Issues installing Virtual box VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm

Hello,
I am trying to install VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm on OEL5.6
More info on my environment.
+[root@ora67blrac1 Disc 6 080911]# uname -a+
Linux ora67blrac1.localdomain 2.6.32-100.26.2.el5 #1 SMP Tue Jan 18 20:11:49 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
+[root@ora67blrac1 OracleVirtualBox]# cat /proc/version+
Linux version 2.6.32-100.26.2.el5 ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Jan 18 20:11:49 EST 2011
+[root@ora67blrac1 OracleVirtualBox]# uname -mi+
x86_64 x86_64
The cpu is intel (mother board is DH67BL).
I tried to install the virtualbox via yum but it complained about the public key (see below), then I tried using rpm -ivh and it complained about a missing file libSDL-1.2.so.0()(64bit)*
Any advice will be much appreciated.
Thanks,
S.
Screen shot starts here ...................
[root@ora67blrac1 OracleVirtualBox]# yum localinstall VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Setting up Local Package Process
Examining VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm: VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64
Marking VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package VirtualBox-4.1.x86_64 0:4.1.2_73507_rhel5-1 set to be updated
--> Processing Dependency: libSDL-1.2.so.0()(64bit) for package: VirtualBox-4.1
--> Running transaction check
---> Package SDL.x86_64 0:1.2.10-8.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
==============================================================================================================================
Package Arch Version Repository Size
==============================================================================================================================
Installing:
VirtualBox-4.1 x86_64 4.1.2_73507_rhel5-1 /VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64 130 M
Installing for dependencies:
SDL x86_64 1.2.10-8.el5 ol5_u6_base 214 k
Transaction Summary
==============================================================================================================================
Install 2 Package(s)
Upgrade 0 Package(s)
Total size: 130 M
Total download size: 214 k
Is this ok [y/N]: y
Downloading Packages:
SDL-1.2.10-8.el5.x86_64.rpm | 214 kB 00:01
warning: rpmts_HdrFromFdno: Header V4 DSA signature: NOKEY, key ID 98ab5139*
Public key for VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm is not installed*
[root@ora67blrac1 OracleVirtualBox]# yum list VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm
Loaded plugins: rhnplugin, security
This system is not registered with ULN.
ULN support will be disabled.
Error: No matching Packages to list
[root@ora67blrac1 OracleVirtualBox]# rpm -qa | grep VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm
[root@ora67blrac1 OracleVirtualBox]# rpm -ivh VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm
warning: VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 98ab5139
error: Failed dependencies:
libSDL-1.2.so.0()(64bit) is needed by VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64
Screen shot Ends here ...................
---------------------------------------------------------------------------------------------------------------------

873290 wrote:
I tried to install the virtualbox via yum but it complained about the public key (see below), then I tried using rpm -ivh and it complained about a missing file libSDL-1.2.so.0()(64bit)*Install the key using the instructions from here: http://www.virtualbox.org/wiki/Linux_Downloads
Then, use the instructions at http://public-yum.oracle.com to setup a yum repository for your Oracle Linux 5 Update 6 server. Yum will then be able to find the proper dependencies.

Similar Messages

Windows 8 will not boot - After install virtual box (virtualization)

I installed virtual box and now I am unable to start window 8.
I read online that there is a known issue with virtualization on windows 8. They suggested trying to toggle virtualization on/off in the bios which has not solved my problem. Does anyone know of anything else I can do to get my install back? I really do
not want to have to re-install windows. I have only had windows 8 installed for three weeks!

I tried upgrading from VirtualBox 4.3.12 to 4.3.20 and ended up with an unbootable machine (Windows 8.1 Pro 64-bit). It would come up to the desktop but nothing would work - there were no icons on the desktop, the tray applications didn't seem to be loading,
the transparent task bar was shown as a block of solid colour. Pressing CTRL-ALT-DEL brought up the menu where I could choose Task Manager, but the Task Manager itself would not show up, just a dialog warning me that a process was not responding and asking
if I wanted to end the task (I forget the exact wording). Clicking "End task" that dialog removed the dialog only for it to appear again a minute later. It was not possible to do anything with the machine or to open the Task Manager.
I have updated through a number of versions of VirtualBox without issue. 4.3.20 seems to be a bad update. Unless some other recent update has changed something in Windows so that the VirtualBox update now conflicts.
I forced the system to turn off then used System Restore to reset it to an earlier time. System Restore told me it had failed with an error, but then when I rebooted the machine a dialog came up at the desktop saying that System Restore had succeeded. It
works again now but I am stuck with the older version of VirtualBox.

