Issues uploading Podcast with Podbean

I have been using Podbean for almost four years and 197 episodes. I have never had an issue with an upload and they were almost automaticly posting into iTunes.
http://cruiseandblog.podbean.com/feed/
When I upload they instantly syndicate out to my app (cruise radio live), TuneIn Radio and Stitcher Radio. None of that has happened yet.
Podbean just upgraded their user dashboard and was wondering if anyone had any advice on what could be going wrong. A mass amount of my audience subscribes via iTunes.
When I email support they tell me that my feeds checks out okay.
Any advice?
Thanks in advance for any help. doug

The Store shows episodes 179 to 196. When subscribing, episodes 188 to 196 are showing, and this is also what's in the feed; so episodes 179 to 187 will disappear from the Store the next time it updates.
The feed contains a later episode, 197; however this does not have an 'enclosure' tag containing the URL of the media file, as required by iTunes (and present in your earlier episodes): iTunes does not display episodes with no playable media. Evidently there is something you need to do which you did on previous episodes but have failed to do here to make it an iTunes-compatible episode.
As to the missing earlier episodes, many podcast creation programs and services limit the number of episodes in the feed, moving older ones out of the feed and the main page and onto an archive page. It rather looks as if Podbean has reset itself to ten episodes (the number actually in the feed including 197); there is presumably a setting for this where you can increase the number.

Similar Messages

  • Issue uploading podcast

    I recently set up a podcast, hosting it on a bought domain through wordpress. I've gone through feedburner and set up my RSS feed (which when validated and tested, was successful)
    However, when I come to submit it onto iTunes I keep getting this error message:
    "We could not complete your iTunes Store request. An unknown error occurred (11111).
    There was an error in the iTunes Store. Please try again later."
    This has been happening for the last two days each time I submit it. Is anyone having similar issues?

    I am having the same problem trying to submit this feed:
    http://www.bleachernation.com/feed/podcast
    I keep getting a generic error like the one described in the opening post (but I do not get the 11111 part - no number at all). I tried the link you posted for submitting, but I get the same error there even before I have a chance to submit the feed. In other words, all I did was click on your link, iTunes tried to access the store for a little while, and then error.
    Is this an Apple problem? Any advice?

  • Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

    Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
    Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
    Thanks

    29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
    29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
    /Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
    (2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
    29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
    preflight for Macintosh HD
    29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
    (com.apple.quicklook[715]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.quicklook
    29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
    29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
    process of getting signing information: Error Domain=NSOSStatusErrorDomain
    Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The
    _DirtyJetsamMemoryLimit key is not available on this platform.
    29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
    (com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.pubsub.ipc
    29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
    (com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.pubsub.notification
    29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
    needing backup
    29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
    padding), 1.24 TB available
    29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
    from (NSApplication) to (ConsoleX): missing setter or instance variable
    29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
    updates were forcibly disabled by application "Console" for over 1.00
    seconds. Server has re-enabled them.
    29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
    updates were finally reenabled by application "Console" after 3.67 seconds
    (server forcibly re-enabled them after 1.00 seconds)
    29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
    mach_msg returned 10000004d
    29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:25:02.168 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.233 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.236 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.284 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The
    _DirtyJetsamMemoryLimit key is not available on this platform.
    29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    On 29 November 2014 at 19:29, Apple Support Communities Updates <

  • I'm experimenting some issues uploading barclays bank web page with safari

    I'm experimenting some issues uploading barclays bank web page with safari

    What issues are you having, and with which OS X & Safari version ?. Do provide a link to a page that causes problems.

  • My uploaded podcast cut off early

    I have a podcast that uploads automatially from podbean.com to itunes podcasts.  Each of my podcasts are being cut off on itunes about 15-30 seconds before the end.  What is causing this?  It is not only happening to me but to all who go to play the podcasts.  On my podbean.com site it doesn't cut off, just on itunes.

    Same thing has been happening for me. Certain songs, mostly purchased from iTunes, but a handful are ripped from CDs I owned are cutting out early - some halway thru the song. I have tried deleting from playlist, syncing, adding back to playlist, syncing, deleting song, redownloading from cloud, resyncing, etc. With inconsistent results. This is crazy! I don't have the time or patience to play Where's Waldo with all of my songs and go thru this ricidiculous routine.
    There are hundreds of complaints about this problem on this board - yet Apple is silent. C'mon Apple, fix this - I have a lot of money invested in music and it's no good if I can't hear the whole song.

  • Enhanced Video podcast with chapters..can we change the color of the text?

