Issues w/ iChat AV and WPN824 Router

Hello there Ralph Johns......
Ok, so here's the deal. I recently bought the WPN824 v2 and while I was able to set up all the computers(1 Powerbook G4, 1 iBook G4 and the other computers in the house are hardwired.
The main issue I'm having is not being able to log on to iChat AV. Now I know you can change the port from 5190 to 80 or 443 to chat, but it won't alllow me to Audio Chat.
I've read about port forwarding and port triggering but I feel as though I'm leaving something out. My firewall is off in my G4 so that leaves me with the router.
After I open up the ports, I log out of my router setup and try to log on to iChat but it keep saying "Lost Connection to AIM".
Everything was working fine with my previous netgear router WGT624. Would you be able to shed some light on my issue.
Not only am I experiencing the same issue, but my sis is as well. She just bought an Intel iMac and the WPN 824 Router and no luck with logging on.
One more thing and I know you'll help me out in steps, but would I have to set up a Static IP(we have DHCP) since there are 2 macs that use iChat?
Ok, I know I bombarded you with a lot, but I appreciate any help you can offer me.
I'm at work now but could have screenshots tonight if need be.
Thank you!!!
Powerbook G4 Mac OS X (10.4.6) 1.67GHz, 1.5 GB DDR Ram, Lacie 300GB Firewire 800, 23" HD Display
Powerbook G4 Mac OS X (10.4.6)

Hi,
Something like the Netgear DG834 series, or Linksys WRT54G (Not the GS or GX)
No Pre-N devices either. These are the ones trying to guess what the next 802.11 format will be. It will be 802.11N as opposed to the B and G currently in use. But that is as fr as they have got with deciding.
Something that offers UPnP (even if it is a Netgear that needs it started twice to work)
Realistically a Wireless device can send data through at 54Mbps. It is not likely to reach this and 20Mbps is more likely. However this is certainly faster than most internet connections.
4:43 PM Monday; June 12, 2006

Similar Messages

Having issues with PC gaming and my Linksys AC1900 router! (What settings should I be using?)

Well I recently purchased a linksys AC1900 for a better/faster connection with my internet. Sadly, I have been having issues with online gaming. I am attempting to play a blizzard game (Diablo 3) but its not letting my connect. I did a direct wired connection and it worked just perfect. However, I dont want to play in my garage...lol. Does anyone have any ideas what settings I should be using? It lets me connect to battlenet but when my character loads into the world I get disconnected. I tried opening ports, shutting off uPnP, and various other things. Is the the router or is it me? Someone please help!

I got confused with your response. If you are still having the same challenge, make sure you have enough speed to play any online game. You may also try to reboot your PC and the router. If the result is the same, check if the firmware is up to date. You may try to manually update it on the Linksys Smart WiFi page. Here's how. Once accomplished, reset, reboot, and reconfigure the router. I hope this helps!

Having issues with IP Phones and the RV042 Router

Hello,
We have recently purchased Ring Central IP Phones and are having audio issues. We have a RV042 router with two WAN connections. We called Ring Central Tech support and were told that IP Phones will not work with the RV042 while loading balancing is enabled. Has anyone ever successfully setup IP Phones with a RV042 router while having loading balancing enabled? I configured the port range that the IP Phone use to be bound to WAN 1 but still having problems. Thanks in advance.
Loren

I Have the 5s but my screen keeps freezing up and I have to force restart on my apps!

