Issues w/Reader XI
I started having problems after updating Reader to version 11.0.09. When I try to open Adobe Reader XI from my desktop or a .pdf that already exists in my computer I get this message: Adobe Reader has stopped working Windows is checking for a solution to the problem and nothing happens. When I attempt to open a link to a .pdf file (any .pdf link on any site) I get this message: There is a problem with Adobe Acrobat/Reader If it is running, please exit and try again. (0:104). I have been unable to get a satisfactory resolution to this from Adobe. Please help I am a student online. The Reader is necessary for my classes. I have Windows 7 and IE 11.Thank you.
tabnotbrat wrote:
I can get Reader to open period.
Can? Or cannot? If not, download, unzip, then run this registry script to disable Protected Mode https://files.acrobat.com/a/preview/8452a535-f8c6-4cf4-8b6f-53aecc92c6b9
Similar Messages
-
Issue in reading a binary file, with 'Flatten to String' data.
I'm facing issue while reading a binary file (created using LabVIEW).
I've mentioned everything (issue and method to reproduce it) within the attached VI.
Same vi is attached in 2012 and 8.0 versions.
Regards
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Solved!
Go to Solution.
Attachments:
Issue in VI.vi 26 KB
Issue in VI (Version 8.0).vi 43 KBmoderator1983 wrote:
crossrulz wrote:
The reading of a string from a binary file stops at a NULL character (0x00). When the first character is 0x00, you are just reading the one character. I would suggest writing to a byte array since you are doing the inverting. And then you can read as a byte array.
crossrulz:
U rocks..!!
you have hit bull's eye...!!
After playing around a little more, I think I might have misinformed you a little. If you explicitly tell it a string, it looks for the string length at the very beginning and reads that length of bytes as a string. It appears that if you implicitly tell it to read a string (not wire the data type) it reads all of the bytes directly, including the length of string you wrote.
Regardless, my advice is the same. You should just write and read using byte array. It is less conversions if you are performing your "encryption".
EDIT: Here's a snippet of the VI I was playing with to figure this out.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
String Binary File.png 12 KB -
Facing issue while reading XML file 'LPX-00217: '
Hi Gurus,
I am facing one issue while reading the xml file in the one my 11g database instance. The same file if I ran in another instance then it is working fine for me.
I presume it will be related to NLS character. Please help me in finding out character set.
And the issue where I am getting instance character set is 'US7ASCII', and I am not getting this issue in another instance where the character set is 'UTF8'.
And here is the issue I am getting when I was trying to load that file.
Error Occurred :=ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML
processing
LPX-00217: invalid character 150 (U+0096)
Error at line 1
Pls help me in debugging this issue.
Regards,
Nagendra
Edited by: 838961 on Jul 12, 2011 9:32 PMHi,
Pls help me in debugging this issue.There's not much to debug actually.
The US7ASCII charset stores 7-bit characters, but you're trying to insert a value out of range (150). So that's expected behaviour.
There were some "tricks" to allow that on some versions, using NLS settings, but it's definitely not the clean way to do it so I won't develop.
The best thing you have to do is to migrate to character set AL32UTF8, which is fully compliant with XML. -
Javascrip issue in Reader 7.0.7
Hello,
We have PDF form designed using Designer 7.0
It has a button which when clicked invokes java script "xfa.host.gotoURL("some url").
When the user opens the file in the Reader 7.0.7, and click on the button, for some users the link works and for some other it doesn't work. What might be the problem with this script. Whyit works for some and why not for some others
Is there an issue with Reader 7.0.7 with respect to this call in the script.
Please let us know.
Thank you
SamHi Gaurav,
Check if this thread helps you:
Re: Application Enhancement Tool
Regards,
Saumya -
Calendar issues and read receipts
Hi all,
About 6 months ago we upgraded Exchange from 2003 to 2007 and from 2007 to 2013.
Server setup is Win2k12r2 with Exchange 2013 SP1.
Clients are all Win8.1 with Office 2013 up-to-date.
We have experience some issues from the start. But we are unable to resolve them.
Issue 1:
When Outlook is operating in cached mode and shared folders are downloaded too calendars shared between users are not up-to-date. This means: when a users adds an appointment to the shared calendar, it sometimes takes a lot of time before other users can
see this. We solved this issue by disabling the download of shared folders. This way all users work online in shared calendars.
Issues 2:
When using the above mentioned combination of a cached mailbox with online shared folders we are unable to use the context menu (right mouse button) on an appointment to set the category that is located in a shared calendar. The solution is to disable cached
mode in outlook, which means outlook is Online. Then the issue is resolved. But we would like to have outlook in cached mode.
Issue 3:
When outlook is in online mode the Read receipt function breaks down. When a user requests a read receipt (internally or externally) and presses the send button a message stating that the mail was deleted without reading is immediatly received. Putting outlook
in cached mode solves this issue. But it seems broken anyway but it might be a setting?
Any and all help is appreciated.Regarding Issue 1, multiple users working off the same calendar risks race conditions, where one person's updates overwrite another's, and that problem is severely aggravated with the use of cached mode. Please read the following two articles for more
information about your issues in more generality.
http://www.networkworld.com/community/blog/exchange-outlook-calendaring-problems-lost-me
http://www.networkworld.com/community/ExchangeCalendaringProblemSolutions
Regarding Issue 2, see my answer to above to understand why cached mode is bad for calendars unless they're used as read-only.
Regarding Issue 3, read receipts are unreliable. If they work at all, consider it a little blessing. Besides, they don't really prove the recipient read the mail, just that he opened it. Read receipts are easily bypassed, so I recommend
you stop worrying about them.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Time Stamp Offset Issue when Reading TDMS
I am having an issue when reading a TDMS file and displaying it on a waveform chart in LabVIEW. My waveform chart will always display the time stamp with a negative offset of 18,000 samples.
To make that easy, let's say I am sampling at 1000 samples per second and I log my data to TDMS. When I read that TDMS and display my waveform chart data, the chart displays the data read from the TDMS 18 seconds earlier than the recorded wf_start_time stated within the TDMS. If my wf_start_time is 08:00:20.000 AM 12/02/2014, then my waveform chart displays a start time of 08:00:02.000 AM 12/02/2014. Likewise if I sample at 4000 samples per second, my start time is off by starting 4.5 seconds earlier.