    Enhanced Video podcast with chapters..can we change the color of the text? Yo know when yo make a marker and then name it and put in the url name an then the url. Well it looks great on GB but when it is exported it is always blue and you cant see it very well. Am I a silly boy or is there some way we can change that color?
    http://www.galacticmac.com
    20" 2GHz Intel Core Duo   Mac OS X (10.4.10)  

    Hi there
    Sorry, but your post seemed to initially infer you were just referring to a Button you would insert on a page. At least that's what I understood when I posted with what I did.
    Now it would seem you are referring to the Playback Controls that Captivate supplies? So either I grossly misunderstood your initial issue or you are now switching gears and asking about something different.
    What I posted earlier does not apply to the Captivate Playback Controls.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Impossible Upload files with Filezilla FTP Client after upgrade win8 to win8.1

    Hi
    Things were working fine with win 8 but, after Upgrade to win 8.1 is not possible upload files with Filezilla  FTP Client.
    is there anyone facing same problem?
    thanks in advance for any answer to help me solve this issue 
    Regards 
    TC

    Hi,
    Please Change your transfer settings in site manager from either default or passive to active it to see what's going on.
    Also, check IE compatibility mode.
    In addition, I suggest you install all latest updates for Windows since these updates will improve and fix some known issues.
    Kate Li
    TechNet Community Support

  • Freezing issues in IE8 with scorm 1.2 captivate 6.1 export in moodle 2.5

    Hi
    I am working for a large commercial company where we have IE8 and a moodle 2.5, i am exporting multible scorm 2.1 packages from captivate 6.1, the issue i am having is that the scorm content loads fine, then it gets too a screen that says loading, it then just sits there, we have waited hours and it never loads, the scorm package is flash based no HTML5 as this does not work with IE8, we have tried lots of different settings i have even removed the swf from the scorm package after export, replaced with an image, and updated the IMS manifest, this worked with no problems when re-zipped and uploaded, which makes me think its the swf file.
    We have all the right flash plugins and can play a uploaded SWF with no issues, so i believe it is to do with the swf in the scorm package and how it calls on the appropriate plugins to run.
    my question really is has anybody found themselves in the same situation, i cannot update IE8 to a newer version as this is a site wide company policy.
    i have been through lots of threads that sound similar to the issue i have had but none had resolved.
    hopefully
    somebody can help me.
    Kind Regards
    Craig Sumner

    NNot tried it on scorm cloud but when it's ran on a machine from a different moodle instance and IE 10 works fine, we ran the scorm debug page on the machine as we access the scorm content on IE8 & everything loads psnd runs fine on the scorm

  • Problem uploading images with php script.

    As a webdebdesigner i developped a cms system to upload images with php to a mysql database. Firefox version 5.0.1 for MAC and earlier have no problems with uploading through the script. But after that version it is impossible to upload images bigger then 250kb. The page where the customer chooses his image for upload stalls and the form is not sent to the actual upload script, which should validate and process the image.
    This problem only occurs in Firefox, all other browsers work just fine!
    On top of that: Giving feedback to firefox not possible for MAC.

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web site development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • ITunes will not sync podcasts with iPod touch

    I've tried just about everything I know and consulted the internet, but I cannot get iTunes to sync my podcasts with my iPod Touch. It will sync my music, but it simply will not sync any of my podcasts. It must be something simple, but I've exhausted my knowledge on this issue. It worked fine on my desktop, but when I tried to move it over to my laptop, it just wouldn't work, no matter what I try. Call me an idiot or whatever you need to do if this is something stupid, but please, help me get my podcasts back!

    There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

  • Podcast with garageband

    I created a podcast with garageband, sent it to iweb to host on my site, submitted it to itunes from iweb. It was just approved today but when I looked at it there is a link back to my page where the podcast is hosted and I want it removed. How do I go about removing that link?

    I've not used iWeb for podcasting, but I ran a quick test and as I expected it fills in the 'link' tag in the feed (from which the iTunes Store page gets the site URL) with the URL of the podcast page. I can see no way of preventing it from doing this: you could edit the actual feed (you'd have to publish, download it, remove the URL, and upload it again) but you would have to do that every time you publish a new episode as obviously iWeb will overwrite the feed.
    The advantage of iWeb is that with no experience you can turn out quite effective sites and podcasts: but the disadvantage is that you get very little scope for customization.

  • Uploading problem with Ebay and Dreamweaver MX

    I am unable to sync websites with Dreamweaver MX 6.01. When I connect to the remote server, it shuts down the program. I have reinstalled the program, but it still does it. Also, when I use Safari, Opera, and Firefox to upload photos on Ebay, the upload process fails completely, and blows me directly into My Ebay, as if I was not on the selling page at all. I have to go to my PC to do the photo uploads. Seems like it may be a related issue, some kind of uploading problem with Rosetta, or something. I am using a Macbook Pro with the 2.0Ghz processor, connected with ethernet cable, and firewall is set to off. Any ideas?

