Issues installing DVD drive on Power Mac G3

I know that there is no place for G3's so I hope that it's alright asking about it here. I bought a DVD drive for my Power Mac G3, took out the old CD drive and then put the new one in. It also said that I needed a decoder card so I got that too and installed it. The problem is that after installing it, the DVD drive wont recognize any discs that I put in. Do I need to find the drivers for it and download those? Any help would be appreciated. Here is the link to the place where I got the drive
w ww. dvwarehouse.com/DVD-ROM-8x-IDE-3.5-(G3--G4)-p-2155.html

Hey Tom, I tried the Patchburn but I couldn't get it to work since the DVD drive that I am using wasn't on the list. Just to let you know, I am running OS X 10.2.8 with 640 MB Ram and a 350 MHz processor. Any ideas? I want to keep from going to an authorized technician or Apple Store, but if that is what I have to do then I will do it.

Similar Messages

Dual Layer DVD drive in Power Mac G4?

Hi,
I ordered a Power Mac G4 and I have an internal dual layer DVD drive with lightscribe built into it. I installed it in my PC awhile ago and it works fine but I want to know if it will work in a Power Mac G4 running OS X (Tiger/Leopard)? The model number is IDVD16DLS and it's manufactured by I/O Magic. It's a really good drive and I hope it works on Mac.

Optical drives sold by I/O Magic are usually manufactured by any of a number of electronics plants in China. The drive will undoubtedly function in your G4, but it may not respond to booting with the C key depressed or boot the computer after having been designated as the startup disk. I tried a Memorex (LG-manufactured) DVD±RW drive in a B&W G3 (Panther), and even with the PatchBurn profile, the only way to force it to boot from a bootable CD/DVD disk was to immediately close the tray, after it would spin up/down at startup and eject the disk. I removed that drive and installed a Pioneer DVR±RW drive like this one in black or beige. The Pioneer burner boots the computer without the extra persuasion. Tiger is more forgiving of a third-party drive, than the previous OS X versions. As for the LightScribe function, you'll probably need to look for third-party, Mac-compatible labeling software.

Fix dvd drive door Power Mac????

Power Mac G4 Quicksilver 867mhz. The drive door for the dvd drive just hangs open. Can I get a spring or something to fix it?

Hi David,
The manual here shows how to remove that bezel & have a look on page 51& onward...
http://www.eserviceinfo.com/downloadsm/44158/Apple_Power%20Mac%20G4%20MDD.html

Terrible problems with CD/DVD drive on Power Mac G4

Hey guys,
I am pretty much unable to use the CD/DVD reader and burner in my Mac.
My Mac is a G4 dual-processor 1.42GHz with 2 GB of RAM running Mac OS X 10.4.11.
Here are the problems:
After a while of reading or writing a CD or DVD, the drive seems to freeze. The disc cannot be ejected.
Any application which attempts to read or write to the disc thereafter will become a zombie (orphaned) process. Force-quitting the application or kill-9'ing it does nothing.
This strange "infection" will eventually spread to all open applications, which will colour-wheel. Even ejecting the CD with the button on the drive (which doesn't always work) doesn't help.
If you manage to restart before this takes complete hold, nothing happens. If you do "sudo shutdown-r now", the screen goes blue and the little grey spinner appears. When you are forced to pull the power, restarting takes 20 minutes as the computer checks all drives.
This happened with my standard-issue SuperDrive, so I bought a new drive to replace it, thinking it was faulty, but exactly the same thing happened.
This has gone on so long, and it drives me insane. If anyone has ever experienced any similar problems, please let me know, as I've never found any info on the web about it. Please help if you know how to fix this!
Thank you in advance,
John

If you don't have a spare battery but do have a digital multimeter you can do a quick voltage check on the installed battery. If it is the 3.6V half-cell variety it should read at least 3.2V.

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
Or..
Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
Note:
There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
Therefore, in your case, you must install from the DVDs you have...