I am setting my Xscale.offset = wf_start_time and it reads back correctly, but the start time on the waveform chart is still wrong.
Because I am dealing with larger TDMS files (500mb+), I sometimes decimate the data to view it due to memory issues. Here, this issue occurs again. If I decimate the data to only display 1 out of every 10 data points, that offset is further shifting by a factor of 10x; going from 18 seconds to 180 seconds.
Is this some kind of UTC/system clock time stamp discrepancy or something else?
Solved!
Go to Solution.
Attachments:
VI edit tdms.png 41 KBIt's okay to mark your own post as a solution if it really is the solution, as it is in your case. That way, people that have the same problem know it was solved and they can see what you did to solve it.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
Hi Gurus,
I am dier need of one of the xml issue which I am facing right now.
I am reading one of the xml file which is like this
<?xml version="1.0" encoding="UTF-8" ?>
- <GEBIZ_ORDER xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <HEADER>
<MINISTRY_CODE>RPO</MINISTRY_CODE>
<DEPARTMENT_CODE>000</DEPARTMENT_CODE>
<ORDER_CODE>RPO000EPO11000953</ORDER_CODE>
<EXTERNAL_SYSTEM_CODE>E</EXTERNAL_SYSTEM_CODE>
<AMENDMENT_NUMBER>0</AMENDMENT_NUMBER>
<VARIATION_NUMBER>0</VARIATION_NUMBER>
<DESCRIPTION>Purchase Order for Air tickets for SOT to Korea (from 17th - 26th Sep 2011) off PC(RPO000ECN11000100)for SAS</DESCRIPTION>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<PAYMENT_TERMS xsi:nil="true" />
<BILL_TO>One-Stop Centre, 9 Woodlands Avenue 9, S(738964)</BILL_TO>
<JUSTIFICATION>Please refer to attached approval email.</JUSTIFICATION>
<CREATE_TIMESTAMP>2011-07-08T16:57:39</CREATE_TIMESTAMP>
<TERMINATE_REASON xsi:nil="true" />
<TERMINATE_TIMESTAMP xsi:nil="true" />
<ORDER_TYPE>1</ORDER_TYPE>
- <FINANCIAL_SYSTEM>
<SUB_BUSINESS_UNIT>RPS01</SUB_BUSINESS_UNIT>
</FINANCIAL_SYSTEM>
- <SUPPLIER>
<CODE>200003048E</CODE>
<NAME>Safe2Travel Pte Ltd</NAME>
<GST_NUMBER>20-0003048-E</GST_NUMBER>
<CONTACT_NAME>ONG PEI LENG</CONTACT_NAME>
<CONTACT_PHONE>68233103</CONTACT_PHONE>
<CONTACT_EMAIL>[email protected]</CONTACT_EMAIL>
<CONTACT_FAX>68221636</CONTACT_FAX>
- <SITES>
- <SITE>
<ID>1</ID>
<NAME>ravel Pte Ltd</NAME>
<PHONE>68233013</PHONE>
<PHONE_EXTENSION xsi:nil="true" />
<FAX>68221636</FAX>
<EMAIL>[email protected]</EMAIL>
<ADDRESS_LINE1>10 Eunos Road 8</ADDRESS_LINE1>
<ADDRESS_LINE2>#08-03 (North Lobby)</ADDRESS_LINE2>
<ADDRESS_LINE3>Singapore Post Centre</ADDRESS_LINE3>
<COUNTRY_CODE>SG</COUNTRY_CODE>
<PROVINCE xsi:nil="true" />
<STATE xsi:nil="true" />
<CITY xsi:nil="true" />
<AREA_CODE xsi:nil="true" />
<ZIP>408600</ZIP>
<REGION_CODE xsi:nil="true" />
</SITE>
- <SITE>
<ID>2</ID>
<NAME>ravel Pte Ltd</NAME>
<PHONE>62208866</PHONE>
<PHONE_EXTENSION xsi:nil="true" />
<FAX>62265578</FAX>
<EMAIL>[email protected]</EMAIL>
<ADDRESS_LINE1>3 Lim Teck Kim Road</ADDRESS_LINE1>
<ADDRESS_LINE2>#02-02</ADDRESS_LINE2>
<ADDRESS_LINE3>Singapore Technologies Building</ADDRESS_LINE3>
<COUNTRY_CODE>SG</COUNTRY_CODE>
<PROVINCE xsi:nil="true" />
<STATE xsi:nil="true" />
<CITY xsi:nil="true" />
<AREA_CODE xsi:nil="true" />
<ZIP>088934</ZIP>
<REGION_CODE xsi:nil="true" />
</SITE>
- <SITE>
<ID>3</ID>
<NAME>Safe2Travel Pte Ltd</NAME>
<PHONE>62208866</PHONE>
<PHONE_EXTENSION xsi:nil="true" />
<FAX>62265578</FAX>
<EMAIL>[email protected]</EMAIL>
<ADDRESS_LINE1>3 Lim Teck Kim Road</ADDRESS_LINE1>
<ADDRESS_LINE2>#02-02</ADDRESS_LINE2>
<ADDRESS_LINE3>Singapore Technologies Building</ADDRESS_LINE3>
<COUNTRY_CODE>SG</COUNTRY_CODE>
<PROVINCE xsi:nil="true" />
<STATE xsi:nil="true" />
<CITY xsi:nil="true" />
<AREA_CODE xsi:nil="true" />
<ZIP>088934</ZIP>
<REGION_CODE xsi:nil="true" />
</SITE>
</SITES>
</SUPPLIER>
- <USER>
<CODE>JOYCE SOON</CODE>
<NAME>JOYCE SOON</NAME>
<ORGANISATION_NAME>Republic Polytechnic</ORGANISATION_NAME>
