Issues installing 10g ODAC on Windows 2008 with Oracle 10g Express

I am new to Oracle and am having an issue installing Oracle Data Access Components on Oracle 10g 64bit running on Windows 2008 64bit.
I need the ODAC installed to enable integration with SSIS.
The issue I have if i install using ODAC10203x64 the setup file fails with a javaw error and the ntdll.dll.
I then downloaded the ODAC1110720 which states it backwards compatible. It installs just fine, but now i am not sure as to how to configure it correctly as the Configuration util that loads in ODAC10203x64 does not run.
The ODBC drivers are not visible under the ODBC connection manager although this may be an issue of just opening the 32Bit version.
Any help would be appreciated

Hi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM

Similar Messages

Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G

Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco Kolombesky

In the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco

Issues installing 11g client on windows 2008 R2

Hi I am a windows admin and have been asked to install oracle SQL developer and oracle 11g client on a windows 2008 R2 server.
However it will not work.
After having issues and having to manually set environment variables and creating the folder path network\admin for the ora files, we still get the following issue
"IO Error: The network adapter could not establish the connection"
We have tried both 64 and 32bit versions.
Any help here would be very much appreciated.
Paul.

Thanks for everyones response to this.
First issue was the server we were installing this on is not on the domain and doesnt point to our internal DNS. Hence it couldnt resolve the Host name in the tns file.
I added this to the hosts file, then we had to modify some of the registry entries and path manually.
We were then able to succesfully make a connection.
Paul.

Java gets error pki-02002 accessing wallet on windows 2008 with Oracle 12 only

I have a windows 2008 server with Oracle 12 client installed and I can't figure out what is preventing me from running java commands that use the wallet. The wallet itself seems to be fine as I can log in with SQLPLUS using the wallet, it is only when I try to run a java command that it fails with a PKI-02002 error.
Also - I can run the same command line without error with oracle 11 installed, so it seems to be something that differs between oracle 11 and 12. Any ideas of what I should look for? I've checked permissions on
Here is the error:
java.sql.SQLException: encountered a problem with the Secret Store. Check the wallet location for the presence of an open wallet (cwallet.sso) and ensure that this wallet contains the correct credentials using the mkstore utility: java.io.IOException: PKI-02002: Unable to open the wallet. Check password.
at oracle.jdbc.driver.PhysicalConnection.getSecretStoreCredentials(PhysicalConnection.java:3048)
Exiting program...

Hi,
I am having exactly the same problem. Did you ever come to a resolution on this problem???
Thanks,
Darren

Problem installing new Discoverer Catalog AS 10gR2 with Oracle 10g 10.1.0.4

Hello everybody, I'm having the following problems
I have successfully installed
1. Oracle 10g (10.1.0.4) with all appropriate patches (successfully up and running and works with Analytic Warehouse Manager 10g R1)
2. Oracle Application Server 10g R2 (10.1.0.2) (Infrastructure and Application Server mid tiers both successfully up and running)
3. Oracle Business Intelligence 10g (10.1.0.2)
(successfully up and running)
Whilst trying to install a discover catalog into my GLOBAL tablespace on Oracle10g 10.1.0.4 instance, I encountered the following error
500 Internal Server Error
java.lang.InterruptedException: sleep interrupted
at java.lang.Thread.sleep(Native Method)
atoracle.disco.oem.controller.DiscoEventHandler.handleEvent(DiscoEventHandler.java:104)
atoracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown
Source)
atoracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown
Source)
atoracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown
Source)
atoracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown
Source)
atoracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown
Source)
atoracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown
Source)
atoracle.cabo.servlet.UIXServlet.doGet(Unknown
Source)
atoracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:347)
atoracle.sysman.eml.app.Console.doGet(Console.java:271)
atavax.servlet.http.HttpServlet.service(HttpServlet.java:740)
atjavax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atcom.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:823)
atcom.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
atcom.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
atcom.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
atcom.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
atcom.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Thank you for your help

Hi Amer,
For OLAP access in 10g database you must apply the 10.1.0.4 patchset that can be downloaded from Metalink. This provides many new features for the OLAP option such as improved sparsity management and paritioned cubes to name a few of the new features.
Once you have this patchset installed you will then be able to use Discoverer to access your dimensions and cubes.
Hope this helps
Business Intelligence Product Management Team
Oracle Corporation

