Issues installing LMS 3.2 on Windows 2008 R2
I am trying to install LMS 3.2 on W2008 R2 and am getting a platform error saying the operating system is not supported. Has anyone run into this before? Any help would be appreciated. I have attached a screenshot.
You should check this sort of things before you start....
Also 2008 R2 is also a bit special... I'm told
Cheers,
Michel
http://www.cisco.com/en/US/partner/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1101012
The following Windows systems are supported in LMS 3.2:
•Windows Server 2003 Standard Edition
•Windows Server 2003 Enterprise Edition
•Windows Server 2003 R2 Standard Edition
•Windows Server 2003 R2 Enterprise Edition
•Windows Server 2003 Standard Edition with Service Pack 1 and 2
•Windows Server 2003 Enterprise Edition with Service Pack 1 and 2
•Windows Server 2003 R2 Standard Edition with Service Pack 1 and 2
•Windows Server 2003 R2 Enterprise Edition with Service Pack 1 and 2
•Windows Server 2008 Standard Edition with Service Pack 1 and 2
•Windows Server 2008 Enterprise Edition with Service Pack 1 and 2
Both 32 bit and 64 bit Operating Systems are supported on the above versions.
CiscoWorks LAN Management Solution 3.2 supports only the following locales:
•US-English
•Japanese
Ensure that the CiscoWorks Windows Server has either the US-English or the Japanese version of Operating System installed. Otherwise, you must re-install the Operating System with one of the supported versions before you install CiscoWorks LMS.
Set the Regional Settings of the CiscoWorks to US-English for the US-English version and Japanese for the Japanese version.
Similar Messages
-
iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?
Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
current OS: windows 2003 R2 x64 SP2
current SCOM version: SCOM 2007 R2
current database version: SQL Server 2005
it's possbile to upgraded from win2003 which installed SCOM 2007 R2 into windows 2008 R2 directly without reconfiguartion SCOM?Hi,
And as far as I know, in-place operating system upgrade could work, but there is no document about this. Please take backup before doing upgrade.
If you want to in place upgrade the OS, we can simply move SCOM databases to new servers and rebuild management servers one at a time. the downtime for SCOM would be very minimum if the management group has the capacity for agents to report to failover
management servers while the primary MS is getting rebuilt. You do not have to perform in place upgrade on the OS to keep SCOM.
Based on your need, I would like to suggest you add a Windows 2008 R2 as additional management server for your management group. And if possible, please also upgrade your SQL 2005 to SQL 2008.
Here is a thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4713e303-76a7-4954-9494-55565757d65e/scom-server-os-and-sql-upgrade-from-2003-to-2008-r2
Regards, Yan Li
Dear Yan, Since rebuild/config SCOM Server is very complicated so it's better that I can just upgraded OS into windows 2008 R2 without do anything else. -
Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6
I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
http://support.microsoft.com/kb/885409
The Windows 2008 R2 server is running on CITRIX XenApp 6.
When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
[INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
Here is the error log:
Error log:
INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
INFO: Translating external format into raw format
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
e 2\client\install\../stage/products.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 49155
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Runtime
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en, en_GB]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]2ac
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Runtime.xml
INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:3.9996GB (4193848.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:130MB
INFO: Actual Value:26.0185GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:mndwg068cs
INFO: Expected Value:1023
INFO: Actual Value:791
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]
WARNING: Failed to load the view [SummaryUI] . Reason: .
Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
INFO: Terminating all background operations
INFO: Terminated all background operations
SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
ACTION: No additional information available.
SUMMARY:
- java.lang.NullPointerException.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup DriverHi;
Please see below note than Please see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
*+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
If notes not help than i suggest rise SR
Regard
Helios -
Can't install 64-bit DAC on Windows 2008 R2 64-bit
Hi all,
When I attempt to run the 64-bit DAC setup.exe installer (either from the root folder or from win64), I get the following:
Checking swap space: must be greater than 150 MB . Actual 3319 MB Passed
Checking monitor: must be configured to display at least 256 colors Higher than 256 . Actual 65536 Passed
Preparing to launch Oracle Universal Installer from D:\temp\OraInstall2011-08-2_03-11-12PM. Please wait ...