    For E-Bay you might try the following:
    Type the following command in Terminal (while Safari is NOT running):
    defaults write com.apple.Safari IncludeDebugMenu 1
    Then launch Safari, and you will be able to use the new Debug menu.
    If you ever wish to disable it again, just repeat the command with a "0" instead of a "1".
    Under the Debug menu, you'll see the User Agent sub-menu; select Windows MSIE 6.0 from the list and then try connecting to your web site
    Dreamweaver you might need to update your version.
    To Dreamweaver 8.01
    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=f56452a8

  • Wordpress http error while uploading images with flash

    Hi guys
    I have a problem with my wordpress blog " bollywood wallpapers ". When I try to upload images with defualt wordpress flash uploader I get "http" error.
    I am having this problem from last 5 months.

    Dear Siva,
    that is indeed strange.
    Still don't know if this could be an issue with your NWDS or the PAR itself.
    So let's do 2 tests
    ===============================================
    TEST NR. 1
    Let's try and check the NWDS first by creating a custom PAR.
    Don't worry, it's easy.
    Just open your NWDS and go to the top menu
    File > New > Project
    Inside the popup window that will open please choose
    Portal Application (on the left) and Create a Portal Application Project (on the right)
    Then give any name you would like (no spaces or dots, etc...)
    You now have a Portal project created on NWDS ( you will see a folder on the left side with your project name)
    Click on that folder with your LEFT mouse button and choose EXPORT
    Choose PAR File
    Choose your Project
    Choose a path where you want your PAR file to be saved. (uncheck the deploy PAR file, but check the include the source code).
    And click Finish.
    Now delete the project you have created (by clicking on the folder with your LEFT mouse button again, but chose DELETE project)
    Now you're ready to re-import the PAR file.
    ===============================================
    TEST NR. 2
    Maybe your standard PAR file that you've downloaded doesn't have the source code included or is corrupted.
    Please try to open it with a ZIP program and check what type of structure/files you have there.
    Have you also checked your NWDS log ?
    You could also share here that log, so that I can better help you.
    Kindest Regards
    /Ricardo

  • Enhanced podcast with scanned images

    I'm working with a music teacher to help her create an enhanced podcast of a short children's book. She wants kids to be able to view the podcast on an iPod Touch. She has scanned in each page of the book, brought them into GarageBand and added voice. When she exports for either iPod or iPhone, the text of the story is unreadable and fuzzy when viewed on the iPod.
    The photos themselves are perfect when viewed in iPhoto, no problems reading the text.
    Can anyone give advice on where the problem might be? Would it be with the scanner and the size/resolution of the scanned pages? Or is there some setting or process within GarageBand to redo?
    Thanks for your help!

    If the text is fine in iPhoto then the problem is not with the scanner.
    The issue will be with the compression used when creating the 'podcast' or movie.
    What settings does she use to export / share from Garageband? Did she try exporting it as a full quality movie first and then converting it in iTunes?

  • SPA941 issues when used with Road Runner Extreme (Time Warner) 30mb/s down, 5 mb/s up.

    I use a SPA941 phone in my home office.
    Until recently, my Internet bandwidth was through Time Warner Road Runner Turbo.  It generally worked well, but when I happened to be sending a large email or uploading a large file while on the phone, my voice would break up due to the upload bandwidth limitation. 
    Because of this, I upgraded to Road Runner Extreme (30mb/s download, 5mb/s upload). Now, although speedtest.net tests show that I have good bandwidth and latency, the mute button flashes red at various times througout the day, and at seemingly random times when I'm on the phone, the other party's voice will start to break up and/or cease completely, as though I have a download bandwidth problem... but a quick speedtest.net check shows that not to be the case.
    I've spent hours (literally) on the phone with Time Warner 3rd level tech support, and they say everything is fine... and the issue must be with the phone.
    I'm using a Ubee DOCSIS 3.0 WLCM combination modem/router
    Connected to the SPA941 via cat5 10/100 Ethernet.
    Has anyone encountered this problem?
    Does anyone have any suggestions?
    Are there any settings on the phone that can be adjusted to help in this situation?
    Thanks,
    David

    Hi David,
    After reviewing your post I see one important piece of information
    "the mute button flashes red at various times througout the day"
    Mute button flashing means the ethernet link went down.  That would be between the phone and the device the ethernet cable is connected to.  The SPA941 is 10mb half duplex device (no pc connection so it didn't need higher capacity).
    It could be an auto negotiation issue with the network device.  Try forcing the link to 10mb half duplex or daisy chain a 3rd party switch/hub and see if the problem goes away.
    One more possibility is IP address DHCP lease renews itself causing the link to go down and up.  You can also try setting static IP address with dns & gateway, etc..  into the SPA941.
    Randy

Maybe you are looking for