Connect linux 4 oracle 10g client to window 2003 server oracle 10g server

Hi,
I have my oracle 10g server installed on windows 2003 server.
On another system i have oracle 10g client is installed having RedHad enterprise edition 4.
I want to connect my client to the database server.
I check using oracle universal installer it shows in installed products i.e.
oracle 10g client is installed on linex system.
but when i try to write any command like
[oracle@satish ~]$ sqlplus$
bash: sqlplus$: command not found
[oracle@satish ~]$ tnsping
bash: tnsping: command not foundand it doen't show any enty in applications for oracle which is strange.
as i am new to linux.
how to overcome this problem.
Thanks
Umesh

thanks for quick reply
i work like
[oracle@satish ~]$ cd /home/oracle/oracle/product/10.2.0/client_1
[oracle@satish client_1]$ ./tnsping
bash: ./tnsping: No such file or directory
[oracle@satish client_1]$ ./sqlplus /nolog
bash: ./sqlplus: is a directory
[oracle@satish client_1]$ ls
assistants   has               jdbc     nls          oui       root.sh      wwg
bin          hs                jdk      odbc         owm       root.sh.old xdk
cdata        install           jlib     olap         perl      slax
cfgtoollogs install.platform jpub     OPatch       plsql     sqlj
classes      instantclient     jre      opmn         precomp   sqlplus
crs          inventory         ldap     oracore      racg      srvm
css          jar               lib      oraInst.loc rdbms     sysman
diagnostics javavm            network ord          relnotes uix
[oracle@satish client_1]$
and
[oracle@satish ~]$ expot ORACLE_HOME=/home/oracle/oracle
bash: expot: command not found
[oracle@satish ~]$ expoRt ORACLE_HOME=/home/oracle/oracle
bash: expoRt: command not found
[oracle@satish ~]$ export ORACLE_HOME=/home/oracle/oracle
[oracle@satish ~]$ export ORACLE_SID=neo
[oracle@satish ~]$ export PATH=$PATH:/home/oracle/oracle/product/10.2.0/client_1[oracle@satish ~]$
[oracle@satish ~]$ ./sqlplus /nolog
bash: ./sqlplus: No such file or directory
[oracle@satish ~]$ ./tnsping
bash: ./tnsping: No such file or directory
[oracle@satish ~]$thanks
Edited by: Umesh Sharma on Feb 20, 2009 6:33 AM

Install 46D EXT2 on Windows x64 and Oracle 10g

Hello,
When i try to install a SAP 4.6C system on Windows ORACLE 10.2.0.2 and Windows AMD_64 (x64).
I've got an error in the creation of the database (see below). The Centrale instance wae created successfully.
I've changed KERNEL CD to the 46DEXT2 (INSORA102_0.SAR) version and also applied OSS Note 976457 to update various Windows DLL .
The problem is when launching R3SETUP, it goes to subdirectory ZSAPORAICL like you can see.
Why ? Is there's an error on 46D Kernel CD ?
Do you have any idea ? Already had the same problem ?
Thanks for your help
Best regards
Gaël
INFO 2008-10-31 11:13:09
    Creating Database Instance
INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA SyCoprocessCreate:931
    Creating coprocess C:UsersproadmInstallZSAPORAICLBINORADIM
INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteDo:0
    DIM-00019: Message 19 not found; No message file for
    product=RDBMS, facility=ORADIM
    O/S-Error: (OS 1073) The specified service already exists.
INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteDo:0
    RC code form SyCoprocessWait = 19 .
ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteCheck:0
    Exit code from C:UsersproadmInstallZSAPORAICLBINORADIM: 19.
ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA InstallationDo:0
    Phase failed.
ERROR 2008-10-31 11:13:09 InstController Action:0
    Step DBCREATEINSTANCE_NT_ORA could not be performed.
ERROR 2008-10-31 11:13:09 Main
    Installation failed.
ERROR 2008-10-31 11:13:09 Main
    Installation aborted.

