Issues using Apple TV

Hi,
Just set up my new apple TV, although it plays music from my iphone 4 v4.2.1 it won't show my photos?? from the iphone i select show on Apple TV but nothing comes up on the TV!
Also, I'm trying to play music from itunes 10.2 on my PC but it gives me an "unknown error (-15000)".. any ideas? I've enabled home sharing and entered the password for apple tv but no luck!
help!
thanks

I have a similar problem in that after a few hours of no use the home share appears on all 4 of my Apple TVs but it cannot connect. I need to restart iTunes on the home share machine and then it is good for a while. Not sure this happened when I installed iTunes 10.6 but it happened in the last week.

Similar Messages

Issues using Apple Pay at Tim Hortons

I Work at Tim Hortons and have tried to use apple pay multiple times, using different cards and none have worked. A few co-workers have tried and had the same result. When you hit "credit" on the register it activates the card terminal that does have tap to pay-which does work with my debit card. However, when you try to use Apple pay it either gets declined or says " card reafter error"
goolge wallet used to work but now does the same thing?

I do not see Tim Horton's in the list of vendors accepting Apple Pay --- yet.
http://www.apple.com/apple-pay/where-to-use-apple-pay/

Using Apple TV bought in the U.S. in England

Any issues using Apple TV bought in the U.S. in England ?

I once plugged 240Volts UK power into a US 110V Xbox development kit.
It went bang!
But if your Apple TV is the same as my UK model. It says (on the grey rubber base) 110-240V
So no problems with power.
There should be no problems with the video output either. Analog TVs had NTSC and PAL - but HDMI is a digital standard. So your Apple TV should work fine.
In the UK we don't have Movie Rentals yet. Or movies of any kind - but that's because we have UK iTunes accounts. A US account should still work.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

HT5927 Using apple configurator with supervised devises, enabling iCloud/ find my iOS device (after being supervised), backing up that supervised / find my iPhone enabled image, --issue; unable to apply back up to any iOS device (including the orign. devi

Senario:
Need to manage 500 Enterprise iPads
Requirements;
1) Trackable via Find my iOS device (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
Issue: Can not do any following senarios;
A)
1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.

Hi all
I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
Any help would be greatly appreciated!

Issues using macbook with bootcamp and external apple monitor

I am having issues using an apple external monitor connected to my macbook with bootcamp - in particular, if i connect the monitor to the computer when the computer is already on, it won't work. Also, when i disconnect the monitor fromt he computer, the computer screen will go black and I'll have to re-start
Anybody experienced the same and can help?
Thx

just make sure that while its standing on its side there aren't any plugs or cables on that side. I'm not familiar with the mb port setup, but having power, two usb, and a display cable could prose a problem for sideward standing if they are on separate sides of the machine.
as the first commenter mentioned the orientation of your computer is irrelevant, but you wouldn't want to have the weight of the laptop sitting ontop of a usb or video plug that's coming out the side.

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing. Now album covers are interspersed with my pictures. I have been using apple tv for a while and never had this happen before

Are you watching this content though iCloud or though from iTunes on your local computer? If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens? This is geerally a much more reliable way to view the content. Easer to fast forward and rewind too.
- I have a stable internet connection
Clearlly you don't
>(Ive tested on other devices)
Which does not tell you anything about the specific connnection from ATV to iCloud.
>I am able to stream Netflix problem free from my AppleTV without so much as a hicup
Again which does not tell you anything about the specific connnection from ATV to iCloud.
>- I am able to download the episodes to my phone, ipad, and computer without any issues
Again which does not tell you anything about the specific connnection from ATV to iCloud. It does remove your ISP throattly traffice as a possible cause though. So that is good.
Have you checked your wireless rounter? Tried doing the factory restor on it? Upgrading it's firmware? Is it and or ATV getting extreamly hot when this problme happens?

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick
THE use of the apple support is a mess also.
I want to be able to use my MAC fully and easily like I used to with Snow Leopard.
What is wrong with this maverick OS?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Compatibility issues using CS5 on Apple Mavericks?

Are there compatibility issues using CS5 on Apple Mavericks?

XP is not supported using Boot Camp and Mavericks. http://support.apple.com/kb/HT5634.
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Dixcussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?

Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Wireless Network issue while using Apple Hardware Test remotely

I want to use Apple Hardware Test remotely through the disc on my MacBook Pro to check on a MacBook Air (old model). The problem is that when I start up the Air with the option key checked it does not recognise my wireless network and if I input it manually in the drop down list it will not connect. Other networks from neighbours are strangely enough visible. When I startup through the HD it instantly finds my Apple Airport network. What could be the issue?
Thanks

Hi,
Hmm.... I'm not sure I get what you mean or not but hardware test is a "in house" application for MBA and you don't need the installation disk to run the application. Unlike MBPro, you need the disk to run hardware test.
http://support.apple.com/kb/HT2644
cheers.

Creative Cloud Issue After Using Apple's Migration Assistant

I bought a new Mac and used Apple's Migration assistant to transfer everything from the old Mac to the new. Everything works with all apps except Creative Cloud. Creative Cloud states that some files are missing and prompts me to download and install Creative Cloud again. I do that and run the App. The app runs for a minute, acts like it's installing than I get the same error -- Creative Cloud is missing some files or some files are corrupt, please download and reinstall -- it brings me to the webpage to download it again. I'm stuck in this infinite loop!
The old Mac where Creative Cloud runs fine is a 15" Retina Display MacBook Pro. The new Mac is a 27" iMac.
Any help is greatly appreciated!

