Issues opening CC programs

I have just changed users on my MacbookPro (I had to use a corporate user account they assigned me) and now I'm having consistent issues opening Illustrator, InDesign and especially Photoshop.
What happens is that when I go to open say Photoshop, I will get the icon in the dock to bounce a few times and then nothing happens. I've tried opening a file by clicking on the file and the same thing. I've restarted and then I can open Photoshop. It seems to happen if I have other CC software open. I tried reinstalling Photoshop but no luck.

Moving the discussion to Photoshop General Discussion.
Thanks,
Atul Saini

Similar Messages

  • Apple says small number of Apple TVs have WiFi issues, opens replacement program

    I have an AppleTV 3rd generation with issues of connectivity when I use the Radio. Every 10 or 15 minutes disconnects from showing an error on the screen, I research on the internet and apparently there is a program to replace some devices due a known malfuncion with the WiFi.
    I always blamed to my cheap router and the poor internet connection I had in my former country Argentina. Now i moved to Chile and i have a nice Cisco/Linksys router and the issue persists.
    Please check the links below about the replacement program:
    http://www.macworld.com/article/2034731/report-apple-replacing-some-third-gen-ap ple-tv-units-with-wi-fi-issues.html
    http://9to5mac.com/2013/04/15/apple-says-small-number-of-apple-tvs-have-wifi-iss ues-opens-replacement-program/
    I would like to know if this program exists and also if my device is under this program.
    The serial number of my AppleTV is C0*****RHN.
    <Edited by host>

    That program was from over a year ago, it is no longer running. It still required proper troubleshooting to occur. It wouldn't have to do with an internet connection as this an issue with the local/wifi network, a cheap router will impact performance but there are other factors.
    Using ethernet will help to see if there's a wifi issue. Get a network report from istumbler, netstumbler or similar, look for signal strength and noise.
    If your network looks ok then I would take to Apple for testing, if it is found to be defective then they are usually good about replacement.

