line arugment like " -delayPercentage -1 -delayMin 1 -delayMax 20 " while running the script from OTM. Still issue is same. If I am not using this commad the script steps deviates and failing. I mean in script the step is to choose some responsibility A it is choosing B. To override think times recorded I have used thread.sleep(2000) after every thinktime entry to run it from openscript.
and to run it from OTM I am using above command.
Now can anyone suggest me is anyother way that we can overcome these timeout errors. Am I using command line argument in correct way ? Please help

Hi,
First try your playback from OpenScript.
Before play back go to View -> OpenScript Preferences -> PlayBack -> Oracle EBS/Forms Functional
Increase timeouts in Event Timeout. Also Increase timeout in Web Functional (Object timeout)
Then Apply and OK
Now try play back from OpenScript
Regards,
Deepu M
[email protected]

Similar Messages

Error when running script from OTM

Hi team,
Customer is trying to run script from OTM but is getting a "JWG file does not exist" error. I found the following metalink note and the customer has verified that the repositories are defined with exactly the same names & paths in OTM & Openscript.
Scripts Failing To Play Back From OATS Test Manager (OTM) (Doc ID 1587941.1)
I've also checked the following post in the forums but this doesn't apply to the customer because both the OTM & agent are on Windows:
https://forums.oracle.com/message/10707963
Appreciate any pointers
Thanks,
Krishna

Hi Krishna
Is the agent running as a windows service or started from an interactive batch?
What kind of script is that? Web, Forms, Siebel, other?
Are they different repositories or the same? If different, how do you copy scripts from one to the other one?
Cheers
JB

Cannot prevent ExtendScript debugging while running scripts from After Effects

Hi,
I am facing this issue while running scripts from within After Effects. Whenever I am trying to run a script in After Effects, the script opens up in ESTK in the debug mode. The execution waits at the starting point of the script as if there is breakpoint even though there is none. I am not sure whether what I am missing, whether some debug flag needs to be reset etc. I am using After Effects CC on Windows 7 OS. Any help would be highly appreciated.
Thanks.

I tried running the script after removing all $.writeln() statements, but unfortunately that does not resolve the problem. For testing the issue, I am trying with the simple script given below :
var window = new Window ("palette", "My Window", undefined);
var panel = window.add("panel", undefined, "Panel");
var text = panel.add("statictext", undefined, "Testing AE");
window.show();
But executing even this one from AE opens up ESTK. I am absolutely stuck with this odd behaviour .

Unable to run OpenScript Functional Scripts from OTM

Hi,
I am unable to run OpenScript Functional Scripts from OTM, but the same script is running successfully on OpenScript.
I have a script which has all my functions (say Script A) and I am calling these functions from a different script (Script B) and even this script (Script B) uses couple of Databanks.
Added both the scripts to OTM and when I run the script (Script B) which is calling the functions on OTM, I see the below error message.
Error Message: Child script with alias "Proceure_ To_Pay_Functions" not found. Add to the script "Proceure_To_Pay" a script asset with alias "Proceure_ To_Pay_Functions"
But the child script (Script A) with functions is added as a script asset in OpenScript to the calling script (Script B) and this script is running fine from OpenScript.
Can anyone please help me in resolving this issue.
Thanks,
Satya

Hi Deepu,
It worked and able to run the scripts developed in OpenScript from OTM. Thanks for your help!!
But I see another problem where when I try to run the script from OTM, I see a window Interactive Services Detection with a Message
"A program running on this computer is trying to display a message" "The Program might need information from you or your permission to complete a task." with Two Options
-> View The Message
-> Ask me Later
When I click on View the Message, I can see my application running by script but my desktop is not visible.
There is another window with Return to Desktop option, when I click on this I can see my Desktop.
Can I not see both my Desktop and application running on the same screen?
Please help!!
Thanks,
Satya

HT1222 hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package "mzps6175750011235388779.pkg"

hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
can you please advise me what should i do to fix this

Some ideas.
https://discussions.apple.com/message/20034600#20034600

Script Alert "You should only run scripts from a trusted source."

I created a small javascript which opens Photoshop and resizes some images.
I want to be able to double-click the .JSX file from Windows Explorer, and have Photoshop execute the script. Likewise, I want to be able to run the .JSX file from the command line.
The script runs perfectly. However, the problem is that I don't want any user interaction. I want to be able to run the script from the command line without the user having to click anything. What happens now when I try to run the file from Windows Explorer of the command line is, I get a Script Alert with the following text:
You are about to run a script in Adobe Photoshop CS3. You should only run scripts from a trusted source. Do you want to run the script? Yes/No
Is there any possible way to bypass this message or to answer in the affirmative?
Thanks,
Jamie L.

