Issues joining my home wireless network

Issues joining home wireless network
My router is a Thomson 585 using encryption WPA-PSK when I try to connect with my ipod is unable to join the network; however the ipod will join when I disable the encryption on the router. So I try to set up my Ipod and it shows my router so in goes the 8 digit wireless pin but it will not connect. How do I set the encryption on my Ipod so it is the same as my router?
The only way to see encryption is on other networks but that is not the my Thomson network or is it?
Help

Passwords are case sensitive so be careful. Also, if you are using WEP (poor choice BTW), you cannot use a password unless you follow some pretty stringent rules. The best alternative for WEP is the hex key generated by the router.

Similar Messages

Unable to join home wireless network

One of my iPhones wont join my home wireless network. Keeps saying password is incorrect. Two other iPhones, 3 iPads, laptop all join no problem. Tried resetting wireless settings, did not work.

I'm having the same problem, but I have an iPhone 4 and mine won't connect to any network. It always says "unable to connect to network". I looked through all of the support forums but all I can find are people saying that its the firmware and that Apple has to fix it in an update or have to switch it out, and my warranty has expired. All of those forums are also from 2009. I don't want to pay for unlimited Internet, so I new this to be fixed. Please help if you at all possibly can.

HT1695 I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now?

I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now? This is the only wifi network I have...

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Does my time capsule HAVE to join my existing wireless network please?

ok i am trying to get my TC to join my wireless network but its not having it!!
(it was but now i cant seem to get it to work)
so my question is....can i just have its as its own separate wireless network just to talk with my macbook & imac so they can back up wirelessly please?
or would this cause problems as they are on my personal home wireless network??
anyone know please?
thanks!

so my question is....can i just have its as its own separate wireless network just to talk with my macbook & imac so they can back up wirelessly please?
You can do, but you don't need to.
If you create a separate WLAN for your Time Capsule then you'll need to switch your clients to the TC WLAN to make their backups, then switch them back to the regular LAN when they're done. Bear in mind that your regular WLAN (and, presumably your internet access, etc.) will be unavailable while you're switch to the other WLAN.
There has to be a better way, surely? Of course. If your existing WLAN is working well enough for you, then just connect the TimeCapsule to your existing network via an ethernet cable. Now it will be part of your LAN, all your clients can see it and back up to it, but you don't have any issues with having to switch AirPort networks on the client (in effect, your client sends its data wirelessly to your existing base station which then forwards the data over the ethernet LAN. Problem solved.

MacBook can't see my home wireless network after upgrade to OSX 10.8.5

After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

It appears an SMC reset was required:
HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

MacBook Pro Can't find home wireless network

I've been having some issues getting my macbook pro, running OS 10.7.5, to find my home wireless network. The network doesn't show up when it searches automatically, and when I type the network name in to find it manually, it says no network found. The computer connects to all other networks and finds then with no issues, and other MacBooks are able to find my home network and connect to it again with no issues.
The computer used to be able to find the network, and then it just stopped working. I have tried all the standard fixes, resetting the router, computer, PRAM, forgetting the network, deleting the key from keychain, but nothing seems to work. I tried googling the issue, but wasn't able to find a problem similar to the one I have.
Any advice would be greatly appreciated.
Thanks

Still having problems with this.
I have upgraded to Mavericks, hoping that the problem would be fixed, but it hasn't. I still get all networks completely disappearing - even if I search for them they are not found.
But I reboot the computer and it works! But when I am in OS or Bootcamp mode and put the Mac to sleep, it does not see the networks again! I have to reboot the computer for it to work.
I have even got a new router which can receive the b,g and n signals etc. as I was told by a Mac techie here that Macs 'look' for the n signal but can also work with the b and g signals and THAT maybe my old router only transmits b and g or something like that .
This, to me, sounds like a Mac software problem. I had a similar problem on a previous Mac on my "old router" and a totally different router in a different country's telephone system.
I now have the same problem with a new MBP on a new router!
Maz

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

Apple devices will no longer recognize home wireless network

After returning from a week's vacation, I am having difficulty getting my Apple devices (iPads, iPhones, MacBook Pros, etc.) to connect to our home wireless network. I have tried resetting the router and modem numerous times, restarting the devices, resetting the IP address on the MacBook Pro to no avail. At time I do show a connection to the network, however, I cannot access internet, email, etc. This problem also seems to be affecting ALL of our Apple devices, including the ones we left at home. The PC laptop connects just fine, so it does not seem to be a router issue. Any thoughts?