</USER>
- <FUND_COMMIT_AMOUNT>
<CURRENCY_CODE>SGD</CURRENCY_CODE>
<CURRENCY_RATE>1</CURRENCY_RATE>
<CURRENCY_RATE_DATE>1900-01-01T00:00:00</CURRENCY_RATE_DATE>
<CURRENCY_RATE_TYPE>BOOK</CURRENCY_RATE_TYPE>
<CURRENCY_AMOUNT>21551.4</CURRENCY_AMOUNT>
</FUND_COMMIT_AMOUNT>
- <PERIOD_CONTRACT>
<CODE>RPO000ECN11000100</CODE>
<AGENCY_CODE>RPO000</AGENCY_CODE>
<ADMIN_FEE_SGD_AMOUNT>0</ADMIN_FEE_SGD_AMOUNT>
</PERIOD_CONTRACT>
- <BUYER>
<ORGANISATION_CODE>1</ORGANISATION_CODE>
<ORGANISATION_NAME>Republic Polytechnic</ORGANISATION_NAME>
<NAME>Sally Ang</NAME>
<PHONE>31001711</PHONE>
<FAX>64151310</FAX>
<EMAIL>[email protected]</EMAIL>
</BUYER>
<APPROVING_OFFICERS />
</HEADER>
- <ITEMS>
- <ITEM>
<LINE_NUMBER>1</LINE_NUMBER>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<DESCRIPTION>Return Air Ticket including Airport Taxes and Fuel Surcharges (2 staff and 24 students)</DESCRIPTION>
<UNIT_OF_MEASURE>PAX</UNIT_OF_MEASURE>
<QUANTITY>26</QUANTITY>
<LINE_TYPE>SERVICES</LINE_TYPE>
<UNIT_PRICE>828.9</UNIT_PRICE>
<PRICE_UNIT>1</PRICE_UNIT>
<TOTAL_AMOUNT>21551.4</TOTAL_AMOUNT>
<MATERIAL_MASTER_CODE xsi:nil="true" />
<MATERIAL_GROUP_CODE xsi:nil="true" />
<PLANT_CODE xsi:nil="true" />
<ITEM_CATEGORY_CODE xsi:nil="true" />
<ADMIN_FEE_SGD_AMOUNT>0</ADMIN_FEE_SGD_AMOUNT>
<INSTRUCTION_TO_SUPPLIER>Purchase of goods/services is subject to the Terms & Conditions found in www.rp.sg/purchase and/or in the ITQ/ITT Specifications. Please liaise with the Contact Person for delivery details. Invoice MUST be addressed to the Contact Person. PO number MUST be included in the Description field under e-Invoice Details section at Vendor@Gov.</INSTRUCTION_TO_SUPPLIER>
<PERIOD_CONTRACT_LINE_NUMBER>1</PERIOD_CONTRACT_LINE_NUMBER>
<GOODS_INSPECT_FLAG>N</GOODS_INSPECT_FLAG>
- <PURCHASE_REQUEST>
<CODE>RPO000EPR11000465</CODE>
<LINE_NUMBER>1</LINE_NUMBER>
</PURCHASE_REQUEST>
- <PART_NUMBER_INFORMATION>
<NATO_STOCK_NUMBER xsi:nil="true" />
<MANUFACTURER_PART_NUMBER xsi:nil="true" />
<PART_NUMBER xsi:nil="true" />
<CAGE_CODE xsi:nil="true" />
<CAGE_NAME xsi:nil="true" />
<ITEM_CONDITION xsi:nil="true" />
<MINIMUM_SHELF_LIFE xsi:nil="true" />
<SHELF_LIFE_REMAINING xsi:nil="true" />
<CERTIFICATE_OF_CONFORMANCE xsi:nil="true" />
<EXPORT_LICENSE xsi:nil="true" />
</PART_NUMBER_INFORMATION>
- <LOCATIONS>
- <LOCATION>
<LINE_NUMBER>1</LINE_NUMBER>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<QUANTITY>26</QUANTITY>
<DELIVERY_DESTINATION>Republic Polytechnic, One-Stop Centre, 9 Woodlands Avenue 9, S(738964)</DELIVERY_DESTINATION>
<DELIVERY_DATE>2011-07-11T00:00:00</DELIVERY_DATE>
<DELIVERY_TERMS>LOC</DELIVERY_TERMS>
<PORT_OF_ORIGIN>-</PORT_OF_ORIGIN>
- <RECIPIENT>
<CODE>OSC</CODE>
<NAME>One Stop Centre</NAME>
<PHONE>65103000</PHONE>
<EMAIL>[email protected]</EMAIL>
</RECIPIENT>
- <DISTRIBUTIONS>
- <DISTRIBUTION>
<LINE_NUMBER>1</LINE_NUMBER>
<STATUS>NEW</STATUS>
<STATUS_DATE>2011-07-08T16:57:39</STATUS_DATE>
<QUANTITY>26</QUANTITY>
<CHART_OF_ACCOUNT>1/G01/3SAS/020/220908/0000/0000/0000</CHART_OF_ACCOUNT>
<PROJECT_DISTRIBUTION xsi:nil="true" />
</DISTRIBUTION>
</DISTRIBUTIONS>
</LOCATION>
</LOCATIONS>
</ITEM>
</ITEMS>
</GEBIZ_ORDER>I was able to read this kind of file structure but due to some constraints now they added supplier sites and increment that one which will be like variable kind of thing now.
And below mentioned is the script which I am using right now for reading that xml file
PROCEDURE XGBZPROD.XGBZ_PUR_ORD_XMLTAG_PROC(P_XML_FILE IN VARCHAR2, P_FOLDER_NAME IN VARCHAR2)
IS
lv_supp_file XMLTYPE;
lv_hdr_error VARCHAR2(240);
lv_line_error VARCHAR2(240);
lv_line_loc_err VARCHAR2(240);
lv_dist_err VARCHAR2(240);
l_file_name VARCHAR2(300);
l_folder_name VARCHAR2(300);
lv_sysdate DATE := sysdate;
BEGIN
l_file_name := p_xml_file;
l_folder_name := p_folder_name;
-- this clause to check whether is xml file or NODATA FILE.