Need help installing Virtual box Windows VM's

I am installing virtual box on wife's mac.   I got the instructions here: http://osxdaily.com/2011/09/04/internet-explorer-for-mac-ie7-ie8-ie-9-free/
I did it previously and it all worked well. Recently the windows session license expired so I reinstalled that portion and it worked for about a week. Then the Virtual box program just stopped working.   So I uninstalled the virtual box and am attempting to reinstall all components.
First step is install Virtual box from here: https://www.virtualbox.org/wiki/Downloads   This went ok andvirtual box runs but there are no VM's.
There is then a script to install the windows VM's. It is failing.
Script is accessed by copyinf this command into terminal:
curl -s https://raw.github.com/xdissent/ievms/master/ievms.sh | bash
This is the error I get.   It seems there is a file that already exists but I'm stumped as to what to do.
Last login: Fri Mar 28 09:06:48 on ttys000 ROSANNEs-MacBook-Air:~ rosannemcginn$ curl -s https://raw.github.com/xdissent/ievms/master/ievms.sh | bash Checking for VirtualBox Checking for Oracle VM VirtualBox Extension Pack
Pack no. 0:   Oracle VM VirtualBox Extension Pack
Building IE6 VM
Checking for existing OVA at /Users/rosannemcginn/.ievms/IE6 - WinXP.ova Checking for existing IE6 - WinXP VM Creating IE6 - WinXP VM (disk: /Users/rosannemcginn/.ievms/IE6 - WinXP-disk1.vmdk) 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interpreting /Users/rosannemcginn/.ievms/IE6 - WinXP.ova...
OK.
Disks: vmdisk1   136260878336      -1      http://www.vmware.com/interfaces/specifications/vmdk.html#streamOptimized     IE6 - WinXP-disk1.vmdk -1    -1
Virtual system 0:
0: Suggested OS type: "WindowsXP"
    (change with "--vsys 0 --ostype <type>"; use "list ostypes" to list all possible values)
1: VM name specified with --vmname: "IE6 - WinXP"
2: Number of CPUs: 2
    (change with "--vsys 0 --cpus <n>")
3: Guest memory: 512 MB
    (change with "--vsys 0 --memory <MB>")
4: Sound card (appliance expects "", can change on import)
    (disable with "--vsys 0 --unit 4 --ignore")
5: USB controller
    (disable with "--vsys 0 --unit 5 --ignore")
6: Network adapter: orig NAT, config 2, extra slot=0;type=NAT
7: CD-ROM
    (disable with "--vsys 0 --unit 7 --ignore")
8: IDE controller, type PIIX4
    (disable with "--vsys 0 --unit 8 --ignore")
9: IDE controller, type PIIX4
    (disable with "--vsys 0 --unit 9 --ignore")
10: Hard disk image: source image=IE6 - WinXP-disk1.vmdk, target path=/Users/rosannemcginn/.ievms/IE6 - WinXP-disk1.vmdk, controller=8;channel=0 0%...
Progress state: VBOX_E_FILE_ERROR
VBoxManage: error: Appliance import failed
VBoxManage: error: Could not create the clone medium '/Users/rosannemcginn/.ievms/IE6 - WinXP-disk1.vmdk'.
VBoxManage: error: VMDK: could not create new file '/Users/rosannemcginn/.ievms/IE6 - WinXP-disk1.vmdk' (VERR_ALREADY_EXISTS)
VBoxManage: error: Details: code VBOX_E_FILE_ERROR (0x80bb0004), component Appliance, interface IAppliance
VBoxManage: error: Context: "int handleImportAppliance(HandlerArg*)" at line 779 of file VBoxManageAppliance.cpp ROSANNEs-MacBook-Air:~ rosannemcginn$

