Issues regarding fonts, network

Hello Everybody.
I am new to Arch Linux. I have used Ubuntu before. I have installed Arch last night with KDE. And I am facing some problems to get familier with it. So, here are few 'issues' and I hope, you guys would help me to get started diving in the Arch world.
I am using my android phone (Samsung galaxy fit - S-GT-5670) as a modem for the Internet.
However, android phones uses 'usb-tethering', I have already configured system to use it. But, for every time, I should enter :
#dhcpcd usb0
To get started. and I want to make this to automate.
The next one is the KDE uses really thin fonts. Actually, I have used Ubuntu for a long time, and It's (KDE's fonts) kind of hard to see. I don't have any idea to make them look like Ubuntu or whatever but smooth for eyes. My monitor is running at 1440x900 resolution with 75Hz frequency (And that is fine, same like Ubuntu)
One more feature that I want is the 'spell-check'.
I hope, you help me reslove this..

Hello,
You can make your fonts look almost / exactly like in Ubuntu (there are a few notable ways of improving font rendering, see Fonf Configuration for details.
Have fun with Arch.

Similar Messages

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Issue in the network table

hi all
After deleting the network from the wbse i can't able to open that wbse i am getting the following abap runtime error
long text of error message:
Diagnosis
    A necessary database entry for one or more than one networks is
    missing in the project.
Message class....... "CNPB"
Number.............. 012
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Program                                 SAPLCNPB_H
Include                                 LCNPB_HF0Z
Row                                     147
Module type                             (FORM)
Module Name                             NETWORK_DO_SELECT
in this when i am going for create new network in the same name i can't able to ,and when i am going in the change mode also i can't able to find that network
but same network is exits in the table aufk.
Please help to solve the above issue
Regards
Sen

please refer sap note 457818.
hope it helps.

Doubts regarding WAN Network sizing formula parameters

Hi
We have used the following SAP document - Front end requirements for SAP Business solutions
We have some doubts regarding the formula. Sometime we have the feeling it does not address very well issues as user's concurrency, WAN Optimization and contingency. However, it might be only that we are not using correctly the formula, so we would like to confirm some information regarding the parameters.
C = X * N * D * 0.25
The parameters are as follows:
C: Bandwidth in kbps that is needed for the SAP GUI
X: Amount of data per dialog step in kilo bytes
N: Number of active users (independent of the number of sessions)
D: Average number of dialog steps per minute per user7
Numerical factor: ~0.25 = 8 (kb/kilo bytes ) * 1.25 (protocol overhead) * 1/60 (min/s) * safety factor
1.58 (response time, peak load, different technologies)
The number of active user is the average number of concurrent users (from the total number of users) which are using the network? Therefore, we should calculate first the concurrent users number?
Does any body knows what is the reasoning behind the Numerical Factor and the safety factor? It is a contingency factor? It is related with a network bandwidth contingency?
Has anyone apply WAN Optimization?
Has anyone apply any additional contingency measure additional to the safety factor?
Kind regards
Gonzalo Pérez-Prim

Hi Gonzalo,
As you said, the number of active users is the mean number of concurrent users, since idle users don't normally need bandwidth.
I think that safety factor is an estimated number provided by SAP engineers to increase the final amount, just in case you have different issues that could lead to a lower network transmission rate. As it's a general estimation, please take into account that the particular issues of your network can have some influence in the speed calculation.
Please take into account that maybe you want to switch the option "slow network connection" in SAPGUI, just to decrease the ammount of traffic between frontends and server.
Hope this helps
Best Regards
Francisco

Are there any issues regarding running Labview on Windows Vista

I am a cognitive psychology graduate student, and I am considering switching to LabView to display stimuli and gather RT data. I have previously used E-Prime for this task, but E-Prime doesn't seem to run well with Windows Vista. Are there any known issues regarding running LabView with Windows Vista?
Thanks
Chris

I've had no problems on Vista*. Only issue I've had was concerning how Vista uses fonts, but if you start on Vista and don't switch between XP and Vista, etc., then you'll be OK.
*no problems with LabVIEW's compatibility with Vista. Now, Vista in general, that's another story and not for this thread/forum.
Richard