  • [SOLVED] Unable to open some programs in KDE, HFS+ partiton needs fsck

    I've had two unsettling experiences today; I'm not sure if they're related or not.
    I have a Mid-2012 MacBook Pro. I installed bluez + bluez-utils 5.13.1-1 in order to use an Apple Wireless Keyboard and Magic Trackpad. Following the instructions in the wiki for setting up bluetooth devices using bluetoothctl, I was able to connect to the keyboard without a hitch. However, when I connected the trackpad, I would be able to move the mouse for a few seconds and then the whole system would freeze and I would have to force reboot. I tried this a few a times. I couldn't find any errors in the logs or dmesg; the last entry in dmesg would always show the trackpad being connected, so it seemed like whatever happened after that wasn't being logged. I found a couple recent bug reports, one for Arch and one for Fedora, with similar issues.
    I ran pacman -Syu in case my problem was due to outdated drivers or something, but it didn't get fixed. It's possible that the problems I've having now were caused by the update and have nothing to do with the trackpad, but I don't know.
    Here's what was upgraded:
    [2014-01-08 17:33] [PACMAN] starting full system upgrade
    [2014-01-08 17:34] [PACMAN] upgraded glibc (2.18-11 -> 2.18-12)
    [2014-01-08 17:34] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2014-01-08 17:34] [PACMAN] upgraded kdebase-workspace (4.11.4-2 -> 4.11.5-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-glibc (2.18-11 -> 2.18-12)
    [2014-01-08 17:34] [PACMAN] upgraded libdrm (2.4.50-1 -> 2.4.51-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-libdrm (2.4.50-1 -> 2.4.51-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-nvidia-304xx-utils (304.117-1 -> 304.117-3)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-pcre (8.33-1 -> 8.34-1)
    [2014-01-08 17:34] [PACMAN] upgraded libcap (2.23-2 -> 2.24-1)
    [2014-01-08 17:34] [PACMAN] upgraded librsvg (1:2.40.1-1 -> 1:2.40.1-3)
    [2014-01-08 17:34] [PACMAN] upgraded libxfont (1.4.6-1 -> 1.4.7-1)
    [2014-01-08 17:34] [PACMAN] upgraded mesa (10.0.1-1 -> 10.0.1-2)
    [2014-01-08 17:34] [PACMAN] upgraded openssl (1.0.1.e-5 -> 1.0.1.f-1)
    [2014-01-08 17:34] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-01-08 17:34] [PACMAN] upgraded pacman-mirrorlist (20130830-1 -> 20140107-1)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server-common (1.14.5-1 -> 1.14.5-2)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server (1.14.5-1 -> 1.14.5-2)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server-devel (1.14.5-1 -> 1.14.5-2)
    In any case, now I can't open some programs; Skype and Okular both spend a while trying to open and then close again before anything happens. I also can't open the KDE application menu, although I can still launch programs with the quick launcher.
    Also, I have a non-journaled HFS partition that I use to store media and has been working fine, but now I can't write to it. In dmesg there's an entry from hfsplus saying "Filesystem wasn't unmounted cleanly, mounting it as read-only" and suggesting I run fsck.hfsplus, which doesn't seem to exist. I assume this message refers to my media partition. I tried doing a systemctl short health test which checked out fine, but I don't know that that really has much meaning here. I do have a backup of it if anything risky or drastic needs to be done.
    I'm generally new to Linux and not quite sure how to go about troubleshooting all this. I'd love some places to look, stuff to try, etc. Maybe I should try downgrading X server? I see some potentially weird stuff in my logs but nothing that looks like a smoking gun to me. However, I might just not know enough at this point to be able to recognize it.
    dmesg:
    There're a few firmware bugs and a segfault in konsole (see 0.047701, 0.257523, 12.077596, 27.185098).
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008cd12fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000008cd53000-0x000000008cd68fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cece000-0x000000008cefefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008cf91fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cf92000-0x000000008cffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008d000000-0x000000008f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016f5fffff] usable
    [ 0.000000] e820: update [mem 0x8970c190-0x89721dcf] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000008970c18f] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008970c190-0x0000000089721dcf] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000089721dd0-0x000000008cd12fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000008cd53000-0x000000008cd68fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cece000-0x000000008cefefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008ceff000-0x000000008cf91fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cf92000-0x000000008cffefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008cfff000-0x000000008cffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008d000000-0x000000008f9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000016f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v1.10 by Apple
    [ 0.000000] efi: ACPI=0x8cd8e000 ACPI 2.0=0x8cd8e014 SMBIOS=0x8cd1b000
    [ 0.000000] efi: mem00: type=7, attr=0x80000000000000f, range=[0x0000000000000000-0x000000000008e000) (0MB)
    [ 0.000000] efi: mem01: type=0, attr=0x80000000000000f, range=[0x000000000008e000-0x0000000000090000) (0MB)
    [ 0.000000] efi: mem02: type=2, attr=0x80000000000000f, range=[0x0000000000090000-0x000000000009a000) (0MB)
    [ 0.000000] efi: mem03: type=7, attr=0x80000000000000f, range=[0x000000000009a000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f54000) (15MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001f54000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcd7000) (1020MB)
    [ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fcd7000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x0000000088fbc000) (143MB)
    [ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000088fbc000-0x000000008936f000) (3MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000008936f000-0x000000008970c000) (3MB)
    [ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000008970c000-0x000000008972d000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000008972d000-0x0000000089741000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000089741000-0x0000000089742000) (0MB)
    [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000089742000-0x0000000089746000) (0MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000089746000-0x0000000089747000) (0MB)
    [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x0000000089747000-0x0000000089cb2000) (5MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000089cb2000-0x0000000089cb4000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000089cb4000-0x0000000089ccf000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000089ccf000-0x0000000089cd0000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000089cd0000-0x0000000089d0f000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000089d0f000-0x0000000089d24000) (0MB)
    [ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x0000000089d24000-0x0000000089d4a000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000089d4a000-0x0000000089d4b000) (0MB)
    [ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x0000000089d4b000-0x0000000089d4d000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000089d4d000-0x0000000089d53000) (0MB)
    [ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x0000000089d53000-0x0000000089d55000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000089d55000-0x0000000089d65000) (0MB)
    [ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x0000000089d65000-0x0000000089d99000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000089d99000-0x0000000089dba000) (0MB)
    [ 0.000000] efi: mem34: type=2, attr=0xf, range=[0x0000000089dba000-0x0000000089dbc000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000089dbc000-0x0000000089eb2000) (0MB)
    [ 0.000000] efi: mem36: type=2, attr=0xf, range=[0x0000000089eb2000-0x0000000089eb9000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000089eb9000-0x0000000089ec4000) (0MB)
    [ 0.000000] efi: mem38: type=2, attr=0xf, range=[0x0000000089ec4000-0x0000000089ec5000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000089ec5000-0x0000000089ec7000) (0MB)
    [ 0.000000] efi: mem40: type=2, attr=0xf, range=[0x0000000089ec7000-0x0000000089ecc000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000089ecc000-0x0000000089ecd000) (0MB)
    [ 0.000000] efi: mem42: type=2, attr=0xf, range=[0x0000000089ecd000-0x0000000089ece000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000089ece000-0x0000000089ed2000) (0MB)
    [ 0.000000] efi: mem44: type=2, attr=0xf, range=[0x0000000089ed2000-0x0000000089ed3000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000089ed3000-0x000000008a123000) (2MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000008a123000-0x000000008a143000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000008a143000-0x000000008b3ca000) (18MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x000000008b3ca000-0x000000008b3de000) (0MB)
    [ 0.000000] efi: mem49: type=1, attr=0xf, range=[0x000000008b3de000-0x000000008b413000) (0MB)
    [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000008b413000-0x000000008b41d000) (0MB)
    [ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x000000008b41d000-0x000000008b42b000) (0MB)
    [ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000008b42b000-0x000000008b42d000) (0MB)
    [ 0.000000] efi: mem53: type=2, attr=0xf, range=[0x000000008b42d000-0x000000008b42e000) (0MB)
    [ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000008b42e000-0x000000008b42f000) (0MB)
    [ 0.000000] efi: mem55: type=2, attr=0xf, range=[0x000000008b42f000-0x000000008b430000) (0MB)
    [ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000008b430000-0x000000008b433000) (0MB)
    [ 0.000000] efi: mem57: type=2, attr=0xf, range=[0x000000008b433000-0x000000008b435000) (0MB)
    [ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x000000008b435000-0x000000008b436000) (0MB)
    [ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000008b436000-0x000000008b438000) (0MB)
