Issues to apply SAP Note
We found an issue while transporting ABAP Webdynpro application that content is not completely transported to other system.
And found a note that applies to our scenario. But now we are not sure whether to apply the note to source system or target system or both?
Here is the note: 1164289
Please help.
Thanks
Hi Vikram,
Please do testing with Std. T-code - J1incert.
You could be doing testing with the z-t-code created at your end.
Regards,
Shridhar
Similar Messages
-
SOlman_setup issue at implement SAP Note Step
Hi Friends,
While i am performing the solman_setup (system preparation) facing once issue at Implement SAP Note step.
In this step while i am performing the post processing step (3rd step) giving the red signal The system only partially implemented the manual activities for note 1856234.
And i followed the note 1856234 as per the note i ran the report AI_CRM_ANALYZE_IBASE_SORTF and i got the error messages.
The Ibase component 000000000000003598 has deviceid: SID 00XXXXXXX
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
The Ibase component 000000000000003272 has deviceid: SID 00XXXXXXX Etc.
Sort string is needed!
Comp. with same device id:
Replace Sort string with (from LMDB):
And as per the note
when i am executing IB_GEN i am getting below errors.
Object not found - will be created.
No changes made; Saving not allowed
Failed to save object % 1 (Object family 7001).
Kindly suggest on this.
Thank you,
Chowdary.Please refer to SAP Notes 1694004 - Dealing with duplicate technical system names (SIDs) and 1747926 - Dealing with duplicate technical system names (old SLD)
-
Regarding applying SAP Note 1172084
Hi all,
I have applied SAP Note 1172084 - PKMC: Dump DYNPRO_NOT_FOUND for control cycles of type SeqJC through SNOTE as we are receiving run time error Dynpro Not Found...Even though it didnt solve our problem..
Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
Could you pls. help in solving the problem..
Thanks,
Subbu> Read in some site that if any changes are done to the screen, we need to manually apply the note (i.e. not through SNOTE), but i didnt find any program or function module in the source code mentioned by the note...
There are corrections in the note, if you scroll down to "correction instructions" for your release and you open it, there are 4 program changes displayed.
If you can apply the note via SNOTE and the program is still dumping I'd open an OSS call.
Markus -
Outdated prerequisit when applying SAP Note
Hi Experts,
Ask a noob question here.
When we apply SAP note, SAP may popup the window to download an outdated prerequisit. For example, when I apply note A on release 700, system may popup to let me download note B, whose fix has been included in release 700. In this case, shall I just go ahead to download the old prerequisit in order to apply the new note?
Actually I awlays download the old note in order to apply the new note. There seems to be no impact. But I want to know if there is any offical note from SAP to confirm the approach.
Many thanks!
Regards.your approach is good.. is what you should do.. just an advice.. before going to the SNOTE to implement the notes, try to trace the requirements by yourself, to know what you are applying, read carefully the notes and the pre-requisites, after this apply the notes.. this is what I always do to know the impact..
Regards..
Esteban -
I need to apply SAP notes for Object TRINT_APPEND_COMM
How to apply SAP Notes? pls guideHello,
- Transaction SNOTE;
- click on the box "SAP NOTE download";
- enter the note number;
- after the download, the note will appear in the list below; if the note has a blue arrow as a mark, then it is applyable;
- double click on that arrow;
- follow the steps on the screen (which will guide you thru the process, creating a Change Request and so on);
that's it
EDIT: i forgot you must be allowed to apply notes, e.g. you should be a thrusted and authorized user.
Edited by: Matteo Montalto on Nov 3, 2009 11:55 AM -
Dear All,
i m having ecc6 and I have to apply SAP note 1358294 on DEV,QUA,and PRD server.I read the note but i m bit confused So before applying this note i have to import patch level to SAPKH60017 ?
OR
I can directly apply this Snote.
Regards
AshokDear Subhash and Bose,
Thnx for ur valuable reply.So i dont to import any patch jst i have to apply the note?
I have to apply this note from SNOTE transaction code from 000 client. Do i have to make user in 000 client with having SAP_ALL and SAP_NEW profile.As we do during importing patches?
Or
Directly i can do from DDIC user in 000 client.Should i have take some Prerequisite like all user be locked while applying SNOTE.
Regards
Ashok -
Issue with implementing SAP note 1486147.
I am trying to implement SAP note 1486147. My software component is SAP_APPL and release is 603. But the prerequisite notes (1148361 and 1339658) are getting incompletely implemented with activation errors because of which I am not able to implement the main note 1486147.
I have created all the DDIC elements as mentioned in the note.Also created the smartform. Has anyone successfully impemented this note? Is there anything else to be done other than what is mentioned in the note?Hi,
Resolved the issues. Before applying the note i had made manual corrections in J_1IEWT_CERT because of which my system was not implementing the note. I reversed back all manual changes i had made and then applied the note. It got successfully implemented.
Edited by: lyviaCardoza on Sep 3, 2010 7:24 AM -
Applying SAP Notes or BWDK*
Hi Experts,
I had issue Info-object and SAP suggested
" Import Support Package 16 for SAP NetWeaver 7.0 BI (BI Patch 16 or
SAPKW70016) into your BI system. The Support Package is available
when Note 1074388 "SAPBINews BI7.0 Support Package 16", which
describes this Support Package in more detail, is released for
customers."
But how do i do that?
How can i import the support pack first to DEV system and test it ?
Can somebody give me step by step procedure ?
I will assign pointsHi,
Pls Go to service.sap.com/https://websmp103.sap-ag.de/notes ---> click on SAP note search under SAP Support portal,You will have to log in with a valid user id and password.
You can search notes by typing the SAP Note Number, download it & There will be instructions for applying notes.
