Issues performing currency conversion

Guys while i am trying to run default currency conversion the package status shows as ( CANCELLED) not error or even completed which i came across for the first time. I checked all my DIM and data files. Can anyone help on this issue.
Also i would like to know that how do you run 2 application 1.) finance 2.)  Rate in a single report(evdre)...
Experts please HELP.

Hey Nilanjan thanks
That is not the issue with currency conversion. I checked whether it performed the currency conversion after the package status showed cancelled but it did not. Now i made some changes to the FX trans logic and it is showing an error that          ""Task name LOAD:""
""Error running default logic (Member "LC" not exist)"""
I have maintained LC in data file as well as RPT currency DIM.
Regarding the 2evdre in single report.
When i create a report using =evdre() it opens a finance report if in my CV i have selected finance app.
When i am in RATE app it creates Rate report.
My question was how do i get the both in single sheet or even different sheets, because when i open finance report and then try and change the application to rate and then click expand all the previously created report is also converted to finance.
I hope oyou understand and help me out.
Thanks always.
Dharmik

Similar Messages

  • Issue regarding currency conversion

    Hi Experts,
    I'm having issue with currency conversion. Default report output values are displaying in 'EURO' and I had created a toolabar with currency conversion buttons. When this button is selected, values has to be changed into user select currency like INR, USD, AUD. Here im triggering with issues, all the values are converted into 0's. Total value is only converting for first time. From next time. its not converting. I'm using FM's  CONVERT_FOREIGN_TO_FOREIGN_CUR,CONVERT_TO_LOCAL_CURRENCY,READ_EXCHANGE_RATE.
    Please provide ur solutions to solve the issue.  
    Thanks and Regards,
    Bharat

    Hi ,
    You can use this block of code..It is used in our project.
      data : l_rate type ukurs_curr,           "Exchange rate
             l_rate_type type kurst_curr,      "Type of rate
             l_l_fact type i,                  "Local factor
             l_f_fact type i.                  "Foreign factor
    check local currency ,foreign currency local amount are not initial
      check foreign_currency is not initial and
            local_currency is not initial and
            local_amount is not initial.
    Calculate exchange rate
        if local_currency = 'MXN' and foreign_currency = 'USD'.
          l_rate_type = 'MXNT'.
       else.
         l_rate_type = 'M'.
       endif.
    *Call FUNCTION module to get exchange rate
      call function 'READ_EXCHANGE_RATE'
        exporting
          date                    = sy-datum
          foreign_currency        = local_currency
          local_currency          = foreign_currency
          type_of_rate            = l_rate_type
       importing
         exchange_rate           = l_rate
         foreign_factor          = l_f_fact
         local_factor            = l_l_fact
       exceptions
         no_rate_found           = 1
         no_factors_found        = 2
         no_spread_found         = 3
         derived_2_times         = 4
         overflow                = 5
         zero_rate               = 6
         others                  = 7
      if sy-subrc eq 0.
    if l_rate le 0.
      l_rate = l_rate * -1.
    endif.
    Foreign amount
      if l_rate_type = 'MXNT'.
        foreign_amount = local_amount / l_rate .
      else.
        foreign_amount = local_amount * l_rate .
    endif.
      endif.

  • Currency conversion JPY to USD issue

    Hi Friends ,
    I am facing an issue while currency conversion from JPY to USD . I have defined currency conversion type in RSCUR , it is working fine for all other currencies except JPY . I have the exchange rate maintained in TCURR but still it shows exchange rate not maintained while running the query  . Could  you please tell what can be possible reasons for it .
    Thanks in Advance .

    Hi,
    Check the time reference based on which the currency conversion rate is maintained. Run function module READ_EXCHANGE_RATE by giving the date, JPY to USD and check if returns values.