    [ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000008b438000-0x000000008b43b000) (0MB)
    [ 0.000000] efi: mem61: type=2, attr=0xf, range=[0x000000008b43b000-0x000000008b43e000) (0MB)
    [ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000008b43e000-0x000000008b43f000) (0MB)
    [ 0.000000] efi: mem63: type=2, attr=0xf, range=[0x000000008b43f000-0x000000008b446000) (0MB)
    [ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000008b446000-0x000000008b543000) (0MB)
    [ 0.000000] efi: mem65: type=2, attr=0xf, range=[0x000000008b543000-0x000000008b544000) (0MB)
    [ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000008b544000-0x000000008b55f000) (0MB)
    [ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x000000008b55f000-0x000000008b567000) (0MB)
    [ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000008b567000-0x000000008b57b000) (0MB)
    [ 0.000000] efi: mem69: type=2, attr=0xf, range=[0x000000008b57b000-0x000000008b57c000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x000000008b57c000-0x000000008b582000) (0MB)
    [ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x000000008b582000-0x000000008b584000) (0MB)
    [ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x000000008b584000-0x000000008b58c000) (0MB)
    [ 0.000000] efi: mem73: type=3, attr=0xf, range=[0x000000008b58c000-0x000000008b593000) (0MB)
    [ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x000000008b593000-0x000000008b594000) (0MB)
    [ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x000000008b594000-0x000000008b595000) (0MB)
    [ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x000000008b595000-0x000000008b597000) (0MB)
    [ 0.000000] efi: mem77: type=3, attr=0xf, range=[0x000000008b597000-0x000000008b598000) (0MB)
    [ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x000000008b598000-0x000000008b599000) (0MB)
    [ 0.000000] efi: mem79: type=2, attr=0xf, range=[0x000000008b599000-0x000000008b59a000) (0MB)
    [ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x000000008b59a000-0x000000008b59e000) (0MB)
    [ 0.000000] efi: mem81: type=3, attr=0xf, range=[0x000000008b59e000-0x000000008b5a3000) (0MB)
    [ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x000000008b5a3000-0x000000008b5bd000) (0MB)
    [ 0.000000] efi: mem83: type=3, attr=0xf, range=[0x000000008b5bd000-0x000000008b5c1000) (0MB)
    [ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x000000008b5c1000-0x000000008b5c5000) (0MB)
    [ 0.000000] efi: mem85: type=2, attr=0xf, range=[0x000000008b5c5000-0x000000008b5c6000) (0MB)
    [ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x000000008b5c6000-0x000000008b5c8000) (0MB)
    [ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x000000008b5c8000-0x000000008b5c9000) (0MB)
    [ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x000000008b5c9000-0x000000008b5ca000) (0MB)
    [ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x000000008b5ca000-0x000000008b5d5000) (0MB)
    [ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x000000008b5d5000-0x000000008b5d9000) (0MB)
    [ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x000000008b5d9000-0x000000008b5db000) (0MB)
    [ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x000000008b5db000-0x000000008b5ec000) (0MB)
    [ 0.000000] efi: mem93: type=2, attr=0xf, range=[0x000000008b5ec000-0x000000008b5ed000) (0MB)
    [ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x000000008b5ed000-0x000000008b5f5000) (0MB)
    [ 0.000000] efi: mem95: type=3, attr=0xf, range=[0x000000008b5f5000-0x000000008b631000) (0MB)
    [ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x000000008b631000-0x000000008b647000) (0MB)
    [ 0.000000] efi: mem97: type=3, attr=0xf, range=[0x000000008b647000-0x000000008b64a000) (0MB)
    [ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x000000008b64a000-0x000000008b681000) (0MB)
    [ 0.000000] efi: mem99: type=3, attr=0xf, range=[0x000000008b681000-0x000000008b68f000) (0MB)
    [ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x000000008b68f000-0x000000008b69d000) (0MB)
    [ 0.000000] efi: mem101: type=3, attr=0xf, range=[0x000000008b69d000-0x000000008b6b1000) (0MB)
    [ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x000000008b6b1000-0x000000008b6b5000) (0MB)
    [ 0.000000] efi: mem103: type=3, attr=0xf, range=[0x000000008b6b5000-0x000000008b6bb000) (0MB)
    [ 0.000000] efi: mem104: type=2, attr=0xf, range=[0x000000008b6bb000-0x000000008b6bc000) (0MB)
    [ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000008b6bc000-0x000000008b6bd000) (0MB)
    [ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x000000008b6bd000-0x000000008b6bf000) (0MB)
    [ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x000000008b6bf000-0x000000008b6c6000) (0MB)
    [ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000008b6c6000-0x000000008b6df000) (0MB)
    [ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000008b6df000-0x000000008b6e0000) (0MB)
    [ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x000000008b6e0000-0x000000008b6e1000) (0MB)
    [ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000008b6e1000-0x000000008b6e2000) (0MB)
    [ 0.000000] efi: mem112: type=2, attr=0xf, range=[0x000000008b6e2000-0x000000008b6e3000) (0MB)
    [ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000008b6e3000-0x000000008b6e5000) (0MB)
    [ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x000000008b6e5000-0x000000008b6e6000) (0MB)
    [ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x000000008b6e6000-0x000000008b6e7000) (0MB)
    [ 0.000000] efi: mem116: type=2, attr=0xf, range=[0x000000008b6e7000-0x000000008b6e8000) (0MB)
    [ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x000000008b6e8000-0x000000008b6e9000) (0MB)
    [ 0.000000] efi: mem118: type=3, attr=0xf, range=[0x000000008b6e9000-0x000000008b6eb000) (0MB)
    [ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x000000008b6eb000-0x000000008b6ec000) (0MB)
    [ 0.000000] efi: mem120: type=3, attr=0xf, range=[0x000000008b6ec000-0x000000008b6f1000) (0MB)
    [ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x000000008b6f1000-0x000000008b6f2000) (0MB)
    [ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x000000008b6f2000-0x000000008b6f3000) (0MB)
    [ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000008b6f3000-0x000000008b6f6000) (0MB)
    [ 0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000008b6f6000-0x000000008b6f7000) (0MB)
    [ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x000000008b6f7000-0x000000008b6f9000) (0MB)
    [ 0.000000] efi: mem126: type=3, attr=0xf, range=[0x000000008b6f9000-0x000000008b6fb000) (0MB)
    [ 0.000000] efi: mem127: type=2, attr=0xf, range=[0x000000008b6fb000-0x000000008b6fc000) (0MB)
    [ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x000000008b6fc000-0x000000008b6fe000) (0MB)
    [ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x000000008b6fe000-0x000000008b702000) (0MB)
    [ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x000000008b702000-0x000000008b705000) (0MB)
    [ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x000000008b705000-0x000000008b70d000) (0MB)
    [ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x000000008b70d000-0x000000008b710000) (0MB)
    [ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x000000008b710000-0x000000008b715000) (0MB)
    [ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x000000008b715000-0x000000008b716000) (0MB)
    [ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x000000008b716000-0x000000008b717000) (0MB)
    [ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x000000008b717000-0x000000008b718000) (0MB)
    [ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x000000008b718000-0x000000008b71e000) (0MB)
    [ 0.000000] efi: mem138: type=2, attr=0xf, range=[0x000000008b71e000-0x000000008b71f000) (0MB)
    [ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x000000008b71f000-0x000000008b720000) (0MB)
    [ 0.000000] efi: mem140: type=3, attr=0xf, range=[0x000000008b720000-0x000000008b722000) (0MB)
    [ 0.000000] efi: mem141: type=4, attr=0xf, range=[0x000000008b722000-0x000000008b724000) (0MB)
    [ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x000000008b724000-0x000000008b728000) (0MB)
    [ 0.000000] efi: mem143: type=2, attr=0xf, range=[0x000000008b728000-0x000000008b729000) (0MB)
    [ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x000000008b729000-0x000000008b733000) (0MB)
    [ 0.000000] efi: mem145: type=3, attr=0xf, range=[0x000000008b733000-0x000000008b738000) (0MB)
    [ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x000000008b738000-0x000000008b741000) (0MB)
    [ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x000000008b741000-0x000000008b75a000) (0MB)
    [ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x000000008b75a000-0x000000008b75c000) (0MB)
    [ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x000000008b75c000-0x000000008b76a000) (0MB)
    [ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x000000008b76a000-0x000000008b76b000) (0MB)
    [ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x000000008b76b000-0x000000008b76e000) (0MB)
    [ 0.000000] efi: mem152: type=4, attr=0xf, range=[0x000000008b76e000-0x000000008b771000) (0MB)
    [ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x000000008b771000-0x000000008b780000) (0MB)
    [ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x000000008b780000-0x000000008b781000) (0MB)
    [ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x000000008b781000-0x000000008b785000) (0MB)
    [ 0.000000] efi: mem156: type=2, attr=0xf, range=[0x000000008b785000-0x000000008b786000) (0MB)
    [ 0.000000] efi: mem157: type=4, attr=0xf, range=[0x000000008b786000-0x000000008b78b000) (0MB)
    [ 0.000000] efi: mem158: type=3, attr=0xf, range=[0x000000008b78b000-0x000000008b78f000) (0MB)
    [ 0.000000] efi: mem159: type=4, attr=0xf, range=[0x000000008b78f000-0x000000008b792000) (0MB)
    [ 0.000000] efi: mem160: type=2, attr=0xf, range=[0x000000008b792000-0x000000008b793000) (0MB)
    [ 0.000000] efi: mem161: type=4, attr=0xf, range=[0x000000008b793000-0x000000008b797000) (0MB)
    [ 0.000000] efi: mem162: type=3, attr=0xf, range=[0x000000008b797000-0x000000008b798000) (0MB)
    [ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x000000008b798000-0x000000008b79a000) (0MB)
    [ 0.000000] efi: mem164: type=2, attr=0xf, range=[0x000000008b79a000-0x000000008b79b000) (0MB)
    [ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x000000008b79b000-0x000000008b79c000) (0MB)