Here is how I install mine, for numbers I will assume you have a 100GB HDD and 2GB of RAM:
Boot from Win7 DVD and create two partitions, then install Windows7 on one of them. During the install Windows will create a 3rd partition to boot from. You will now have:
sda1 - 100MB - Windows Boot - boot flag
sda2 - 50GB - Windows 7 - no flags
sda3 - 50GB - Unpartitioned Space - no flags
Next boot into Arch and choose to manually partition the drives using cfdisk, using the unfinished space create 3 logical partitions of the sizes 100MB, 2GB, and 50GB. Mark the 100MB one you just created with a boot flag and unmark the 100MB one Windows created.
Now you should have:
sda1 - 100MB - Windows Boot - no flags
sda2 - 50GB - Windows 7 - no flags
sda3 - 50GB - Unpartitioned Space - no flags
sda5 - 100MB - Linux Boot - boot flag
sda6 - 2GB - Linux Swap - no flags
sda7 - 50GB - Arch - no flags
Click OK/Confirm/Write and then continue to the next step - File Systems and Mountpoints.
Here you need to set the FS for sda5,6,7 and make sure not to touch sda1,2. Choose ext2 for sda5, swap for sda6, and ext3 for sda7. You will also be asked for mountpoints. Pick "/boot" for sda5 and "/" for sda7. Click OK/Confirm/Write and then continue to install Arch like normal, when you get to installing the bootloader make sure to install it on /dev/sda and uncomment the Windows part of the grub/menu.lst file.
Reboot the system and you are done

[Solved] Installing Virtual box

I'm trying to install Virtual box from `.run` file. (I downloaded that from http://download.virtualbox.org/virtualb … amd64.run)
I'm runing following command to install Virtual box :
sudo sh VirtualBox-4.3.6-91406-Linux_amd64.run
Gets me following error :
VirtualBox Version 4.3.6 r91406 (2013-12-18T16:33:45Z) installer
Please install the build and header files for your current Linux kernel.
The current kernel version is 3.12.6-1-ARCH
Problems were found which would prevent VirtualBox from installing.
Please correct these problems and try again.
Any helps would be appreciated.
Last edited by kamrava (2014-01-06 19:55:23)

haaja wrote:
TheSaint wrote:
Best was
# pacman -S linux-headers virtualbox
Virtualbox only need the kernel headers during the build phase. Even if that wasn't the case, pacman can handle dependencies just fine.
Indeed, my mistake.

Can I install Virtual Box on my macbook pro safely if filevault is enable? Lion w 8 g memory.

Can I install Virtual Box on my macbook pro safely if filevault is enabled? Lion w 8 g memory.

You are going to have to install Windows first.

Error installing virtual box guest additons

On my windows 7 laptop I have virtual box 4.0 . I installed Oracle enterprise linux 5.5 and i want to make a shared folder . When i run VBoxLinuxAdditions.run I get the folowing :
"Your system does not seem to be set up to build kernel modules . If the following module compilation fails then this could be the reason .
The missing package can be probably installed with yum install kernel-devel-2.6.18-195.el5"
After this it invite me to see the content of file /var/log/vboxadd-install.log . In this log it tell me it can not find the kernel sources .
What can I do? I must download anothr version of Oracle enterprise linux? wihich one?
Many thanks,
Aurel

Hello,
I configured the yum tool (as I find out on http://public-yum.oracle.com/) and I run yum install kernel-devel . After that I run sh /media/VBOXADDITIONS_4.0.0_69151/VBoxLinuxAdditions.run
The process of building kernel modules for Virtual Box additions is ending in error - it doesn't know about gcc tool. In what package there is this tool?
Thank you,
Aurel

Virtual Box install - directory path?