IF upper(substr(l_file_name,instr(l_file_name,'.',1)+1,3)) ='XML' THEN
lv_supp_file := xmltype( bfilename('XMLDIR',P_XML_FILE), nls_charset_id('AL32UTF8'));
dbms_output.put_line('P_XML_FILE '||P_XML_FILE);
-- Initially insert data into 11g table
-- This is to read xml datafile
INSERT INTO XGBZ_PO_XML_DETAILS
(ministry_code ,
department_code ,
order_code ,
external_system_code ,
amendment_number ,
variation_number ,
description ,
status ,
status_date ,
payment_terms ,
bill_to ,
justification ,
create_timestamp ,
terminate_reason ,
terminate_timestamp ,
order_type ,
sub_business_unit ,
cost_center_group ,
buyer_code ,
financial_system_order_code ,
user_nric ,
supplier_code ,
supplier_name ,
gst_number ,
contact_name ,
contact_phone ,
contact_email ,
contact_fax ,
supp_site_id ,
supp_site_name ,
supp_site_phone ,
supp_sit_phone_ext ,
supp_site_fax ,
supp_site_email ,
supp_site_add_line1 ,
supp_site_add_line2 ,
supp_site_add_line3 ,
supp_site_country_code ,
supp_site_province ,
supp_site_state ,
supp_site_city ,
supp_site_area_code ,
supp_site_zip ,
supp_site_region_code ,
user_code ,
user_name ,
user_org_name ,
currency_code ,
currency_rate ,
currency_rate_date ,
currency_rate_type ,
currency_amount ,
tx_field_2 ,
agency_code ,
admin_fee_sgd ,
buyer_orgn_code ,
buyer_orgn_name ,
buyer_name ,
buyer_phone ,
buyer_fax ,
buyer_email ,
ao_code ,
ao_name ,
line_no ,
line_status ,
line_status_date ,
line_description ,
unit_of_measure ,
line_qty ,
line_type ,
unit_price ,
line_total_amount ,
material_master_code ,
material_group_code ,
item_category_code ,
line_admin_fee_sgd_amt ,
instruction_supplier ,
period_contract_line_no ,
goods_inspect_flag ,
pr_code ,
pr_line_number ,
nato_stock_number ,
manufacturer_part_no ,
part_number ,
cage_code ,
cage_name ,
item_condition ,
minimum_shelf_life ,
shelf_life_remaining ,
cert_of_conformance ,
export_license ,
line_location_no ,
line_loc_status ,
line_loc_status_date ,
line_loc_qty ,
delivery_destination ,
delivery_date ,
delivery_terms ,
port_of_origin ,
recipient_code ,
recipient_name ,
recipient_phone ,
recipient_email ,
dist_line_no ,
dist_line_status ,
dist_line_status_date ,
dist_line_qty ,
chart_of_account ,
project_distribution
SELECT --Header Data
ministry_code ,
department_code ,
order_code ,
external_system_code ,
amendment_number ,
variation_number ,
description ,
status ,
status_date ,
payment_terms ,
bill_to ,
justification ,
create_timestamp ,
terminate_reason ,
terminate_timestamp ,
order_type ,
sub_business_unit ,
cost_center_group ,
buyer_code ,
financial_system_order_code ,
user_nric ,
supplier_code ,
supplier_name ,
gst_number ,
contact_name ,
contact_phone ,
contact_email ,
contact_fax ,
supp_site_id ,
supp_site_name ,
supp_site_phone ,
supp_sit_phone_ext ,
supp_site_fax ,
supp_site_email ,
supp_site_add_line1 ,
supp_site_add_line2 ,
supp_site_add_line3 ,
supp_site_country_code ,
supp_site_province ,
supp_site_state ,
supp_site_city ,
supp_site_area_code ,
supp_site_zip ,
supp_site_region_code ,
user_code ,
user_name ,
user_org_name ,
currency_code ,
currency_rate ,
currency_rate_date ,
currency_rate_type ,
currency_amount ,
tx_field_2 ,
agency_code ,
admin_fee_sgd ,
buyer_orgn_code ,
buyer_orgn_name ,
buyer_name ,
buyer_phone ,
buyer_fax ,
buyer_email ,
ao_code ,
ao_name ,
line_no ,
line_status ,
line_status_date ,
line_description ,
unit_of_measure ,
line_qty ,
line_type ,
unit_price ,
line_total_amount ,
material_master_code ,
material_group_code ,
item_category_code ,
line_admin_fee_sgd_amt ,
instruction_supplier ,
period_contract_line_no ,
goods_inspect_flag ,
pr_code ,
pr_line_number ,
nato_stock_number ,
manufacturer_part_no ,
part_number ,
cage_code ,
cage_name ,
item_condition ,
minimum_shelf_life ,
shelf_life_remaining ,
cert_of_conformance ,
export_license ,
line_location_no ,
line_loc_status ,
line_loc_status_date ,
line_loc_qty ,
delivery_destination ,
delivery_date ,
delivery_terms ,
port_of_origin ,
recipient_code ,
recipient_name ,
recipient_phone ,
recipient_email ,
dist_line_no ,
dist_line_status ,
dist_line_status_date ,
dist_line_qty ,
chart_of_account ,
project_distribution
FROM XMLTable('/GEBIZ_ORDER'
passing lv_supp_file
columns
ministry_code VARCHAR2(3) path 'HEADER/MINISTRY_CODE',
department_code VARCHAR2(3) path 'HEADER/DEPARTMENT_CODE',
order_code VARCHAR2(17 ) path 'HEADER/ORDER_CODE',
external_system_code VARCHAR2(1) path 'HEADER/EXTERNAL_SYSTEM_CODE',
amendment_number VARCHAR2(5) path 'HEADER/AMENDMENT_NUMBER' ,
variation_number VARCHAR2(5) path 'HEADER/VARIATION_NUMBER',
description VARCHAR2(500) path 'HEADER/DESCRIPTION',
status VARCHAR2(500) path 'HEADER/STATUS',
status_date VARCHAR2(24) path 'HEADER/STATUS_DATE',
payment_terms VARCHAR2(400) path 'HEADER/PAYMENT_TERMS',
bill_to VARCHAR2(200) path 'HEADER/BILL_TO',
justification VARCHAR2(400) path 'HEADER/JUSTIFICATION',
create_timestamp VARCHAR2(24) path 'HEADER/CREATE_TIMESTAMP',
terminate_reason VARCHAR2(400) path 'HEADER/TERMINATE_REASON',