Just another issue about fonts and Firefox

Hello
I know that new topic about fonts, firefox etc. shows once at week but ...
See at my probem:
Firefox@ArchLinux part 1
http://img265.imageshack.us/img265/4097/linuxl.png
Firefox@Windows 7 part1
http://img21.imageshack.us/img21/4931/beztytuujvc.jpg
Firefox@Archlinux part2
http://img265.imageshack.us/img265/4615/linux2.png
Firefox@Windows 7 part2
http://img515.imageshack.us/img515/2271/schowek01l.jpg
Firefox@Archlinux part3
http://img252.imageshack.us/img252/574/linux3.png
Firefox@Windows7 part3
http://img526.imageshack.us/img526/6428/schowek01g.jpg
Like you saw in images above, page under Firefox at my Arch looks ugly, but not every (eg like http://bbs.archlinux.org looks okay).
My ~/.fonts.conf. (It's from this forum, i think from user @berbs - his one of xorg_font guru )
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>


<alias>
<family>serif</family>
<prefer>
<family>DejaVu Serif</family>
<family>Bitstream Vera Serif</family>
</prefer>
</alias>
<alias>
<family>sans-serif</family>
<prefer>
<family>DejaVu Sans</family>
<family>Bitstream Vera Sans</family>
<family>Verdana</family>
<family>Arial</family>
</prefer>
</alias>
<alias>
<family>monospace</family>
<prefer>
<family>DejaVu Sans Mono</family>
<family>Bitstream Vera Sans Mono</family>
</prefer>
</alias>

<selectfont>
<rejectfont>
<pattern>
<patelt name="scalable">
<bool>false</bool>
</patelt>
</pattern>
</rejectfont>
</selectfont>

<match name="family" target="pattern">
<test name="family" qual="any">
<string>Luxi Sans</string>
</test>
<edit name="family" mode="assign">
<string>Liberation Sans</string>
</edit>
</match>

<match target="font">
<edit name="embeddedbitmap" mode="assign">
<bool>false</bool>
</edit>
</match>

<match target="pattern" name="family">
<test qual="any" name="family"><string>fixed</string></test>
<edit name="family" mode="assign"><string>monospace</string></edit>
</match>





<match target="font">
<edit name="rgba" mode="assign"><const>rgb</const></edit>
<edit name="autohint" mode="assign"><bool>false</bool></edit>
<edit name="antialias" mode="assign"><bool>true</bool></edit>
<edit name="hinting" mode="assign"><bool>true</bool></edit>
<edit name="hintstyle" mode="assign"><const>hintmedium</const></edit>
<edit name="lcdfilter" mode="assign"><const>lcddefault</const></edit>
</match>




<match target="font">
<test name="weight" compare="more"><const>medium</const></test>
<edit name="autohint" mode="assign"><bool>false</bool></edit>
</match>


<match name="family" target="pattern">
<test name="family" qual="any">
<string>Courier</string>
</test>
<edit name="lcdfilter" mode="assign"><const>lcdlegacy</const></edit>
</match>

<match name="family" target="pattern">
<test name="family" qual="any">
<string>Courier New</string>
</test>
<edit name="lcdfilter" mode="assign"><const>lcdlegacy</const></edit>
</match>

<match name="family" target="pattern">
<test name="family" qual="any">
<string>Candara</string>
</test>
<test compare="less_eq" name="size">
<double>10</double>
</test>
<test name="weight" compare="more">
<const>medium</const>
</test>
<edit name="embolden" mode="assign">
<bool>true</bool>
</edit>
</match>

<match target="font">
<test compare="eq" name="family">
<string>Consolas</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintslight</const>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Inconsolata</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintslight</const>
</edit>
</match>

<match target="font">
<test compare="eq" name="family">
<string>Andale Mono</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
<test compare="less" name="weight">
<const>medium</const>
</test>
<test compare="less_eq" name="pixelsize">
<double>7</double>
</test>
<edit mode="assign" name="antialias">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Arial</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
<test compare="less" name="weight">
<const>medium</const>
</test>
<test compare="less_eq" name="pixelsize">
<double>7</double>
</test>
<edit mode="assign" name="antialias">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Comic Sans MS</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
<test compare="less" name="weight">
<const>medium</const>
</test>
<test compare="less_eq" name="pixelsize">
<double>7</double>
</test>
<edit mode="assign" name="antialias">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Georgia</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
<test compare="less" name="weight">
<const>medium</const>
</test>
<test compare="less_eq" name="pixelsize">
<double>7</double>
</test>
<edit mode="assign" name="antialias">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Impact</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Times New Roman</string>
</test>