Dear Experts,
64 bit Server is:
lsb_release -a
LSB Version: :core-3.1-amd64:core-3.1-ia32:core-3.1-noarch:graphics-3.1-amd64:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: EnterpriseEnterpriseServer
Description: Enterprise Linux Enterprise Linux Server release 5.5 (Carthage)
Release: 5.5
Codename: Carthage
uname -a
Linux black.testrac.com 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
I'm trying to install Virtual Box.
It's been quite the soap opera so far.
rpm -qa | grep -i "virtual"
VirtualBox-4.1-4.1.8_75467_rhel5-1
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [ OK ]
Uninstalling old VirtualBox DKMS kernel modules [ OK ]
Trying to register the VirtualBox kernel modules using DKMS[FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
cat /var/log/vbox-install.log
Makefile:172: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
So I downloaded and installed the kernel source files.
For any other poor souls, you can find many source kernels here:
http://oss.oracle.com/el5/SRPMS-updates/
rpm -ivh kernel-2.6.18-194.el5.src.rpm
1:kernel warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
########################################### [100%]
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
cd /usr/src/redhat/SPECS
ls -l
total 820
-rw-rw-r-- 1 root root 834836 Mar 29 2010 kernel-2.6.spec
file *
kernel-2.6.spec: ASCII English text
rpmbuild -bp --target=noarch /usr/src/redhat/SPECS/kernel-2.6.spec
+ echo 'Patch #20207 (xen-vtd-ignore-unknown-dmar-entries.patch):'
Patch #20207 (xen-vtd-ignore-unknown-dmar-entries.patch):
+ patch -p1 --fuzz=2 -s
+ exit 0
ls -l /usr/src/redhat/BUILD
total 4
drwxr-xr-x 6 root root 4096 Jan 8 20:37 kernel-2.6.18
ls -l /usr/src/redhat/BUILD/kernel-2.6.18
total 20
drwxr-xr-x 2 root root 4096 Dec 6 2007 config
-rw-r--r-- 1 root root 3161 Jan 8 20:37 Config.mk
drwxr-xr-x 21 root root 4096 Jan 8 20:37 linux-2.6.18.noarch
drwxr-xr-x 19 root root 4096 Sep 19 2006 vanilla
drwxr-xr-x 8 root root 4096 Dec 6 2007 xen
I made a link:
ln -s /usr/src/redhat/BUILD/kernel-2.6.18 /usr/src/linux
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [ OK ]
Uninstalling old VirtualBox DKMS kernel modules [ OK ]
Trying to register the VirtualBox kernel modules using DKMS[FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
cat /var/log/vbox-install.log
Makefile:175: Warning: using /usr/src/linux as the source directory of your Linux kernel. If this is not correct, specify KERN_DIR=<directory> and run Make again.
Makefile:190: *** Error: unable to find the include directory for your current Linux kernel. Specify KERN_INCL=<directory> and run Make again. Stop.
Surprise!
Question:
Did I install the kernel source correctly, or not?
If so, what is the correct directory to use for: KERN_INCL=
Thanks a lot!

Actually yes, I did read the docs. Shall we say, the docs and the error messages could use some improvement.
ie.
xen is not mentioned at all in the install page. Nor in the table of contents.
Since dkms was "recommended", and the error messages referred to it, I spent a lot of time searching for that package.
You can see all the struggle I've been doing.
It's very highly doubtful I could have installed this without your answers.
Thanks a lot for your help!

Help required to install solaris 10 in virtual box 4.1.2 on a win xp sp3 mc

Hey can u help me to install Solaris using Virtual box 4.1.2 i hav downloaded and just installed Virtual box 4.1.2 and an iso image of the available solaris 10
Please help
regards
fel208

Moderator Action:
This inquiry was initially posted to the Predictive Self Healing forum for some unfathomable reason.
It has now been moved to the Oracle VM and Virtualization forum for closer topic alignment.
Advice to original poster:
If you couldn't read enough posts to figure out which forum was appropriate, how are you going to be able to read replies to your question? You should go back to wherever you found Virtualbox and Solaris and read the product documenteation. Installation instructions are already there.

Virtual Box 4.0.8 Windows Host - Guest Additions problem

Hi,
I have installed Virtual Box 4.0.8 with host O/S Windows 7 Home Premium 64 bit Processor AMD Phenom II x6 and enabled the VT.
I installed OEL 5.6 and 6.1 guests (both x86_64 version).
But when I installed Guest Additions, nothing happened and only showing maximum resolution *1024x768.*
I never had this problem before with my older machine and older version of Virtual Box.
is this known issues? is this cause by the VT or conflict with the graphic card?
Any advice appreciated
thanks
Lie

This would be better addressed on the VirtualBox forum. see https://www.virtualbox.org/

Network Limited Conectivity & Virtual-Box

Just bought a new Dell Inspiron 3137 laptop, with 64-bit Windows 8.0 installed (not 8.1). I have four legacy 16-bit programs (Bible study, Sermon editor/reference, 2 games) that I need to use as cannot find more recent versions on the market. So initially
tried to use MS Virtual-PC but it would not install, so then installed Virtual-Box followed by Win-Xp. The W8 OS now (after serious setup efforts) connects ok under Wi-Fi and Ethernet to the internet and to computers on my home network. But Virtual-Box
and Xp fails! looking at my "Networks" W8 pop-up window I see an entry of "Unidentified Network" and that it has limited connectivity. Xp indicates "connected" but received packet count is 0.
Think this is a result of my attempts & connections under Virtual-Box. I go to Network and Sharing Center and find first 2 category are enabled but "All Networks" entry is disabled/off and I cannot find any way to enable! I go to
"Network Connections page and I see 6 entries (Bluetooth, Netgear router, broadband, Virtual-Box, etc). I run the troubleshooter on the Virtual-Box link and am informed that it cannot fix & no useful help provided to me by system! No progress
w/ comparability mode on legacy programs.
I have initially informed Dell Technical support then most recently Oracle of this problem >>> both say it is not their product malfunctioning and that errors are in configuration of Windows-8 >> but no help.
This is serious irritation as have already wasted about 40 hours chasing/messing with this problem >>>> NEED HELP AND SUGGESTIONS - PLEASE!
Thanks .....