  • Currency Conversion for billing doc and after user exits in COPA

    Hello Friends,
    Need your view on this issue:
    1. Company codes currency and Operating currency is different., Costing Based CO-PA.
    2. Value filed "Gross Sales" get posted via Billing doc. In case of correction billing or re-posting (after reversal of original one) of billing doc value
    field "Gross sales" get posted based on exchange rate of original (very first) posted document because system is updating "Translation date"
    in table BKPF from very first document posted and not taking current date as a translation date. SAP standard program is  reading "Translation date" from BKPF to chose exchange rate and valuating "Gross Sales" on that ex.rate.
    3. Some user exits in COPA valuation to populate some values for other value field (Example - Gross Sales value should populate in value field
    "Sales ASP"). After valuation in exits, SAP standard program is re-valuating value fields value (program statement is : perform currency conversion for fields that were changed in exit ) and for this valuation system is taking posting date for exchange rate.
    Due to above logic company code currency value is different in Gross Sales and Sales ASP.
    Requirement is : Sales ASP value should be same as Gross Sales.
    Can you please share your thought to find the solution.
    Thanks
    Ravi

    Check if the currency key and the unit of measurement are filled in (these will be the reference fields specified in the field definition of the structure at the database level).

  • Currency conversion not working for foreign entity

    I am having an issue with currency conversion not generating the correct values for foreign entities. For entities where the currency is USD, I am able to see the LC amount being written to USD. However, for entites that have currencies other than USD, I just see zeros. I have double-checked to make sure that rates exist for the given currencies. Below is the logic script I am using which is a modificatio nof the multicurrency.lgl. Any help would be greatly appreciated.
    // filter the appropriate currencies and rates
    *SELECT(%REPORTING_CURRENCIES%, "[ID]", "RptCurrency", "[REPORTING] = 'Y'")
    *SELECT(%FX_RATES%,"[ID]","RATE","[GROUP]='FX RATE'")
    // set the appropriate region to clear
    //(all reporting currencies)
    *CLEAR_DESTINATION
    *DESTINATION RPTCURRENCY=%REPORTING_CURRENCIES%
    // load the rates from the RATE cube
    *LOOKUP RATE
    *DIM RATESRC="RATECALC"
    *DIM Rate=ARFIELD.RATETYPE
    *DIM SOURCECURR: INPUTCURRENCY=LOC_MILLOTH.CURRENCY
    *FOR %CURR%=%REPORTING_CURRENCIES%
    *DIM %CURR%:INPUTCURRENCY="%CURR%"
    *NEXT
    *ENDLOOKUP
    // define the translation rule
    *WHEN ARFIELD.RATETYPE
    *IS "NOTRANS"
    // translate
    *IS %FX_RATES%
           *FOR %CURR%=%REPORTING_CURRENCIES%
               *REC(FACTOR=LOOKUP(SOURCECURR)/LOOKUP(%CURR%),RptCurrency="%CURR%")
           *NEXT
    *ELSE
           *FOR %CURR%=%REPORTING_CURRENCIES%
               *REC(RptCurrency="%CURR%")
           *NEXT
    *ENDWHEN
    *FOR %CURR%=%REPORTING_CURRENCIES%
             [RptCurrency].[#%CURR%]=null
    *NEXT
    *COMMIT
    Regards,
    Karen

    Hi Karen,
    I'm no script logic expert so I won't comment on your code. If it's working for USD then the code is probably fine.
    There are a few other things you could check (these are based on investigation using the standard multicurrency script). They should line up with the standard Finance application from AppSet
    In the InputCurrency dimension for the currencies you want to convert into :
       Check property Reporting is equal to "Y"
       Check property Group is set to "Report"
       Check propoerty MD has a value of "M" or "D"
    In the RptCurrency dimension you need to have entries for the the currencies you want to convert into (AppSet only has USD and EUR to start). Also for each of the currencies :
       Check property Reporting is equal to "Y"
       Check property Group is equal to "Report"
       Check property Transfer is equal to "Y"
    I'm not convinced that the Transfer value is required but from my testing if you get the above set up and use the standard multicurrency script it will work.
    The testing I did was translating into USD, EUR, GBP, CHF, AUD etc
    Hope this helps.
    Thanks.
    Bradley Newcombe.
    Edited by: Bradley Newcombe on Apr 28, 2009 1:30 PM

  • Currency Conversion loading...