terminate_timestamp VARCHAR2(24) path 'HEADER/TERMINATE_TIMESTAMP',
order_type VARCHAR2(2 ) path 'HEADER/ORDER_TYPE',
sub_business_unit VARCHAR2(5 ) path 'HEADER/FINANCIAL_SYSTEM/SUB_BUSINESS_UNIT',
cost_center_group VARCHAR2(20 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/COST_CENTER_GROUP',
buyer_code VARCHAR2(30 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/BUYER_CODE',
financial_system_order_code VARCHAR2(20 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/FINANCIAL_SYSTEM_ORDER_CODE',
user_nric VARCHAR2(9 ) path 'HEADER/FINANCIAL_SYSTEM/NFS/USER_NRIC',
supplier_code VARCHAR2(10) path 'HEADER/SUPPLIER/CODE',
supplier_name VARCHAR2(140) path 'HEADER/SUPPLIER/NAME' ,
gst_number VARCHAR2(30 ) path 'HEADER/SUPPLIER/GST_NUMBER',
contact_name VARCHAR2(140 ) path 'HEADER/SUPPLIER/CONTACT_NAME',
contact_phone VARCHAR2(23 ) path 'HEADER/SUPPLIER/CONTACT_PHONE',
contact_email VARCHAR2(100) path 'HEADER/SUPPLIER/CONTACT_EMAIL',
contact_fax VARCHAR2(23 ) path 'HEADER/SUPPLIER/CONTACT_FAX',
supp_site_id NUMBER path 'HEADER/SUPPLIER/SITES/SITE/ID',
supp_site_name VARCHAR2(140) path 'HEADER/SUPPLIER/SITES/SITE/NAME',
supp_site_phone VARCHAR2(23) path 'HEADER/SUPPLIER/SITES/SITE/PHONE',
supp_sit_phone_ext VARCHAR2(4 ) path 'HEADER/SUPPLIER/SITES/SITE/PHONE_EXTENSION',
supp_site_fax VARCHAR2(23 ) path 'HEADER/SUPPLIER/SITES/SITE/FAX',
supp_site_email VARCHAR2(100 ) path 'HEADER/SUPPLIER/SITES/SITE/EMAIL',
supp_site_add_line1 VARCHAR2(254 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE1',
supp_site_add_line2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE2',
supp_site_add_line3 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE3',
supp_site_country_code VARCHAR2(2 ) path 'HEADER/SUPPLIER/SITES/SITE/COUNTRY_CODE',
supp_site_province VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/PROVINCE',
supp_site_state VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/STATE',
supp_site_city VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/CITY',
supp_site_area_code VARCHAR2(10 ) path 'HEADER/SUPPLIER/SITES/SITE/AREA_CODE',
supp_site_zip VARCHAR2(20 ) path 'HEADER/SUPPLIER/SITES/SITE/ZIP',
supp_site_region_code VARCHAR2(3 ) path 'HEADER/SUPPLIER/SITES/SITE/REGION_CODE',
user_code VARCHAR2(16 ) path 'HEADER/USER/CODE',
user_name VARCHAR2(25 ) path 'HEADER/USER/NAME',
user_org_name VARCHAR2(95 ) path 'HEADER/USER/ORGANISATION_NAME',
currency_code VARCHAR2(3 ) path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_CODE',
currency_rate NUMBER path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_RATE',
currency_rate_date VARCHAR2(24) path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_RATE_DATE',
currency_rate_type VARCHAR2(5 ) path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_RATE_TYPE',
currency_amount NUMBER path 'HEADER/FUND_COMMIT_AMOUNT/CURRENCY_AMOUNT',
tx_field_2 VARCHAR2(17 ) path 'HEADER/PERIOD_CONTRACT/CODE',
agency_code VARCHAR2(6 ) path 'HEADER/PERIOD_CONTRACT/AGENCY_CODE',
admin_fee_sgd NUMBER path 'HEADER/PERIOD_CONTRACT/ADMIN_FEE_SGD_AMOUNT' ,
buyer_orgn_code VARCHAR2(5 ) path 'HEADER/BUYER/ORGANISATION_CODE',
buyer_orgn_name VARCHAR2(95 ) path 'HEADER/BUYER/ORGANISATION_NAME',
buyer_name VARCHAR2(80 ) path 'HEADER/BUYER/NAME',
buyer_phone VARCHAR2(23 ) path 'HEADER/BUYER/PHONE',
buyer_fax VARCHAR2(23 ) path 'HEADER/BUYER/FAX',
buyer_email VARCHAR2(100 ) path 'HEADER/BUYER/EMAIL',
ao_code VARCHAR2(16 ) path 'HEADER/APPROVING_OFFICERS/APPROVING_OFFICER/CODE',
ao_name VARCHAR2(40 ) path 'HEADER/APPROVING_OFFICERS/APPROVING_OFFICER/NAME',
items XMLTYPE path 'ITEMS'
) x1,
XMLTABLE('/ITEMS/ITEM'
passing x1.items
columns
line_no VARCHAR2(5) path 'LINE_NUMBER',
line_status VARCHAR2(15) path 'STATUS',
line_status_date VARCHAR2(24) path 'STATUS_DATE',
line_description VARCHAR2(500) path 'DESCRIPTION',
unit_of_measure VARCHAR2(3) path 'UNIT_OF_MEASURE',
line_qty NUMBER path 'QUANTITY',
line_type VARCHAR2(20) path 'LINE_TYPE',
unit_price NUMBER path 'UNIT_PRICE',
line_total_amount NUMBER path 'TOTAL_AMOUNT',
material_master_code VARCHAR2(20) path 'MATERIAL_MASTER_CODE',
material_group_code VARCHAR2(10) path 'MATERIAL_GROUP_CODE',
item_category_code VARCHAR2(18) path 'ITEM_CATEGORY_CODE',
line_admin_fee_sgd_amt NUMBER path 'ADMIN_FEE_SGD_AMOUNT',
instruction_supplier VARCHAR2(400) path 'INSTRUCTION_TO_SUPPLIER',
period_contract_line_no NUMBER path 'PERIOD_CONTRACT_LINE_NUMBER',
goods_inspect_flag VARCHAR2(1) path 'GOODS_INSPECT_FLAG',
pr_code VARCHAR2(17) path 'PURCHASE_REQUEST/CODE',
pr_line_number VARCHAR2(5) path 'PURCHASE_REQUEST/LINE_NUMBER',
nato_stock_number VARCHAR2(14) path 'PART_NUMBER_INFORMATION/NATO_STOCK_NUMBER',
manufacturer_part_no VARCHAR2(32) path 'PART_NUMBER_INFORMATION/MANUFACTURE_PART_NUMBER',
part_number VARCHAR2(200) path 'PART_NUMBER_INFORMATION/PART_NUMBER',
cage_code VARCHAR2(10) path 'PART_NUMBER_INFORMATION/CAGE_CODE',
cage_name VARCHAR2(140) path 'PART_NUMBER_INFORMATION/CAGE_NAME',
