Issues in upgrading ipad 2 from 4.33 to 8.02

Hi,
Itunes : Latest version (12.0.1.26) on Windows 7
I am trying upgrade using iTunes.   When I sync, the ipad gets stuck in the "Connect with itunes Logo" mode. This can be recovered using tools like IReb or tinyumbrella .
What I am seeing is that this process is completely reproducible:
(1) Try to do Upgrade
   (2) Ipad 2 stuck at "Connect itunes screen"
   (3) Use iReb to recover Ipad 2
The error I am getting is 4000 series.
Is it possible for my current ipad 2 version (4.33) to get directly upgraded to 8.02?
Should I upgrade to some intermediate version to complete the upgrade?
Thanks,

It's not possible to update iOS to an intermediate version (between what's currently on the device and the most current version, which is iOS 8.1). Earlier versions of iOS, even though your device can run them are no longer signed or validated by Apple for your device and the update will fail. The iPad 2nd gen can run the most current iOS 8.1 so that is what will be installed (assuming no errors) automatically by updating via iTunes. You cannot update via the device itself because this requires the device already be at iOS 5.x
Maybe your issue is that you are trying to update to iOS 8.0.2 but that version is no longer being signed (as far as I'm aware). Are you updating by manually choosing the iOS 8.0.2 update .ipsw file? If so, you may want to find the iOS 8.1 .ipsw file for your particular device and use that instead...or simply let iTunes find the correct update for your device (don't manually use the .ipsw file update method).
See the following article:
http://recomhub.com/blog/fix-error-4000-4005-4013-4014-4016-on-itunes-ios7/
From the article above:
"The hardware error generally relates to a cable that doesn’t work correctly, a port that is broken or even some dust and debris in between the connection. You would notice this when you first connect your iPhone or iPad to the computer to see if it was recognized. The best way to fix iTunes error 4013/4014 during an iOS 7 upgrade is to change the USB cable or USB port on computer. If that doesn’t work try updating to the newest iTunes available."
or Google "ipad error 4000" for plenty of other info.

Similar Messages

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

Tried to upgrading ipad 1 from itunes and l guess it did not complete because all I have showing on the ipad is the itunes logo with the usb cable. when l try to connect it to my system, it resquest that a driver be used to install the device. Pls help

Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?

Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

Issues after upgrading the Obiee from 10g to 11g

Hi all,
We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
Thank you,
Chris.

Check this pdf file
http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
If helps pls mark