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

Serious dial-up issues with iChat and Mail

I've got three Macs on a network: G4 Mac Mini, G4 PowerBook, and a MacBook Pro all upgraded to Leopard. I live in a rural setting and am stuck with dial-up for the moment. My usual set-up with Tiger was to connect the Mini via dial-up via the Juno service. This is set to share the connection via Ethernet to Airport Express. Typically there is only one user at a time accessing either the MacBook Pro or the g4 Powerbook via the wireless share. In Tiger this worked perfectly. iChatting, web, and email all worked flawlessly. Every now and then a large download in Mail or Safari might time out but only large downloads 4mb or larger and rarely.
Since upgrading to Leopard none of the Macs can send an email with lots of content... say somewhere around 70 kb or more. Inline text or an attachment, does not matter... it will time out. This happens whether directly connected via the phone or via the wireless share to the Mini. iChat is also nearly useless with time out errors between each bubble of text sent as well as frequent disconnects. Adium also has problems with basic text chat. I've tried connecting the PowerBook via Juno directly to bypass possible problems with the Mini and it is experiencing the exact same problems when connected. Web browsing is perfectly fine as are ftp transfers. The problem seems to be limited to AIM (regardless of client) and email.
Thoughts?

I seem to have solved my various internet related problems and the source problem is the software provided by my dial-up isp, JUNO. The solution was to connect directly via OS X network preferences using PPP. In the past I've always used the JUNO software to connect. Earlier today it occurred to me that I have never even tired to bypass the JUNO software. Since logging on via Leopard's built in PPP I've not had any iChat errors and am also now able to send larger emails via smtp. So, perhaps in my case the culprit was an incompatibility between Leopard and the JUNO software.

Time Capsule and Linksys Router Issues

The internet cable is connected to the WAN port and the Time Capsule is connected is to one of the ports of the Linksys router. I can successfully backup my MacPro and use the internet for Mail and Safari.
I want to take advantage of the high speed ethernet performance of Time Capsule. However, I don't know if the Time Capsule is really faster than my Linksys router. Where do I get this information? I suspect the Time Capsule is much faster because I just purchased the Time Capsule. The router is at least 5 years old.
In spite my concern about the speeds of the Time Capsule and Linksys router, I tried to attach the Time capsule as recommended by Apple for a "first time set up." It failed. The Time Capsule using the AirPort Utility cannot make a network connection. I reestablished the devices as given in paragraph one. WiFi runs again.

Ethernet speed on your local network is determined by the slowest connected device which most likely will be the LinkSys router or your computer.

Having trouble connecting to AIM on iChat, adium and AIM

hi guys,
as the title states, i am having a **** of a time connecting to ichat through my wireless connection!
i recently moved and have a new ISP provider (qwest). i have contacted them regarding port forwarding/firewall settings and they assured me that there is no problem with their modem. i tested this out by connecting my macbook directly to the modem, and i was able to connect to ichat.
next, i adjusted settings on the motorola wireless router (model wr850g), turned off the firewall, port forwarding, UPnP! this didn't help at all. i contacted motorola and they assured me that it was not their product that was causing my connection problems and it was the settings on my mac.
now, i have been able to connect to ichat when using a linksys router right out the gate, so all the firewall settings that i adjusted in the system preferences was new to me. so i followed all the directions there about sharing and firewall and performed all necessary steps, and i am still having problems.
i am able to browse the internet, but things like azureus, ichat, adium, and aim are not working.
before i contact apple regarding this issue, i wanted to see if there was anybody with the same type of problem. i have searched the forums the past 2 days and could not find anything regarding this problem. please help.
the model of the qwest router is
actiontec gt-701
motorola wr850g
thank you
macbook Mac OS X (10.4.10)

Hi mrayatpa,
Both these devices have variation model numbers on this Page
http://portforward.com/routers.htm
It would be best if one was not doing DHCP.
Preferably the modem should have DHCP turned off then the router should be set to ask to use a Static IP to the Modem.
This will stop the computer being in two DHCP subnets that overlap and is probably the cause of the problem.
As iChat uses ports above 1024 that need to be opened or allowed this needs sorting.
Web Browsing and mail apps use ports below the 1024 mark and are not routers as such hence the reason the work no matter what the set up is (or how many subnets are involved)
8:08 PM Saturday; July 7, 2007

IChat opens and closes repeatedly

I've seen this come up in discussions a few times but without answers.
iChat opens and closes repeated then tells me I've logged in too many times and to try again later. BUT... this only happens on one particular Airport connection. Everywhere else is fine. Is it the wireless router that is the problem... some compatibility issue? Is that the issue for the other people getting this problem too, perhaps?
Any ideas how to fix this?