DVD Drive Non-Function Mac Mini 3,1 (late 2009)

Hi
The DVD drive in my Mac Mini has recently become non-functional, "About this Mac" sees the drive fine,
OPTIARC DVD RW AD-5670S:
Model:          OPTIARC DVD RW AD-5670S
Revision:          2AHI
Native Command Queuing:          No
Detachable Drive:          No
Power Off:          No
Async Notification:          Yes
Bay Name:          Upper
But when you insert a disc there is no response, it does not see to attempt to read it just ejects after about 20-30 seconds.
Any suggestions as to what could be the problem? This issue started sometime after I upgraded the memory, but I cannot be sure that the two things are connected as I very rarely use the DVD drive and the first time I tried to use it was several months later.
Many Thanks

Optical drives are pretty short lived in my experience.
Might try a cleaning Disc.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Issues installing Photoshop CS5 in my Mac Book Pro

I have heard that there are issues installing Photoshop CS5 in case sensitive Snow Leopard drives. How do I know if I have a case sensitive drive. I was able to download the 30 trial version of Photoshop CS5. My file system is listed as - Journaled HFS+. Is anyone familiar with this issue and will I have this issue installing Photoshop CS5 on my Mac? Thanks.

As you had already downloaded the installer, give it a try. Well if your file system is Journaled HFS+ installer will not report any error related to file system.
To check the file system -
Finder > File > New Finder Window
Select only the volume under Devices for which you wish to get the file system information.
File > Get Info
Under General tab check Format:
I believe it would be just "Mac OS Extended (Journaled)" in your case. For case-sensitive it would be like -
"Mac OS Extended (Case-sensitive, Journaled)" or "Mac OS Extended (Case-sensitive)"

No dvd drive on my mac..

I do not have a dvd drive on my mac and I purchased Lightroom 5, I didn't realize it had a dvd that it needed to run to install. Is it still posible to install without it? It is the student and teacher edition. Please help!!

AmbieC wrote:
i did download this, but this will only be a trial, can I use the validation key from the package I purchased to keep the trial going?
Yes.
Launch the trial, enter your serial number and the software will be permanently licensed on your computer.

Do I need to buy a particular 10.5 Leopard DVD for my Power Mac G5

I have been having problems with my Power Mac G5, which can only be resolved by reinstalling leopard, and since I don't have the DVD, I have been looking for a 10.5 Leopard DVD for my Power Mac G5. However I have noticed that some discs say they only work for a particular kind of mac ( which is true, since I attempted installing leopard with a macbook pro dvd, which did not turn out well ). Do I have to look for a 10.5 Leopard DVD that is particularly for a Power Mac G5? If so, where can I find one?

Yes, Gray Install Discs, the ones that come with Macs are Machine specific.
You need the Retail version.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP.

Is it possible to install Linux OS on power mac G4 which is running mac OS 9.2 right now ?

is it possible to install Linux OS on power mac G4 which is running mac OS 9.2 right now ?
if it is how shuld i delete mac os 9.2 and install linux ?
please mention the compatible linux version.
thanks in advance.
shane

Hi,
Yes, likely Ubuntu or a derivitive deprnding on which G4...
https://wiki.ubuntu.com/PowerPCFAQ#Is_Ubuntu_still_available_on_PowerPC.3F
Most every thing answered here...
https://wiki.ubuntu.com/PowerPCFAQ

Install SSD drive by removing installed DVD drive

Hi Experts
I got a dv8t-1200 CTO Entertainment Notebook PC
I already maxed out on 2 500Gig seagate HDDs totalling 1Tb
so planning to install ~500Gb SSD drive by removing installed DVD drive ...is it feasible? which brand etc...
any inputs will be appreciated.
thanks in advance.

-Ash- wrote:
Hi Experts
I got a dv8t-1200 CTO Entertainment Notebook PC
I already maxed out on 2 500Gig seagate HDDs totalling 1Tb
so planning to install ~500Gb SSD drive by removing installed DVD drive ...is it feasible? which brand etc...
any inputs will be appreciated.
thanks in advance.
Not advised it will not work or fit correctly you need to have a adapter to make that fit and as the other poster said your speed will be slower. Also you can get laptop drives each that are 2tb in both bay without needing to take out the OD drive itself. Did you look into that before getting a SSD.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Boot Camp 2 issues: repartioning; DVD-drive; screen; sound; usb-power

