Issues on iPad 2, with latest release of iOS 8.1.1

Having updated software today to the latest version I noticed an issue:
In Mail, the predictive text creates errors.
For example typing "ive" prompts with "I've" but when I press 'space bar' to accept, the result changes to, "II've", which is wrong and unacceptable!
I tried other combos of letters and it repeats the first letter each time?

Anyone

Similar Messages

  • I am continually getting error -69 when syncing iPad Air with latest iOS and iTunes versions. Any suggestions?

    I am continually getting error -69 when syncing iPad Air with latest iOS and iTunes versions. Any suggestions?

    Try Googling "sync without iTunes".
    There are free alternatives and there are not so free alternatives.
    Btw, to check if AVG is causing the problem, you should uninstall AVG and not just "turn it off".
    Also, can you describe how you go about uninstalling a program? For example, how did you "delete" iTunes?

  • Have an iPad mini with latest software upgrade 8.1.2. Verizon Messaging  on use after working for 1 yr. deleted app and downloaded fresh app. Same problem. Neither Apple support or Verizon store support could find problem. Sometimes can type txt befor it

    Have an iPad mini with latest software upgrade 8.1.2. Verizon Messaging app crashes on use after one year with no problems. I deleted the app and downloaded a clean version. It crashes whether or not I have any apps running in the background. Sometimes I can type part of a message before it crashes. Other times it crashes as soon as I try to use the app at all. Neither Apple Support nor Verizon store staff could find any reason for the problems. Any ideas??
    THE TEXT SHOULD SAY THE PROBLEM IS WITH THE APP CRASHING Message was edited by: Steady_RI

    Steady_RI, thanks for keeping us posted. Did you uninstall that application by pressing/holding down the icon until the (X) appears? Tap the (X) to delete it. Once the application has been deleted, you will need to reset the network settings on your device in Settings>General>Reset>Reset Network Settings. Power that device off/on and then download the application again. Additionally, we also recommend that you disable Wi-Fi and connect to our network to test the messaging feature again.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • My iPhone 5 with latest version of iOS 6 won't receive some text messages (not iMessages)

    My IPhone 5 with latest version of ios 6 won't receive some text messages. All text messages not received are from different people on the same carrier (not mine). Some messages come through if they repeatedly send them. I have tried resetting network settings. This fixes the issue for 10 minutes or so before I don't receive the messages again. I dont have iMessage on and I've tried a restore.

    Hi,
    I had the same issue.
    After resetting the network settings everything works fine again.
    YouTube App and the videos you posted above didn't play.
    After resetting, they are playable.
    Try it out.
    Best regards,
    Tolga

  • After the latest release of iOS 8.1.2, I am not able to view videos

    Hi All,
    After the latest release of iOS 8.1.2, I am not able to view videos from the below website:
    www.startv.in/episodes/santosh-discovers-the-truth/76711
    Until the previous iOS version 8.1.1, there wasn't any problem. But now none of the video is playing.
    Error message displayed is: This video isn't encoded for your device.
    How can this happen as some time back it was all fine until I updated the iOS.
    Please help. This is my favourite channel websites for lots of serials online.
    <Subject Edited by Host>

    The video won't play where I am but this might work for you. Go to the website. Tap the URL field. Pull your Favorites down. Tap request desktop site.

  • Will ios 7 still be supported by apple with the release of ios 8?

    Will ios 7 still be supported by apple with the release of ios 8?

    What does that mean?
    "Supported"?
    In what way?

  • I have an 3rd generation iTouch with IOS 5.1 and a new ipad LTE with a definitely higher IOS.  I didn't plug the new one yet because I want to know...can I keep my apps, email, photos on both devices?

    I have a 3rd generation iTouch with IOS 5.1 (won't update any higher) and a new iPad LTE with a definitely higher IOS.  I didn't plug the new one yet because I want to know...can I keep my apps, email, photos on both devices?  And also can I update my apps on the iPad without causing problems (some apps won't update on my iTouch because the IOS is not 6.0).  Thank you.