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//COPYRIGHT.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//LICENSE.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//LICENSE.rtf.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README_ja.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README_zh_CN.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//THIRDPARTYLICENSEREADME.txt.
I've tried to download the ZIP file a number of times and I've tried this on a number of Windows 2008 R2 64-bit machines, all with the same result. I'm able to run the 32-bit installer without error.
There's a similar post already on here that suggests using compatibility mode but nothing I've tried has enabled me to install 64-bit DAC on a 64-bit Windows 2008 R2 machine.
Has anyone successfully achieved this?
Thanks!
mroshawDoc Id: ID 849658.1
Alert : DAC 10.1.3.4.1 64-bit universal installer fails/hangs on Windows 64-bit and Linux 64-bit
"The issue is 32-bit OUI installer is used for all DAC 10.1.3.4.1 installation which fails during verification/checks on 64-bit machine. It's Installer check which fails, DAC files are fine for 64-bit OS." -
Install Forms 11g FM on Windows 2008 64 bit
Has anyone been able to install FM 11g (Forms etc) on Windows 2008 Server 64 bit.
Every time I attempt an install I get the OUI checking for swap space and monitor configuration. After that the OUI goes away and nothing else happens.
The entries in the installactions file is below.
Using paramFile: D:\Install\Disk1\install\win64\oraparam.ini
Checking swap space: must be greater than 500 MB. Actual 7154 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The commandline for unzip:
D:\Install\Disk1\install\win64\unzip -qqqo ..\..\stage\Components\oracle.jdk\6.0.10.33.0\1\DataFiles/"*.jar" -d "C:\Users\S-OTG~1.MAT\AppData\Local\Temp\2\OraInstall2009-09-22_08-56-31AM"
I have installed the WLS using the 64 bit version of JRockit with no problems.I reviewed your SR and wanted to clarify a few things. In the SR, you were not exactly told that installing (in general) was not supported on Win2008(x64). You were simply told that you could not use the 32bit download on a 64bit machine or install the Builders on x64. If you were told something else in a call I apologize as that information may have not been correct. Additionally, the SR is very confusing because you go from talking about Win2008 to XP to 2003 back to 2008 and so on. This is a very difficult way to troubleshoot. Dealing with one problem at a time will almost always result in the fastest resolution time. That said, here are the facts based on the platforms you mentioned in the SR.
1. Windows 2008 (64bit): This platform is intended for deployment (server). Although it may be possible to install the Forms/Reports Builders on this platform, Oracle is currently not supporting the Builders on any 64bit platform. Plans to support 64bit Operating Systems for Builders is still under review. So, for now, you must use the 64bit download to install on a 64bit platform. If you choose to attempt the installation of the Builders on this platform, you do it at your own risk.
2. Windows XP and Vista (32bit): These platforms are generally considered "client" platforms. These platforms are supported for using Builders. Technically they are not supported to be used as servers. Therefore, HTTP Server and Web Cache are not supported on these platforms. More details are explained in the Release Notes:
http://download.oracle.com/docs/cd/E12839_01/relnotes.1111/e10132/intro.htm#sthref8
3. Windows 2003 (32bit): This platform can be used with both the deployment components and the design-time components. That said, being a 32bit platform, I would not recommend trying to run a prod system and attempt to develop on it as well. Certainly, doing application maintenance on this machine would be fine, but if you were running a prod environment here, I would not suggest running the Builders full time too. 4gig of RAM or more would definitely be needed. See the following:
http://support.microsoft.com/kb/283037
Now, the actual problems you had/have:
Configuration failing when installing on Win2008 (64) - Looking at the SR, this appears to have been the result of trying to use the 32bit installation on the 64bit box. Upon initial release of the product, 64bit Windows distributions were not available. However, they are now and must be used on 64bit Windows 2008 and 2003 platforms. Refer to the OTN Download area.
Also seen in the error log was a connection issue. This is often caused as a result of several things, but the most common causes are WLS (node manager) is not running or the machine is under powered (usually lack of RAM). Regardless of what is documented, experience shows that a Windows machine will need to have at least 3.5 gig of RAM in order to support the installation process. This assumes that nothing else is running during the installation process unless it is absolutely needed. It seems that 4gig or more offers the most likely chance of a successfull installation on the first attempt.
