Issues Installing Windows 7 Pro x64 on latest MBPR

I purchased two MBP Retinas yesterday. One with a 256 SSD and one with a 512. Other than that, no difference. I started up the 512 and created
my bootcamp windows 7 installer with the latest image from MSDN. Tried to install and the windows installer hung at 65% for more than 4 hours.
I then opened the second MBP, fired up bootcamp installed from the same usb stick that i created before and it was up and running in 15 minutes.
I've spent nearly 4 hours now researching the problem only to come up with conflicting information and no dice on any solution. Even tried loading the OS without bootcamp using the drivers needed for the disk controller and still, 65%... is all i get. Anyone had this problem? Keep in mind, I've used bootcamp since its inception and also have tried every combo of the available fixes out there. Did I just get a lemon?

From the OS X side, in the Bootcamp volume, you can see the Windows Installer log. Please check if you can. For clarification, are the rMBPs the current models or are they older?
1. cd /Volumes/BOOTCAMP/Windows/Panther
2. Look at setupact.log and setuperr.log
Here is an example of the header of setupact.log...
2014-02-10 01:55:57, Info                  IBS    InstallWindows:Successfully loaded resource language [en-US]
2014-02-10 01:55:57, Info       [0x0601c1] IBS    InstallWindows:Install Path = X:\Sources
2014-02-10 01:55:57, Info       [0x0601c2] IBS    InstallWindows:Setup Phase = 2
2014-02-10 01:55:57, Info       [0x0601e9] IBS    CheckWinPEVersion:Compatible WinPE Version 6.1.7600 sp 0.0
2014-02-10 01:55:57, Info       [0x0601c9] IBS    InstallWindows:Starting a new install from WinPE
2014-02-10 01:55:57, Info                  IBS    InstallWindows: Setup working directory = X:\windows\panther
2014-02-10 01:55:57, Info       [0x0601ce] IBS    Setup has started phase 2 at 2014-02-10 01:55:57
2014-02-10 01:55:57, Info       [0x0601cf] IBS    Install source is X:\Sources
2014-02-10 01:55:57, Info       [0x0601d0] IBS    Build version is 6.1.7600.16385 (win7_rtm.090713-1255)
2014-02-10 01:55:57, Info       [0x06403f] IBSLIB CreateSetupBlackboard:Creating a new persistent blackboard. Path is [X:\windows\panther\SetupInfo] Setup phase is [2]
2014-02-10 01:55:57, Info       [0x090008] PANTHR CBlackboard::Open: X:\windows\panther\SetupInfo succeeded.
2014-02-10 01:55:57, Info       [0x064043] IBSLIB CreateSetupBlackboard:Successfully created/opened Setup black board path is [X:\windows\panther\SetupInfo]
2014-02-10 01:55:57, Info                  IBS    InstallWindows:No UI language from a previous boot was found on the blackboard. Using selected language [en-US].
2014-02-10 01:55:57, Info                  IBS    InstallWindows:Setup architecture is [x64]

Similar Messages

Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD

Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbperson

You don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media.

Hard Drive Failed, issue installing windows 7 pro

Hi all, and thanks for the help. So, I have this HP computer that crashed. Unfortunetly I wasn't correctly running backups and something happened to the hard drive. So, I wiped it clean.....
I never had a Windows 7 Pro install disk. So when I went to reinstall Windows I only had a Windows 7 home disc to get it started up. Now that it's up and running, the Windows 7 pro serial number (attached to the tower) will not work to validate Windows as I have Home edition installed under trial right now.
Is there a way to get another install disk, or is there a correct way to reinstall Windows 7 pro with the serial number that I have so that I don't have to purchase another Windows serial?
I tried using Microsoft's windows recovery tool, but because this was an OEM installed product it said to contact HP?
Thanks for the help.