    [ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x000000008b79c000-0x000000008b7ae000) (0MB)
    [ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x000000008b7ae000-0x000000008b7af000) (0MB)
    [ 0.000000] efi: mem168: type=3, attr=0xf, range=[0x000000008b7af000-0x000000008b7b1000) (0MB)
    [ 0.000000] efi: mem169: type=4, attr=0xf, range=[0x000000008b7b1000-0x000000008b7b3000) (0MB)
    [ 0.000000] efi: mem170: type=3, attr=0xf, range=[0x000000008b7b3000-0x000000008b7bc000) (0MB)
    [ 0.000000] efi: mem171: type=4, attr=0xf, range=[0x000000008b7bc000-0x000000008b7c3000) (0MB)
    [ 0.000000] efi: mem172: type=3, attr=0xf, range=[0x000000008b7c3000-0x000000008b7c4000) (0MB)
    [ 0.000000] efi: mem173: type=4, attr=0xf, range=[0x000000008b7c4000-0x000000008b7c5000) (0MB)
    [ 0.000000] efi: mem174: type=2, attr=0xf, range=[0x000000008b7c5000-0x000000008b7c6000) (0MB)
    [ 0.000000] efi: mem175: type=4, attr=0xf, range=[0x000000008b7c6000-0x000000008b7c7000) (0MB)
    [ 0.000000] efi: mem176: type=3, attr=0xf, range=[0x000000008b7c7000-0x000000008b7d5000) (0MB)
    [ 0.000000] efi: mem177: type=4, attr=0xf, range=[0x000000008b7d5000-0x000000008b7d6000) (0MB)
    [ 0.000000] efi: mem178: type=3, attr=0xf, range=[0x000000008b7d6000-0x000000008b7e3000) (0MB)
    [ 0.000000] efi: mem179: type=4, attr=0xf, range=[0x000000008b7e3000-0x000000008b7e4000) (0MB)
    [ 0.000000] efi: mem180: type=3, attr=0xf, range=[0x000000008b7e4000-0x000000008b7ee000) (0MB)
    [ 0.000000] efi: mem181: type=4, attr=0xf, range=[0x000000008b7ee000-0x000000008b7ef000) (0MB)
    [ 0.000000] efi: mem182: type=3, attr=0xf, range=[0x000000008b7ef000-0x000000008b7f5000) (0MB)
    [ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x000000008b7f5000-0x000000008b7f9000) (0MB)
    [ 0.000000] efi: mem184: type=3, attr=0xf, range=[0x000000008b7f9000-0x000000008b7ff000) (0MB)
    [ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x000000008b7ff000-0x000000008b800000) (0MB)
    [ 0.000000] efi: mem186: type=3, attr=0xf, range=[0x000000008b800000-0x000000008b801000) (0MB)
    [ 0.000000] efi: mem187: type=4, attr=0xf, range=[0x000000008b801000-0x000000008b802000) (0MB)
    [ 0.000000] efi: mem188: type=2, attr=0xf, range=[0x000000008b802000-0x000000008b804000) (0MB)
    [ 0.000000] efi: mem189: type=4, attr=0xf, range=[0x000000008b804000-0x000000008b805000) (0MB)
    [ 0.000000] efi: mem190: type=3, attr=0xf, range=[0x000000008b805000-0x000000008b806000) (0MB)
    [ 0.000000] efi: mem191: type=4, attr=0xf, range=[0x000000008b806000-0x000000008b80b000) (0MB)
    [ 0.000000] efi: mem192: type=3, attr=0xf, range=[0x000000008b80b000-0x000000008b80d000) (0MB)
    [ 0.000000] efi: mem193: type=4, attr=0xf, range=[0x000000008b80d000-0x000000008b810000) (0MB)
    [ 0.000000] efi: mem194: type=2, attr=0xf, range=[0x000000008b810000-0x000000008b811000) (0MB)
    [ 0.000000] efi: mem195: type=3, attr=0xf, range=[0x000000008b811000-0x000000008b812000) (0MB)
    [ 0.000000] efi: mem196: type=4, attr=0xf, range=[0x000000008b812000-0x000000008b814000) (0MB)
    [ 0.000000] efi: mem197: type=3, attr=0xf, range=[0x000000008b814000-0x000000008b817000) (0MB)
    [ 0.000000] efi: mem198: type=4, attr=0xf, range=[0x000000008b817000-0x000000008b819000) (0MB)
    [ 0.000000] efi: mem199: type=3, attr=0xf, range=[0x000000008b819000-0x000000008b824000) (0MB)
    [ 0.000000] efi: mem200: type=4, attr=0xf, range=[0x000000008b824000-0x000000008b826000) (0MB)
    [ 0.000000] efi: mem201: type=3, attr=0xf, range=[0x000000008b826000-0x000000008b828000) (0MB)
    [ 0.000000] efi: mem202: type=4, attr=0xf, range=[0x000000008b828000-0x000000008b82c000) (0MB)
    [ 0.000000] efi: mem203: type=3, attr=0xf, range=[0x000000008b82c000-0x000000008b82d000) (0MB)
    [ 0.000000] efi: mem204: type=4, attr=0xf, range=[0x000000008b82d000-0x000000008b82f000) (0MB)
    [ 0.000000] efi: mem205: type=2, attr=0xf, range=[0x000000008b82f000-0x000000008b830000) (0MB)
    [ 0.000000] efi: mem206: type=4, attr=0xf, range=[0x000000008b830000-0x000000008b832000) (0MB)
    [ 0.000000] efi: mem207: type=3, attr=0xf, range=[0x000000008b832000-0x000000008b833000) (0MB)
    [ 0.000000] efi: mem208: type=4, attr=0xf, range=[0x000000008b833000-0x000000008b837000) (0MB)
    [ 0.000000] efi: mem209: type=3, attr=0xf, range=[0x000000008b837000-0x000000008b839000) (0MB)
    [ 0.000000] efi: mem210: type=4, attr=0xf, range=[0x000000008b839000-0x000000008b83b000) (0MB)
    [ 0.000000] efi: mem211: type=2, attr=0xf, range=[0x000000008b83b000-0x000000008b83c000) (0MB)
    [ 0.000000] efi: mem212: type=4, attr=0xf, range=[0x000000008b83c000-0x000000008b83d000) (0MB)
    [ 0.000000] efi: mem213: type=3, attr=0xf, range=[0x000000008b83d000-0x000000008b83e000) (0MB)
    [ 0.000000] efi: mem214: type=4, attr=0xf, range=[0x000000008b83e000-0x000000008b841000) (0MB)
    [ 0.000000] efi: mem215: type=3, attr=0xf, range=[0x000000008b841000-0x000000008b842000) (0MB)
    [ 0.000000] efi: mem216: type=4, attr=0xf, range=[0x000000008b842000-0x000000008b859000) (0MB)
    [ 0.000000] efi: mem217: type=3, attr=0xf, range=[0x000000008b859000-0x000000008b85e000) (0MB)
    [ 0.000000] efi: mem218: type=4, attr=0xf, range=[0x000000008b85e000-0x000000008b863000) (0MB)
    [ 0.000000] efi: mem219: type=2, attr=0xf, range=[0x000000008b863000-0x000000008b864000) (0MB)
    [ 0.000000] efi: mem220: type=4, attr=0xf, range=[0x000000008b864000-0x000000008b8bf000) (0MB)
    [ 0.000000] efi: mem221: type=3, attr=0xf, range=[0x000000008b8bf000-0x000000008b8d1000) (0MB)
    [ 0.000000] efi: mem222: type=4, attr=0xf, range=[0x000000008b8d1000-0x000000008b8ec000) (0MB)
    [ 0.000000] efi: mem223: type=3, attr=0xf, range=[0x000000008b8ec000-0x000000008b8ef000) (0MB)
    [ 0.000000] efi: mem224: type=4, attr=0xf, range=[0x000000008b8ef000-0x000000008b91b000) (0MB)
    [ 0.000000] efi: mem225: type=3, attr=0xf, range=[0x000000008b91b000-0x000000008b92f000) (0MB)
    [ 0.000000] efi: mem226: type=4, attr=0xf, range=[0x000000008b92f000-0x000000008b930000) (0MB)
    [ 0.000000] efi: mem227: type=2, attr=0xf, range=[0x000000008b930000-0x000000008b931000) (0MB)
    [ 0.000000] efi: mem228: type=4, attr=0xf, range=[0x000000008b931000-0x000000008b94d000) (0MB)
    [ 0.000000] efi: mem229: type=3, attr=0xf, range=[0x000000008b94d000-0x000000008b952000) (0MB)
    [ 0.000000] efi: mem230: type=4, attr=0xf, range=[0x000000008b952000-0x000000008b958000) (0MB)
    [ 0.000000] efi: mem231: type=2, attr=0xf, range=[0x000000008b958000-0x000000008b959000) (0MB)
    [ 0.000000] efi: mem232: type=4, attr=0xf, range=[0x000000008b959000-0x000000008b95a000) (0MB)
    [ 0.000000] efi: mem233: type=3, attr=0xf, range=[0x000000008b95a000-0x000000008b95b000) (0MB)
    [ 0.000000] efi: mem234: type=4, attr=0xf, range=[0x000000008b95b000-0x000000008b95c000) (0MB)
    [ 0.000000] efi: mem235: type=3, attr=0xf, range=[0x000000008b95c000-0x000000008b95d000) (0MB)
    [ 0.000000] efi: mem236: type=4, attr=0xf, range=[0x000000008b95d000-0x000000008b970000) (0MB)
    [ 0.000000] efi: mem237: type=3, attr=0xf, range=[0x000000008b970000-0x000000008b975000) (0MB)
    [ 0.000000] efi: mem238: type=4, attr=0xf, range=[0x000000008b975000-0x000000008b976000) (0MB)
    [ 0.000000] efi: mem239: type=3, attr=0xf, range=[0x000000008b976000-0x000000008b979000) (0MB)
    [ 0.000000] efi: mem240: type=4, attr=0xf, range=[0x000000008b979000-0x000000008b97a000) (0MB)
    [ 0.000000] efi: mem241: type=3, attr=0xf, range=[0x000000008b97a000-0x000000008b98b000) (0MB)
    [ 0.000000] efi: mem242: type=4, attr=0xf, range=[0x000000008b98b000-0x000000008b98e000) (0MB)
    [ 0.000000] efi: mem243: type=3, attr=0xf, range=[0x000000008b98e000-0x000000008b99a000) (0MB)
    [ 0.000000] efi: mem244: type=2, attr=0xf, range=[0x000000008b99a000-0x000000008b99b000) (0MB)
    [ 0.000000] efi: mem245: type=4, attr=0xf, range=[0x000000008b99b000-0x000000008b99c000) (0MB)
    [ 0.000000] efi: mem246: type=3, attr=0xf, range=[0x000000008b99c000-0x000000008b99d000) (0MB)
    [ 0.000000] efi: mem247: type=2, attr=0xf, range=[0x000000008b99d000-0x000000008b99e000) (0MB)
    [ 0.000000] efi: mem248: type=4, attr=0xf, range=[0x000000008b99e000-0x000000008b99f000) (0MB)
    [ 0.000000] efi: mem249: type=3, attr=0xf, range=[0x000000008b99f000-0x000000008b9a2000) (0MB)
    [ 0.000000] efi: mem250: type=4, attr=0xf, range=[0x000000008b9a2000-0x000000008b9a3000) (0MB)
    [ 0.000000] efi: mem251: type=3, attr=0xf, range=[0x000000008b9a3000-0x000000008b9a5000) (0MB)
    [ 0.000000] efi: mem252: type=2, attr=0xf, range=[0x000000008b9a5000-0x000000008b9a6000) (0MB)
    [ 0.000000] efi: mem253: type=4, attr=0xf, range=[0x000000008b9a6000-0x000000008b9a7000) (0MB)
    [ 0.000000] efi: mem254: type=3, attr=0xf, range=[0x000000008b9a7000-0x000000008b9a8000) (0MB)
    [ 0.000000] efi: mem255: type=4, attr=0xf, range=[0x000000008b9a8000-0x000000008bdc9000) (4MB)
    [ 0.000000] efi: mem256: type=3, attr=0xf, range=[0x000000008bdc9000-0x000000008bdce000) (0MB)
    [ 0.000000] efi: mem257: type=4, attr=0xf, range=[0x000000008bdce000-0x000000008be56000) (0MB)
    [ 0.000000] efi: mem258: type=3, attr=0xf, range=[0x000000008be56000-0x000000008be5d000) (0MB)
    [ 0.000000] efi: mem259: type=4, attr=0xf, range=[0x000000008be5d000-0x000000008be5e000) (0MB)
    [ 0.000000] efi: mem260: type=2, attr=0xf, range=[0x000000008be5e000-0x000000008be5f000) (0MB)
    [ 0.000000] efi: mem261: type=3, attr=0xf, range=[0x000000008be5f000-0x000000008be60000) (0MB)
    [ 0.000000] efi: mem262: type=4, attr=0xf, range=[0x000000008be60000-0x000000008be61000) (0MB)
    [ 0.000000] efi: mem263: type=3, attr=0xf, range=[0x000000008be61000-0x000000008be66000) (0MB)
    [ 0.000000] efi: mem264: type=4, attr=0xf, range=[0x000000008be66000-0x000000008be67000) (0MB)
    [ 0.000000] efi: mem265: type=3, attr=0xf, range=[0x000000008be67000-0x000000008be68000) (0MB)
    [ 0.000000] efi: mem266: type=4, attr=0xf, range=[0x000000008be68000-0x000000008be69000) (0MB)
    [ 0.000000] efi: mem267: type=3, attr=0xf, range=[0x000000008be69000-0x000000008be6a000) (0MB)
    [ 0.000000] efi: mem268: type=4, attr=0xf, range=[0x000000008be6a000-0x000000008be6c000) (0MB)
    [ 0.000000] efi: mem269: type=3, attr=0xf, range=[0x000000008be6c000-0x000000008be6d000) (0MB)
    [ 0.000000] efi: mem270: type=4, attr=0xf, range=[0x000000008be6d000-0x000000008be92000) (0MB)
    [ 0.000000] efi: mem271: type=3, attr=0xf, range=[0x000000008be92000-0x000000008be93000) (0MB)