Thanks Kevin for the reply, but no progress here. I am completely new to Windows 8.0 and slightly new to any networking, so keep that in mind should you decide to reply again, A.K.A., I might need a bit of step-by-step assistance .....
The symptoms here : My new Dell computer finally now connects by wi-fi to home network, has always connected to internet. I am using Virtual-Box v4.12.18 w/ Xp Pro, SP-3. Under Xp in Network I note that it shows "Connected" but received packet
count is 0, sent packet count is hundreds. Looking within W8 at advanced settings, I see 3 network types, 1) Private = enabled, 2) Guest = enabled, 3) All = NOT enabled (and I can find no click, link or setting that
will enable). Have tried with Network Discovery on & off, and with File Sharing on & off, and with 56-bit & 128-bit encryption selected alternatively. So run the Troubleshooter = first pass informed
it could not fix problem : later, troubleshooter stated it fix some problem(s) with incoming connections = at that point I looked and found that under W8 both sent & received packet count was into low thousand but Xp still showed 0 receive.
When I look at Networks under W8 I see "Netgear52" W/ no errors, then see either "Unidentified Network (limited connectivity) OR randomly see "VirtualBox (Limited Connectivity) and so think Netgear52 is what I should be using.
Again under W8 networking pages, I try "Setup Network - Chose Wireless Router" am asked for SSID (whatever?) but showing nothing after 10-minutes. Have made all efforts both with & without Firewall on Xp & I think on W8 also, no changes
to Security Essentials Xp is in NAT mode and have not yet tried "Bridged."
"ipconfig?"
Base system here are : Dell 3137 Inspiron laptop, Win 8.0 + Win-Xp Pro. Motorola Surfboard cable modem. Netgear52 router. Various home networked Eithernet connected computers. Various Tablet & eBook readers connected Wi-Fi. No other component is
reporting any errors and all work Ok. Xp is Ok except zero connectivity to Internet and home network. Need to get Xp connected so can access data for legacy programs off home & church networks.
So your help seriously appreciated! Bill

Problems with getting internet explorer on my mac with virtual box 4.3.20, who can help?

This is what I did:
1) downloaded and installed virtual box 4.3.20
2) copied
curl -s https://raw.githubusercontent.com/xdissent/ievms/master/ievms.sh | IEVMS_VERSIONS="11" bash
in the Terminal (for IE 11 only). I got this from the link: Internet Explorer for Mac the Easy Way: Run IE 7, IE8, & IE9 Free in a Virtual Machine
3) that is where things went wrong, see attached image for the error I get (after a long time) in the Terminal
Tried it twice but every time the same problem.. I hope someone can help me!

The error means that your download session was interrupted. There could be a problem with your Internet connection or a problem with the remote server providing the download. If you otherwise have no trouble with Internet, I suspect the later.
But why would you want to bother downloading someone's virtual machine to run MS Internet Explorer? Not only is there a real security risk since you don't know what the VM or installation script is doing, but if the VM is running MS Windows, then the person providing the software is breaching software distribution and copyrights laws, and so will you, using the software.
Btw, have you read any of the comments? Do you really want to download 20GB? (nonsense)
If you need IE and VirtualBox, simply create a new VM and install MS Windows using a regular copy and enter your license code. There is also no need to install different versions of IE, since IE can be configured to run as a prior version.
However, there is no need to install and run MS Windows to run IE. There are products that provide free Windows API to let you run PC applications as they were Mac applications without installing Windows, e.g. Wineskin, Wine Bottler, or commercial solutions, such as Crossover.
See http://www.wikihow.com/Install-Internet-Explorer-on-Mac-Using-WineBottler

What happens to Virtual Box Partition after uninstallation.