Performance Issues during Upgrade of EBS from 11.5.10.2 to 12.1.1

Hi,
We're upgrading our EBS , from Rel 11.5.10.2 to 12.1.1.
We're stuck , while running script ar120bnk.sql (ran more than 20 Hours) :
Regarding the tables involved in this Process :
select owner , table_name,num_rows,last_analyzed,sample_size
from dba_tables
where table_name in
'RA_CUSTOMER_TRX_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_UPGRADE_DATES',
'AR_SYSTEM_PARAMETERS_ALL',
'RA_CUST_TRX_TYPES_ALL',
'RA_CUST_TRX_LINE_GL_DIST_ALL',
'XLA_TRANSACTION_ENTITIES_UPG')
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56 5554074
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12 38051383
AR RA_CUST_TRX_TYPES_ALL 90 04/02/2012 14:04:54 90
AR AR_SYSTEM_PARAMETERS_ALL 6 04/02/2012 12:19:49 6
XLA XLA_UPGRADE_DATES 4 05/02/2012 17:12:57 4
As you can see: RA_CUST_TRX_LINE_GL_DIST_ALL is more tan 380 million rows !
and RA_CUSTOMER_TRX_ALL is more than 55 million rows.
We have more huge tables in the AR schema , and we would like to know if we are unique customer
with huge AR schema objects , and if NOT how come that we are getting stuck on threed statment in
AR schema.
Bellow an output of all the objects that have more than 10 million rows in AR schema :
select owner , table_name,to_char(num_rows,'999,999,999') ,last_analyzed
from dba_tables
where owner = 'AR'
and num_rows > 10000000
order by num_rows desc nulls last
AR AR_DISTRIBUTIONS_ALL 408,567,520 04/02/2012 11:49:57
AR RA_CUST_TRX_LINE_GL_DIST_ALL 380,513,830 04/02/2012 13:54:12
AR MLOG$_AR_CASH_RECEIPTS_ALL 310,777,690 04/02/2012 12:30:33
AR RA_CUSTOMER_TRX_LINES_ALL 260,211,090 04/02/2012 13:30:26
AR AR_RECEIVABLE_APPLICATIONS_ALL 166,834,930 04/02/2012 12:16:54
AR MLOG$_RA_CUSTOMER_TRX_ALL 150,962,980 04/02/2012 12:33:23
AR AR_CASH_RECEIPT_HISTORY_ALL 145,737,410 04/02/2012 11:40:31
AR RA_CUST_TRX_LINE_SALESREPS_ALL 130,287,580 04/02/2012 14:03:54
AR AR_PAYMENT_SCHEDULES_ALL 108,652,480 04/02/2012 12:05:32
AR RA_CUSTOMER_TRX_ALL 55,540,740 04/02/2012 12:41:56
AR AR_CASH_RECEIPTS_ALL 53,182,340 04/02/2012 11:29:53
AR AR_DOC_SEQUENCE_AUDIT 52,865,150 04/02/2012 11:52:46
AR RA_MC_TRX_LINE_GL_DIST 17,317,730 04/02/2012 14:05:18
AR AR_MC_DISTRIBUTIONS_ALL 13,037,030 04/02/2012 11:53:35
AR AR_MC_RECEIVABLE_APPS 12,672,050 04/02/2012 11:53:57
AR AR_TRX_SUMMARY 12,457,560 04/02/2012 12:20:16
AR RA_CUST_RECEIPT_METHODS 11,105,750 04/02/2012 13:35:38
AR HZ_ORGANIZATION_PROFILES 10,271,640 04/02/2012 12:24:44
How to Upgrade AR tables whith Huge amount of Datas ( > 50 Millions Rows ) ?

Hi,
Dont worry, you are not the only one even we have one customer whose AR_DISTRIBUTIONS_ALL table is 80 GB now and i can even do select count(*) for this table.
We had to keep this much data for business requirements, but i wonder if this is a bug or users mistake.
Due to this we are facing seruios performance issues for AR reports and raised SRs but no resolution yet. And this guy who is assigned to us is reall ynot been helpful to fix the issue.
Although we did not upgrade for this customer, but we migrated from 11.5.9 to R12.1.1 by re-implementation. But all these increasing size of these tables happened after migration.
And i believe most of the time in your upgrade is going to building the indexes. You can ask Oracle if they can edit the driver file to skip building the indxes and rebuild them after upgrade. But again it will also take time.
Another option for you is to "Archive and Purge the data" as per chapter 10 of
11i Receivables user guide.
http://docs.oracle.com/cd/B25284_01/current/acrobat/115arug.zip
Thanks
Edited by: EBSDBA on Feb 8, 2012 10:04 PM

Has anyone upgraded iPad 2 from iOS 4. to iOS 7?

I need to update iPad 2 from iOS 4.3.4 to iOS 7. Has anyone done this and what problems occurred?

I don't think that the distance from 4.3.4 to 7 is going to be your issue. Remember that the iPad 2 is the oldest device supported by iOS 7, so it may be slow in places.
I don't think I've seen many issues, but you can search here by typing "iPad 2 iOS 7" and see if there's any watchouts.

LDAP issue after upgrading to SP15 from SP7 for CUP 5.3

Hello,
We have recently upgraded our Sandbox from SP 7 to SP15 on GRC 5.3 and Now having issues authenticating users using LDAP.
The connections and settings are exactly same as our Dev system which in on SP7 and the connection also says successful but when we go onto the request page and type in an id it says invalid credentials.
Am i missing something or is there a special procedure after upgrade .
Thanks
Uday

Hello Frank,
Thanks for the reply.I forgot to do it and as you said once i performed those steps it actually solved my password reset link issues as it was erroring out with 500 error and now it is working fine .
But to fix LDAP issue SAP has a note which says after SP13 we don't need to fill in the user path field while creating LDAP connector.
Thanks
Uday

