Issues in setting up demo data for MapViewer 10.1.3.1

Hi,
I downloaded the MapViewer Quick Start Kit from
http://www.oracle.com/technology/software/products/mapviewer/index.html
I also downloaded the Demo Data set.
I started the OC4J instance and able to view the MapViewer admin page.
I created the mvdemo user as per the script given below in readme.txt
grant connect, resource, create view to mvdemo identified by mvdemo;
When I tried to run the other scripts from the Demo Data set as per the readme.txt, I found that few of the tables/view were not existing. Few of them are
terr_counties
TERRITORIES
CITIES
INTERSTATES
COUNTIES
STATES
I am not sure whether I need to run someother scripts before running this one. I am using Oracle 10 g Enterprise Edition.
It would be helpful if someone could guide me on missing scripts if any
Thanks and Regards,
James

Hi James,
it seems that the tables were not imported. After you grant privileges to the user, you need to import the tables. Verify if you have executed this command:
imp mvdemo/mvdemo file=mvdemo.dmp full=y ignore=y
Joao

Similar Messages

How to programmatically set formatted javascript dates for validation?

How does one programmatically set formatted javascript dates for validation?
"12/31/2011" does not seem to work?

ourDate.rawValue = "2011-12-31"; // works
NOTE: if you have a hierarchy issue you may need something like
root.body.table.detail.ourDate.rawValue = "2011-12-31";

Issue in setting custom identity service for soa 11.1.1.4

Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
Bala

Hi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks

Why can't I set a relative date for a recurring event in calendar on my ipod touch?

why can't I set a relative date for a recurring event in calendar on my ipod touch?

Because The Calendar app does not support it. There are apps in the App store that do.

How can I set an validity date for a given vendor?

Hello,
we are currently trying to set a "validity date" for vendors.
Basically, our vendors need to be audited, and are "accepted" for a period of time, beyond which we'd need to re-audit them.
What we'd like the system to do is block use of the vendor if this date was exceeded.
Anyone has an idea on the way to achieve this?
PS: We know that there is a way to do this at the material level, we instead wish to manage it centrally for the vendor
Tx

Hello Nisha,
before doing business with a new vendor for services, our QA group needs to go thru a serie of verifications. We check various things such as insurance, certification,...
Once "approved", the vendor can be utilised by the plant for a certain period of time, after which a "re-audit" is necessary.
What I'd like to implement is a field where the QA group would enter this date, after which the vendor would be automatically blocked for usage.
This would then trigger the "re-audit" followed by the release from QA (who'd re-modify the date with the new one), and so on.
The vendor is not necessarily used for supply chain. Sometimes, it could be for services , maintenance, or other.
Tx for the ideas.

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow
I need to set it today because there are tasks that is needed to be completed on the same day.
Is there a way without modifying the page/form. like a configuration or something?
----------------------- Sharepoint Newbie

Hi ,
As Ajeet said, for implement your requirement, you can change the data validation on the Due data field.
You can do as the following :
Open the site with SharePoint Designer 2010
Click on Workflows on the left launch, then find ‘Approval-SharePoint 2010’, click on it
On the Forms section, click ‘ReviewApproval_***.xsn’
Then you can find Due Data for All Tasks, and change the validation
In addition, if you create an approval workflow with SharePoint Designer, you can use a specific date, it contains hour and minute.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Is it possible to set an opening date for a password protected file

Is it possible to set an opening date for a password protected file!
I want to lock a folder and then have it open on a perticular date not just open with a password so that i am not tempted to open it. Is it possible?

Yes. Go to the Settings app, and select safari. There will be a section called "Autofill", and you can enable it to save your passwords and auto-fill your personal information taken from the address book. Also, iOS automatically saves all Wi-Fi passwords, so there is no need to save it manually yourself.

Release date for Mapviewer 11g?

Anyone have a release date for Mapviewer 11g?

MapViewer is a feature of the Oracle Application Server. So it'll be available when the App Server 11g is available.

How to set a default date for a custom field of Date type in project server 2010.

hi,
can somebody help me.
How Can i set the default date for a custom field of date type in project server 2010 ?

