Issues installing vs 7 -System Registry
I eventually deleted all quick time files and attempts at installing vs 7 and successfully reinstalled quicktime - follow deletion of "temp" files instruction.
Did clean-up and new download when install gets to "System Registry" receive "Could not write value to Key\Software\Classes\.rmp\OpenWithList|iTunes.exe.
Verify access as administrator (which I am)
Wll not allow ignore only abort.
I am getting very frustrated with this. My son gave me the ipod and I am trying!!!!!!! ANY IDEAS WILL BE APPRECIATED.
Dell Desktop Windows XP
It's not okay also bcos i extracted p2go 6.0 and i find custom.ini but I can't find your issue.
I found this...
[Power2Go]
BU=CLT
RunExpress=1
Vender=CyberLink
Company=CyberLink
ProductName=Power2Go
Silent=0
WorkDir=1
runreadme=1
CLJ=0
NCR=0
CLDMA=0
EULA=1
DesktopIcon=1
ExpressSC=1
ADO=0
AEO=0
M2VO=0
M3UO=0
MAEO=0
TimeCode=Str:2009/09/02
ComboType=NA
SupportLanguage=Chs;Enu;Fra;Deu;Ita;Cht;Jpn;Kor;Esp
DriveDetection=0
CNTBD=0
ScUninstallIcon=0
So, how can I do?
Thanks... I'll wait your reply
Similar Messages
-
Whereis the Location of the EPM System Registry !!!!
I have complete the .3 install and config of essbase and Planning completely set planing, made a snapshot of my VMware system and shut down the server
this morning logon to my Laptop Started EPM system
and now my Essbase Administation Server
EPM System Registry configuration.r / Localhost:900 = Stopped
I Restarted my EPMSystem then
stop and started Essbase Administation Server
but it is stated it was stopped
went to
Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase/Essbase
[Wed Jan 08 06:39:17 2014]Local/ESSBASE0///6996/Error(1051683)
Attempt to retrieve connection information from the registry failed. Please check reg.properties file and try again.
and
COracle\Middleware\user_projects\epmsystem1\diagnostics\logs\essbase\essbase/Essbase_odl
[2014-01-08T06:39:17.203-05:00] [EPMCSS] [ERROR] [EPMCSS-00001] [oracle.EPMCSS.CSS] [tid: 10] [ecid: disabled,0] [SRC_CLASS: com.hyperion.css.registry.RegistryManager] [SRC_METHOD: RegistryManager] Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
LOOK AS IF THERE IS A ISSUE WITH THE EPM System Registry
Oracle EPM System
Diagnostics
everything Failed ??
Hyperion Foundation
FAILED Audit Validating that Audit has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED CES Validating that CES has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Web Server: Pending
Configure Database: Pending
Configure: Pending
Configure Common Settings: Pending
Configure Oracle Configuration Manager: Pending
0 seconds
FAILED CSS Validating that CSS has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED EXT: External Authentication Checker execution failed.
Error: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.
Recommended Action: Refer to the validation logs for exception details.
8 seconds
FAILED HUB Validating that HUB has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
PASSED WEB: Permissions All HIT entries are present in system-jazn-data.xml
0 seconds
FAILED LCM Validating that LCM has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED Single Sign-On Checker execution failed.
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
2 seconds
FAILED LNK: Registry Checking that all components in the registry have a link to host
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
0 seconds
PASSED CFG: Environment Checking whether system path variable length exceeds 2,000
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component SHARED_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED Registry Validating that Registry has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
EPM System Registry
Essbase / Essbase
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Server: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Administration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_ADMINISTRATION_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Integration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Integration Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_INTEGRATION_SERVER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Studio
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_STUDIO_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Provider Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Calculation Manager
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component CALC_MANAGER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Performance Management Architect
FAILED AppMgrLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Create EPMA Virtual Directory: Pending
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED DimEditorLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumApplications Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumDataSyncs Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED EnumDimensions Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
9 seconds
FAILED PMAJ: EPMA Service Validating whether jobmanager service is available.
Error: EPMVLD-01006: The EPMA service is not available. Check the log files for details.
Recommended Action: Check that the server is running.
0 seconds
FAILED DSC: EPMA DimensionServer Server Configuration Validating EPMA Dimension Server hyperion-bpma-server startup... Failed...
Error: Dimension server was not found in Shared Services Registry.
Recommended Action: Check application is started.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component EPMA_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Workspace
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component WORKSPACE was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
PASSED REG: Registry All links are present in the registry.
0 seconds
Planning
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component PLANNING_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Test start time: 01/08/2014 07:07 AM
Test end time: 01/08/2014 07:08 AM
Total test duration: 87 seconds
Please advise
ThanksJohn it happen again
so i look at the Oracle Database Instance and it is up ?????