SCOM : Issues while upgrading SCOM agent from 2012SP1 to R2

Hi,
We have upgraded SCOM setup from SP1 to R2 but facing issues with agent upgrade.
We were able to view only ~70% agents in pending management (Agent requires update).
Further, when I tried to upgrade agents through console, some are successfully upgraded but rest are giving
error.
Can someone help me to understand why all agents are not appearing in pending management for upgrade?
I also tried to upgrade agent manually but no luck. It gives error "The path 'C:\Windows\.........\monagent.msi'
can not be found. Verify that you have access to location and try again or try to find installation package.........". , though I had logged into server with admin access.
Also most of servers are remotely manageable but unable to upgrade through console.
Thanks,
Priya

Hi Priya,
I understand you require the Agent data. How ever the events clearely say the issue is because of the old installation files.
I was looking a a article on updating an agent to SCOM 2012 R2 from the below link.
https://technet.microsoft.com/en-us/library/dn249715.aspx
So the link says:
When you upgrade an agent, the Operations Manager installer service runs and is not removed until after the completion of the upgrade.
If the agent upgrade fails, you might have to re-install the agent because the installer service was not properly removed. If you attempt to upgrade the agent again and it fails, you should re-install the agent after you have completed upgrading all features
of Operations Manager.
So i would suggest you is you try the below on only 1 agent.
1. Download the Agent Dump from the below link and try updating it. (This is my copy of MOM Agent.msi from my installation media of SCOM
2012 R2)
https://www.dropbox.com/s/wv7y37moyd04209/MOMAgent.msi?dl=0
If the above does not success and gives you the same error then try the below
1. Select an agent and pull all the perfmon data / Alerting data required for it using SQL Query or Reporting.
2. Uninstall the Old SP1 Agent setup.
3. Install the Agent via Discovery Wizard or do a manual installation and see if the issue resolves.
I think either from both the steps will solve the issue.
Gautam.75801

Any known issues on upgrading SAP Netweaver from 7.0 EHP1 SP5 to SP6

Hi All,
Please let me know the implications after upgrading our portal from 7.0 SP19 to SP21 and also Netweaver ABAP stack from BW 7.0 EHP1 SP 5 to 7.0 EHP1 SP6.
Thanks & Regards,
Sowmya
Edited by: Sowmya B on Apr 15, 2010 2:27 PM
Edited by: Sowmya B on Apr 16, 2010 6:44 AM

Hi Experts,
We're in the process of upgrading SAP NW 7.0 EhP1 SP3 to SP10 using Enterprise Portal. I download the all the patches MOPZ via in Solution Manager System. NW 7.0 EhP1 SP10 Related patches successfully downloaded. But i didnt get
Enterprise Portal related patches for Example.
sap.com/CAF-KM.SCA
sap.com/EP-PSERV.SCA
sap.com/EP-WDC.SCA
sap.com/EPBC.SCA
sap.com/EPBC2.SCA
sap.com/KMC-BC.SCA
sap.com/KMC-CM.SCA
sap.com/KMC-COLL.SCA
sap.com/LM-PORTAL.SCA
sap.com/NET-PDK.SCA
sap.com/RTC.SCA
sap.com/RTC-STREAM.SCA
sap.com/SAP-EU.SCA
sap.com/SAP_BUILDT.SCA
I serached through SMP, But I am getting NW 7.00 releated patches, But our current running pathes NW 7.0 EhP1 SP03 upgrade plan for SP10. Please How to download the Those Patches. Thanks for All.
Thanks,
Selva

Login "Loop" issue after upgrading to Leopard from Tiger-iBook G4

Hi Guys,
I've the same login "loop" issue as described in *Apple KB article #306965* only on an iBook G4, unfortunately the solution offered in the KB article does not help.
There is one slight variant being that the user desktop appears for a second or two after the blue screen following login before it returns (loops) to the login window. It happens on all (2) user accounts.
The interesting thing is it doesn't occur on either account when booting in 'safe mode'.
Apart from deleting these accounts and saving/transferring the data are there any other ideas, suggestions or solutions?
Regards,
BB

Did a clean install, cloned the HD with SuperDuper and then used Mig. Asst. to restore data back to the original HD. All now OK.
A & I was done in the initial upgrade from Tiger.
Cheers,
BB