    [ 0.000000] efi: mem272: type=4, attr=0xf, range=[0x000000008be93000-0x000000008c358000) (4MB)
    [ 0.000000] efi: mem273: type=2, attr=0xf, range=[0x000000008c358000-0x000000008c359000) (0MB)
    [ 0.000000] efi: mem274: type=4, attr=0xf, range=[0x000000008c359000-0x000000008ccf7000) (9MB)
    [ 0.000000] efi: mem275: type=2, attr=0xf, range=[0x000000008ccf7000-0x000000008ccf8000) (0MB)
    [ 0.000000] efi: mem276: type=4, attr=0xf, range=[0x000000008ccf8000-0x000000008ccfa000) (0MB)
    [ 0.000000] efi: mem277: type=2, attr=0xf, range=[0x000000008ccfa000-0x000000008ccfb000) (0MB)
    [ 0.000000] efi: mem278: type=4, attr=0xf, range=[0x000000008ccfb000-0x000000008cd03000) (0MB)
    [ 0.000000] efi: mem279: type=7, attr=0xf, range=[0x000000008cd03000-0x000000008cd13000) (0MB)
    [ 0.000000] efi: mem280: type=10, attr=0xf, range=[0x000000008cd13000-0x000000008cd53000) (0MB)
    [ 0.000000] efi: mem281: type=7, attr=0xf, range=[0x000000008cd53000-0x000000008cd69000) (0MB)
    [ 0.000000] efi: mem282: type=9, attr=0xf, range=[0x000000008cd69000-0x000000008cd8f000) (0MB)
    [ 0.000000] efi: mem283: type=7, attr=0xf, range=[0x000000008cd8f000-0x000000008ce3b000) (0MB)
    [ 0.000000] efi: mem284: type=6, attr=0x800000000000000f, range=[0x000000008ce3b000-0x000000008ce8f000) (0MB)
    [ 0.000000] efi: mem285: type=7, attr=0xf, range=[0x000000008ce8f000-0x000000008cece000) (0MB)
    [ 0.000000] efi: mem286: type=5, attr=0x800000000000000f, range=[0x000000008cece000-0x000000008ceff000) (0MB)
    [ 0.000000] efi: mem287: type=7, attr=0xf, range=[0x000000008ceff000-0x000000008cf92000) (0MB)
    [ 0.000000] efi: mem288: type=0, attr=0xf, range=[0x000000008cf92000-0x000000008cfff000) (0MB)
    [ 0.000000] efi: mem289: type=2, attr=0xf, range=[0x000000008cfff000-0x000000008d000000) (0MB)
    [ 0.000000] efi: mem290: type=7, attr=0xf, range=[0x0000000100000000-0x000000016f600000) (1782MB)
    [ 0.000000] efi: mem291: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem292: type=0, attr=0x8000000000000000, range=[0x000000008d000000-0x000000008fa00000) (42MB)
    [ 0.000000] efi: mem293: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
    [ 0.000000] efi: mem294: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem295: type=11, attr=0x8000000000000000, range=[0x00000000ffe70000-0x00000000ffea0000) (0MB)
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: Apple Inc. MacBookPro9,1/Mac-4B7AC7E43945597E, BIOS MBP91.88Z.00D3.B08.1208081132 08/08/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x16f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 090000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 08E000000 mask FFE000000 uncachable
    [ 0.000000] 4 base 08D000000 mask FFF000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x8d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x16f400000-0x16f5fffff]
    [ 0.000000] [mem 0x16f400000-0x16f5fffff] page 2M
    [ 0.000000] BRK [0x02b35000, 0x02b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16f3fffff]
    [ 0.000000] [mem 0x16c000000-0x16f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff]
    [ 0.000000] [mem 0x100000000-0x16bffffff] page 2M
    [ 0.000000] BRK [0x02b36000, 0x02b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x02b37000, 0x02b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x8cd12fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x8cbfffff] page 2M
    [ 0.000000] [mem 0x8cc00000-0x8cd12fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cd53000-0x8cd68fff]
    [ 0.000000] [mem 0x8cd53000-0x8cd68fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cd8f000-0x8ce3afff]
    [ 0.000000] [mem 0x8cd8f000-0x8ce3afff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8ce8f000-0x8cecdfff]
    [ 0.000000] [mem 0x8ce8f000-0x8cecdfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8ceff000-0x8cf91fff]
    [ 0.000000] [mem 0x8ceff000-0x8cf91fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cfff000-0x8cffffff]
    [ 0.000000] [mem 0x8cfff000-0x8cffffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7fcd7000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 000000008cd8e014 00024 (v02 APPLE )
    [ 0.000000] ACPI: XSDT 000000008cd8e1c0 000B4 (v01 APPLE Apple00 00000000 01000013)
    [ 0.000000] ACPI: FACP 000000008cd8c000 000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
    [ 0.000000] ACPI: DSDT 000000008cd82000 04D53 (v01 APPLE MacBookP 00090001 INTL 20100915)
    [ 0.000000] ACPI: FACS 000000008cd1e000 00040
    [ 0.000000] ACPI: HPET 000000008cd8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: APIC 000000008cd8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SBST 000000008cd88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ECDT 000000008cd87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SSDT 000000008cd7f000 002E0 (v01 APPLE SataAhci 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd7e000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd79000 00D20 (v01 APPLE UsbPpt 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd75000 00032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6e000 013D8 (v01 APPLE TbtPEG11 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6d000 00615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6c000 00B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6b000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6a000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
    [ 0.000000] ACPI: DMAR 000000008cd69000 00088 (v01 APPLE IVB 00000001 AAPL 00000001)
    [ 0.000000] ACPI: MCFG 000000008cd89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16f5fffff]
    [ 0.000000] NODE_DATA [mem 0x16f5f7000-0x16f5fbfff]
    [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016ac00000-ffff88016ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x16f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
    [ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x8cd12fff]
    [ 0.000000] node 0: [mem 0x8cd53000-0x8cd68fff]
    [ 0.000000] node 0: [mem 0x8cd8f000-0x8ce3afff]
    [ 0.000000] node 0: [mem 0x8ce8f000-0x8cecdfff]
    [ 0.000000] node 0: [mem 0x8ceff000-0x8cf91fff]
    [ 0.000000] node 0: [mem 0x8cfff000-0x8cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x16f5fffff]
    [ 0.000000] On node 0 totalpages: 1032772
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 26 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8947 pages used for memmap
    [ 0.000000] DMA32 zone: 572583 pages, LIFO batch:31
    [ 0.000000] Normal zone: 7128 pages used for memmap
    [ 0.000000] Normal zone: 456192 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8970c000-0x8970cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x89721000-0x89721fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cd13000-0x8cd52fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cd69000-0x8cd8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8ce3b000-0x8ce8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cece000-0x8cefefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cf92000-0x8cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8d000000-0x8f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
    [ 0.000000] e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88016f200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016607
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3935088K/4131088K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 196000K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.978 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.20 BogoMIPS (lpj=7649926)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000032] init_memory_mapping: [mem 0x8ce3b000-0x8ce8efff]
    [ 0.000034] [mem 0x8ce3b000-0x8ce8efff] page 4k
    [ 0.000045] init_memory_mapping: [mem 0x8cece000-0x8cefefff]
    [ 0.000046] [mem 0x8cece000-0x8cefefff] page 4k
    [ 0.000086] init_memory_mapping: [mem 0x8d000000-0x8f9fffff]
    [ 0.000087] [mem 0x8d000000-0x8f9fffff] page 2M
    [ 0.026158] Security Framework initialized
    [ 0.026166] AppArmor: AppArmor disabled by boot time parameter
    [ 0.026167] Yama: becoming mindful.
    [ 0.026441] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.027488] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.027952] Mount-cache hash table entries: 256
    [ 0.028114] Initializing cgroup subsys memory
    [ 0.028122] Initializing cgroup subsys devices
    [ 0.028124] Initializing cgroup subsys freezer
    [ 0.028125] Initializing cgroup subsys net_cls
    [ 0.028127] Initializing cgroup subsys blkio
    [ 0.028148] CPU: Physical Processor ID: 0
    [ 0.028149] CPU: Processor Core ID: 0
    [ 0.028538] mce: CPU supports 9 MCE banks
    [ 0.028551] CPU0: Thermal monitoring enabled (TM1)
    [ 0.028560] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.028670] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.029671] ACPI: Core revision 20130725
    [ 0.036004] ACPI: All ACPI Tables successfully acquired
    [ 0.037838] ftrace: allocating 20318 entries in 80 pages
    [ 0.047613] dmar: Host address width 36
    [ 0.047615] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.047621] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.047622] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.047627] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.047628] dmar: RMRR base: 0x0000008d800000 end: 0x0000008f9fffff
    [ 0.047699] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.047700] HPET id 0 under DRHD base 0xfed91000
    [ 0.047701] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
    [ 0.047705] Not enable interrupt remapping
    [ 0.047706] Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
    [ 0.048157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081147] smpboot: CPU0: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.081154] TSC deadline timer enabled
    [ 0.081162] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.081169] ... version: 3
    [ 0.081170] ... bit width: 48
    [ 0.081171] ... generic registers: 4
    [ 0.081171] ... value mask: 0000ffffffffffff
    [ 0.081172] ... max period: 0000ffffffffffff
    [ 0.081173] ... fixed-purpose events: 3
    [ 0.081174] ... event mask: 000000070000000f
    [ 0.118277] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.104573] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.240347] Brought up 8 CPUs
    [ 0.240351] smpboot: Total of 8 processors activated (36734.63 BogoMIPS)
    [ 0.247904] devtmpfs: initialized
    [ 0.250380] PM: Registering ACPI NVS region [mem 0x8cd13000-0x8cd52fff] (262144 bytes)