Hi... Sorry to revive such an old thread,
Does anyone know the "trusted source" folder for MAC CS4.
EDIT!
My bad. "The /users/<user_name>/documents/Adobe Scripts" folder is working for this purpose for me. I needed a path to it and forgot that the ~ resolves to the current user. Sweet.
-Bill

Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very much

Mucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

An error occurred while running scripts from the package "ztb343812063996219254.pkg

i tried to upgrade my os lion 10.7.5 to os x yosemite on my macbook pro and in the middele of downloading I'm getting this notice: an error occurred while running scripts from the package "ztb343812063996219254.pkg
help me please…..
i think i have problem with the app store cause sometimes I'm getting more errors like error no 13 or 100
what should i do?

An error occurred while running scripts from the package "mzm,stuhjljp.pkg".

I hope someone can help, I have now tried downloading Lion OSx 4 times and I keep getting this message: An error occurred while running scripts from the package "mzm,stuhjljp.pkg".
I go back to the app store and it kindly tells me it's installed. It's not quite simply it is nowhere to be found.
Nice one Apple for moving away from those reliable discs and causing pain, wasted productivity and a **** of a lot of frustration. $29.99 to annnoy the **** out of me, thanks.
Anyone have a solution that may be of assistance.

Mj, I can't offer much help but you may be able to use this method to "find" Lion OS X in the App Store again.
Hold down the "option" key while clicking on the App Store icon. Keep holding down the option key, then click on the "Purchased" tab at the top of the page.
With any luck the button to the right of Lion OS X will now say "install."
I'm having a similar problem reinstalling Lion, so don't be surprised if you try to reinstall and get the same error.
Good luck,
Contender

"An error occurred while running scripts from the package "DeveloperTools.pkg"

I'm trying install my xcode 4.2 and check log and this where there is problem
"An error occurred while running scripts from the package “DeveloperTools.pkg”

II found the answer elsewhere. I logged in from a diffent admin acount and the install went fine.

Agent showing error while executing script from OTM

Hi Team,
OTM is installed in a separate server(Windows 2008 R2).
When I am executing scripts in my client machine from OTM in server , I got the following error in agent....
17:22:17,192 INFO [Messenger] Try server=t3://10.50.48.29:8088 destination=oracle/oats/queue/AgentManagerStatusQueue
17:23:04,083 ERROR [Messenger] JNDI Error:
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://10.50.48.29:8088: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at oracle.oats.server.jndi.JndiLookup.createInitialContextInternal(Unknown Source)
     at oracle.oats.server.jndi.JndiLookup.createInitialContext(Unknown Source)
     at oracle.oats.empstart.Messenger.startConnection(Messenger.java:115)
     at oracle.oats.empstart.EmpStartMain.<init>(EmpStartMain.java:500)
     at oracle.oats.empstart.EmpStartMain.main(EmpStartMain.java:392)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:105)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.net.ConnectException: t3://10.50.48.29:8088: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
     ... 18 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     java.net.ConnectException: Connection timed out: connect; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
     at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
     at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:198)
     at oracle.oats.server.jndi.JndiLookup.createInitialContextInternal(Unknown Source)
     at oracle.oats.server.jndi.JndiLookup.createInitialContext(Unknown Source)
     at oracle.oats.empstart.Messenger.startConnection(Messenger.java:115)
     at oracle.oats.empstart.EmpStartMain.<init>(EmpStartMain.java:500)
     at oracle.oats.empstart.EmpStartMain.main(EmpStartMain.java:392)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:106)
     ... 1 more
Actually my server IP is *10.50.6.38*, then why agent is trying to connect *10.50.48.29* with port 8088. If I restart my machine it works for 4 - 5 scripts again shows the same error in agentmanager.
Please help me to resolve this issue........
Regards,
Deepu M

anybody have comments on this????????????

Not able to playback siebel open ui functional scripts from OTM

Hi All,
I have recorded a Siebel Open UI functional script using web wizard of OpenScript.It contains navigating url,typing username and password,clicking enter button.
When I tried to playback from OpenScript,it works fine.But when I tried to execute from OTM,broser is launched and navigated to the url,then it failed.
I am getting "Failed to playback: No browser launched" error from OTM report.
OATS Version : 12.4.0.2 Build 129
IE Version : 9.0.8112.16421
I have found one more strange thing,after playing back from openscript,if the Siebel Open UI login page exists in the browser,then OTM is able to playback with the scripts,it is logging in to the application.
Can anyone help me to fix this issue?
Thanks,
Sandy.