Hi:
You can try this trick to turn the files on your W7 Home Premium disk to any version of W7.
http://www.mydigitallife.info/how-to-select-any-edition-or-version-sku-of-windows-7-to-install-from-...
You can also download the free ImageBurn software (another program in addition to those listed in step 1) to create and burn the ISO file you created by following the info above.
http://imgburn.com/
Otherwise you will have to order a set of W7 Pro recovery disks for your specific model PC from HP.

Windows XP Pro x64 problem with hardware aud

I just upgraded my computer and with this upgrade I installed Windows XP Pro x64. I am having the following symptoms and I am wondering if they aren't part of a larger problem.
When I run DXDiag (either the 32 or 64bit version) I get the following error message during the tests on the Sound tab: "Your sound card does not support hardware buffering. Sounds will only play back from software buffers.". Is this normal for Windows XP Pro x64. I've used this OS before (with my older system) and never saw that message and used 2 different X-Fi cards during that time!
I also have this problem...While running Thief Deadly Shadows, when I enable "Audio Hardware Mixing" I loose all sound. And I am unable to enable "EAX Advanced HD" and "EAX Multiple Environments".
It seems like I can't enable hardware audio. But I also have Lord of The Rings Online installed and it appears to be using it's hardware audio ok, but when I change from hardware to software it crashes if I don't disable EAX first, so it's not perfect. Is this card faulty or is this typical of WXPx64 or what?
Thanks...
My system specs are: Intel E6850, Asus P5K Deluxe (0404 BIOS), Corsair Twin2X4096-6400DHX, EVGA e-Geforce 8800 GTX, Creative X-Fi Elite Pro, Intel PRO/000 PT Server Adapter, Enermax Galaxy 000W Gamers Edition. I think that's all that's relevant.Message Edited by Zapper_Weisman on 07-27-20070:2 AM

I disabled the Memory Remap Feature in the BIOS and my DXDiag and Thief problems went away. I had a hunch it was related to this. But now my question is, am I just out of luck, in terms of having to sacrifice some of my RAM (3.25GBs instead of 4GBs) to get my sound card working properly? It seems to me that this is a driver issue, as I've read others say that Creative never really supported x64 fully.
Does anyone have anything to offer on this? Thanks...Message Edited by Zapper_Weisman on 07-27-20070:22 AM

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

ACPI\VPC2004 Unknown Device - Lenovo g560 windows 7 pro. x64 installed

I just bought Lenovo g560. And installed windows 7 pro. x64 and installed drivers from driver cd shipped with laptop (windows 7 drivers). After installed all drivers still I had one device unknown ; device id = Acpi\Vpc2004. In the Windows 7 solution center, there was message about download energycut and install. I downloaded and install energycut. But nothing changed and power management option program not working too.
I googled so much and couldn't find any solution.
+++
Actually there very interesting situation, there is any driver or support about lenovo g560 on lenovo global support site. And auto detect is not working too.
Did I made mistake to buy lenovo instead of thinkpad???
If somebody have solution about this acpi\vpn2004 driver please help.
Because like that when sleep or lid laptop not waking up.
After hibernate and start computer, having blue screen and system halted message. until start without resume system.
Solved!
Go to Solution.

I googled this: "ACPI\VPC2004 Unknown Device"
Third hit was THIS at another Lenovo forum.
Is this your solution?

Unable to install Windows 7 Pro SP1 x64

Hi guys,
I have a Dell all in one 2310 and Dell had came out to replace the HDD as it was faulty, now when I try to install Windows 7 Pro SP1 onto the unit it comes up with "Windows cannot be installed to this disk. This computers hardware may not support booting
to this disk. Ensure that the disks controller is enabled in the computer's BIOS menu.
I have checked in the BIOS and the settings seem ok as in the SATA drives are enabled and on AHCI..
When using diskpart to list the volumes it also cannot see the drive,
HELP!!