Hi,
From that (9C7010) I can see that you have done the Time Machine and Airport Update.
I presume this updates the specs for the Airport Card as well as adjusting the Airport Devices themselves to Apple's version of the latest 802.11n draft spec.
I would have then said that it was effecting the connection presumably as this is now out of step with the firmware on the Netgear, but you say other Internet features work.
First I would delete the com.apple.iChat.AIM.plist from Users/(your account)/Library/Preferences
Then I would see if this Netgear is set to Respond to Internet Pings and has the Block Port Scan and DOS (or SPI) turned Off.
As test I would see if the N spec can be turned off in the Netgear and use the G only.
4:39 PM Sunday; April 6, 2008

Site-to-Site VPN between Cisco ASA 5505 (8.4) and Cisco Router (IOS 15.2)

Hi, I'm trying to create Site-to-Site VPN between Cisco ASA 5505 and Cisco Router 3945.
I've tried create configuration with and without ASA wizard, but anyway it doesn't work.
Please help me to find where is the issue.
I have two sites and would like to get access from 192.168.83.0 to 192.168.17.0
192.168.17.0 --- S1.S1.S1.S1 (IOS Router) ==================== S2.S2.S2.S2 (ASA 5505) --- 192.168.83.0
Here is my current configuration.
Thanks for your help.
IOS Configuration
version 15.2
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
crypto isakmp key cisco address 198.0.183.225
crypto isakmp invalid-spi-recovery
crypto ipsec transform-set AES-SET esp-aes esp-sha-hmac
mode transport
crypto map static-map 1 ipsec-isakmp
set peer S2.S2.S2.S2
set transform-set AES-SET
set pfs group2
match address 100
interface GigabitEthernet0/0
ip address S1.S1.S1.S1 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto map static-map
interface GigabitEthernet0/1
ip address 192.168.17.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
access-list 100 permit ip 192.168.17.0 0.0.0.255 192.168.83.0 0.0.0.255
ASA Configuration
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.83.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address S2.S2.S2.S2 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network inside-network
subnet 192.168.83.0 255.255.255.0
object network datacenter
host S1.S1.S1.S1
object network datacenter-network
subnet 192.168.17.0 255.255.255.0
object network NETWORK_OBJ_192.168.83.0_24
subnet 192.168.83.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
access-list outside_cryptomap extended permit ip 192.168.83.0 255.255.255.0 object datacenter-network
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn_pool 192.168.83.200-192.168.83.254 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic inside-network interface
nat (inside,outside) source static inside-network inside-network destination static inside-network inside-network no-proxy-arp route-lookup
nat (inside,outside) source static inside-network inside-network destination static datacenter-network datacenter-network no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.83.0_24 NETWORK_OBJ_192.168.83.0_24 destination static datacenter-network pdatacenter-network no-proxy-arp route-lookup
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 DEFAULT_GATEWAY 1
crypto ipsec ikev1 transform-set vpn-transform-set esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set vpn-transform-set mode transport
crypto ipsec ikev1 transform-set L2L_SET esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set L2L_SET mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set vpn-transform-set
crypto map vpn 1 match address outside_cryptomap
crypto map vpn 1 set pfs
crypto map vpn 1 set peer S1.S1.S1.S1
crypto map vpn 1 set ikev1 transform-set L2L_SET
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy GroupPolicy_S1.S1.S1.S1 internal
group-policy GroupPolicy_S1.S1.S1.S1 attributes
vpn-tunnel-protocol ikev1
group-policy remote_vpn_policy internal
group-policy remote_vpn_policy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec
username artem password 8xs7XK3To4s5WfTvtKAutA== nt-encrypted
username admin password rqiFSVJFung3fvFZ encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool vpn_pool
default-group-policy remote_vpn_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group S1.S1.S1.S1 type ipsec-l2l
tunnel-group S1.S1.S1.S1 general-attributes
default-group-policy GroupPolicy_S1.S1.S1.S1
tunnel-group S1.S1.S1.S1 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f55f10c19a0848edd2466d08744556eb
: end