    [ 0.251164] RTC time: 7:32:07, date: 01/09/14
    [ 0.251202] NET: Registered protocol family 16
    [ 0.251294] cpuidle: using governor ladder
    [ 0.251296] cpuidle: using governor menu
    [ 0.251322] ACPI: bus type PCI registered
    [ 0.251324] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.251381] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
    [ 0.251384] PCI: not using MMCONFIG
    [ 0.251385] PCI: Using configuration type 1 for base access
    [ 0.251999] bio: create slab <bio-0> at 0
    [ 0.252116] ACPI: Added _OSI(Module Device)
    [ 0.252117] ACPI: Added _OSI(Processor Device)
    [ 0.252118] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252119] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253362] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.257523] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 2.254668] ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20130725/evregion-287)
    [ 2.254672] ACPI Error: Method parse/execution failed [\_SB_.PCI0.ZYXW] (Node ffff880169288708), AE_ERROR (20130725/psparse-536)
    [ 2.254677] ACPI Error: Method parse/execution failed [\_SB_._INI] (Node ffff880169253fa0), AE_ERROR (20130725/psparse-536)
    [ 2.255095] ACPI: SSDT 000000008cd19190 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    [ 2.255414] ACPI: Dynamic OEM Table Load:
    [ 2.255416] ACPI: SSDT (null) 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    [ 2.268225] ACPI: SSDT 000000008cd1a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    [ 2.268583] ACPI: Dynamic OEM Table Load:
    [ 2.268585] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    [ 2.281264] ACPI: SSDT 000000008cd18d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    [ 2.281581] ACPI: Dynamic OEM Table Load:
    [ 2.281583] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    [ 2.295568] ACPI: Interpreter enabled
    [ 2.295575] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 2.295579] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 2.295592] ACPI: (supports S0 S3 S4 S5)
    [ 2.295593] ACPI: Using IOAPIC for interrupt routing
    [ 2.295614] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
    [ 2.295963] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
    [ 2.319936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.320064] ACPI: No dock devices found.
    [ 2.328628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 2.328727] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 2.328815] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    [ 2.329006] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
    [ 2.329109] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 2.329127] PCI host bridge to bus 0000:00
    [ 2.329129] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 2.329131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.329133] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.329135] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.329136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 2.329138] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 2.329139] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 2.329141] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 2.329142] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 2.329144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 2.329145] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 2.329147] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 2.329148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 2.329150] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 2.329151] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 2.329153] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 2.329154] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 2.329156] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
    [ 2.329157] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 2.329165] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 2.329244] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 2.329277] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.329309] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 2.329346] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
    [ 2.329425] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
    [ 2.329464] pci 0000:00:01.1: System wakeup disabled by ACPI
    [ 2.329498] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 2.329509] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
    [ 2.329516] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 2.329521] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 2.329611] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 2.329633] pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff 64bit]
    [ 2.329696] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.329729] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.329765] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 2.329790] pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f 64bit]
    [ 2.329869] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.329945] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 2.329968] pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
    [ 2.330059] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.330095] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.330130] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 2.330143] pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff 64bit]
    [ 2.330205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.330240] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 2.330273] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 2.330352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.330391] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 2.330423] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 2.330502] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 2.330540] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 2.330572] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 2.330653] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 2.330690] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 2.330733] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 2.330755] pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
    [ 2.330846] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.330882] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.330917] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 2.331082] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 2.331102] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
    [ 2.331111] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
    [ 2.331120] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
    [ 2.331129] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
    [ 2.331137] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 2.331145] pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
    [ 2.331192] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.331255] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 2.331269] pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff 64bit]
    [ 2.331285] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 2.331414] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
    [ 2.331425] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
    [ 2.331436] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
    [ 2.331447] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
    [ 2.331455] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
    [ 2.331463] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
    [ 2.331519] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 2.331560] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
    [ 2.331569] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
    [ 3.338172] pci 0000:00:01.0: ASPM: Could not configure common clock
    [ 3.338218] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 3.338221] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 3.338223] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
    [ 3.338227] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
    [ 3.338301] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
    [ 3.338304] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
    [ 3.338308] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
    [ 3.338314] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
    [ 3.338460] pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000
    [ 3.338493] pci 0000:02:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit pref]
    [ 3.338518] pci 0000:02:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff 64bit pref]
    [ 3.338668] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 3.338738] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 3.338824] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 3.338861] pci 0000:02:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff 64bit pref]
    [ 3.339051] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 3.339096] pci 0000:02:00.1: System wakeup disabled by ACPI
    [ 3.344942] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 3.344949] pci 0000:00:1c.0: bridge window [mem 0xc1b00000-0xc1bfffff]
    [ 3.344955] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
    [ 3.345076] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000
    [ 3.345105] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a03fff 64bit]
    [ 3.345247] pci 0000:03:00.0: supports D1 D2
    [ 3.345286] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 3.351561] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 3.351568] pci 0000:00:1c.1: bridge window [mem 0xc1a00000-0xc1afffff]
    [ 3.351673] pci 0000:04:00.0: [11c1:5901] type 00 class 0x0c0010
    [ 3.351712] pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1900fff 64bit]
    [ 3.351903] pci 0000:04:00.0: supports D1 D2
    [ 3.351904] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 3.358214] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 3.358221] pci 0000:00:1c.2: bridge window [mem 0xc1900000-0xc19fffff]
    [ 3.358742] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358790] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 3.358836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358883] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 3.358929] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358973] ACPI: PCI Interrupt L