Hi.
You will get the detail installation of "Oracle Policy Manager" in the following link.....
http://www.oracle.com/technology/obe/obe10gdb/install/lsinstall/lsinstall.htm#t3
Regards
Shweta.
DBA
IBCS-PRIMAX Software(Bangladesh) Ltd.
[email protected]

Installing Oracle Application Server 10g 101202 on Windows 2008 64 bit

Hi All,
what i need to do is install this software like this:
installing Oracle Infrastructure to handel Sessions as db for oracle forms & reports
install Oracle Forms & Reports Service as Middle-Tire on the same machine in defirent home
configure my report server as i require it to work with rdf files in spechial folders
i have done this installation more than i can remember in Windows 2003 R2 SP2 32 bit
but for Windows Server 2008 i am facing some problem that there is no software avilable for 64 bit or Windows 2008 in Oracle Download Site
Spechilaly when my server is not itanum !
Can any one point me to the right download page if avilable or another solution for this problem
i don't think that oracle have stopped support for this product spechilaly when the reports generated by Oracle Report Service is far to good and fast with Oracle Database
Best Regards
Ibrahim

Hi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Oracle 10g installation on Windows 2008 VMware

Hi everybody,
hope you can help me with that issue; I try to install a ECC 6.0 test-system with Oracle 10g on a Windows 2008 VMware instance.
I am getting a strange error when executing sapserver.cmd when I try to install the Oracle software; the Oracle Universal Installer 10.2 is aborting at the very beginning with an error popup with following content. First I enter the Drive letter for installation and SID and then OUI trys to start...
The program was not closed properly. An internal error occured. Please provide Oracle support with following datas:
"unknown"
"unknown"
"unknown"
Any ideas? I did not find anything in Metalink or on the SAP Marketplace. And I am aware that Oracle is not official supported on VMWare; on Windows 2003 I did not occur any similar problems.
kind regards
Philipp

The OUI doesn´t work (yet) on Windows 2008, you will need to wait for the OUI 10.2.0.4.
Markus

Migration from SQL SERVER 2008 to Oracle 10g issues.

Hi ,
I'm trying to migrate from SQL Server 2008 to Oracle 10g and I end up with some issues that I wanted to ask some info about it.
First, I was following a tutorial
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
and and in the last version of Oracle SQL developer I downloaded, I didn't find the Load Database Capture Script Output option.
My first question is how can I either add this option or is there a new way to load the capture script ?
Then I use the migration wizard and after following everything, I had the migration complete message from the application.
When I tried to open my connectionss, it tells me version 11.2 is required. Does that mean that Oracle SQL developper 3 only
do the migration for oracle 11g? And if I tried the previous versions, it doesn't support SQL server 2008.
What do I do in this case ?
Thanks !

Thank you for your reply.
After using the wizard and made the offline migration script, in the Migration projects window I made a move data to the oracle connection I previously made and after when I tried to reopen the connection, I couldn't.
Well I didn't retry it yet to see if I'll have the same behavior but basically this is what I think I did. When I tried to open the connection I made, it says, Oracle 11.2 is required.
Now, I just generate target from the convert model and it says migration complete but how do I test it and I do I go to oracle and see change ?
Do I had to create a special user in SQL Server to log to it first ? How do I logon to it ?
Edited by: 873671 on Jul 20, 2011 7:03 AM
Edited by: 873671 on Jul 20, 2011 7:19 AM

Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

Hi All,
Has anyone been able to install DSEE 7 on Windows 2008 R2 SP1 64-bit? Is it supported?
I followed the instructions and when run the command (as the Administrator) below nothing happen, it simply return an empty command prompt. Ms VC 2008 Redistributables (the one that come with the archive) is installed.
dsccsetup.exe war-file-create
dsccsetp.exe ads-create
When run the same command using the same archive on Windows 7 64-bit it does prompt for further input or report error.
Any suggestions or help would be much appreciated.
Shane L

Windows 2008 R2 is not listed as a supported OS in the release notes.
http://docs.oracle.com/cd/E19424-01/820-4805/820-4805.pdf
It lists:
Microsoft Windows Server 2008 Standard Edition for x86 and x64 Service Pack 1
Microsoft Windows Server 2008 Enterprise Edition for x86 and x64 Service Pack 1
If you are able to go to the next version, it is listed as supported in the release notes for ODSEE 11g:
http://www.oracle.com/technetwork/middleware/downloads/odsee-11gr1certmatrix-161592.xls
I have not tried 11g on 2008 R2 myself, but if it is in the certification matrix, it should work.
Hope that helps,
Eric

2 nodes RAC with Oracle 10g on Windows 2000 server

Hi at all. I want to manage a cluster having 2 nodes on windows 2000 server each of them with Oracle 10g. I have VMWare 5.0. Someone can suggest me a detailed tutorial how to start and built it? Thank you very much for your answers.
Saverio Sergio Mola

the cookbooks here:
http://www.oracle.com/technology/tech/linux/vmware/cookbook/index.html
will explain how to install.. however the VMware Workstation product doesn't offer in a supportedway the sharing of two nodes of disks.. there are hacks out there, but they are not very stable. We therefor chose to install two instances on one node to showcase RAC, rather than make it complicated and unstable to use and showcase.
there are also ready made VM's from above page, so u can quickly evaluate it for both Red HAt and SuSE.. when vmware can support such sharing in an easy supported way we might re-evaluate.. until then my personal suggestion is to stick to simple case.. 2 instances on one node.. its easier to copy, snapshot.. etc.
Enjoy..
Saar.