I am peter currently working on OS X Yosemite.
My mac is consisted of 500Gb Flash drive, * Gd Ram, I3 Processor and etc.
I have Installed Virtual Box & during Installation I have selected the Partition of 100GB, what will happen to that space when I uninstall virtual box.
Because later when I tried to install windows through bootCamp assistant, I have continious error speaking about partition.
How to resolve this issue

As far as I know, if you delete a folder, then any virtual copies made from photos in this folder will also be deleted.
If so, is this reversible in any way? Will i recover these virual copies if I add the folder back into LR's catalog later on?
Your virtual copies will not return. Which brings up the interesting question ... why delete photos/folders from Lightroom only to bring them back later? My suggestion is that you not delete the folders. Just leave everything imported in Lightroom, do not delete photos/folders from Lightroom, its a much better workflow, takes less work, and doesn't run the risk of deleting something only to find you need it later. The idea of deleting folders from Lightroom only to import them later is abhorrent to me.
Also will Adobe Bridge be able to read these virtual copies in both before and even after the folder has been removed from LR4? Or is the 'virtual copy' functionality specific to LR and that the only way to preserve it is to keep the original image within LR and never delete it?
Virtual copies exist in Lightroom. They do not exist outside of Lightroom.
If you really want to have virtual copies outside of Lightroom, you would need to export them (which changes them from virtual copies to real copies)

Can't run Solaris OVF on Virtual Box 3.2

I just installed Virtual Box 3.2 on Windows 7 64-bit and I wanted to use the Solaris OVF (downloaded from the site). I imported the ovf file to the VB, using the default setting except the memory (changed from 768 to 1024). After it's done, it just wont start. it boots up then it gives an error:
syncing file system 1 done (sometimes it's 2 done, or 1 1 done)
then it dumps the kernel, then reboots. it does this over and over. i can boot it up in single-user mode.
are they just not compatible or something?

I'm able to run JSF 2.1 on Tomcat 7 without error, so it's something specific to your environment or application. Looking at the stack trace, I see several instances of "java.lang.IncompatibleClassChangeError", which suggests the code is being loaded by a VM with a different Java-compliance level than the VM that compiled the code. You might want to look at your VM settings for the project and the runtime configuration for the server. There may be more issues, but first I would rule that out.
- Ian

Error While Joining a domain.| Adding a virtual box machine to host machine's domain

Dear All,
I have a Virtual Box(guest) Where Windows Server 2008 r2 is installed.Virtual box is hosted by a machine which Uses Windows Server 2008 r2. Host machine is a domain controller.I have added guest to another domain
other than host.But whenever I tried to add guest machine to host domain It shows me following error(See below).
An error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "crmrc.com".
The error was: "No records found for given DNS query."
(error code 0x0000251D DNS_INFO_NO_RECORDS)
The query was for the SRV record for _ldap._tcp.dc._msdcs.crmrc.com
Could you please suggest me the solution for it?
Thanks and Regards,
Yusuf

Hello,
C:\Users\Administrator>ipconfig/all
Windows
IP Configuration
Host Name . . . . . . . . . . . . : MSCRM
Primary Dns Suffix . . . . . . . : crmrc.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : crmrc.com
Ethernet
adapter Network Bridge:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : BA-AC-6F-3F-A3-51
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8573:2122:495b:93bc%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.78(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 280669295
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-B1-48-BF-B8-AC-6F-3F-A3-51
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel
adapter isatap.{39C0341C-67DC-405D-B8F4-25DA555D53C0}:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.78%12(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel
adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I suppose here that this is a DC/DNS server. I see that 59.144.127.17 is
configured as a DNS server. If 59.144.127.17 is
a public DNS server then please add it as a forwarder.
Once done, run ipconfig /registerdns and restart netlogon service on the DC.
Windows
IP Configuration
Host Name . . . . . . . . . . . . : MYLYC
Primary Dns Suffix . . . . . . . : ow.pearl
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ow.pearl
Ethernet
adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT De
Physical Address. . . . . . . . . : 08-00-27-43-C7-47
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::781f:3c7d:edc:684
IPv4 Address. . . . . . . . . . . : 192.168.1.105(Preferred
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 235405351
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-7A-16-5B
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Enabled
Please delete the second DNS server.
Also, disable all security softwares and try again.
Are you able to ping the DC? If not, that may be a problem with your routes.
Also, use nslookup to check that all is okay with DNS records.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator

Issues installing Virtual box VirtualBox-4.1-4.1.2_73507_rhel5-1.x86_64.rpm

Similar Messages

Maybe you are looking for