Database Instance: ORCL
Page RefreshedJan 9, 2014 3:18:20 PM ESTView DataManuallyAutomatically (15 sec)Automatically (60 sec)
General
Status Up
Up Since Jan 9, 2014 1:18:26 PM EST
Instance Name orcl
Version 11.2.0.1.0
Host localhost
Listener LISTENER_localhost
Please advise -
10g client install -- "Error in accessing system registry"
Yes, I am the administrator - there is just one account on my machine and it is me.
I am attempting to install 10g client in hopes of fixing another problem. Everything is a problem it seems.
When I launch setup.exe I get ...
"Error in accessing system registry. You may not have enough permissions to modify registry. Installation cannot continue."
My environment is ... Windows 7 Pro, I do have an Oracle Express Edition installed but since I am having a 32-bit vs. 64-bit issue with an app I am developing in C# 2008 Express, I thought I would try installing the 64-bit 10g standard edition client.I didn't know this about Windows 7...
http://www.blogsdna.com/2168/windows-7-how-to-open-elevated-command-prompt-with-administrator-privileges.htm
I had to open a command prompt with Administrator privileges. I was tipped off by your link which had paragraph 1.4 Managing User Accounts with User Account Control and states,
To ensure that only trusted applications run on your computer, Windows Vista, Windows Server 2008, Windows Server 2008 R2, and Windows 7 provide User Account Control. If you have enabled this security feature, then, depending on how you have configured it, Oracle Universal Installer prompts you for either your consent or your credentials when installing Oracle Database. Provide either the consent or your Windows Administrator credentials as appropriate.
You must have Administrator privileges to run some Oracle tools, such as Database Configuration Assistant, Net Configuration Assistant, and OPatch, or to run any tool or application that writes to any directory within the Oracle home. If User Account Control is enabled, and you are logged in as the local Administrator, then you can successfully run each of these commands in the usual way. However, if you are logged in as "a member of the Administrator group," then you must explicitly invoke these tasks with Windows Administrator privileges. All the Oracle shortcuts that require Administrator privileges will be invoked as "Administrator" automatically when you click the shortcuts. However, if you run the above tools from a Windows command prompt, you must run them from an Administrator command prompt. OPatch does not have a shortcut and has to be run from an Administrator command prompt.
I followed the instructions concerning the elevated command prompt and then tried the Oracle 10g standard edition client install. I got past the registry problem but then I ran into a Universal Installer 10.2 problem. A window popped up stating, "Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:"
"Unknown"
"Unknown"
"Unknown"
Maybe that is due to 10g not being supported on Windows 7. So NOW I will try 11gR2. :-) -
Issue installing System Update 5.01
Hello all I am having an issue installing System update 5.01. I looked in the logs within the temp directory and it says error 1602 which is user canceled. However, I am not canceling the install. I also tried http://support.microsoft.com/mats/Program_Install_and_Uninstall that didn't work either.
I'm on a T420 with Windows 7 64bit.
Any ideas?
Thanks for your timeI had similar issues installing 5.01. I believe there is something wrong with the package. Here is how I fixed it:
Download installer from http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
Extract package with 7zip
Copy "Lenovo System Update.msi" to "System Update.msi"
Run setup.exe
For some reason the installer was looking for this file and it wasn't there, perhaps running the installer in silent/unattended mode caused it to exit with the code you mentioned.
I hope this fixes your problem too! -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
Need help: Cannot find Microsoft Word installed on your system.
I am having issues trying to generate a pdf from a robohelp 7 html project. Whenever I try to generate a pdf I get the error "Cannot find Microsoft Word installed on your system."
I have tried to uninstall both Office (2003) and robohelp, re-installing office first and then robohelp, but it doesn't help. Can anyone shed some light on this issue?Colum,
Thanks for the reply, but it's Microsoft Office, not Open Office.
I have read many threads here and tried most of the suggestions, up to and including:
Uninstall/Reinstall of Office and RH 7
Adjusting Macro security
comparing registry entries
There are others but I can't think of them all right now. Point being, nothing has worked thus far. I must admit this is fairly frustrating but I haven't given up yet. Any more suggestions are welcome, and I will review the link you gave me just to make sure I cover all my bases. -
DM 4.5, software issues message "Cannot find system in table file"
Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684Hi and welcome to the forums!
These procedures do work, and are not very hard.
A lot of users have dealt successfully with it.
Here is the Knowledgebase article:
Let us know if you need some help or explanations.
OK?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
Cannot find table in system file
CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
Resolution
To resolve this issue, complete the following steps:
Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
If the Connectors folder is present, complete the tasks listed below.
Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
Open a command prompt.
Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
Task 2 - Register the most current Microsoft Outlook connector
Open a command prompt.
Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
How to get list of software installed in a system
How to get list of softwares installed in a system?. should i use registry to get information or control panel?
is there any package available for this? how should i start with/
thanksHow to get list of softwares installed in a system?.Using native code, if at all.
should i use registry to get information or control panel?Linux has neither.
is there any package available for this? how should i start with/ Learn the Windows API or Google for some native tool. -
Issue installing/upgrading to ITunes 10.6.1.7
Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
VMWARE Server2012RT Installation failed with option: I will install the Operating System later
Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspxOk. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx -
HI
in my sharepoint farm has
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Arabic العربية
Microsoft SharePoint Server 2010
installed
is any service pack 2 there for language packs for arabic as i installed service pack 2 sharepoint 2010
sucessfully
and after i go to apply dec 2013 CU it is not installed
it thrown a messege the expected version of the product not installed on the system
dec 2013 cu in sharepoint 2010
current sharepoint farm has below
adilHi,please find the below URL that exactly talking about the issue.
http://expertsharepoint.blogspot.de/2013/10/the-excepted-version-of-product-was-not.html
Find the detailed installation of of CUs in Post categories on blog
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
My Duaghter is out of the country studing abroad. Her PC would no longer boot up so she took it to a support shop. They replaced her hard drive, fixed an over heating issue and reloaded her PC. Now she is getting this new error message and she is desparate to get this fixed. We have owned this PC for only 2 years. I am sure it is out of support.
HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system on your hard disk.
She took it back to the support shop and they upgraded her bios, but that did not fix the error message.
Please help! What can she do now.Hi:
Normally that means the hard drive failed.
I know it was replaced but maybe the replacement drive went out too.
There is a hard drive diagostics tool your daughter can run in the BIOS.
I suggest she run it (enter the BIOS by tapping the F10 key as soon as she sees the HP welcome screen).
Then once in the BIOS, there should be a diagnostics menu..one for memory and one for the hard drive.
She should select the hard drive diagnostics application and see what it reports.
Then go from there based on what is reported.
Paul -
My lap top says boot device not found please install an operating system on your hard disk
I was on yahoo and page froze. I hit alt/ctrl/delete and nothing happened. I then hit ctrl/esc. I now have a screen saying boot device not found. please install an operating system on your hard disk. hard disk (3FO) What did I do wrong? this is a Compaq presario CQ56-112 NR Notebook Windows 7
This question was solved.
View Solution.I would suggest going to the following link and going through the listed troubleshooting steps based on your symptoms:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue. -
BOOT DEVICE NOT FOUND - PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DRIVE
HP G6-2212SA LAPTOP ( 2 YEARS OLD) BLACK - WINDOWS 8
I HAVE RUN THE MEMORY TEST PASSED
RUN THE HARD DISK QUICK CHECK - PASSED
RUN HARD DISK EXTENSIVE TEST - PASSED
I HAVE BOUGHT A NEW HARD DRIVE, INSTALLED IT AND RUN ALL THE SAME TESTS WITH ALL THE SAME PASSED RESULTS. I BELIEVE THAT THE PROBLEM IS NOT THE HARD DRIVE, SO I HAVE TAKEN THE NEW ONE OUT AND PUT THE OLD ONE BACK IN, AND HOPEFULLY BE ABLE TO GET A REFUND IF I SEND IT BACK.
I HAVE FOLL0WED INSTRUCTIONS ON THIS FORUM TRIED MOST THINGS STILL GET THE SAME MESSAGE.
I HAVE BOUGHT A WINDOWS 8 RECOVERY DISK OFF EBAY, TRIED IT SEVERAL TIMES AND DIFFERENT WAYS BUT WILL NOT LOAD UP
PLEASE HELP AND ADVISE AS IM IN A DELEMA
DARRENHi @Darren104
Welcome to the HP Support Community. I saw your post regarding the Boot Device not Found error message. This HP document Resolve Boot Device not Found Error Message will show you how to reset your BIOS. This will force the BIOS the look at the hardware and it might see your new hard drive. Another reason that it might not be seeing the hard drive is because there is no bootable operating system on the hard drive. You might need to look at taking it out and installing an operating system on it via another computer.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Hey
i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
Error Message only shows up when I disable the Leglacy mode.
So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
Laptop Model : HP Envy Dv6-7211tx
Hard Drive : 1Tb and 32GB SSDHi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx. I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document. http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463
If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP
Maybe you are looking for
-
SAPScript - To break a line in two
Hello Experts, I am using an standard text, where I need to display email in the right side. If email is 20 char, it comes normally, but if its longer then it wont come. Please suggest. &V_SMTP_ADDR1& - char(20) &V_SMTP_ADDR2& - rest part(221 char) W
-
Control button inside movieclip with AS
If I got a mc with a button inside, how do write the script to control that button from the main timeline? My script (that doesn't work) looks like this: mymovieclip.mybutton.onRelease = function() { gotoAndStop(2);
-
pad stopped working and screen just went black!
-
I've read through most relating topic and found that there's actually no way(except you write it all) to ignore the white space if you don't have a DTD. Saying that without DTD , the parser has no way to know if the white spaces are significant. Well
-
HT204023 Connect to iPad 2 3G with iMac
Hi all, I have an iPad 2 3g with a lot of data, and no DSL line at the moment. Is there any way in which I could "create a hotspot" with my iPad, so that I can also connect to the internet using my iMac?