Issues upgrading Mac OS to 10.9.5?

I'm holding off on updating my Mac Pro to 10.9.5 - don't want a repeat of the 10.9.3 issues. Can anyone confirm that 10.9.5 is safe for Premiere Pro 2014?

Why up date your OS at all if you have a stable system?
Whats to gain? It wont make your Premiere experience any better and mostly likely worse.
Mac users are masochists IMHO (of course)

Similar Messages

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

Since installing Premiere Pro CC 2014 upgrade, Mac Pro jumpy video and freezes constantly

Since installing Premiere Pro CC 2014 upgrade, Mac Pro jumpy video and freezes constantly. Worked perfectly before. Anyone else finding these issues? I'm running a quad core Mac Pro, so it's definitely not the hardware.

I've maxed out the memory assignment, but this isn't a memory problem per se.
It looks like certain Premiere Pro conditions are associated with a huge increase in kernel_task memory, zeroing out any available free memory. In my case it seems to be associated with effects applied to titles or jpgs or imported psd (Photoshop) files.
Program restart pulls kernel memory back to the 1.3gb normal size.
Here's where I am at startup:
Within three minutes:

Upgraded Mac OS to 10.5.8, now Photoshop 7.0 won't open

I reinstalled the program, and still it gives me the message "An unexpectd and unrrecoverable error has occurred because of a program error. Photoshop will now exit" when I try to launch it. Any ideas abou t what the problem is and how I can fix it?

Hi Thanks I will try it, I havent reloaded elements yet, I really need photoshop as I am a designer and use it alot for photos & need it right now, I have the CS5 Suite but it will not let me run it on this mac, it ask for intel processor and I have been unemployed for over 2years and cant affiord a new MAc right now , that is why I am so frustarated with the whole issue, it all started when I went to up grade to 10.5.8.
Patricia Bruhn
Graphic Designer
860-916-8371
Date: Fri, 13 Apr 2012 12:14:34 -0600
From: [email protected]
To: [email protected]
Subject: Upgraded Mac OS to 10.5.8, now Photoshop 7.0 won't open
    Re: Upgraded Mac OS to 10.5.8, now Photoshop 7.0 won't open
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Thank you PatriciaBruhn unfortunately the error is a bit generic. The best I can offer would be for you to try the steps listed in Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software - http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-f reezes-mac.html. These are generic troubleshooting steps and are great when the exact cause of the problem is unknown. I am not sure if the time and effort of going through the steps will be useful though as you may still run into difficulties. I might also suggest trying Photoshop Elements 10 - http://www.adobe.com/products/photoshop-elements.html or Photoshop CS5 - http://www.adobe.com/products/photoshop.html and seeing if either one of those fit your needs. Depending on what you use Photoshop 7 for you may find that Photoshop Elements can do the job plus have additional capabilities not even thought of during the time of Photoshop 7's development. Both Photoshop Elements 10 and Photoshop CS5 have a minimum system requirement of 10.5.8 so as long as your system meets the remaining requirements then they should work fine on your computer.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4333279#4333279
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4333279#4333279. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Compatibility issues with Mac OSX Leopard 10.5 and Word 2004 11.6.3 on G5 PowerMac?

Are there compatibility issues with Mac OSX Leopard V. 10.5 and Word 2004 11.6.3 when installed on a PowerMac G5? I understand the Leopard upgrade is okay on the later Intel Mac, but what about my G5 PowerPC Mac?

I do not use Microsoft Excel much but when i do use it it works fine on my G5. my powerbook has excel to but sometimes freezes on the powerbook. but not the G5 so give it a try you can always uninstall it if it does not work good
anitabean wrote:
Thanks so much for your positive reply! Are you a big user of Excel? That's where I've heard people have had trouble, with cells locking up and so on.
Crossing my fingers and loading Leopard....
Cheers.