Uninstall, run the cleaner, and install fresh
-Sign out fix http://forums.adobe.com/thread/1408331?tstart=0
-On a new drive http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Can I use apple TV on home network with time capsule or Airport Xtreme without being connected to the internet?

I'm wondering if I can use Apple TV to play movies and slide shows on my TV, play music over my sound system and print from my devices (Iphone 4S, iPad and MacBook pro 2011) by using an Airport Xtreme or Time Capsule (to back up the devices) if those devices are not connected to the internet. Can anyone advise pls? Reason for this is that I work on a moving ship and don't have an internet connection to speak of for much of the time (and if I do it's a wireless system that I need to pay by the minute and that is too slow to support the Apple TV), but would all the same like to create a wireless environment where my devices can interact with each other. I seem to get conficting info and a rep at the apple store in Honolulu told me that you cannot use Airport Xtreme or Time Capsule without an internet connection (it was busy, he may have misunderstood my question).
Looking forward to your input.

Don't try to home share it.. as that is dependent on using Apple ID.
Just airplay to the ATV.. iTunes: Using AirPlay
The movie should play exactly as your doing music.. but get rid of the whole home share if that is causing issues.. there is no mention of needing home share in the above..
If you still have issues you might need to do it other ways.. like export the movie from itunes.. and play it using vlc which should allow you to stream it to the apple TV using airplay.
That is a bit tricky and I have not used that setup but it should work.
http://apple.stackexchange.com/questions/23412/can-i-stream-any-video-played-wit h-vlc-player-to-apple-tv
If you have a hunt around you should find it fairly easy to do.. but straight airplay should work.. there is a very recent update to ATV which might help it with airplay.

Re indexing issues in Apple Loop Browser (LP 9.0.2 / OSX 10.6.1 / Digi 002r

I'm trying to re index my loop browser in LP9 / OSX10.6.1
Are you having the same problem?
After trashing the 'Apple Loop Index', I pull in a folder from an external drive and notice that previous folders added to my browser have gone, including Jam Packs.
Also, I can't find the 're-index' option within the loop browser search option (right click brings down a list but the re-index option isn't there)
Interested to see whet you find.

Yep, I also had issues, where indexing the LP8 way (dragging folders with loops from the Finder onto the Logic loop browser) just bluffed to work (I dropped the folder on the LB, a progress window appeared, things apparently got done, but then nothing, no new entries in the Loop Browser.
So it seems that it is a L9 problem, since our Macs' are different in every aspect (Me: PPC- you: Intel, me: Leopard- you: Snow Leopard).
I finally decided to put all my loops in their default install locations and reindex them from there:
*Library/Audio/Apple Loops/Apple:*
Jam Pack 4 - Symphony Orchestra
Jam Pack Voices
Jam Pack World Music
*Library/Audio/Apple Loops/iLife Sound Effects:*
(13 folders)
*Library/Audio/Apple Loops/User Loops:*
(some folders with my own and 3rd party Loops)
*Library/Application Support/Garageband/Apple Loops:*
Apple Loops for Garageband
Jam Pack 3- Rythm Section
for thorough reindexing, here are the steps:
1. Quit Logic and/or any other app that uses Apple Loops.
2. Go to all the locations I pointed out and trash all the index files from the *Apple Loops Index* folders. Also check the same locations in your Users/'you'/Library folder.
3. Start Logic with a new empty project, open the loop browser window by hitting the o key. Now drag the folders mentioned above in bold onto your loop browser. Logic should now index them correctly, including the foldermenu !http://farm3.static.flickr.com/2743/4085966954bf4fc039d7o.png! in the loop browser.
regards, Erik.

Problem using Apple TV with TP-Link Wifi Extender

Hi,
I have been having problems connecting my Macbook Pro to my Apple TV via airplay and I believe it is due to the new wifi extender that I have installed in my home. Basically, the wifi extender uses the powerlines in the walls to extend the connection from my office at one end of the house, to my living room at the other. I am sitting here with my Macbook Pro in front of the TV using Apple TV, both connected to the same wifi SSID but still no option to mirror or extend my desktop onto the Apple TV. Can anyone help? Please? This is also affecting my Homesharing. It's as if the wifi extender is actually technically a second wifi network and my devices are getting confused and not finding each other.
Joe

I have the same Activity set up for my Harmony One. (First, I believe you mean "Devices," not "Components.") You appear to have some of your buttons customized wrong for the Apple TV Activity, since you said other Activities work fine, like Watch TV, etc. Within the Harmony software, go to the Activities (NOT Devices) tab, choose Watch Apple TV (or whatever you have named this activity), and then choose Customize Buttons. Then click the Standard Buttons tab, and then go down the whole list (of dropdown menus) to assign, re-assign, or confirm that all the proper Commands are assigned to all the proper Devices. For example, to correct your volume control issue, choose your Receiver to control the volume up and down Commands, etc. If this is done correctly, you won't have to go to Devices (for the receiver) any more on your remote to control the volume. It will all be controlled within the remote's Activity function, as you've requested. It has to work, since your other Activites are finding your receiver properly. If not, then Logitech's Harmony support has been helpful to me in the past, assuming you're still in warranty, etc. I hope this helps. Good luck!

Issues using Apple TV

Similar Messages

Maybe you are looking for