Install Oracle 9i client on a computer with Oracle 10g Client

Hello all!!
I'm using a computer with Oracle 10g client, and I access two databases. One server has Oracle 10g server, and the other server has Oracle 9i server.
I want to install 9i client, to have it also in my computer. I haver read that I just have to install it in a different ORACLE_HOME, but I have a doubt.
If I install 9i client, would I be able to use the utilities, (exp, expddp, sqlldr) of both versions, or which version will be used in the command line for the utilities.
Thanks a lot!!!

To start with, Home Selector is a "9i thing" (and older), in 10g there's the OUI -> Installed Products... -> Environment tab instead.
About the 9i dbca with other Oracle products installed. If you use launch.exe to start via dbca start menu shortcut, it uses ora92\assistants\dbca as working directory ("start from"). So when not looking for "numbered dlls" like oracore9.dll, a later/different version will be loaded if earlier in path, since loading goes through jre directories, ora92\assistants\dbca, then the dir's from path variable. From there it may start to link in libraries from different homes (on my laptop, "launch.exe dbca" uses files from 2 additional home paths!)
But, if you instead use dbca.bat started from ora92\bin, it will look in the right directories first and there's no dll mess-up. (But only when using the correct cwd!)
Plain and simple: stay very far away from multiple-general-home installs. It is possible to install allright, in different homes and all very nicely, but there will be pain when you decide to use the stuff (perhaps with sql*plus as the only exception, but I've run into bugs with that too).
Message was edited by:
orafad

Relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express)

Hi,
I am facing a lot of relinking errors after installing 12.1.1 on XP with VC++ (VS2008 Express Edition).
I had followed Oracle E-Business Suite R12 Installation Steps on Windows XP (Oracle E-Business Suite R12 Installation Steps on Windows XP and for VS2008 have followed metalink note MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows [ID 1070674.1]
After applying the patch from section 1 9491976, there are a lot of relinking issues as follows:
=========================
Relinking module 'ADCONV.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/ADCONV.exe
Starting link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'ADCONV.exe' on Thu Apr 22 15:28:28 IST 2010
Relink of module "ADCONV.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'AFTBLGEN.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/AFTBLGEN.exe
Starting link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Done with link of fnd executable 'AFTBLGEN.exe' on Thu Apr 22 15:28:28 IST
2010
Relink of module "AFTBLGEN.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Relinking module 'APPR60UE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this APPR60UE.dll
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk
appr60ue.LIST
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_2360.mk:758:
*** target pattern contains no `%'. Stop.
Unable to get the objects for module "APPR60UE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
=========================================
Has anyone faced something similar in the past?
Regards,
Neeraj

Hi Helios,
That got resolved after I added the location of the dll in the PATH.
Now i m getting LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
The log looks like:
Relinking module 'fndcpesr.exe' in product fnd ...
gnumake -f
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
Starting link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2908:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:759:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/CMDCART.dll'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:2955:
warning: overriding commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
D:/oracle/LADPCDEV/apps/apps_st/appl/admin/LADPCDEV/out/link_fnd_5384.mk:1340:
warning: ignoring old commands for target
`D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/FNDRTR45.exe'
link.exe
-MAP:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.map
-NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
-OUT:D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/fdpesr.obj \
D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oranls10.lib
D:/oracle/LADPCDEV/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
/LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
"LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
gnumake: ***
[D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin/fndcpesr.exe] Error 157
Done with link of fnd executable 'fndcpesr.exe' on Thu Apr 22 17:35:31 IST
2010
Relink of module "fndcpesr.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory D:/oracle/LADPCDEV/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Regards,
Neeraj

Issues installing 10g ODAC on Windows 2008 with Oracle 10g Express

Similar Messages

Maybe you are looking for