Regarding the error which suggests that a given service already exists. This could likely happen if you attempted an installation, but it failed then you attempted to re-run the installation without first doing a thorough clean-up.
On the XP installation it appears that there was some memory issues. From the log: java.lang.OutOfMemoryError. As I mentioned, for the most likely chance of success, the machine should have at least 3.5 gig of RAM. If you are just installing the Builders you can have less, but if the config portion fails, you will probably see the connection failure seen in your other attempts. When/if this failure occurs, do not exit or do anything with the installer. Allow a minute or two (or more) for the new instance to completely start then select the Retry option. You will likely find that the configuration will complete successfully.
Also, important for any installation type.... When installing WLS, UNcheck the Launch Quick Start option that appears near the end of the WLS installation. Running this creates a default or demo instance. Unless you are planning to use this example instance, leaving it out can give back as much as 500 meg RAM in some cases. If you have already installed it and don't want to reinstall, stop whatever processes start as a result of that example instance.
SUMMARY
1. Be sure you are installing the correct software for your platform type. 64bit software for 64bit OS
2. On Windows, ensure that you have either installed the Loopback adapter or added your host name to the hosts file. Refer to Section 2.3:
http://download.oracle.com/docs/cd/E12839_01/install.1111/e10421/install.htm#CHDEAAGD
3. Ensure that the machine has at least 3.5 gig RAM. For systems with less, expect to see failures during the configuration portion of the install. Use "Retry" to overcome this.
4. Builders are only supported on 32bit platforms at this time:
http://download.oracle.com/docs/cd/E12839_01/relnotes.1111/e10132/intro.htm#sthref8
5. Ensure that WLS node manager is running before installing FMw
I don't think I missed anything, but just be sure to review the Installation Guide AND the Release Notes. -
Trouble installing/using SQL Developer on Windows 2008 R2
I need help installing sql developer.
I am running Windows 2008 R2.
I tried installing the 64 bit version, and when it asked for the path to the JDK, it complains that it doesn't exists. Can someone PLEASE point me to which JDK I need to install?
I tried installing the 32 bit versionand it installs fine, but then gives me the error that it can't load AMD 64-bit dll on a IA 32 bit platform.
PLEASE HELP. How can I run SQL Developer on Windows 2008 R2?
Links to the exact versions of what to install would be very very helpful.
Thank you!The versions required are in the release notes.
If you install the 64-bit SQLDeveloper you need a 64-bit JDK.
If you install the 32-bit SQLDeveloper you need a 32-bit JDK.
If your operating is 32-bit, you need a 32-bit SQLDeveloper.
Note that you need a JDK not a JRE
Edited by: Jim Smith on Apr 4, 2011 9:04 PM to fix 32/64 bit errors. -
Numeric precision issue on OLEDB 11 R2 on Windows 2008 R2
Hello,
I am trying to use Linked Server From SQL Server 2008 SP 1 on Windows Server 2008 R2 64 bit to access an Oracle database (Oracle9i Enterprise Edition Release 9.2.0.5.0).
I have installed client 11.2.0.1.0 R2 (win64_11gR2_client.zip) despite of I don't see any oracle driver in ODBC configuration (both 32 and 64 bit - why?),
my linked server works but with an issue:
The numeric columns in oracle have in sql server (via linked server and openquey) a data Precision issue;
In result my openquery cannot convert to Float, Numeric with the proper precision and scale.
Eg.: The original oracle value is 123,88 -> In sql sever via openquery and linked server becomes 12388,00!
Any help would be greatly appreciated!
Thanks for your help!
GC
In summary:
Oracle Server: Oracle9i Enterprise Edition Release 9.2.0.5.0
Application/SQL DB Server: Windows Server 2008 R2, SQL Server 2008 SP 1, Oracle client 11.2.0.1.0 R2 (win64_11gR2_client.zip)
Issue: Numeric data Precision issue (The original oracle value is 123,88 -> In sql sever via openquery and linked server becomes 12388,00!)
Edited by: 882615 on 31-ago-2011 7.34
Edited by: 882615 on 31-ago-2011 7.40SOLVED!