    Do this:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • Ipad mini with retina display and iOS 8.0.2 blue screen issues

    Hello
    My iPad mini with retina display with iOS8.0.3 is still showing up blue screen occasionally every day and restarting automatically. How to solve this?

    Hi!
    I am facing the same issue too. But how come you have 8.0.3 while the whole world is on 8.0.2 ?
    I tried resetting my iPad, restoring it, hard reset through DFU mode but NONE worked. It seemed to be okay for few days but then it started getting the blue screen restarts again.
    Monday is the day, hoping 8.1 will fix this issue. ELSE Apple should shut the f*** up and instead of releasing all new line of products and concentrate on the disastrous OS it is rolling out.
    Regards
    Yasser
    (FYI even as I am typing this response to you, there were many errors that held me from typing, the iOS 8 is so buggy)

  • I have atempted to update my ipad 1 with latest update but after extracting software it goes to restoring ipad software and stops at around 25% on the bar. have tried several times but it does the same I have one useless ipad at the moment ! any ideas ?

    I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?

    when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?

  • Ipad 3 with latest updated software

    since updating my ipad 3 to latest update i now have on my email button 3076 emails unread i do not have any unread emails at all so this should not be there would be grateful for any help on how to get rid of it

    There are no unread emails on your pad, but I bet there are 3, 076 in the inbox on your mail providers side.  Sometimes, during an upgrade, the mail program on the pad gets the number of e mails from the mail providers server. 
    So using a computer, or safari on the pad, use web mail to look at the account, and I suspect you will find a bunch of real old unopened emails sitting there.  Probably from before you even had the pad.  Delete them there - there is likely some sort of bulk delete capability at that end of the process.

  • Safari not working on iPad 2 with latest updates

    The safari is not working on my ipad 2.  It has all the latest updates.  When I try to go to an internet site it gives me an error message, "Safari cannot open the page because it could not connect to the server."  My other mobile devices are working.  I have closed all of the inactive apps, reset the wifi and all of the other things that have been previously suggested, but still not working.

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes &amp; Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. Do not reset your router. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • HT1947 This won't run on my iPad 1 with latest software

    App crashes instantly. Used to run fine :-(

    The current version of Subway Surfers, for example, which is version 1.37.0, requires iOS 6.0 or later to run.
    Your original iPad cannot run any iOS later than iOS 5.1.1.
    So while this app is compatible with iPad, it cannot run on your iPad as described above.

  • Apple has flagged the removal of the UDID with the release of iOS 5?

    Please send the feedback about the same topic

    This is a problem in every Ios update.  It happened in Ios4 update and was eventually fixed.  Seems apple forget to get this right on the first release, and I expect the same fix, like the last 3, to roll out in a bit.  Be nice if they could get it right on the first release.
    I am really hating the new "Music" layout and it is really awful with lots of toggles being almost identical colors (shuffle, repeat, etc.).  Miss the list of songs on opening the Music folder.  Now it is all graphics and is much more cumbersome to find your way around.  Apple ruined a perfectly good program with the new Music update on teh ios release.  Oh well.

  • I have an ipad 3 with retina and now ios 7 only gives me 768 x 1024

    how can i fix this issue?

    http://www.whatismyscreenresolution.com
    To check the resolution I went to this site...been accurate so far on all my devices

  • Issue with PO release (multi level approval)