As Rick Dee says, the issue is with the hardware and not related to Windows. Moreover, SATA is in AHCI mode, so more information is needed. It's better to contact Dell technical support, as said by Rick Dee, so that it'll be solved as soon as possible.
The new hard drive may also be replaced, if the situation worsens. Additionally, if the PC is under warranty, Dell technician will assist you in installation of Windows.
Balaji Kundalam

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?

I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request

Hello Microsoft Community,
I'm trying to install the following:
Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card
Name: ORiNOCO Wireless PCI Network Card
Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7.
Problem: None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded.
[Please note I've tried the following and had no success: 4.2_JP2_Vista , 4.2_Vista , 4.2_whql , ORiNOCO_v31219 , V2.2.0 software , wpn311_2_0_setup]
I have submitted the following to Proxim Tech Support :
Support Request Submitted: 20284
Thank you! Your support request has been submitted and one of our technical support members will be in touch shortly.
Details
Subject
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
ServPak Reference
Description
Hello Proxim Tech Support, Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Name: ORiNOCO Wireless PCI Network Card Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7. Problem:
None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded. Thanks, Kent C.
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
I will update thread with their reply as nothing, even Driver Genius Professional 11 has located the actual working driver. Once an update is verified, I will post back to this thread since I couldn't find the right answer online.
THIS BTW I TESTED IS INCORRECT [You may verify if you don't believe such] :
http://www.experts-exchange.com/Software/System_Utilities/Q_26292317.html <- That didn't work [Found driver online via Google] and link isn't working anymore in that post.
This is related to this thread here:
https://social.technet.microsoft.com/Forums/windows/en-US/668ac1f0-4560-4bd3-8848-c4fcdc70c10a/wanted-atheros-driver-for-windows-7-x64?forum=w7itprohardware
Any assistance would be appreciated! Thanks..
Kent C.

Hi,
About this issue, you need conatct proxim support to confirm if it could works fine in WIndows 7 platform and how to get the proper driver package.
Karen Hu
TechNet Community Support

Oracle XE 11g x64 does not run. No *DBF files inside of the XE folder. Windows 7 Pro x64.

Hello everyone!
I hope you are doing well all. In my case I have some troubles by installing Oracle XE 11g on my PC. My OS is Windows 7 Pro x64.
1. I activated the Administrator mode on my PC (net user Administrator /active:yes)
2. Started the setup as Administrator. The setup process was finished successfully with no errors showed.
3. Started the Database, OracleServiceXE, OracleXETNListener and other services.
4. Tried to connect using sqlplus-> connect system ->password, what in result gave me ORA-01034 Oracle not available and ORA-27101 Shared memory realm does not exist errors.
5. Then I recognized that my C:\oraclexe\app\oracle\oradata\XE folder is empty when it should be usually full with 6 DBF file.
6. I opened the cloneDBCreation.log and it contains these data:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-12560: TNS:protocol adapter error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-12560: TNS:protocol adapter error
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> alter system switch logfile;
SP2-0640: Not connected
SQL> alter system checkpoint;
SP2-0640: Not connected
SQL> alter database drop logfile group 3;
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12560: TNS:protocol adapter error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\postScripts.log
I spent around 2 days to come to this reason and now I do not know what to do next.
My actions to resolve this problem:
1. Checked if my user has administrative rights and belongs to ora_dba. It does!
2. Turned Microsoft UAC off.
3. Set the system and local variables of ORACLE_BASE, ORACLE_HOME, ORACLE_SID, PATH, TNS-ADMIN to the appropriate values in Enivornment Variables:
     - ORACLE_BASE -> C:\oraclexe
     - ORACLE_HOME -> %ORACLE_BASE%\app\oracle\product\11.2.0\server
     - ORACLE_SID -> XE
     - Added to PATH -> C:\oraclexe\app\oracle\product\11.2.0\server\bin;
     - TNS_ADMIN -> %ORACLE_HOME%\network\admin
4. Removed Oracle XE 11g and reinstalled to another drive. No sense!
Some more errors:
1. C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Ein Mitglied konnte in der lokalen Gruppe nicht hinzugefugt oder entfernt werden, da das Mitglied nicht vorhanden ist.
It means -> O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
I understand that I need to logon as batch job. I added me to this policy in User Rights Assignments, but still I get these "DIM-00019: create service error" and "O/S-Error: (OS 1387)". And I guess just therefore my database is not starting well.
2. 127.0.0.1:8080/apex/f?p=4950 is not starting in browser. It is probably because the database is not running appropriately. For this issue have already seen one topic in Google that the HTTP Properties inside the Listener Status must be set to 8080 to make this link work. But in my case I do not see this line in my Listener Status:
Some other information relevant to the issue:
1) echo %USERNAME% - Administrator
     echo %USERDOMAIN% - ildar-PC
2) Listener.log:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
3) Tnsnames.log
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
4) Sqlnet.log:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
5) While connecting by sqlplus, I get this errors/messages:
6) Confirmation that I've got admin rights and I am in ORA_DBA:
If u need some more information from me, please let me know!!
Guys please help me to solve this issue, 'cause I've almost got frustrated to find out the solution of this problem. Thank you beforehand!!
Kind regards,
ildar