Pls have been having issues upgrading to the os 10.9. downloads encounter error when it gets to 955mb and starts over again-.suggestions pls?

pls have been having issues upgrading to the os 10.9. downloads encounter error when it gets to 955mb and starts over again….suggestions pls?

http://www.apple.com/support/mac/app-store/contact/

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Are there any known issues upgrading to 10.8.3 from 10.7.5 with Parallels Desktop already installed in 10.7.5?

Welcome to Apple Support Communities
Most of the applications compatible with Lion are also compatible with Mountain Lion, so you shouldn't have any problem. Mountain Lion supports the latest update for Parallels 7 and 8, so if you haven't got one of these versions, you should upgrade it before upgrading Mac OS X. That application uses extensions, so it may cause kernel panics

I am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours. What should i do?

i am trying to upgrade Mac OSX from 10.7.4 10 .7.5 .But, the grey screen is coming for hours. I pressed the alt key and was taken to options viz. Restart to install MAC again, use time machine. I don't have back-up and so restarted to install MAC again. Can i cancel this now. I want my data to be secure. What should i do?

If you cancel an install there's no telling what state it will leave your Mac in. Let it finish or fail.
Then get a disk, it can even be a pocket drive if it's large enough and back up all your own data.
After that, boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X.

Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try

Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try to download Safari 4.0.3 or newer it says it requires an older version of the OS. What to do?

Update v10.5.5 to v10.5.8
Download and install the combo > Mac OS X 10.5.8 Combo Update
Then restart your Mac.
That should update Safari for you to 5.0.6 and that should help with iTunes.
If necessary, after updating to v10.5.8, you can use the standalone Safari installer here > Safari 5.0.6 for Leopard

HT1222 how to upgrade mac os 10.5.6 to os 10.5.8

Hi,
how to upgrade mac os 10.5.6 to os 10.5.8.
Best regards,
Jeane Ekel

Do you mean 10.5.8 or... 10.6.8...?
If 10.5.8...
Go Here > http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
and Download and Install the Combo update.
Be sure to Restart your computer after the successful install.

Upgrade mac os 10.5.6 without disk

How can I upgrade mac os 10.5.8 to 10.6 over the internet.

Blacky888 wrote:
How can I upgrade mac os 10.5.8 to 10.6 over the internet.
You cannot.
Snow Leopard = OS X 10.6.x... It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

Upgraded MAc pro to Lion now I no longer can open window office. any ideas?

upgraded Mac Pro to Lion, now no longer can use windows office. any ideas?

You need MS Office 2011 if you've installed Lion. Previous versions of Office don't work with Lion.

Upgrade Mac OS 3.9?

Is it possible to upgrade Mac OS 3.9 to a higher version on my iMac G5? I have checked for automatic updates by going into the apple icon drop down to "software updates..." but no Mac OS updates are suggested. Thanks in advance for your recommendations.

ETK719:
I'll research purchasing the 10.5 upgrade but I imagine that will be expensive. Do I purchase it through Apple or a third party?
As the previous poster indicated, you can purchase Leopard at Apple for $129. You may be able to purchase it for less at online sources such as Amazon. You will be purchasing the Full Retail Version, which would not include iLife 09 although it will include some earlier versions of applications like iPhoto and iTunes. If you purchase the boxed set it should include iLife 09. Check to be sure that it does.
What do you mean by losing "Classic Support" if I do the upgrade?
"Classic" refers to an emulator which runs OS 9 inside OS X. Some users have applications which need OS 9 or "Classic" to run. If you don't have any of those it will not be a concern for you.
Do you mean Apple will no longer provide technical support/help for my computer?
No. It means that the OS X 10.5x will no longer run those applications that need OS 9 or the Classic Environment. If you have AppleCare your hardware will still be supported by Apple, and Leopard will continue to be supported.
cornelius

HT5527 When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

Note that the method for paying to continue your complimentary storage isn't entirely intuitive:
If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

Issues upgrading Mac OS to 10.9.5?

Similar Messages

Maybe you are looking for