1) I Uninstalled previous Oracle drivers.
2) I downloaded the Oracle Database 10g Client Release 2 64 Bit (10.2.0.4) (10204_vista_w2k8_x64_production_client.zip) [http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html]
3) When the installation fails due to the version of windows I have modified the file "oraparam.ini" under the folder ..\client\install\ and i adde "6.1" at the line: "[Certified Versions]
#You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE Windows=5.0,5.1,5.2,6.0"
becomes: [...] Windows=5.0,5.1,5.2,6.0,6.1
4) Restart setup and install: Later during the setup the Oracle Universal Installer does another check but now we can overcome the problem by ticking the boxes and check user verified (cheching operating system).
5) Check Allow in Process box under Linked server Oracle Oledb provider;
And that's all! It Works!!
Bye -
I'm having issues installing CS 5.5 on windows 8.1
I've tried installing off the CD as well as downloads from the web. I've tried with my s/n and as a trial. I get the same error cannot install FC. The errors continue to say OS requirements not met.
I was hoping for more detail than that regarding the OS specs. You will have to look thru yourself. Here are the OS requirements for CS5.5 Design Premium. See if/where your machine fails to meet the requirements...
CS5.5 Design Premium system requirements
Windows
•Intel® Pentium® 4 or AMD Athlon® 64 processor
•Microsoft® Windows® XP with Service Pack 3; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (Service Pack 2 recommended); or Windows 7
•1 GB of RAM or more recommended
•9.3 GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash-based storage devices)
•1280 x 800 display with qualified hardware-accelerated OpenGL video adapter, 16-bit color, and 256 MB of VRAM
•Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
•Some features in Adobe Bridge rely on a DirectX 9–capable video adapter with at least 64 MB of VRAM
•DVD-ROM drive compatible with dual-layer DVDs
•Java™ Runtime Environment 1.5 (32 bit) or 1.6
•QuickTime 7.6.2 software required for multimedia features
•Adobe Flash® Player 10 software required to export SWF files
•Broadband Internet connection required for online services and to validate Subscription Edition (if applicable) on an ongoing basis*
Mac OS
•Multicore Intel processor
•Mac OS X v10.5.8 or v10.6
•1 GB of RAM or more recommended
•10.3 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
•1280 x 800 display with qualified hardware-accelerated OpenGL video adapter, 16-bit color, and 256 MB of VRAM
•Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
•DVD-ROM drive compatible with dual-layer DVDs
•Java™ Runtime Environment 1.5 or 1.6
•QuickTime 7.6.2 software required for multimedia features
•Adobe Flash® Player 10 software required to export SWF files
•Broadband Internet connection required for online services and to validate Subscription Edition (if applicable) on an ongoing basis* -
LMS 3.2 on Win 2008 Server - Web Server Issue
Hi,
I just installed LMS 3.2 on Windows 2008 Server Standart X64 and the CiscoWorks Web Server service does not start (Apache service is down but Tomcat up).
All other services seem to be correctly started even if this is quit long.
When I try to manually start the Apache Service with "pdexec Apache", i got :
ERROR:Get reply from server failed:
ERROR: Daemon Manager startup in progress. Please wait.
When the deamon is up, the second line disapeared but apache is still not responding and of course, the URL is unreachable.
This is a HP Proliant Server with 12Go RAM, is there a maximal size for the paging file ?
I did not modify TMP and TEMP variable, should I have done it before the installation ?
it appears to be some service startup issue on win 2008, is there bug fix or work around ?
pdshow attached
Thanks for your help, this is quit urgent.
Cedric.>>> is there a maximal size for the paging file ?
There's indeed a swap file issue with Win 2008. See the first reply in this thread for corrective action: https://supportforums.cisco.com/message/675893#675891
Though it may not apply, because you've installed LMS 3.2 ok, since you seem to be aware of it, the TMP/TEMP variables do need to be shortened, as noted in this post: https://supportforums.cisco.com/message/677383#677383
Is your Win 2008 Server running any Microsoft Service Packs? Because AFAIK Win 2008 SP2 is not yet supported, and no one seems to have any luck on it with LMS 3.2 yet.