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

Windows 7 pro x64 and palm centro

I'm running windows 7 pro X64 and the software installed just fine, but not the driver. Does Palm have any plans for a solution? Are there any third party drivers that will solve my problem without having to install a bluetooth device on my pc?
Post relates to: Centro (Verizon)

Hello rpiquette, Welcome to the Palm Support Community!
Palm has moved away from their legacy operating system (PalmOS) and on to a new one called webOS. Since Palm Inc. doesn't even own their own software anymore (Palm Desktop) I'd seriously doubt any further support will be forthcoming for Win7, especially for 64-bit architecture.
Palm Inc. has historically not divulged any "future plans" for software (or hardware). Will a third-party develop a desktop client? I have no idea at this point, but the opportunity certainly exists!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can't connect to shared printer on Windows 7 Pro x64

I have a print server on Windows 2008 Standard and I have drivers installed for both x86 and x64 archs. The ricoh printer seems to work fine on windows 7 pro x64 but the hp printer will not work correctly. It seems to download/install the drivers but when actually connecting to the printer it errors out.
It says cannot connect to printer.
I can add the printer manually if I use tcp/ip printing instead of connecting to the shared printer. I can't figure out why its not working. Has anyone else seen an error like this? I'm not really sure what is causing this issue.
Thanks!

Hi,
Thanks for the post.
Please also let us know the exact model of this HP printer.
If possible, please reproduce this issue on the Windows7 client and collect the relevant information for further research.
Step 1: Download Process Monitor
======================
1. Please download the Process Monitor at http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
2. Extract the zip file to Desktop.
Step 2: Clean Boot
=============
Let's disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1. Click "Start", go to "Run", and type "msconfig" (without the quotation marks) in the open box to start the System Configuration Utility.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Click "OK" to restart your computer to Selective Startup environment.
5. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
6. Check whether or not the issue still appears in this environment.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We may still manually run these programs later.
Step 3: Collect the Information
=====================
1. Open Procmon.exe (Process Monitor).
2. Reproduce this issue.
3. After that, please click Capture in the tool bar (or directly press Ctrl+E) in Process Monitor.
4. Click Save, in the prompt window, selects “All Events”.
5. Click Browser Button (The button is right to “Path”), in the prompt window, click Desktop, type “test” (without the quotation marks) in the File Name box and press Enter.
6. Find the file, right-click on this file, click "Send To", and click "Compressed (zipped) Folder".
For your convenience, I have created a workspace for you. You can upload the information files to the following link. (Please choose "Send Files to Microsoft")
Workspace URL: (https://sftasia.one.microsoft.com/choosetransfer.aspx?key=7f161e43-e9d9-4654-9077-88c9f57137c6)
Password: YK]yhkqqV0L
Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text between '(' and ')' when typing or copying the workspace link into your browser.
Hope this helps.