Dear Rohan,
You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
Regards,
Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

Please recommend any app to set up heath data for iPhone 6+

please recommend any app to set up heath data for iPhone 6+

See "Interactive Notifications ..." here:
http://www.apple.com/ios/whats-new/design/

Issue with SAP demo data for SCPM content in BI system

Dear Expert,
"1558947 - SCPM 2.0: Loading Demo Data into SCPM"
Based on above SAP Note 1558947, we are performing the Demo data loads for SCPM data targets in SAP BI system.
However, the data is not available for any Data targets due to the reason, upload is sucessful but "Validation" is fialed.
Does any one has experienced similar situations. Please help to resolve this issue.
Thanks,
Khader

Hi Phani,
we are trying to follow above link and performing accordingly.
Please find the following steps we performed
1. we made sure that the DSO (Reporting UOM- 0SPM_DS32) and Process chain (DM: Reporting UOM (0SPM_REP_UOM) are Installed and active (as per the SAP Note 1540655) in BW system
2. Triggered the upload from front end
3. when we check the job log in BW system, the system triggers a separete process chain 0ASA_P044, insted of UOM process chain 0SPM_REP_UOM hence the load is not sucessful to the data target
4. Below is the job log for the above run
Job started
Step 001 started (program RSPROCESS, variant &0000000000136, user ID BWREMOTE_CRH)
Start process TRIGGER 0ASA_P044_VSTART in run F0KTSA5KR590X4TUQ4G7ILGD0 of chain 0ASA_P044
Event RSPROCESS with parameter BYLPP950MSCT56CM5C4QNL0N1 successfully triggered
Job finished
Could you please guide how we should proceed and correct this error.
Thanks,
khader

Issue with setting an Action Listener for a Command Button

Hi all,
I'm trying to set an action listener for a CoreCommanButton in a backing bean. Here's my code:
     CoreCommandButton editBtn = new CoreCommandButton();
          MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMethodBinding("#{backBean.doButtonAct}",null);
          editBtn.setActionListener(mb);
//Action listener method
     public void doButtonAct(ActionEvent actionEvent)
I keep getting a javax.faces.el.MethodNotFoundException error. However when I remove the ActionEvent parameter in doButtonAct(), I get a wrong number of arguments error.
So i'm guessing there is something wrong with the parameters i accept in my action listener method. what can be causing this issue?
Cheers.

I figured this out.
Since doButtonAct() requires an ActionEvent object as a parameter, i needed to define the parameter type when I create the method binding.
Solution:
     Class argsString[] = new Class[] { ActionEvent.class };
          MethodBinding mb = FacesContext.getCurrentInstance().getApplication().createMethodBinding("#{backBean.doButtonAct}",argsString);

How to set the Expiration Date for a task which is been assigned explictly.

Hi,
When I assign a task to myself and not work on it for couple of weeks the task is getting released automatically into the original unassigned pool. The TaskActionHandler WSDL is causing that to happen. I don't want a task to be automatically released into the pool when I don't work on it for couple of weeks, how can I make that happen? TaskActionHandler is something which comes with the BPEL so I can't change the way how it behaves. Do I need to set the expiration date or duration explicitly when a task is created?then how do I do that?
If anybody could let me know how to make TaskActionHandler not to release a dehydrated task, I would be glad.
Thanks,
Mythili.

Hi,
Make AUTO RELEASE a restricted action for the task by adding the following line:
<restrictedAction>AUTO RELEASE</restrictedAction>
to the <restrictedActions> tag in the task configuration file.
Works effectively.
Alternatively, you can specifiy the auto release durations on a per task priority basis. There is more on that in the BPEL Dev Guide.
Hth, Sjoerd

BIP & trying to auto-set the current date for a parameter

I'm trying to allow for a date selector as a parameter for one of my reports. This is BIP 11.1.1.5.
I've set up a field for the parameter and can pass it into the report but want to see if I can auto-fill this field with today's date, and then set the Date From to today and the Date To to 3 days from now. Is this possible? Is there a way to do something like "format-date:sysdate('MM/dd/YYYY');" in these fields? I've attached an image of my fields in my Data Model.
My image - http://goo.gl/mcXS7
Thanks.
Edited by: thejame on Jun 7, 2011 9:38 AM

Thank You! I came across this before but never saw you have to use the {$ to get to the value.
{$SYSDATE()$} gets me today's date.
So can I use these in the BIP's Query Builder or other areas where I want to populate fields?
Example: I want to use it in the actual report's parameters but it just comes across as "{$SYSDATE()$}"

Issues in setting up demo data for MapViewer 10.1.3.1

Similar Messages

Maybe you are looking for