Thanks for helping me again. I really appreciate.
I don't hve any NAT-exemptions in Cisco IOS Router. Transform-set I will change soon, but I've tried with tunnel mode and it didn't work.
Maybe NAT-exemptions is the issue. Can you advice me which exemptions should be in Cisco IOS Router?
Because on Cisco ASA I guess I have everything.
Here is show crypto session detail
router(config)#do show crypto session detail
Crypto session current status
Code: C - IKE Configuration mode, D - Dead Peer Detection
K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
X - IKE Extended Authentication, F - IKE Fragmentation
Interface: GigabitEthernet0/0
Session status: DOWN
Peer: 198.0.183.225 port 500 fvrf: (none) ivrf: (none)
      Desc: (none)
      Phase1_id: (none)
IPSEC FLOW: permit ip 192.168.17.0/255.255.255.0 192.168.83.0/255.255.255.0
        Active SAs: 0, origin: crypto map
        Inbound: #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
        Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
Should I see something in crypto isakmp sa?
pp-border#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id status
IPv6 Crypto ISAKMP SA
Thanks again for your help.

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

When my 4S connects to my home wifi, it kicks all other devices off and the router has to be restarted. Can anyone help?

I am using an iPhone 4S with 16gb memory. I did not yet update to iOS 8. I'm using 7.1.2. I have never had any problems previously using 3G or wifi. We just moved and have a new Netgear router supplied by our new ISP. We have ADSL connection. The router seems to be working fine for all the devices in the house. At any time we may have 2 or 3 laptops connected, as well as Kindle Fires, iPod Touches, and my husband's iPhone (which is the same make, model, year as mine). My iPhone will connect, but usually within minutes after connecting my iPhone 4S (though sometimes 30 minutes or more later), it kicks everyone offline and the router needs to be restarted. The router shows appropriate green lights and I can see it on my list of available networks, but if I try to connect I get the "unable to connect to this network" message until we restart the router. No one else is able to reconnect until the restart, either.
I have tried resetting network settings on my iPhone. I have completely turned off my iPhone and the router. I have talked with someone at our ISP and they did a reset of the router with me. They think the router is bad. But it works completely fine for everyone else in the house, so I can't help but think we are having a connection issue between the router and my iPhone.
Any help you can offer would be greatly appreciated! Thank you!

Is her iPhone in a case by any chance? If so, remove the case and try again. How does her iPhone work in free Wi-Fi locations?
Try resetting the iPhone...
Press and hold the Home and On/Off buttons simultaneously until you see the Apple logo, then release. This may take up to 10 seconds. This is the equivalent of a re-boot and you will not lose any data.
If none of the above work take it to an Apple store or AASP for evaluation. She will not be charged folr this and they will suggest a solution if there is a fault.

Adding VLAN to Po-Group and OSPF routing what is the correct way?

Hi Community,
I recently had an issue that brought down the links between a couple of switches...luckily this was done after hours and I did not save the config so was able to revert back.
The basic scope of my project is:
We are running out of IP's on the 192.168.1.0/24 sunbnet so wanted to create a seperate VLAN/Subnet for physical workstations.
He is what I orginally did;
1) On our core switch; (Switch1)
     Create the VLAN,
     VLAN interface,
     DHCP pool,
     excluded address'
2) On second switch (Switch 2)
     Add VLAN name, no interface
3) I then updated the PO-group on Switch1 with new VLAN (this brought down the link before I was able to finish my config)
    Therefore I was not able to complete the following:
          add vlan to spanning-tree or updated OSPF routing
Here is what I assume to be the correct order?
1) On Core Switch (Switch 1)
     Create VLAN
     VLAN interface
     DHCP pool
     excluded address'
     add vlan to spanning-tree
     add vlan (passive interface) and sunbet to OSPF routing
2) On Switch 2
     Add vlan name/interfaces with no ip
3) Update PO groups after the above has been configured
     Add new VLAN to Po-Group on Switch 2
     Add new VLAN to Po-Group on Switch 1
4) Last steps
     Updated specific access ports with new VLAN and test
     upon completion of testing, update all other access ports connected ot workstations with new VLAN
Questions:
Did my links go down because I added new VLAN to Po-group BEFORE updating spanning-tree and OSPF routing?
Can anyone verify the order as outlined in the section "Here is what I assume to be the correct order"