<edit name="lcdfilter" mode="assign"><const>lcdlegacy</const></edit>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Trebuchet MS</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
<test compare="less" name="weight">
<const>medium</const>
</test>
<test compare="less_eq" name="pixelsize">
<double>7</double>
</test>
<edit mode="assign" name="antialias">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Verdana</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
<test compare="less" name="weight">
<const>medium</const>
</test>
<test compare="less_eq" name="pixelsize">
<double>7</double>
</test>
<edit mode="assign" name="antialias">
<bool>false</bool>
</edit>
</match>
<match target="font">
<test compare="eq" name="family">
<string>Webdings</string>
</test>
<edit mode="assign" name="hintstyle">
<const>hintfull</const>
</edit>
</match>
</fontconfig>
My xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Wed May 27 01:58:49 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
DisplaySize 444 277 # 96 DPI @ 1680x1050
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoDDC" "true"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable" # for 3D, alpha desktop effects
EndSection
Section "DRI"
Mode 0666 # helps flash performance
EndSection
I even used cairo,libxft,... - hacks "-ubuntu", but my issue was still there Now I have clean that packages, without "-ubuntu".
I've copied TTF fonts from W7 into my Arch.
I have up to date system under Gnome 2.28.
Sorry for my gramma

Gen2ly wrote:adding a whole slew of things probably not doing much good
Now, why on Earth would I do that? Think I'm creating this file at random?? I'm continually testing and refining the rules. The purpose of the rules is to compensate for fontconconfig's inability to do such tweaking automatically. The end result is that fonts look better - I'm surprised that I need to point this out, it should be blatantly obvious.
hintslight should be used until the mid or up to the upper 100dpi range
That's meaningless by itself, you must include pixelsize in the equation. The majority of Microsoft's fonts, as well as various other fonts, actually look better when small using hintfull.
is a hack... Simplify, simplify, simplify.
Well, yeah, of course, it would be great if fontconfig did all the tweaking for us - but it doesn't. Fonts vary greatly, so fontconfig needs to be told the best ways to render various fonts, at various sizes/weights. You don't seem to understand this point, judging by this and your other posts regarding fonts - same as skottish, IIRC. Don't you guys have eyes?
Anyway, here's my current ~/.fonts.conf, which continues to be improved.

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

SAP QM Issues regarding follow-up action after Usage Decision

Dear Gurus -
Kindly need your expertise to resolve these issues regarding follow-up action.
1. After taking the UD i need to trigger the follow-up action to send an email with the long text to a group of people. As per standard SAP the email goes to the person taking the UD. Kindly can some one explain what & where do i need to make the changes. Also please let me know what is the customized Email ID table where mail ID's will be stored which fuction module can extract.
2. Can i also use the same functionality for partial lots during inprocess inspection. I need to send an email to a group in case the valuation is rejected for that operation.
Any response is highly appreciated.
Thank You.
Edited by: sunil t on Jan 6, 2010 7:03 PM

Hi
Please go through my recent thread
Incomming Inspection Auto mail if Rejected
Regards
Sujit