    Hi All,
    I am going to perform currency conversion via update rule.  I understand now to write the code in the start routine of the update rules.  Some basic questions below:
    1. How is the exchange rates loaded to BW?  Via the transfer global settings?
    2. How often do you load exchange rates in BW?  What is typical?
    3. Where in BW can I check the exchange rates?
    4. Let's assume the rates are loaded to BW.  Now, a dataload comes in and the currency conversion takes place in the update rule to the Cube.  Let's say that 1 Euro = 1.15 USD on 1/19/06.  So all data loaded to the Cube on 1/19/06 will get this exchange rate.  Now, on 1/20/06 new rates are loaded and the conversion is now 1 Euro = 1.50 USD.  So the next InfoPackage load will get these new rates?
    Is this incorrect, or does the exchange rates in BW all have dates, so depending on the date of the document being loaded to the Cube the correct exchange rate is read to equal this date.  Example document date = 1/19/06 so it gets the exchange rate 1/19/06, where all documents that are 1/20/06 will get exchange rates equal to 1/20/06???
    Please excuse my ignorance on this subject.  My invovlement with BW in the past has not involved currency conversion...until now
    Cheers,
    Mike

    Hello MIke;
    Go to T-code RSA1 > Sourec Systems > Transfer Exchange Rates > in the menu Program > Execute in Background > It brings up a screen for print parameters, but the settings apply to schedule this job as required.
    The update of exchange rates is updating tables TCURR and TCURV. If you run at the same place the transfer of global settings, the tables TCURF, TCURS, TCURT, TCURV, TCURW, TCURX, TCURC and TCURN are updated.
    For details check the programs RSIMPCUST (global settings) vs. RSIMPCURR (exchange rates).
    Also if you see these tables for example TCURR then you will see the exchange rate type which you will be using according to your business scenarios and the pick the exchange rate from the tables.
    Pls assign points if this hleps.
    Regards:
    BK

  • Currency conversion issue while creating PO from Shopping cart

    Hello Experts,
    I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
    Scenario:
    Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
    But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
    the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
    Please give me some idea how to fix this issue.
    Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
    Regards
    Pratap J

    Hello,
    Read information available in KBA 1862453.
    It mentions this issue.
    Regards,
    Ricardo

  • Currency Conversion Issue

    HI experts,
    i have an issue with my currency report,
    where user want see the sales volume data converting from CAD to US $.
    when i checked the query the conversion type is Avg rate M source to CAD and the Target currency is CAD only.
    but when he execute the report he want to see the volume data in USD $.
    and when i execute the report i can see below error.
    Could not find any data to display. This might be due to the current selection of variable or filter values.
    can some please help me out this issue.
    thanks
    Raj

    Hi venu
    thanks for the post,
    there's no selection criteria being used by the user, has web link, once he click on link, he directly checking the report.
    so there's no section screen available.
    and there's no variable created for the  currency conversion type .
    here my requirement is to display currency in USD $ from CAD $.
    target currency maintained as CAD in RSCUR tcode.
    how would i do this,
    and again the same report is being used by CAD user also, so view shouldn't be change for the both users.
    what im thinking is
    is there any possibility to create variable on currency to select the required currency dynamically by user in selection screen
    please let us know possible solutions like without changing the view for CAD users
    please let me know for more info
    regards
    raj

  • Currency Conversion issue for YTD model

    Hello,
    Currently our Client is using YTD (year to date) model to maintain data into BPC 7.5NW, and planning to use BPC for currency conversion from LC to USD. They are not converting the values in Transactional system. When performing this all Balance sheet accounts will be using YTD model for conversion, but income statement accounts should be using Periodic values for conversion.
    We have two different Entity FX types: one is USDFNC - USD functional and NUSDFNC - Non USD functional. One of the differences between these two FX types is CTA account, USDFNC is using expense Account to Book CTA and NUSDFNC is using Equity Account to book CTA.
    To achieve the above mentioned requirement, I did configure BPC as follows:
    1) Use RATE type AVG (average for Income statement accounts)
    2) Use RATE type END (spot rate for Balance sheet Accounts)
    3) In business rules for Account rate type AVG- formula would be [AVG], apply to periodic flag will be checked.
    5) in business rules for Account Rate Type END - Formula would be [END], apply to periodic flag will be blank.
    6) To calculate CTA for ENTITY FX type- NUSDFNC, I configured the following in Account Rate type AVG - destination account is equity account, Formula is [END]-[AVG], apply to periodic flag will be blank and Entity FX type is NUSDFNC.
    7) To calculate CTA for ENTITY FX type- USDFNC, I configured the following in Account Rate type AVG - destination account is expense account, Formula is [END]-[AVG], apply to periodic flag will be blank and Entity FX type is USDFNC.
    Above configuration is giving me correct converted result for all Balance sheet accounts and income statement accounts are showing the correct values when I use the formula (current period LC amount-previous period LC amount)*(current period AVG rate). But I saw difference in Balance sheet, so further analyzed CTA (currency Translation Accounts) and found that the difference is because of CTA amount only. Similar CTA differences exist for both USDFNC entities and NUSDFNC entities. So, I think my logic to calculate CTA is not working.
    I am using the standard script logic to run Currency Conversion:
    *RUN_PROGRAM CURR_CONVERSION
         CATEGORY  = %CATEGORY_SET% 
         TID_RA = %TIME_SET%
         CURRENCY = %RPTCURRENCY_SET%
         RATEENTITY = GLOBAL
    *ENDRUN_PROGRAM
    *COMMIT
    Can any one help me to understand whether this configuration is correct? I feel that I may need to change the logic for calculating CTA. But not sure about what and where
    Edited by: amarnathputta on Nov 24, 2011 5:36 AM