So the order in which to apply TASKS is correct?
also just to clarify the following TASK based on your comments.
Step 4- Add new VLANs to OSPF as passive interface
On Switch 1 (core)
We have this line of code
router ospf 100
router-id 192.168.1.10
log-adjacency-changes
passive-interface Vlan10
passive-interface Vlan30
passive-interface Vlan50
passive-interface Vlan500
network 192.168.0.2 0.0.0.0 area 0
network 192.168.1.10 0.0.0.0 area 0
network 192.168.30.254 0.0.0.0 area 0
network 192.168.33.254 0.0.0.0 area 0
network 192.168.51.254 0.0.0.0 area 0
network 192.168.99.5 0.0.0.0 area 0
network 192.168.200.254 0.0.0.0 area 0
TASK: OSPF - Add new VLANs(40 & 41) to OSPF as Passive Interface
******* Begin Here *********
config t
router ospf 100
passive-interface vlan40
passive-interface vlan41
!WE SHOULD ADD THIS LINE OF CODE
network 192.168.40.254 0.0.0.0 area 0
network 192.168.41.254 0.0.0.0 area 0
******* End Here *********
RESULT:
router ospf 100
router-id 192.168.1.10
log-adjacency-changes
passive-interface Vlan10
passive-interface Vlan30
passive-interface Vlan40
passive-interface Vlan41
passive-interface Vlan50
passive-interface Vlan500
network 192.168.0.2 0.0.0.0 area 0
network 192.168.1.10 0.0.0.0 area 0
network 192.168.30.254 0.0.0.0 area 0
network 192.168.33.254 0.0.0.0 area 0
network 192.168.40.254 0.0.0.0 area 0
network 192.168.41.254 0.0.0.0 area 0
network 192.168.51.254 0.0.0.0 area 0
network 192.168.99.5 0.0.0.0 area 0
network 192.168.200.254 0.0.0.0 area 0
Better??
Again thanks...your feedback have been a tremendous help!

Outlook 2010 and 2013 are unable to connect but OWA (and mail routing) works fine

Hi-
Not sure why but this past Sunday (just after DST adjustment) outlook clients (using 2010 and 2013) were unable to connect to an Exchange 2013 server. OWA and mail routing (internal and external) is working fine. I've even tried on multiple machines
and all of them experience the same issue. On a new machine with a fresh version of outlook 2013 installed here is what happens:
Click on Outlook 2013
Click Next until the account setup is displayed.
Name and email is auto-populated
Established network connection is good
Searching for email address settings is good (once the self-signed exchange 2013 cert is accepted)
And then the logging onto the mail server fails. The first pop-up is:
The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
Clicking "OK" is followed up with a window with the Microsoft Exchange connection info.
It lists Microsoft Exchange server which is populated with: GUID@<domain suffix>
Mailbox which is populated with: =SMTP:<Valid Email address>
On the Exchange Server I have noticed that the Web Management Service (WMSVC) is stopped and will not start. Starting the service outputs:
EventID 7024
"The Web Management Service terminated with the following service-specific error: Unspecified error"
Not really helpful :)
Since this is only happening with Outlook on multiple clients I'm expecting something with Exchange or the ability for outlook to connect to exchange.
Thanks in advance!