Hope this helps,
Regards
CSM Reddy -
No default workstation application TRM on applying SAP Note 1320374
Hello Gurus,
My question, as you can see in the title is that I'm trying to apply the SAP Note 1320374 and in the step B7 it sais that you have to go to this path,
IMG--> Cross-Apllication Components -->Document Management --> Control Data --> Define Document Types
and enter:
Default Application: TRM
Dis. WS Apllic. : TRM
and some more data.
And the question is that I don't have defined 'TRM' application in my system, so I've discovered that I can create that application by going in the spro to the path "Define Workstation Apllication" but i don't know the data I have to put on it.
I would appreciate if someone let me know what is the necessary data on that application.
Thanks!Maybe if I put the full path where the Define Workstation Application is located, someone could check if has the entry TRM on it.
Path: IMG--> Cross-Apllication Components -->Document Management --> General Data --> Define Workstation Application
Any response will be highly appreciated
<< Moderator message - Please do not promise points >>
Edited by: Rob Burbank on Jan 17, 2011 4:29 PM -
Dear all,
I want to apply a sap note 1105997 on my system. I have downloaded it in tcode snote. i have some queries in this regarding.
1. I should implement this note from client 000 or my 800 client.
2. In status, it is showing status *cannot be implemented*. What should i do?
3. Tel me the step by step procedure to implement it.
4. In future, when i will implement the support pack in which it is delivered, what will i have to do?
Thanks in advance,
AnkitHello Ankit,
Here are you answers
1. You can apply the note in any client
2. That means that you can't implement the note either the note has been implemented with the support packs that you have done already or this is not valid for you version
3. Please use the following link for applying note
http://www.sappoint.com/PHPWebUI/Documents/OSS%20Note%20Application%20-%20Using%20SNOTE.pdf
4. You will need to do Modification adjustments through SPAU if any condition like this happens
Hope it helps
Rohit -
Applying SAP Notes using SNOTE
Hi,
I have question regarding transaction SNOTE.
I am applying one note in my development system. This SAP note has some manual steps, like create function module in the given function group with the given short text.
If I follow the manual steps mentioned in the note, it ask for Access key while saving the changes.
How to work on the manual steps mentioned in SAP notes?
Regards,
YogitaHello Yogia,
It doesn't make any difference. Do it as the Note has Mentioned. If system ask for the access key then you can contact your BASIS people.
They will generate a Key for you.
Thanks,
Chidanand -
Modification problems while applying SAP Note manually
Hi Guys,
I am facing some problems while applying a SAP note manually (it cannot be applied without manual changes).
There is one standard program which I am trying to change for this purpose, but it does not allow me to do so saying "Carry out modification comparison for REPS RPCT8AR1_01 first. No changes possible" !!
Now I can go to SPAU and reset the object, but it will lose all its changes which was done
by 2 SAP notes previously.
How can I apply my SAP Note without reverting the changes ? If I revert the changes, I lose
the changes for other 2 notes !!
Is there a solution for this? please help asap.
Many thanks in advance,
Sandip.If you did not modified the program manually, you dont have to worry. implement your note from SNOTE transaction.
even if you loose previous modifications, you can always get them back by going SPAU transaction and import the transport numbers.
I had the same problem but we had manual changes to the program that is why didnt allow to implement note -
Dear Expert
When I implement SAP note through t-code SNOTE, it shows an alert message "SAP Note doesn't contain valid correction instructions". How should I fix this issue? Any response is appreciated.Dear Experts
All SAP Notes I need to implement are :
1118532, 1068198, 1014997, 599812
These are all about Czech language.
Our SAP version :
SAP R/3 Enterprise 470 x 620
Any idea?? -
Gurus,
I am a Functional Consultant. I need an SAP Note to be applied to the system which most likely, basis team will do it for me. I just know the Note number. What kind of information do I need to give to the Basis Team .. just the SAP Note number would enough? Or would they need some other information.
Appreciate your help and points would be rewarded promptlyThe changes mentioned in the correction instructions of the Note are applied in your system If it relates to a change in a program, the source code gets modified accordingly.. if a new dictionary object like a table or a structure is added, the object gets created in your system.. this is usually tied to Transport request and moved from Dev to Qa to Prod as per the normal CTS process.. Occassionally, you might have to open the QA & Prod to apply the correction manually as SNOTE might not be applicable for all Notes.. but I found that to be very rare.. but quite possible..
~Suresh -
Regarding Applying SAP Note 820622
Hi,
Can any one pls let me know applying this SAP Note 820622 is suggestible in Production XI Server or not
Regards
VamsiThanks Michal,
when our SAP Security person ran Early Watch reports for PX1 show a Critical error related to a reorganization job.
Then they found this SAP Note and reviewing to apply this note, is there any harm??
So now i can suggest them to apply this Note...
Thanks so much
REgards
Maybe you are looking for
-
I inadvertently deleted 6 folders from picasa which also deleted them from my Mac. i have so many items in my trash that I do not know which they were....is there any way to track what items I placed in my trash only on today's date? since I have n
-
I have a problem with my n79. If i fill the menu for 2-3 minutes,the phone locks and nothing works,until i remove battery and open the phone again. I think it's a software problem. I try hard reset,software update,nothing works.
-
Can you split the wired network ports through a sub router in the time caps
I have recently switched my office from PC to Macs, (MacBookPro and IMac, with a Time Capsule (1Tb). I have the three wired network ports allocated to some newtwork based equipment and was wondering if I can put an network splitter in (such as a mult
-
Can anyone help me find the error in this code please? There is a code below this that sends an email, and it all works fine, but the data isnt being posted into the database for some reason (This code). <?php $con= require_once('../../connections/dj
-
Firefox is extremely slow and I am having trouble opening my college web site.