Have you called the ISP's tech support line and asked for help?

Strange - Home wireless network ok, no access Public networks

Ok, I'm not getting this, and I've been around computers for some time.
Got my B570 'round September last year. Worked great on home wireless network ( Brighthouse networks in Florida, with Ubee Wireless modem running Lightning or 40mb.)
Had to move to new place offering a house offering of wifi, had a bear getting that up, but finally did.
Here's the q, and I've seen this on an HP laptop running Vista, but that one died and I got this one.
Go to Starbucks, Panera's, Dennys or just about any other public place, and I can see the routers and even connect, but can't get anywhere on the internet. I get either a limited or no internet, or identifying, but that's it. I know that their router is working because i can make the wifi connection on my phone and browse no problem, and I see other patrons with different computers logged in at the same time.
McDonalds, I can get in, and soon as the network connection comes up, browser will pop up and allow me to accept McD's access rights page and I can connect. I know that Denny's has one too, but it doesnt pop up, and ( I know that this will sometimes happen too ) if I try to connect to a website, sometimes the local accept page will pop up, but usually not for me.
I have Google Chrome as my primary web browser, but even if I try to bring up via IE, no go.
I can connect to the internet via my droid phone usb wired or just wireless, but don't like that to be a regular solution.
I've already tried to update the wireless driver ( Broadcomm ), but computer tells me that i'm up to date. Enabled then re enabled. Flush DNS didn't help either, ipconfig / release and renew didn't do it either. Using Comodo Internet Security, and turned it off, even exited out of program and that didn't help either.
Today was an interesting day. went to Denny's thinking I'd get some work done, and couldn't get logged in. Went to Fedex Store to get some printing done, and logged in right away. Came home and can log into the communities public ( fee based ) network and can log right in. Looked in my bag and found a usb wifi dongle I had used for the HP when the wifi on it died out, but didn't try that yet. I'd rather not, I'd rather find out why the wifi on this laptop seems to be finiky with who's networks I'm using.
Any ideas would be appreciated.
Ron V.
Lenovo B570 - 4 G Ram, 500 G H/D
Windows 7 Home Premium 64b

hi Ronjie,
The issue you're facing is a very strange issue. From what i gather ist begging to choose the network it wants to work with. I may need more time to look inot his to see if it is a harware issue. But i would like to try something though. You may want to uncheck the IPV6 in ur Wireless network properties.
To do that you will have to go to your "Network sharing centre" > Click on "Change adapter settings" on the left hand panel > Highlight "Wireless network Connection" > Right Click "Wireless network Connection" and select on "Properties". Be sure to uncheck the "Internet protocol version 6 (TCP/IPV6)". Then click on and try to reconnect.
Let me know how it goes..
Regards

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

MacBook Pro only can't find home wireless network

Hey guys!
I purchased a 15" retina MacBook Pro by July. It brought Mac OS X Lion with it: I had no problems.
However, more than a month later I upgraded to Mountain Lion, and I started to have the same problem ALWAYS: sometimes I would be connected to my home wireless network, perfectly fine. However, after shutting down, sleeping, etc, whenever I would turn the Mac on again, it wouldn't find my home network wireless anymore, but it would find e.v.e.r.y and other network available. Also, my phone, iPad, and every other equipment, would find it and work perfectly. After several restarts and wake ups from sleeps, the Mac would eventually magically find it and stay connected for an unpredictable amount of times (sometimes it could find it continuously for some days after some sleeps, and sometimes it wouldn't be found again after some hours of it being found again (assuming the computer went to sleep)). But if I try any other of the available networks it connects with no issue!
And I've been in this game constantly! I've tried (almost) all the Mountain Lion wifi-related posts in the Internet, but none seems to solve it.
I have only found a few posts with my related issue, which I recall: the Mac won't find, ONLY, my home network, while any other equipment can, and it can magically find it occasionally, lasting its connection until the next sleep or shut down.
Help would be really appreciated.
Thank you,
Juan

Hum, good point, the problem may lay with the router compability. My sister, who has ML as original OS has been having the same problem of not finding only our home network, so it seems that the problem lies on Mountain Lion compatibility with the router. I just restarted the router several times and we both got internet at the same time. The question is, as always, how long will it last until it won't find it again.
Now, focusing on the router.
Here, in Portugal (as for the rest of the world I don't know), the Internet provider companeis offer their own modems. Not only that, as those modems are both: modems and routers ( http://imageshack.us/scaled/landing/149/ofibrasjaestaabombar.jpg ).
After writting the above, and re-reading what you said, you lighted me up the idea of entering the modem domain (you know, that url you put and have access to every definiton of the router?)
Well, the password "type" was selected to "WPA and WPA2". What I did was selecting "WPA2" only. So far it seems that it is working. I'll do some restart tests etc etc and I'll let you know! (Maybe the problem may persist, but I'll only know days from know as it may seem, for know, that it is solved.)
I'll let you know, and thanks for the help so far, Sig!