After LMS 3.2 is up and running, if you can't log in to the web GUI, you might be running into the CSCtb17186 bug, described in this post: https://supportforums.cisco.com/message/676256#676256 -
Issue with installing password sync on Windows 2008
I have installed pwd sync 64 bit on Windows 2008. Configured it in direct mode (no jms). But when I change the password of a user it is not syncing with the IdM. We have the 32 bit pwd sync working fine on Win 2003. Is there any special steps for installing, configuring 64 bit pwd sync on Win 2008. Thanks. Jack
Hi again Tim-
Given the error "failed to crack URL" I believe you're hitting an issue we have documented as bug # 21999. Here's the jist of it and a possible way around it.
==========
When installing password sync on a Windows 2008 system, if you are not
logged in as 'Administrator', the installer and the configure applications
may be subject to Windows File And Registry Virtualization (FARV). This may
cause the registry entries for password sync to be written to the user portion
of the registry, rather than the system portion. Subsequently, password sync
will fail with the message "failed to crack URL".
To work around FARV, either run the MSI installer from a privileged cmd.exe
prompt, or run the configure.exe application using the "Run As Administrator"
functionality (right-click on the configure.exe application, select "Run As
Administrator").
==========
Hope this helps.
Regards,
Alex -
RDP not working after installing Windows 2008 R2 Service Pack 1
Hi,
We have Windows 2008 R2 Data center editions with Service Pack 1 which we recently implemented. Now when i create new virtual machine in Hyper-V with Windows 2008 R2 Standard edition without Service Pack then i can able to take RDP of virtual server. But
when i install Service Pack 1 on Windows 2008 R2 Standard edition (Virtual Machine) then i can't able to take RDP.
By using local administrator i can take remote desktop but using domain administrator i can't take remote desktop. Domain Administrator is part of Remote Desktop Users group. I tried to reinstall and uninstall KB2667402.
Your help is highly appreciated.
Regards,
Arjun
Arjun V.Hi Arjun,
It might happens that it occurs due to some antivirus software. You can try to disable or uninstall the 3rd Party security software in the Windows Server to see whether same issue still exists.
In addition for your issue, another suggestion to try uninstalling the 2 windows updates and then again re-install the update manually with below link provided and restart the server. After restarting check whether the issue still occurs. You need to uninstall
& re-install manually below 2 updates:
1. KB2667402 – Download Link
2. KB2621440 – Download Link
Hope it helps!
Thanks. -
DRM Web Client 500.19 issue on windows 2008(x64) ERROR
Hi,
I installed DRM version 11.1.2 on windows server 2008(x64), according to the documents, I pre-installed .Net 3.5.1 and modified the applicationHost.conf file.
I found this in epm_install_troubleshooting
Web Client Access Failure
Issue: After installing Data Relationship Management on Windows 2008 64-bit platform, you
get this error message when attempting to access the Web client:
HTTP Error 500.19 - Internal Server Error The requested page cannot be
accessed because the related configuration data for the page is invalid.
Solution: In the IIS configuration file (C:/Windows/System32/inetsrv/config/
applicationHost.config), replace the two occurrences of Deny in the following section with
Allow:
<configuration>
<configSections>
<sectionGroup name="system.webServer">
<section name="handlers" overrideModeDefault="Deny" />
<name="modules" allowDefinition="MachineToApplication"
overrideModeDefault="Deny" />
However when I access the web client I got the 500.19 error, can't find C:\inetpub\wwwroot\drm-web-client\web.config, the web.config file do not exist.
Config File \\?\C:\inetpub\wwwroot\drm-web-client\web.configMight be too late, but the problem is that IIS is pointing to the incorrect path. Should not be pointing to C:\Inetpub\wwwrooot\.... it should be pointing to Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\web-client same thing with the migration-client IIS app. To fix use the IIS Manager click the drm-web-client virtual directory and select "Advanced Settings" and update the "Physical Path" property.
Pablo -
DRM Web Client 500.19 issue on windows 2008(x64)
Hi guys,
I installed DRM version 11.1.2 on windows server 2008(x64), according to the documents, I pre-installed .Net 3.5.1 and modified the applicationHost.conf file. The installation is successful without error. However when I access the web client I got the 500.19 error, can't find C:\inetpub\wwwroot\drm-web-client\web.config, the web.config file do not exist.