item_condition VARCHAR2(1) path 'PART_NUMBER_INFORMATION/ITEM_CONDITION' ,
minimum_shelf_life NUMBER path 'PART_NUMBER_INFORMATION/MINIMUM_SHELF_LIFE',
shelf_life_remaining VARCHAR2(3) path 'PART_NUMBER_INFORMATION/SHELF_LIFE_REMAINING',
cert_of_conformance VARCHAR2(1000) path 'PART_NUMBER_INFORMATION/CERTIFICATE_OF_CONFORMANCE',
export_license VARCHAR2(3) path 'PART_NUMBER_INFORMATION/EXPORT_LICENSE',
locations XMLTYPE path 'LOCATIONS'
)x2,
XMLTABLE('/LOCATIONS/LOCATION'
passing x2.locations
columns
line_location_no NUMBER path 'LINE_NUMBER',
line_loc_status VARCHAR2(15) path 'STATUS',
line_loc_status_date VARCHAR2(24) path 'STATUS_DATE',
line_loc_qty NUMBER path 'QUANTITY',
delivery_destination VARCHAR2(1000) path 'DELIVERY_DESTINATION',
delivery_date VARCHAR2(24) path 'DELIVERY_DATE',
delivery_terms VARCHAR2(3) path 'DELIVERY_TERMS',
port_of_origin VARCHAR2(150) path 'PORT_OF_ORIGIN',
recipient_code VARCHAR2(16 ) path 'RECIPIENT/CODE',
recipient_name VARCHAR2(40 ) path 'RECIPIENT/NAME',
recipient_phone VARCHAR2(23 ) path 'RECIPIENT/PHONE',
recipient_email VARCHAR2(100 ) path 'RECIPIENT/EMAIL',
distributions XMLTYPE path 'DISTRIBUTIONS'
)x3,
XMLTABLE('/DISTRIBUTIONS/DISTRIBUTION'
passing x3.distributions
columns
dist_line_no NUMBER path 'LINE_NUMBER',
dist_line_status VARCHAR2(15) path 'STATUS',
dist_line_status_date VARCHAR2(24) path 'STATUS_DATE',
dist_line_qty NUMBER path 'QUANTITY',
chart_of_account VARCHAR2(420) path 'CHART_OF_ACCOUNT',
project_distribution VARCHAR2(4000) path 'PROJECT_DISTRIBUTION'
)x4;
end;As there is change in requirement now I need to read the multiple supplier sites at the header level. Current this is my structure please give an idea how to read the mulitple sites as one record, probably i can increase the supplier site columns at table level so as to capture second site level information.
But if in case if i receive that time it should not fail please provide some good solution for this issue.
Thanks in advance for your help.
Regards
NagendraHi odie,
Thanks for your response. But here my supplier site will always be maxiumum 2 times and minimum 1 time. My thinking is to fit this one in the existing code by repeating the supplier site only like this
supp_site_id NUMBER path 'HEADER/SUPPLIER/SITES/SITE/ID',
supp_site_name VARCHAR2(140) path 'HEADER/SUPPLIER/SITES/SITE/NAME',
supp_site_phone VARCHAR2(23) path 'HEADER/SUPPLIER/SITES/SITE/PHONE',
supp_sit_phone_ext VARCHAR2(4 ) path 'HEADER/SUPPLIER/SITES/SITE/PHONE_EXTENSION',
supp_site_fax VARCHAR2(23 ) path 'HEADER/SUPPLIER/SITES/SITE/FAX',
supp_site_email VARCHAR2(100 ) path 'HEADER/SUPPLIER/SITES/SITE/EMAIL',
supp_site_add_line1 VARCHAR2(254 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE1',
supp_site_add_line2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE2',
supp_site_add_line3 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE3',
supp_site_country_code VARCHAR2(2 ) path 'HEADER/SUPPLIER/SITES/SITE/COUNTRY_CODE',
supp_site_province VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/PROVINCE',
supp_site_state VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/STATE',
supp_site_city VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/CITY',
supp_site_area_code VARCHAR2(10 ) path 'HEADER/SUPPLIER/SITES/SITE/AREA_CODE',
supp_site_zip VARCHAR2(20 ) path 'HEADER/SUPPLIER/SITES/SITE/ZIP',
supp_site_region_code VARCHAR2(3 ) path 'HEADER/SUPPLIER/SITES/SITE/REGION_CODE',
supp_site_id2 NUMBER path 'HEADER/SUPPLIER/SITES/SITE/ID',
supp_site_name2 VARCHAR2(140) path 'HEADER/SUPPLIER/SITES/SITE/NAME',
supp_site_phone2 VARCHAR2(23) path 'HEADER/SUPPLIER/SITES/SITE/PHONE',
supp_sit_phone_ext2 VARCHAR2(4 ) path 'HEADER/SUPPLIER/SITES/SITE/PHONE_EXTENSION',
supp_site_fax2 VARCHAR2(23 ) path 'HEADER/SUPPLIER/SITES/SITE/FAX',
supp_site_email2 VARCHAR2(100 ) path 'HEADER/SUPPLIER/SITES/SITE/EMAIL',
supp_site_add_line1_2 VARCHAR2(254 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE1',
supp_site_add_line2_2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE2',
supp_site_add_line3_2 VARCHAR2(35 ) path 'HEADER/SUPPLIER/SITES/SITE/ADDRESS_LINE3',
supp_site_country_code_2 VARCHAR2(2 ) path 'HEADER/SUPPLIER/SITES/SITE/COUNTRY_CODE',
supp_site_province_2 VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/PROVINCE',
supp_site_state_2 VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/STATE',
supp_site_city_2 VARCHAR2(25 ) path 'HEADER/SUPPLIER/SITES/SITE/CITY',
supp_site_area_code_2 VARCHAR2(10 ) path 'HEADER/SUPPLIER/SITES/SITE/AREA_CODE',
supp_site_zip_2 VARCHAR2(20 ) path 'HEADER/SUPPLIER/SITES/SITE/ZIP',
supp_site_region_code_2 VARCHAR2(3 ) path 'HEADER/SUPPLIER/SITES/SITE/REGION_CODE',As this table I am being used in many areas, it will be problem for me if try to go for different levels of tables. Or else can it be possible to read only once
I mean only the first in the xml tags and leave the second xml. As there is not much significant for the second one.