    Hi,
    Need help regarding PO release. I am working with 4 level  approval process.
    Information:
    it is sequential release as I can see in workflow log, a new workflow gets generated for next level only after previous level executes the workitem.
    Facing following issue at 2nd Level :
    Level 2 releases item and it goes to Level 3, but workitem doesn’t disappear from inbox.Once Level 3 releases item, an acceptance mail goes to Level 2. But along with the mail, updated workitem (i.e. showing release by 3rd level) also appears in inbox of Level2. Now two work items appear in Level2 Inbox.
    In Workflow Log, this is how its behaving:
    WORKFLOW STARTED-->
    1st WF appears in WF log.
    Level 1 releases WI ->
    2nd workflow appears in WF log +
    1st workflow with (in process status)
    Level 2 releases WI ->
    3rd WF appears +
    2nd workflow with (in process status) +
    1st workflow with (in process status)
    Level 3 releases WI ->
    3rd WF appears +
    2nd workflow with (in process status) +
    1st workflow with (in process status)
    ISSUE: As soon as Level 3 sends back acceptance to Level 2, updated WI item appears( i.e. with latest release status which in this case is: released by level1, Level2 and Level3) along with the mail.
    Level 4 releases WI ->
    4th WF appears +
    3rd WF appears (in process status) +
    2nd workflow with (in process status) +
    1st workflow with (STATUS COMPLETED)
    ISSUE: As soon as Level 4 sends back acceptance to Level 2, updated WI item appears( i.e. with latest release status which in this case is: released by level1, Level2, Level3 and Level 4) along with the mail.
    Result:
    PO gets released.
    In workflow log 2nd, 3rd and 4th workflow appear with IN PROCESS STATUS. All of them show process stopped at LEVEL2.

    Hi Kjetil,
    Release strategy is being used. Configuration for release strategy is given as following.
    RGroup Rcode   Workflow     Agent
    Z6          R1         1                Blank
    Z6          R1             1                Blank
    Z6          R1             1                Blank
    Z6          R1             1                Blank
    Release is sequential.
    For column 'Agent' mentioning position or User is not really useful because we are getting agents through Z table. Reason is: current org structure supports 1 position with multiple users from same department. In our scenario we need to find initiators department then find relevant approval levels for that departemnt. So I cannot mention any position in 'Agent' Column as release code will be locked against one position and one departetment.
    Agents picked through Z table. Table has fields  Agent/ UserID , level, department.
    Logic to pick agents( Object and method created ): 
      When workflow starts, it finds department of the initiator.
      For that department-> find approval levels available(L1, L2,  L3).
      For these levels -> Find Agent mentioned for that level.
      Onece Agents are found for all levels -> Pass them to WF  container.
      In task activity, These agents are passed back to the rule and  the task comes to know which agent it should go to.
    Result : Four workflows start in sequence. When last level releases, only 1st workflow shows COMPLETED status. Rest three hang at level 2. If I see Me29N , release for that item is shown completed. To me it seems triggering of only first workflow is enough for release. Is there any way I can avoid trigerring of other three workflows?
    Edited by: User112 User112 on Jan 25, 2008 6:30 AM
    Edited by: User112 User112 on Jan 25, 2008 6:31 AM

Maybe you are looking for

  • Text File Editing

    sir i am having a text file but there is an unwanted junk data to be removed.it is at starting of the file import java.io.*; public class htmlpageparse     public htmlpageparse()         try         StringBuffer str=new StringBuffer();         String

  • Error Hex 0xFFFEF84D (web services with control system application)

    Hello, I'm trying to deploy a web service and it appears that when I use an element from the Control Design and Simulation panel I get the following error: "Error LabVIEW:  (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extractin

  • Weird behaviour with jsp:forward and jsp:param

    I'm running Orion 1.5.3 Wanted to ask if anyone has insight into the following. I'm trying to do a forward with a parameter. The parameter is something like a message string. The following does not work. <% String result = "unsucessful"; // retrieved

  • Trouble with batching filters sequentially

    I have an animated sequence of about 300 images which I'm applying to a single base image via the "Glass" filter (creating another animated sequence with the filter).  To do this manually, every time the Glass filter is applied I have to load a new s

  • Unwanted screen heading(Tab) in a screen set having only one screen.

    Hello Experts, We are at the initial phase of go live of SAP Work Manger-6.0 for one of our client. We found one strange behaviour as mentioned below. We have one screen set(at bottom),which is part of a tile view(contains two screen sets), The scree