I guess this is something about IIS configuration but I'm not familiar with IIS, can anybody give me some suggestion?
ThanksI found this in epm_install_troubleshooting
Web Client Access Failure
Issue: After installing Data Relationship Management on Windows 2008 64-bit platform, you
get this error message when attempting to access the Web client:
HTTP Error 500.19 - Internal Server Error The requested page cannot be
accessed because the related configuration data for the page is invalid.
Solution: In the IIS configuration file (C:/Windows/System32/inetsrv/config/
applicationHost.config), replace the two occurrences of Deny in the following section with
Allow:
<configuration>
<configSections>
<sectionGroup name="system.webServer">
<section name="handlers" overrideModeDefault="Deny" />
<name="modules" allowDefinition="MachineToApplication"
overrideModeDefault="Deny" /> -
Installing Ciscoworks LMS 4.0 on Windows domain member server.
Hello.
I'm looking for some suggestions about installing CiscoWorks LMS 4.0, and upgrade, on a domain member server running Windows 2008 R2 SE 64 bit.
Thanks.
AndreaHere are the basic install best practices:
1) Install as a local administrator (this means create a local account and add it
the "Administrators" group).
2) My Computer -> Properties -> Advanced -> Environment Variables
Set the USER TMP and TEMP to a shorten path like
C:\Windows\temp
3) Make sure you have FIXED pagefile size like 8182
My Computer -> Properties -> Advanced -> Performance Options -> Advanced
4) May need to reboot, certainly log out an back in to make sure step 2 applies.
5) Stop all anti-virus and firewall during the installation. Disable them in services and reboot if necessary.
* NOTES: Anti-virus can be re-enabled after installation, but you should EXCLUDE
the NMSROOT directory as long as LMS is installed on the server. DEP should
remain off (that is, set to only protect critical Windows system files) as long as LMS
is installed on the server.
* If Internet Information Services (IIS) is detected on your system and if you have
continued the installation with IIS services, you cannot use the port number 443 for
HTTPS. Instead, you must use the port numbers ranging from 1026 to 65535 for
HTTPS to avoid this conflict.
When performing the installation, make sure these two steps are followed:
* Install from original, locally attached media
* NEVER abort the installation after the installer says not to
It may not always be possible to install from original, locally attached media
(especially on VMs). But you should avoid from installing over the network as hiccups
can cause bad installations. If you are installing on a virtual machine, convert the DVD
to an ISO image, then mount that within the VM.
Here is the document detailing all ports needed to be allowed (excluded from policy)
for LMS 4.0
LMS 4.0 Port Usage
General Notes:
If you want to upgrade the operating system from Windows 2003 or Windows
2008 to Windows 2008 R2, you must first complete upgrading the operating
system, and then install the LMS 4.0.x Windows 2008 R2 patch.
* You can install the LMS 4.0.x Windows 2008 R2 patch only on LMS 4.0.x
and not on the lower version of LMS.
* You cannot install Integration Utility and HP Open View 7.x or 8.x on
Windows 2008 or Windows 2008 R2 servers.
Check out:
System and Browser Requirements for Server and Client
LMS Patches-Windows
Maybe you are looking for
-
Hi, there I'm not really pro- at RDS in server 2012 (r1), but I have a problem and don't find anything suitable on internet: I'm trying to publish one of my own, unlisted programs to rdweb, but it keeps saying "You must specify a file from the RD Ses
-
I used the code snippets to create a custom cursor and it works well. What if I want that cursor to change when it's clicked? Can I do that easy enough? Thanks.
-
Adding Portlet at Runtime to the Portal, displaying Empty Error Message Box
Hi All, I had developed a Webcenter Portal Application, in which i had included runtime editing capabilities for pages and customization at user level - deployed successfully in PS5 Server. I also made another simple Portlet Producer Application - de
-
Doesn't find import classes...
-
Cannot convert DT_NTEXT to DT_STR
Hello, everyone, I have a simple packages that loads Excel data into a SQL Server table. One of the Excel Comlums is assigned a data type of DT_NTEXT and it's corresponding database column is varchar(1000). I tried changing the data type to DT_STR in