Can my older Airport Express 802.11g join an existing wireless network

I have a Airport Express 802.11g firmware version 6.3 . Using the most recent Airport Express Utility I can set it up as a base station on its own independent network but I cannot join it to my existing home wireless network. As I go through the wizard (or manual setup) It just does not detect/display any existing wireless networks. I have plenty of mobile devices in the house that can see the wireless network...and next doors network.
So, it begs the question ... is an 802.11g unit actually capable of joining another network or is this capability available on later models only. A search of apple support and the wider internet for "Airport Express 802.11g capabilities" yeilds a blizzard or useless info.
Thank you

Sorry, I cannot help on Windows since I do not have a Windows 7 machine here to test. I have used XP in the past and AirPort Utility appears to be virtually the same in Windows as a Mac. I assume that this is the case for AirPort Utility 5.6.1, and it should be able to configure the Express.
The older Express will join most wireless networks if the following conditions are met:
1) The Express is functioning correctly.
2) The wireless network name is 12 characters or less and it contains only normal letters and numbers. Avoiding blank spaces in the wireless network name will help improve the chances of the Express joining the network as well.
3) The wireless router is broadcasting a compatible signal that would allow the "g" Express to connect. If your network is broadcasting a wireless "n only" signal, the Express cannot connect to this network.
4) The wireless security on the network is set to a WPA compatible setting. That is because the older Express has difficulty joining 3rd party wireless networks using WPA2 Personal or WPA2-PSK-AES encryption. In other words, if your network is now using WPA2 Personal or WPA2-PSK-AES settings, the "g" Express will probably not be able to join the network.
5) If you are using MAC Address Filtering on your network, the MAC address of the Express will need to be included in your settings.
6) The wireless network password uses the same guidelines that appear in 2) above
The items noted above will provide the Express with the best chance of joining your network. Plan to use the Manual Setup option in AirPort Utility and be prepared to use the Option or Alt keys on the PC if needed.
If you are looking for a guarantee of success in advance for this task, I cannot provide that and you should wait for another user to post who might be able to meet your requirements in that regard.

New Airport Express - interfering with home wireless network?

I have an IMac and laptop PC both connected to a wireless home network. I plugged in the new Airport Express, and ran a Toslink cable to my home stereo. My intent is to stream music from the IMac.
When I plug in the AExp I get a flashing amber, then the green light, then flashing amber. I asked the AExp to "join" my network. Soon after the first green light the home wireless connection is unavailable to both my IMac and PC laptop. If I unplug the AExp then the laptop PC reconnects to the network. With the AExp unplugged I also must have "Turn On AirPort" on the IMac to have the internet status as "connected".
Basic problem: when I plug in the AExp both home computers disconnect from the home wireless network.
Any suggestions to getting the AExp to work within the home wireless network?

First, perform a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration.
Then take a look at the following steps to be sure that nothing was missed:
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless tab
Wireless Mode: Join a wireless network
Network Name: <existing wireless network name>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup > Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter the desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings ot the AX

IPAD WILL NOT JOIN PASSWORD GUARDED WIRELESS NETWORK

My ipad 2 will not join a password guarded Time Warner Cable home wireless network. The network is properly discovered yet I cannot get a password access box to appear. Suggestions please

What encryption is the router using?
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points

Home Wireless Network & Backup

Hello-
Can anyone suggest some helpful resources (e.g., websites) for configuring a home wireless network where different users (e.g., family members) can backup their files via the network instead of having to physically connect their computers to a separate, external drive? Thanks much.

The new Apple Airport Extreme wireless router provides for this - connecting an external USB drive to the router for saving data and/or for backup purposes by anyone with access to the wireless network.
http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2108.html

Issues joining my home wireless network

Similar Messages

Maybe you are looking for