W520 hangs on Windows 7 Pro x64 installation, cannot boot live CD

Hi Everyone!
I decided to reach out to the community for some intelligence that I have not been able to obtain elsewhere. Here's my story in details in case someone can find a break on any of them ...
I purchased my W520 in November, 2011 with 1 year warranty and used it without issues until last week. One morning when I started the laptop, it loaded Windows 7 Pro x64, I logged in. After loading the desktop, I locked the screen/user and stepped out for a minute. When I came back, the screen was frozen and after a few minutes of waiting I manually powered off the laptop.
Upon restart, Windows 7 would hang on the logo screen and restart in a few minutes. I was able to restart under Safe Mode, however, which enabled me to create the rescue DVD's.
I decided to re-install the OS, but the installation would hang on the Windows logo screen again. This was also attempted with all accessories (usb kbd, usb wireless mouse, and display I also tried w/o the battery) disconnected. Then I thought, that it could be a bad hdd - I tried installing XP Pro but got the BSOD with a bad hdd error code. At that point, I attached the hdd to a working PC and ran checkdisk which found no errors. The problem persisted even with unpartitioned disk and a spare hdd that I had on hand. What intrigued me was that no linux live CD could load (it would freeze on the loading screen).
After this, I flashed the BIOS to the newest version without any issues during the flash process. The Windows 7 Pro x64 installation would hang again at the usual logo screen. I also tried with different DVD source... Memtest did not show any problems either.
Then I called an IT support guy who was not experienced with the issue and took the laptop for bench testing, and after four days of back and forth the IT company was inconclusive that the issues is most likely caused by a bad BIOS.
This happened around March 21, 2013 after Windows 7 installed updates (not sure if this could be related). The weird part is that the W520 worked fine for a year and four months and when it crashed I was able to use Safe Mode, access and flash BIOS, but was unable to run new installation or live CD's.
Is there anything that I am missing? Has anyone had the same experience? What is the conclusion according to you - it is really bad BIOS chip or just a UEFI-related setting?
Thanks for reading and trying to help!
Configuration:
Processor
Intel Core i7-2620M Processor (2.70GHz, 4MB L3)
Operating system
Genuine Windows 7 Professional 64
Operating system language
Genuine Windows 7 Professional 64 English
Display type
15.6" HD+ (1600 x 900) LED Backlit Anti-Glare Display, Mobile Broadband Ready
System graphics
NVIDIA Quadro 1000M Graphics with 2GB DDR3 Memory
Total memory
4 GB DDR3 - 1333MHz (1 DIMM)
Keyboard
Keyboard US English
Pointing device
UltraNav with TrackPoint & touchpad plus Fingerprint reader
Camera
720p Camera
Storage subsystem
Internal RAID - Not Enabled
Hard drive
500 GB Hard Disk Drive, 7200rpm
Optical device
DVD recordable multiburner
System expansion slots
Express Card Slot & 4 in 1 Card Reader
Battery
9 cell Li-Ion Battery - 55++
Power cord
Country Pack North America with Line cord & 170W AC adapter
Integrated WiFi wireless LAN adapters
Intel Centrino Advanced-N + WiMAX 6250
Integrated mobile broadband
Integrated Mobile Broadband - Upgradable
Language pack
Language Pack US English
Fingerprint Reader

Sir:
I'm not entirely sure what you mean when you write "BIOS v1.40 settings that will make it possible to install Windows 7 Pro 64", but, you can download the 1.40 BIOS (which appears to be the most recent release) from this link: Device Driver File Matrix - W520 , and if you have any concerns about the BIOS settings not being appropriate, just enter the BIOS setup manager (tap the F1 key repeatedly when the laptop is booting) and select 'revert to defaults' or similar.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Issues Installing Windows 7 Pro x64 on latest MBPR

Similar Messages

Maybe you are looking for