    Thank you Ethan,
    Let me try to explain this with few dollar amounts:
    Let us consider that I have data for 1st month (Jan) of the year 2011,
    Net income for Jan. 2011 in LC = 59916152.19
    Net income for Jan. 2011 in USD calculated using Average rate is  = $ 9,223,013.14
    CTA for the same month is  (net income in LC X spot rate) - net income in USD at average rate =((59916152.19)*(0.154617))-9223013.14 = 41,042.564
    This value is correct.
    For the month of Feb 2011:
    Net income for Feb.2011in LC = 60415519.01
    Net income for Feb.2011 in USD at average rate (with periodic flag on) = 9,300,112.38 ( I calculated this value manually and it is correct after conversion)
    calculated CTA for the same month is (60415519.01*0.154083)-9300112.38 = 8,892.035.
    But actually BPC calculated CTA is 18,547.56 (I felt that this may be because I am not using the Flag apply periodic value while calculating CTA and when I flagged that, BPC is giving me a very big difference in CTA)
    My balance sheet is exactly off with the difference in CTA.
    Hope this helps you to understand my problem.
    Edited by: amarnathputta on Nov 25, 2011 2:43 PM

  • Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

    Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
    Please help me in following aspects.
    1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
    2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
    3) We have verified in both BI side(currency tables) and even ECC side.
    Please help me in understanding this issue and let me know if you need more information on this.
    Its an production issue and appreciated your immediate inputs.
    Thanks
    Kiran

    Hi Arun,
    The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
    EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
    CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
    UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
    EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
    Kind Regards,
    John Harris
    Senior Support Engineer, SAP Active Global Support

  • Currency Conversion Issue in Infocube Purchasing Data (0PUR_C01) Routine

    Hi Gurus,
         We are using SAP BI 7.0, We are having reports on Purchasing Data (0PUR_C01) under that 2 updates rules are there.
    For the field Effective purchase order value (0ORDER_VAL), there is one standard routine only from the Datasource 2LIS_02_SCL.
    My problem is that when there is Currency other than Local currency in field Order Currency, we dont get the Purchase Order Value though there is PO Quantity.
    Thanks in advance.
    Regards,
    Rajdeep.

    Hi Rajdeep,
    Please verify that the PSA contains data in the fields mapped to the objects below, as they are all used in the currency conversion routine:
    ORDER_VAL
    DOC_DATE
    ORDER_CURR
    LOC_CURRCY
    EXCHG_RATE
    If something is mapped incorrectly or something like that the currency conversion might fail.
    Hope it helps.
    BR
    Stefan

  • Currency Conversion issue in BW reporting

    Hello Experts - I have a Revenue KF in COPA cube. For one specific record the currency type is TWD. When I run the report using the Key Figure (along with other Chars), the value is multiplied by 100. I do not have any scaling factor set at the report level or currency conversion set for the Key Figures. It works fine for other records with other currency types. Does it has any thing to do with the TCURF / TCURV tables? Appreciate your help.
    Rgds,
    Venu.