Hi
I know this is an old post, but I'm having a very similar issue. I have CU6 installed and all other client connectivity apart from internal Outlook connectivity is working fine. I have distributed the new Self-Signed Certificate and the tested to verify
the clients trust it. I have tried on multiple machine with multiple accounts and none of them connect.
I'm at the stage of reinstalling, but I would rather troubleshoot the problem, just in case ever hit the same wall in the future. I have run Test-OutlookConnectivity with the following output;
RunspaceId : 71f8d740-c499-4bbe-8baf-9cbb12566fb8
Server : PW-SC-01.companyname.local
MonitorIdentity : Outlook.Protocol\OutlookRpcDeepTestProbe\NEW2013
RequestId : 75641e34-aa49-4fce-aad7-181b56dd7b29
ExecutionStartTime : 10/11/2014 13:50:03
ExecutionEndTime : 10/11/2014 13:50:03
Error : Error 0x6ba (The RPC server is unavailable) from ClientAsyncCallState.CheckCompletion:
RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
Exception : Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC server is unavailable)
from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
at Microsoft.Exchange.Rpc.ClientAsyncCallState.CheckCompletion()
at Microsoft.Exchange.Rpc.ExchangeClient.ClientAsyncCallState_Connect.End(IntPtr&
contextHandle, TimeSpan& pollsMax, Int32& retryCount, TimeSpan& retryDelay, String& dn
PoisonedCount : 0
ExecutionId : 63105129
SampleValue : 33.5194
ExecutionContext : Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 10/11/2014 13:50:03
- TaskFinished = 10/11/2014 13:50:03
- Exception = Microsoft.Exchange.Rpc.ServerUnavailableException: Error 0x6ba (The RPC
server is unavailable) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 2
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1710
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: 0 (0x00000000)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 13
EEInfo: Status: 0x000006BA
EEInfo: Detection location: 1352
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 1
EEInfo: prm[0]: Long val: -1073606646 (0xC002100A)
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0xC002100A
EEInfo: Detection location: 1380
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 12175 (0x00002F8F)
EEInfo: prm[1]: Unicode string: /rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
EEInfo: ComputerName: n/a
EEInfo: ProcessID: 14544
EEInfo: Generation Time: 2014-11-10 13:50:03.737
EEInfo: Generating component: 14
EEInfo: Status: 0x00010000
EEInfo: Detection location: 1385
EEInfo: Flags: 0
EEInfo: NumberOfParameters: 2
EEInfo: prm[0]: Long val: 8 (0x00000008)
EEInfo: prm[1]: Binary Buffer: [48-1263-10248-1262-126-9632122164676121-3988104-118-11373-61-94
-111-112-98-1217048136942-12272-122-91311550483449324830638543192311910198979999101115115461121199
91111091091154699111461171074830231349524949485349505348484990231349574949485349505348484990483449
324830638543192311910198979999101115115461121199911110910911546991114611710748-12613448136942-1227
2-122-913111503-126115048-1261102-126110-22103-15-109-16-121-119-3121-4-106119-119-9369122-5779121
719-98-24-67-32918-98-236-19-10715326827-76102-61100108-12718-438331-37109-102-57-9942-11389-10374
-77-5-4-107109-11847342222-63-48-7468-17-1067033-56111-33-54-16-105-62-76-1282011-1664-12158-4915-
88-53-9-29-2994-49-54-5211-1364-212121-12396-127-353-396185117-681229-434246070-109818119-4858-128
-106-1279248-49110-44-81-121494199-118-17-106-71106828294-93-110-110-106-415084-127126-45-12331421
-61-2757-24-128-28-25111-52113121-56-98-5821527282-47255245104-111-55-1099747-115-11172-287-12526-