Issues with upgrading Hyperion HFM from 11.1.2 to 11.1.2.1

Hi,
After the recent release of Hyperion 11.1.2.1, we upgraded our development environment to 11.1.2.1 from 11.1.2.
Installation and configuration was smooth straight forward [ We used the Maintenance upgrade while installing 11.1.2.1 ].
We migrated the application created from 11.1.2 to 11.1.2.1 using copy App. We saw following issues.
1. We are unable to run consolidation and we get following Error: “An unknown error has occurred in the HsvData2 object”
2. Every time when we login to HFM workspace and run reports we see database authentication window, we have to enter admin credentials for first time.
3. We are unable to load a Rule File in 11.1.2.1, which was loaded successfully in 11.1.2.
Any details on the above issues or on the upgrade from 11.1.2 to 11.1.2.1 would be of great help.
Thanks and Regards,
Bhargav

I am going to throw out the most unexciting reply ever, but .... the answer probably lies in the 11.1.2.1 readme.
V25453-01 From : https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=13638318
Consolidation
When running a consolidation, the following error may occur: “An unknown error has occurred in the HsvData2 object” with a description of: “Value violated the integrity constraints for a column or table” and the following problem: “Cannot insert duplicate key in object”. To resolve this error, delete invalid records.
I didn't look at the other issues; however, once again, I think the answers are most likely contained in the readmes.
Charles

Can I upgrade iPad 1 from ios5 to ios6

Have had my iPad 1 for some time now, I understand that I can upgrade from ios5 to ios 6, this is so confusing could do with some really basic instruction on how to do this.

Hi ..
The first generation iPad cannot be updated beyond iOS 5.1.1.

Upgrade ipad 4 from 6.1.3 to 7.1.2 is it possible now?

Hi, I just try to restore my ipad 4 to 7.1.2 from 6.1.3 with Shift+Click Restore. It shows error 3194. Here what I did after search google.
1. Upgrade iTunes
2. Change 3 Computers with windows 7 32bit, 7 64bit and 8.1 64bit using every USB port and different cable.
3. Using the Lightning Cable from iPhone 5
4. Remove apple link from hosts file. Restart and Not restart.
5. Reset all content on my Ipad
6. Enter DFU mode and repeat 2,3,4
Also, I never jailbreak this devices.
None of them work. It still shows error 3194 and I just remember about Apple close signing IOS 7.1.2 from people who want to downgrade from IOS 8. Is this apply to upgrading? I don't want IOS 8 since it take about 800MB more. I try to use TinyUmbella and it not works. It help me get out from recovery mode only.
Can someone tell me how to upgrade it to 7.1.2 or it is impossible now?
Thank you very much.
Best,
Jeng

Jeng28 wrote:
For Apple, it quites a shame that you did marketing too much. Now my 16GB will be only 10-11GB available
Be advised that we are all users trying to help each other out. Apple does not read or respond to these forums.

Upgrade Ipad (A1337) from ios5 to ios8 directly

hi team,
I have many I pads in my organization, need to be upgrade from ios 5 to ios 8 directly.
I have upgrade from ios 4 to ios 5 through iTunes. now when i not able to upgrade again, see screenshot below.

That iPad is a first generation model; it can't be updated past 5.1.1.
(119052)

Performance issues after upgrading iPad 1 to IOS 5..

Apps open slower, lag in response and even typing gets an intermittent lag..
I have 51GB free space out of 64.. So not a space issue.
Is it an IOS5 issue with the iPad1 or could they be an upgrade issue? My iTunes hung several time during the upgrade.. So I wonder about that.
Do I try to revert back to 4 or should I stick with IOS5 and try to erase my iPad then sync over again?

You can't revert back to iOS 4 officially - Apple does not support downgrades. You could try restoring your device or you could just try restarting it or resetting it if you haven't tried either of those things. I would try those things before I would restore.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
I have an original iPad and I updated and other that a little keyboard lag - which I always had anyway in every iOS that was on the device - I have had no performance issues.

Issues in upgrading ipad 2 from 4.33 to 8.02

Similar Messages

Maybe you are looking for