Informatica Domain File path D:\Informatica\9.1.0 - domains.infa
Informatica Power Center Path D:\Informatica\9.1.0\server
Yes, I m able to connect to the Informatica repository through the Informatica client.
I tried adding the windows machine name to the hosts file, but didn't help.
veeravalli - I've followed all the instructions in the document. I rechecked all the details corresponding to the host, domain and port number and they are correct.
Thanks!

Loading script "script path-name" failed (0xC0000006) error when running scripts from DFS

We have this issue where any number of random scripts that execute at startup will produce the following error when run from DFS:
The status code for this error equates to STATUS_IN_PAGE_ERROR - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
This does not always happen each time and the script can be random. If we move the script(s) to a non DFS, we do not see this. I believe the issue is being caused by a minute disconnect to the DFS for whatever script is attempting to execute at that
moment. This happens across a few (consistent) offices on different computers.
Any ideas?

Hi,
According to your description, my understanding is that you run scripts in a shared folder which is added to a DFS Namespace, then the error prompt. However, you can run the scripts when you directly access the shared folder.
What scripts did you run? Is there any error message in the Event Log? If so, please provide us the detailed error message for our further research.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ScriptUI run script from dialog button

Here is what I have right now. It is a little clunky in the way it works, and I would just like to make it a bit slicker.
I have a script on startup that creates a Menu item with a dropdown submenu item. when you click on the submenu item, it starts a script.
The first thing the script does is pop up a message box that tells them that two dialog boxes are going to popup. The first one asking them to choose the location of an xml file and the second dialog box that ask them to choose the location of their image folder. After they finish choosing their folder in the second dialog, the script takes those two values, makes them variables, and continues to run the rest of the script.
Here is what I would like it to do..
1. open a dialog window with two input fields, two "browse" buttons, and OK and CANCEL buttons
2. when you click the first browse button next to the first input field, it will open a file dialog window. You select your file and the file string will populate the input field
3. when you click the second button next to the second input field, it opens a folder dialog window. You select the folder and the string populates the second input field.
4. when you click OK, it feeds the values in the input fields to a script.
I already have scripts to that open the file and folder dialogs, but what I can't figure out how to do is to start and run a script from a button press, in this case, when the OK button is pressed. It is probably an onClick, but I haven't been able to find any examples of what the syntax would be.
The closest I have found is in the Beginning ScriptUI document that was on Jongware's site, in the section on Communication between windows. But that opens each of the windows with a different script and not using a button press to call a script.
As always, any point in the right direction is very much appreciated. thanks.

Thanks Gotterman, but the issue I was having was that the dialogs I was opening were not being created by me. They were more like OS generated windows. So I am not able to give the window a name, or the input field a name in order to reference it.
Peters response was actually correct, although I did have to open the folder dialog a bit differently to get it to work. I had to use a style that I got from Jongware in a previous thread, but the concept that Peter showed in the last post pointed me in the right direction.
I just have one more piece to figure out, how I am going to pass the variables to another script, but I think that is something i will have to work out on my own.
For anyone who is curious, here is the code I came up, modifying and combining some of Peters examples from the book plus the help he gave me in this thread. The alert after closing the dialog is just for testing to show that the values are being held by the variables so I can use them else where.
function mySnippet(){
//<fragment>
#target indesign;
#targetengine "session";
var w2 = new Window("palette", "Window 2", undefined, {resizeable: true});
var e2 = w2.add ("edittext"); e2.characters = 30;
var e3 = w2.add ("edittext"); e3.characters = 30;
var f2 = w2.add ("button", undefined,"Browse XML");
var f3 = w2.add ("button", undefined,"Browse Folder");
var f4 = w2.add ("button",undefined,"SAVE AND RUN");
var tf
var tfo
f2.onClick = function()                {
tf = File.openDialog("Select your XML File","*.xml");
if (tf != null)
e2.text = tf;
f3.onClick = function()                {
var tfol = new Folder("~/My Documents")
tfo = tfol.selectDlg("Get Folder");
if (tfo != null)
e3.text = tfo;
f4.onClick = function()
w2.close();
alert ("xml value: " + tf + "\nfolder value: " + tfo);
w2.show();
//</fragment>

Running scripts from the catalog

If you run a backup script from the catalog and you lose your connection, does the script continue to run (like if it were run with nohup) or does it fail?

When we connect to RMAN we use TARGET parameter to connect to the oracle instance and if that instance is on some other machine then we use TNS to make the remote connection, its as same as making a connection to the database using sqlplus where RMAN/SQLPLUS is a client program and a corresponding server process get spawned at the server end. After that we allocate channels which are the actual streams where data flows and maintained by the server process and if you kill the client program the corresponding server process will also die, it doesn't matter whether that client is RMAN or sqlplus and you know what it means.
Daljit Singh.

Issues in running scripts from OTM

Similar Messages

Maybe you are looking for