I appreciate your ideas on this, as the structure we are following is to rigid so I don't have much options to explore, please provide me your inputs in this context.
Thanks for your help.
Regards
Nagendra
Edited by: 838961 on Jul 13, 2011 1:43 AM -
Interested by performance issue ? Read this ! If you can explain, you're a master Jedi !
This is the question we will try to answer...
What si the bottle neck (hardware) of Adobe Premiere Pro CS6
I used PPBM5 as a benchmark testing template.
All the data and log as been collected using performance counter
First of all, describe my computer...
Operating System
Microsoft Windows 8 Pro 64-bit
CPU
Intel Xeon E5 2687W @ 3.10GHz
Sandy Bridge-EP/EX 32nm Technology
RAM
Corsair Dominator Platinum 64.0 GB DDR3
Motherboard
EVGA Corporation Classified SR-X
Graphics
PNY Nvidia Quadro 6000
EVGA Nvidia GTX 680 // Yes, I created bench stats for both card
Hard Drives
16.0GB Romex RAMDISK (RAID)
556GB LSI MegaRAID 9260-8i SATA3 6GB/s 5 disks with Fastpath Chip Installed (RAID 0)
I have other RAID installed, but not relevant for the present post...
PSU
Cosair 1000 Watts
After many days of tests, I wanna share my results with community and comment them.
CPU Introduction
I tested my cpu and pushed it at maximum speed to understand where is the limit, can I reach this limit and I've logged precisely all result in graph (See pictures 1).
Intro : I tested my E5-XEON 2687W (8 Cores Hyperthread - 16 threads) to know if programs can use the maximum of it. I used Prime 95 to get the result. // I know this seem to be ordinary, but you will understand soon...
The result : Yes, I can get 100% of my CPU with 1 program using 20 threads in parallel. The CPU gives everything it can !
Comment : I put 3 IO (cpu, disk, ram) on the graph of my computer during the test...
(picture 1)
Disk Introduction
I tested my disk and pushed it at maximum speed to understand where is the limit and I've logged precisely all result in graph (See pictures 2).
Intro : I tested my RAID 0 556GB (LSI MegaRAID 9260-8i SATA3 6GB/s 5 disks with Fastpath Chip Installed) to know if I can reach the maximum % disk usage (0% idle Time)
The result : As you can see in picture 2, yes, I can get the max of my drive at ~ 1.2 Gb/sec read/write steady !
Comment : I put 3 IO (cpu, disk, ram) on the graph of my computer during the test to see the impact of transfering many Go of data during ~10 sec...
(picture 2)
Now, I know my limits ! It's time to enter deeper in the subject !
PPBM5 (H.264) Result
I rendered the sequence (H.264) using Adobe Media Encoder.
The result :
My CPU is not used at 100%, the turn around 50%
My Disk is totally idle !
All the process usage are idle except process of (Adobe Media Encoder)
The transfert rate seem to be a wave (up and down). Probably caused by (Encrypt time.... write.... Encrypt time.... write...) // It's ok, ~5Mb/sec during transfert rate !
CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
RAM, more than enough ! 39 Go RAM free after the test ! // Excellent
~65 thread opened by Adobe Media Encoder (Good, thread is the sign that program try to using many cores !)
GPU Load on card seem to be a wave also ! (up and down) ~40% usage of GPU during the process of encoding.
GPU Ram get 1.2Go of RAM (But with GTX 680, no problem and Quadro 6000 with 6 GB RAM, no problem !)
Comment/Question : CPU is free (50%), disks are free (99%), GPU is free (60%), RAM is free (62%), my computer is not pushed at limit during the encoding process. Why ???? Is there some time delay in the encoding process ?
Other : Quadro 6000 & GTX 680 gives the same result !
(picture 3)
PPBM5 (Disk Test) Result (RAID LSI)
I rendered the sequence (Disk Test) using Adobe Media Encoder on my RAID 0 LSI disk.
The result :
My CPU is not used at 100%
My Disk wave and wave again, but far far from the limit !
All the process usage are idle except process of (Adobe Media Encoder)
The transfert rate wave and wave again (up and down). Probably caused by (Buffering time.... write.... Buffering time.... write...) // It's ok, ~375Mb/sec peak during transfert rate ! Easy !
CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
RAM, more than enough ! 40.5 Go RAM free after the test ! // Excellent
~48 thread opened by Adobe Media Encoder (Good, thread is the sign that program try to using many cores !)