    Hi Venu,
    For different currency types there are scaling factors set by default. When you will run the report, the displayed result is calculated with the scaling factor.
    Regards,
    VA

  • Currency Conversion BPC 7.5 NW

    Hello Everyone,
    I have an issue with the currency conversion functionality.
    I know there were lot of discussion about FXTRANS topic. However, I am facing an issue while running the package:
    Application: Package Status Error".
    Exception occurred when running programs"
    I checked the CT configuration document, dimension properties, rule, logic etc. Not able to trace anything.
    I am performing the test on BPC 7.5 NW SP -7
    I run transaction UJKT, following is the message obtained:
    UJK_EXECUTION_EXCEPTION:BADI parameter error: "CURRENCY CONVERSION"
    "Currency Conversion" is the name of the package
    Can you please provide your inputs?
    Thanks in advance
    RJ
    I resolved the issue. One of thee dimensions, category used in Rate Application and consolidation application was different.

    Hello Everyone,
    I have an issue with the currency conversion functionality.
    I know there were lot of discussion about FXTRANS topic. However, I am facing an issue while running the package:
    Application: Package Status Error".
    Exception occurred when running programs"
    I checked the CT configuration document, dimension properties, rule, logic etc. Not able to trace anything.
    I am performing the test on BPC 7.5 NW SP -7
    I run transaction UJKT, following is the message obtained:
    UJK_EXECUTION_EXCEPTION:BADI parameter error: "CURRENCY CONVERSION"
    "Currency Conversion" is the name of the package
    Can you please provide your inputs?
    Thanks in advance
    RJ
    I resolved the issue. One of thee dimensions, category used in Rate Application and consolidation application was different.

  • Currency conversion - Line item total does not tally with account balance

    hi guys!
    we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
    1. while trying to run program RFSEPA02 the following error is appearing-
       -Line item total does not tally with account balance
    2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
    3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

    put a break-point @
    if t_balance_items_hw[] <> t_balance_account_hw[] or
         t_balance_items_tw[] <> t_balance_account_tw[].
        perform dequeue_account.
        message e099.
    *   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
      endif.
    endform.                               " CHECK_ACCOUNT_BALANCE_2
    and debug y it is getting the error.
    Short text
    Switch On Open Item Management by Changing Master Record
    Description
    This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
    Requirements
    No items can already be archived from this account.
    Caution: Company policy must be in place to ensure that this does not happen.
    Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
    Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
    The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
    Output
    When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
    Regards
    Prabhu
    Message was edited by: Prabhu Peram

  • Help needed with Include ZXRSRU01 in relation with currency conversions

    I'm implementing how to paper: Use variable time references in currency conversions (BW 3.3). When implementing variable exit RSR00001 & write include ZXRSRU01 an issue pops up.
    The relevant code is:
    <i> DATA: l_s_var_range TYPE rrs0_s_var_range.
    IF i_s_rkb1d-infocube EQ 'RHCURCON'.
        IF i_step = '3'.
          LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam EQ 'ZCURDAT'.
            ZCL_IM_CURRCONV=>currdate = l_s_var_range-low.
          ENDLOOP.
        ENDIF.
    ENDIF.</i>
    When implementing the following message pops up:
    "l_s_var_range" has already been declared.
    In another statement ' l_s_var_range ' is already used.
    Any advice how to deal with this issue?
    thanks in advance
    tom

    Hi,
      somebody already declared that workarea (l_s_var_range), so you can directly use that without any declaration (data l_s_var_range type rsr0_.....). you can remove that statement and you can work.
       Otherwise if you want to use to declare your own workarea,
      data ls_range (or any name) type rsr0_....
    DATA: l_s_var_range TYPE rrs0_s_var_range. *** this statement you can remove since somebody declared the same.
    ****or use ur own work area name and use that work area within your code.
    data ls_var_range type rrs0_s_var_range.
    IF i_s_rkb1d-infocube EQ 'RHCURCON'.
    IF i_step = '3'.
    LOOP AT i_t_var_range INTO ls_var_range WHERE vnam EQ 'ZCURDAT'.
    ZCL_IM_CURRCONV=>currdate = ls_var_range-low.
    ENDLOOP.
    ENDIF.
    ENDIF.
    rgrds,
    v.sen.
    Message was edited by:
            Senthilkumar Viswanathan
    Message was edited by:
            Senthilkumar Viswanathan

Maybe you are looking for