I found various problems in version 2 of Boot Camp (included in Leopard).
1.
After removing the Boot Camp 2 Windows partition, it is impossible to recreate a new Windows partition. Somehow the windows partition is not completely removed (?) and the Boot Camp Assistent goes on forever restoring the Macintosh HD to its original (one partition) state. Strangely, you can just quit the assistant during this process without consequences. Only repartitioning the complete HD using Disk Utility resolves this (this of course requires a complete reinstallation of OS X).
2.
After installation of Windows XP Pro, Windows treats the DVD-drive (OPTIARC DVD RW AD5630-A) as a removable media, just like a USB-memory. This means that you can remove the DVD hardware from the system(using the tray icon "Safe Removal hardware") by just one click. The DVD drive then completely disappears from 'My Computer' even with a CD in! The only way to get the DVD-drive back is by restarting Windows (inserting a disk can be done but it is impossible to access the disk; ejecting the disc is also impossible (the eject key on the mac keyboard doesn't work).
3.
I suspect that there is something wrong with the video driver in windows. This can be noted for instance with the black "moon crater" as the desktop image (lower left corner) or in the windows login-screen (lower blue part of the screen). The issue may be described as pixels varying in brightness and colour in a fast way. Pixels are not "constant" and it seems like a wave is moving over these parts of the screen. It seems more or less comparable to the problems reported with Boot Camp beta 1.4 on MPB's.
4.
I also suspect the windows sound driver (RealTek) not to be ok. Every Windows sound (startup Chime, warning, etc.) is followed by a strange electronic sound, as if the sound is echoing while fading away. I did not try to play an audio CD, but I think this may result in a not so pleasant experience.
5.
When I connect my 2 GB Kingston USB-memory to the internal hub of the new apple keyboard, Windows starts complaining that there is not sufficient power. The same configuration works without problems under Mac OS X.
Has anyone similar experiences? To me it seems like Boot Camp is still in beta stage....

I also encountered problems 4 and 5:
*To no. 4: Distorted sound and background noise:*
It's exactly the same as described by HLO-HL. As soon as the soundcard gets turned on in Vista (by any program i.e. iTunes, Mediaplayer) there is this background noise. Watching a DVD is almost impossible. Listening to music in iTunes is somewhat ok, but only at high volume (so the background noise cannot be heard) and it is still distorted sometimes.
I tried about everything from installing the latetest Realtek driver, updating the Intel chipset drivers, to changing the bitrates and so on. Still no resolution found. It seems the many others experience the same problem (search for 'distorted sound Vista').
*To no. 5: Low USB power reported*
I got this message with every device I connected (no matter if it was a 2.5''-harddrive, a cardreader, a camera or just a simple memory stick ...

Cannot install classic on my Power Mac G4

I have a Power Mac G4 (Digital Audio). When I purchased it from ebay it came with 10.4.8 installed but with no classic support. The reason I wanted classic is becuase I have dvd studio pro that needs classic to run. So I found a Apple KB that said that you could not install classic on a 10.4.8 machine and that you needed to downgrade to 10.2 (i think)using the restore disk and then use the software restore to install classic support. Since this was a new to me system this was not a problem. After downgrading to 10.2.7 (this was the OS on the grey restore disk (my mac also came with 10.2 disk that were not grey But I thought I should use the grey ones)) I then put in the software restore CD with the two cirlce shapes into the drive. The disk then says that it installed the software and goes to a screen that takes up most of the screen and then says that the wrong disk is on the drive and to put in the disk with the two circles in the drive. Then it ejects the disk. Since the disk in the tray is the disk that it is asking for (that I can tell anyway) I then push the tray back in with the same disk (two circle shapes) it reads it and then spits it out again saying that it is the wrong disk. I have tried this many times but still get the same message about the wrong disk. I only have one power mac g4 so there is no way I'm using the wrong software restore disk. I guess it is possiable that the seller who sold me the power mac could have given me the wrong software restore disk but the disk do say power mac g4 software restore on them. I also looked around ebay and saw the the software resotre could come on DVD's as well. Mine are on 4 or 5 CD (i think). Well that is my problem. Any help would be most welcome. Also I'm at work writing this so if anybody needs any specific info I will not be able to respond with the info right away.
Power Mac G4 (Digital Audio) 733 Mac OS X (10.2.x) 1 Gig Ram, 80 Gig HD

Hi, Steve.
If, when your hard drive was last formatted using OS X's Disk Utility, the option to install Mac OS 9 drivers was selected, then you will be able to install OS 9.2.1 on it by starting up from the 9.2.1 CD and running the installer normally. There is no need to erase the hard drive, and if you don't do so, the already-installed OS X will not be disturbed.
If OS 9 drivers were not installed when the drive was last formatted, the OS 9.2.1 installer CD won't be able to detect the hard drive at all, and you won't be able to install on it. In that event, you'll need to start up from your OS X 10.4 installer disc and reformat the hard drive, which will completely erase it. Be sure this time to select the option to install OS 9 drivers on it. Then install OS 9.2.1, and finally, reinstall OS X 10.4 and apply the combo updater to 10.4.8.

Issues installing DVD drive on Power Mac G3

Similar Messages

Maybe you are looking for