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

Issue regarding job SAP_CCMS_MONI_BATCH_STARTUP_DP

Hi,
We are facing an issue regarding an event triggered job SAP_CCMS_MONI_BATCH_STARTUP_DP.
Details of the job
ABAP Program -> RSAL_BATCH_TOOL_STARTUPDISP
User -> DDIC
Job Frequency -> Event Periodic
Event -> SAP_MONITORING_STARTUP_DISPATCH
We performed Database Refresh and this job has come from Source System. We have deleted the job in Target System but after that also we are getting continuous error message in SM21.
Error message is as follows:
14:33:36 DIA 001 000 SAPSYS EA S Failed to reschedule a periodic job
14:33:36 DIA 001 000 SAPSYS EB C > Job SAP_CCMS_MONI_BATCH_STARTUP_DP
On digging down we got the below information in SM21 regarding the error:
Documentation for system log message EA S :
This message is output by one of the job schedulers active in the
system (e.g. time or event-based scheduler). It indicates a problem
related to the database. An attempt was made to reschedule a periodic
job and write the respective control data in the database. This error
occurred for one of the associated database operations (for example,
INSERT or UPDATE).
Another cause of the error is failure to generate a new job ID number.
A subsequent message will point this out.
The following courses of action are possible:
Check whether there are any other notes on this problem next to this
message in the system log, for example direct messages from the
database interface. These details generally bring you closer to the
actual cause of the problem.
The additional information for this message contains the name of the
database table for which the error occurred.
If you determine that the error occurred during the SELECT access to
table TBTCI, the internal report belonging to this background job has
been deleted. In this case, there is normally a background job in the
'terminated' status, which ended due to runtime error
'LOAD_PROGRAM_NOT_FOUND'. Delete this job to prevent further
unnecessary scheduling on the part of the background processing
scheduler. You must then reschedule the job concerned.
As rescheduling of the periodic job could not be completed
successfully, this job is not executed at first. The background
processing scheduler takes this job and attempts to schedule it again.
Depending on the repetition period, gaps in running the background jobs
can occur for successful scheduling (i.e. the background jobs that were
unsuccessfully scheduled will be missing in the job overview if their
execution date elapsed in the meantime).
Since the next start of the periodic job could not be scheduled
correctly, there is no entry in the job overview for the planned start
date.
If the system failed to generate the job ID number, you will find notes
on what to do next in the long text of the respective system log
message.
We have fixed also Background Object in SM61.
Kindly help to fix this issue. Looking forward for reply.
Thanks,
Soumya

I am also facing similar issue . I found below SM21 entries daily . becoz of this my system performance becomes slows down. no idea which tables are getting filled up due to this .
> Job SAP_CCMS_MONI_BATCH_STARTUP_DP
Failed to reschedule a periodic job
For temporary fix we have changed the below memory parameters when system performance is poor .
EM/TOTAL_SIZE_MB = 16384
ES/SHM_SEGS_VERSION = 2
ES/TABLE = SHM_SEGS
But we need to fix these system log entries as still we are getting these errors. If anybody knows the permanent fix of this error that will be great for us.
Regards
Krishna

Issue regarding consecutive run for an Interface

hi all,
i have an issue regarding an interface
if this Interface is a initial run for the file, you have to populate all the data of the people. That is , unlike other interfaces where we send only the latest record, in this interface we need to send all the records of the employees. in a employee has 10 records with different dates, we will pick up all the records greater than 1999 and pass it. whereas if there is a change in one field, then we will send all the record of that file. And If it is a consecutive run then you have to populate changes only. the following algorithm can help you in this
if intial_run EQ 'X'
transfer IT_FINALDATA to XI.
else
Declare a 2 more internal tables similar to IT_FINALDATA...for our below example let us assume that
         DATA: IT_CLUSTERDATA type standard table of IT_FINALDATA.
         DATA: IT_COMPAREDATA type standard table of IT_FINALDATA.
use the following statement to retrieve the data from cluster and comparing it
        IMPORT IT_CLUSTERDATA TO IT_COMPAREDATA FROM DATABASE indx(zn) ID 'IN_8085'.
        Compare IT_COMPAREDATA with IT_FINALDATA
If sy-subrc = 0.
Means there are no changes, and no output required
Else
Pass the data to XI interface, And store the internal table in the same INDX table, using the following statement
EXPORT IT_FINALDATA to IT_CLUSTERDATA FROM DATABASE indx(zn) ID 'IN_8077'.
Endif.
In this can we deliver the changed data at every single consecutive run.
Please let me know,
Thank Q
Rohini.

This is something where HR Interface Toolbox (PU12) can be very helpful, it will take care of changes from one run to another and you can configure it to send changes only in next run. But, you will need some ABAP in its user exits to restrict the data after 1999, and any other restrictions that you might want.

Issue regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

Issues regarding fonts, network

Similar Messages

Maybe you are looking for