79-12430-119421360-107-6430-5410282-52-51-128533354-116672757-77-75-111-72-118-10114-84484825-40-1
8-70-24-9111-61-5391-8034125-12632-16-19-128112030-8-427523101-93-127-5348-127-5648146385291511-14
4325-9648-127-110638529174-127-11848-127-121-12623119101989799991011151154611211999111109109115469
911146117107-1262211211945115994548494611211999111109109115461081119997108-12626651171161116810511
59911111810111446808767111109109115461081119997108-12626651171161116810511599111118101114468087671
11109109115469911146117107-12613808767111109109115461081119997108-12613808767111109109115469911146
11710748196385293741248106843615573148126385291911-14248048136942-12272-122-913115503-12611081-930
6613-74953718-12745-14-25-94107-80-5-45-2231536-1728-12897-8587577-1252765-892896-83-10267-7926-20
-9841-1079-12-29-4315671111357-684036-40-5129-91-24-461066-12306-65-9118-89115191071-30-20-1067161
-83-91-74105-931649-48-96126-13-71-118-8967567-40-64-104-113-31-51-102357125100-50113-103-113123-9
873-627067-25-908-10131118125122-71-115-37-1850-1055851-31410-77-7312-36848124-26104-10711043-2048
-48-12666611759121127-2960-1571-9-95-98-1036911610-74221-32-25114-108749933-7147562114-3635-101-81
-1058-73108-61-78-128-116-715155112714-37-18-84-8331-2716-1174257-76-5-1598-15-12875-98-7329632178
-10714-123-6312212-1028359-56-76-683-873987-2120-845954-7617-71-57999828110], size=926
at Microsoft.Exchange.Rpc.ClientAsy
FailureContext :
ExtensionXml :
ResultType : Failed
RetryCount : 0
ResultName : 75641e34aa494fceaad7181b56dd7b29-OutlookRpcDeepTestProbe/NEW2013
IsNotified : False
ResultId : 1748063
ServiceName : InvokeNow
StateAttribute1 : Momt
StateAttribute2 : UnknownIssue
StateAttribute3 : PW-SC-01.companyname.local
StateAttribute4 : Unknown
StateAttribute5 : {C54AD38D-1E00-4F53-ABAE-26518C3FF82F}
StateAttribute6 : 0
StateAttribute7 : 0
StateAttribute8 : 0
StateAttribute9 : 0
StateAttribute10 : 0
StateAttribute11 : Momt
StateAttribute12 :
StateAttribute13 : VgEAVAdXaW5kb3dzQwBBCEtlcmJlcm9zTA9QV0NPTU1TXG5hdGhhbmhVLlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC
0xNTQ2MTE0ODM1LTI2MzJHHQAAAAcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTEzBwAA
AAdTLTEtMS0wBwAAAAdTLTEtNS0yBwAAAAhTLTEtNS0xMQcAAAAIUy0xLTUtMTUHAADAE1MtMS01LTUtMC0zNDc3ODcxMTMHAA
AALlMtMS01LTIxLTIwNTc0OTEwMzItMzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTQxODcHAAAALVMtMS01LTIxLTIwNTc0OTEwMzIt
MzE4NDA2NDk3OC0xNTQ2MTE0ODM1LTUxMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtND
E3NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMzU3MAcAAAAuUy0xLTUtMjEtMjA1NzQ5
MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDEyMgcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMT
Q4MzUtMTE2NAcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtMTE0MQcAAAAuUy0xLTUtMjEt
MjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNDE1MwcAAAAuUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LT
E1NDYxMTQ4MzUtNDE0NQcAAAAtUy0xLTUtMjEtMjA1NzQ5MTAzMi0zMTg0MDY0OTc4LTE1NDYxMTQ4MzUtNTE4BwAAAC5TLTEt
NS0yMS0yMDU3NDkxMDMyLTMxODQwNjQ5NzgtMTU0NjEx
StateAttribute14 :
StateAttribute15 :
StateAttribute16 : 0
StateAttribute17 : 0
StateAttribute18 : 0
StateAttribute19 : 0
StateAttribute20 : 0
StateAttribute21 : /o=companyname/ou=first administrative group/cn=Recipients/cn=NathanH
StateAttribute22 : EMSMDB.Connect()
StateAttribute23 : https://pw-sc-01.companyname.local:444/rpc/rpcproxy.dll?PW-SC-01.companyname.local:6001
StateAttribute24 : Negotiate
StateAttribute25 : [33]10/11/2014 13:50:03 [FAILED!] EMSMDB.Connect();
Identity : fcd6159dd8fe42aebf10100cc4934356
IsValid : True
ObjectState : New

Issues w/ iChat AV and WPN824 Router

Similar Messages

Maybe you are looking for