    I did read that report initially; I ended up just removing bluez and bluez-utils since I don't care that much about using those peripherals. I imagine that if I downgraded the kernel I might be able to run bluez and get the trackpad to work. I think I'd rather keep my copy of the kernel up-to-date at this point since I don't really care that much about using that trackpad. Thanks for the suggestion, though—if I decide I really do want to use it I'll downgrade and see if that helps.
    The problems with running programs seem to have fixed themselves semi-mysteriously. That problem was persisting through reboots initially. I looked at the running processes and saw that the programs I had tried to open were actually running, but KDE wasn't behaving as such. I tried rebooting and using startx to see if I could see those programs running there, which I could. After that KDE behaved properly.
    It seems like HFS support for fsck is poorly if at all supported outside of Mac OS, so I booted into Mac OS and ran fsck_hfs on my media partition. This worked, and I can read and write from it again.
    EDIT: In case anyone is curious, there seems to be a fix pending for the trackpad issues—see here and here.
    Last edited by tenfoxes (2014-01-09 20:42:45)

  • So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

    So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?

    I've got the same issue and it affects all my adobe software.  You are not alone as I have seen several postings looking for the answer to this help request.

  • Numbers 09 not working - I can open the program but only a few files are available, missing blank, checklist and many others. e.g  when I click on a file I get this error: The document "nmbtemplate is invalid. The index.xml file is missing. help.

    Please let me know what I can do to get my Numbers (iWork 09) working properly again.
    Here is what is going on:
    Numbers in iWork 09 not working can't access Blank, Checklist and many other files within Numbers.   I can open the program but only a few files are available. When I click on the file (which also has no icon just the name of the file) this warning appears:
    The document "Blank.nmbtemplate" is invalid.  The index.xml file is missing.
    I recently had to get a new hard drive installed and had the system upgraded and more memory put in by a Mac certified specialist recommended to me from the Apple store in Northbrook because this was the 3rd time my drive went bad but this time it was to old (I got the IMAC- in 2007) and the Apple store could no longer work on it this time so they recommended a few places that had certified Mac specialists.  Since then Numbers is not working right.
    I'm sure it's something simple to fix, but I've tried re installing it and that didn't work.  Appreciate any help.
    Thanks
    AppMare

    There is one way its getting fixed. Once I update my Adobe Illustrator CC to Adobe Illustrator CC 2014 it is further allowing me to go into the system folder and allocate the font to the file so that it can replace it. My only concern now is that our MAC partners who will receive these files back from us have Adobe CS6. We will down save it to CS6 but I hope they won't experience any font issues because of us using CC 2014? Any light you can shed on this?

  • Since up grading to Adobe Reader X when I try to open any program Adobe tries to open it, therefore I can not open any programs now on my computer. I need help very quickly.

    I can not open any programs now that I have upgraded to Reader X. It has made Adobe the default progam to open all programs.

    Hi Kate,
    Please refer to this KB doc. for the solution Application, file icons change to Acrobat/Reader icon
    Let me know if the issue persist.
    Regards,
    Aadesh

  • I downloader all the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder

    I downloadedall the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder

    HI There,
    It seems that Presenter is not fully downloaded. Please check you have downloaded .exe and .7z files successfully. In case you are still facing the issue then please click on the following link to chat with the support :  Chat
    with an Expert
    Regards,
    Mayank

  • I try to open the program after installing it and I recieve and error message: Error: 213:11

    HELP! I try to open the program after installing it and I receive and error message: Error: 213:11

    This issue is covered under document: https://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html
    This error occurs when the SLStore Folder is set to read-only. To resolve it, remove the read-only check from the SLStore folder (Windows) or give it read/write access (Mac OS). step in the link above.

  • I installed Lightroom CC successfully but cannot open the program. What can I do?

    Dear colleagues,
    I installed Lightroom CC successfully but cannot open the program. What can I do?
    Thanks for you help.

    Puttetorpa
    The situation with Premiere Elements 8.0/8.0.1 and version earlier than it (in particular 3.0/3.0.2) is disturbing with regard to MPEG2 Activation.
    Adobe document says that it no longer supports MPEG2 Activation for versions 8.0/8.0.1 and earlier and points the users of this group of products to a version later than 8.0/8.0.1, the current latest version 12.
    But, I am not sure of the real answer. The doubts are cast by the findings of some who have claimed to have solved the problem using a uninstall/ccleaner/reinstall scheme when they have been met by the MPEG2 Activation issue.
    But, I would ask....Do you have the latest version of QuickTime installed on your Windows 7 64 bit computer? And, are you working with version 3.0 as the 3.0.2 Update?
    Is it still possible to run your Premiere Elements 3.0/3.0.2 on the prior computer on which it was installed?
    Also, does your Windows 7 64 bit come with Windows XP Mode
    Install and use Windows XP Mode in Windows 7
    which is essentially a virtual Windows XP Professional SP3 32 bit.
    As last resort, and highly experimental, but would you have time to experiment by replacing your latest version of QuickTime with the QuickTime Alternative 1.8.1 and then determining what happens with your Premiere Elements 3.0/3.0.2  Windows 7 64 bit situation? Do not bother with the MPEG Streamclip program download, just the QuickTime Alternative 1.8.1.
    http://www.squared5.com/
    Please review, consider, and do what you feel comfortable with. We will be watching for your progress.
    Thank you.
    ATR

  • I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloa

    I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloaded the numbers app thinking this would be a default software to open any and all spreadsheets.
    Please Help!
    Ipad 2- iOS5

    You may need a version without macros on it. Unfortunately, pretty much all apps are skinned down versions of their original program, often with less functionality. For example in a word document I can italicize,bold and underline, but I only have a handful of fonts to play with and I don't think I can insert tables or images.
    It is very possible that the app simply cannot run macros, which means that document may never work on an iPad.

  • Fix for iTunes and Stuttering Audio Upon Opening Other Programs

    This was answered for me in another mega thread, so I thought I would create it's own topic in hopes of helping as many people as possible.
    This is a fix for those that have the problem of iTunes 7 working fine alone, but when opening another program such as a game, etc., iTunes 7 begins to stutter and crackle. This fix assumes that otherwise, the program works correctly (gapless, and other issues are not a problem, no blue screens of death, etc.)
    First off my machine:
    Dell XPS 3.4 ghz Pentium Dual Core
    2 Gig RAM
    Creative SB X-Fi audio card, latest drivers installed
    Observed problem:
    Running iTunes 7, audio sounded fine, but opening another program such as UT2004 (first person shooter game) caused iTunes 7 to stutter and crackle.
    This was not an issue in iTunes 6.05. I had to upgrade as I just purchased the new Nano.
    As an aside, I have another sound card on my computer, an older Layla Echo 24 professional soundcard, drivers are about 3 years old. When selecting this card, this problem does not occur.
    The Fix:
    Close iTunes 7
    Upgrade your sound card drivers (just to eliminate that as an issue)
    Upgrade to latest Microsoft direct X version:
    http://www.microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A -9B6652CD92A3&displaylang=en
    Start
    Run
    Type: dxdiag
    Click "sound 1" or similarly named tab
    Slide bar to "basic acceleration" (mine was at full, and basic is two clicks to the left)
    Exit
    Restart iTunes 7, and startup music
    Open game, or other program
    Your music in iTunes 7 should now be stutter/crackle free
    This may not work for everybody, but it worked for me so I thought I would pass this along.
    Good luck!
    (resisting urge to type some snarky remark to Apple that somehow their programmers are indeed as human as Microsoft programmers)...oops...sorry about that.
    Dell XPS Windows XP Creative SB X-FI Audio Card
    Dell XPS   Windows XP  

    i was hopeful, but it didn't work. well teh one thing that i had to do diff was the dx updating, WGA doesn't like to work on my system for some unkown reason (yes it was bought at a store) so i found a way around their WGA check for it (i think) the one i got was labeled as dxwebupdate for august 2006. it updated just fine and it looks like it should be the same one as the newest update release microsoft sent out
    my system is a home built one and haven't had probs with itunes with any other version, until this one. i'm tempted to just go back to the newest version 6 i have, cause this is rediculous. i can't do anything without it sputtering away at me. i tryed uninstalling it and removing every trace of its exsistance off of the system (including registry) and that didn't work i made sure all numbers were set to the correct values for my sound blaster audigy gamer, i was using some non oem drivers, but switched over just to make sure witht eh newest ones creative had, and it made zero diff.
    i'm wondering if it is an issue it is having with sound blaster cards...
    well anyways if anyone else has any ideas i would like to hear them

  • I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

    I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

    Thanks for the help. I installed CC and it fixed everything but Photoshop. I guess I will have to use my old laptop for images until Adobe fixes the problem. Do you know of a place where we can send issues like these to Adobe?

  • When opening the program LR 5 encounters an error when reading from it's preview cache.

    When opening the program LR 5 encounters an error when reading from it's preview cache. It says it will correct the problem when it re opens. Why does this happen and how do I correct it?

    It means there is an issue with the preview cache.
    If it persists after closing and re-opening Lightroom then you will need to delete the preview folder.
    There is no permanent harm and Lightroom will regenerate the previews on an asneeded basis or the whole image collection if you ask it.
    The previews folder exists in the Lightroom folder and has the name "Your catalog name PREVIEW.LRDATA".
    Make sure it is the the correct folder before deleting it.
    Tony Jay

  • I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of

    I wanted to know explain my problem down package cc2014 where I put the serial number of the problem that I have is that when you open the program asks me start of session in which he put it and go but back inside and it drives me to request the start of session and I take 3 weeks or more with this problem if they can support me solve it was the number of seire wearing this being installed at a private university

    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page

  • What do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated-- and now they are gone!!!!!! WHat do i do!!!!!!

    what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!!  Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto

    You should get your keyboard checked as it's repeating  on a lot of keys and makes you look silly.
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

Maybe you are looking for

  • Acrobat 9 (CS4) Freezes when pressing 'Print' button

    Hi all, I am having a problem with Acrobat Pro 9.0.0 in that when I go to print (with any setting/printer etc) selected, the dialog freezes after pressing the 'Print' button. Therefore I must force-quit to start Acrobat again. I have tried trashing t

  • Compatibility with Adobe software

    I've been using Photoshop and Canon EOS cameras for years.  Moved over to iMac about 5 years ago.  So I'm reasonably conversant with the first two areas but by no means am I the world's expert on using Macs - I use it mainly for Photoshop and interne

  • Question about TIFF file format

    None of the forums seems to be right for my question, this one seems the best suited... Why does Mac still use the TIFF file format for things like Grab, etc.? JPG is a more commonly used format, but I do understand why the TIFF file format is better

  • MacOS X 10.2.4 as a WebDAV Client

    Is there a special tweak to the config files to support MacOS X10.2.4 as there is with Apache 2?           Please CC any replies directly to me as I'm on an extremely short timeline.           

  • Sql sum question

    I need to produce a CF report only showing the top five suppliers, plus other information. I count each supplier, with group by, then sum the count, with group by, to get the total occurrances of each supplier. My query/subquery is something like thi