GPU Load on card = 0 (This kind of encoding is GPU irrelevant)
GPU Ram get 400Mb of RAM (No usage for encoding)
Comment/Question : CPU is free (65%), disks are free (60%), GPU is free (100%), RAM is free (63%), my computer is not pushed at limit during the encoding process. Why ???? Is there some time delay in the encoding process ?
(picture 4)
PPBM5 (Disk Test) Result (Direct in RAMDrive)
I rendered the same sequence (Disk Test) using Adobe Media Encoder directly in my RamDrive
Comment/Question : Look at the transfert rate under (picture 5). It's exactly the same speed than with my RAID 0 LSI controller. Impossible ! Look in the same picture the transfert rate I can reach with the ramdrive (> 3.0 Gb/sec steady) and I don't go under 30% of disk usage. CPU is idle (70%), Disk is idle (100%), GPU is idle (100%) and RAM is free (63%). // This kind of results let me REALLY confused. It's smell bug and big problem with hardware and IO usage in CS6 !
(picture 5)
PPBM5 (MPEG-DVD) Result
I rendered the sequence (MPEG-DVD) using Adobe Media Encoder.
The result :
My CPU is not used at 100%
My Disk is totally idle !
All the process usage are idle except process of (Adobe Media Encoder)
The transfert rate wave and wave again (up and down). Probably caused by (Encoding time.... write.... Encoding time.... write...) // It's ok, ~2Mb/sec during transfert rate ! Real Joke !
CPU Power management give 100% of clock to CPU during the encoding process (it's ok, the clock is stable during process).
RAM, more than enough ! 40 Go RAM free after the test ! // Excellent
~80 thread opened by Adobe Media Encoder (Lot of thread, but it's ok in multi-thread apps!)
GPU Load on card = 100 (This use the maximum of my GPU)
GPU Ram get 1Gb of RAM
Comment/Question : CPU is free (70%), disks are free (98%), GPU is loaded (MAX), RAM is free (63%), my computer is pushed at limit during the encoding process for GPU only. Now, for this kind of encoding, the speed limit is affected by the slower IO (Video Card GPU)
Other : Quadro 6000 is slower than GTX 680 for this kind of encoding (~20 s slower than GTX).
(picture 6)
Encoding single clip FULL HD AVCHD to H.264 Result (Premiere Pro CS6)
You can look the result in the picture.
Comment/Question : CPU is free (55%), disks are free (99%), GPU is free (90%), RAM is free (65%), my computer is not pushed at limit during the encoding process. Why ???? Adobe Premiere seem to have some bug with thread management. My hardware is idle ! I understand AVCHD can be very difficult to decode, but where is the waste ? My computer want, but the software not !
(picture 7)
Render composition using 3D Raytracer in After Effects CS6
You can look the result in the picture.
Comment : GPU seems to be the bottle neck when using After Effects. CPU is free (99%), Disks are free (98%), Memory is free (60%) and it depend of the setting and type of project.
Other : Quadro 6000 & GTX 680 gives the same result in time for rendering the composition.
(picture 8)
Conclusion
There is nothing you can do (I thing) with CS6 to get better performance actually. GTX 680 is the best (Consumer grade card) and the Quadro 6000 is the best (Profressional card). Both of card give really similar result (I will probably return my GTX 680 since I not really get any better performance). I not used Tesla card with my Quadro, but actually, both, Premiere Pro & After Effects doesn't use multi GPU. I tried to used both card together (GTX & Quadro), but After Effects gives priority to the slower card (In this case, the GTX 680)
Premiere Pro, I'm speechless ! Premiere Pro is not able to get max performance of my computer. Not just 10% or 20%, but average 60%. I'm a programmor, multi-threadling apps are difficult to manage and I can understand Adobe's programmor. But actually, if anybody have comment about this post, tricks or any kind of solution, you can comment this post. It's seem to be a bug...
Thank you.Patrick,
I can't explain everything, but let me give you some background as I understand it.
The first issue is that CS6 has a far less efficient internal buffering or caching system than CS5/5.5. That is why the MPEG encoding in CS6 is roughly 2-3 times slower than the same test with CS5. There is some 'under-the-hood' processing going on that causes this significant performance loss.
The second issue is that AME does not handle regular memory and inter-process memory very well. I have described this here: Latest News
As to your test results, there are some other noteworthy things to mention. 3D Ray tracing in AE is not very good in using all CUDA cores. In fact it is lousy, it only uses very few cores and the threading is pretty bad and does not use the video card's capabilities effectively. Whether that is a driver issue with nVidia or an Adobe issue, I don't know, but whichever way you turn it, the end result is disappointing.
The overhead AME carries in our tests is something we are looking into and the next test will only use direct export and no longer the AME queue, to avoid some of the problems you saw. That entails other problems for us, since we lose the capability to check encoding logs, but a solution is in the works.
You see very low GPU usage during the H.264 test, since there are only very few accelerated parts in the timeline, in contrast to the MPEG2-DVD test, where there is rescaling going on and that is CUDA accelerated. The disk I/O test suffers from the problems mentioned above and is the reason that my own Disk I/O results are only 33 seconds with the current test, but when I extend the duration of that timeline to 3 hours, the direct export method gives me 22 seconds, although the amount of data to be written, 37,092 MB has increased threefold. An effective write speed of 1,686 MB/s.
There are a number of performance issues with CS6 that Adobe is aware of, but whether they can be solved and in what time, I haven't the faintest idea.
Just my $ 0.02 -
Neo2 Memory ratio issues, please read
hey all
very strang stuff...
just got a 3200+ winchester .90 CPU, its nice. also have 2x twinx corsair 3200 non LL ram.
idea: I had in mind that since my ram doesnt OC very well (220 max) I was going to get the neo2 and play with the FSB and set the ratio of the ram to 166 or something so that I could up the FSB which would in turn up the ram to around 200 or a bit over. thats the idea anyways...
result: initially I could not even post with this ram, had to flash to 1.3 but now it works. when I try to set the ram to 166 and start upping the fsb, I can get to around 220 fine. any more than 225 and I cant post... huh??? the ram is only running at 183 or so mhz at this point so I know its not that. I raised the voltage of both the cpu and ram to 10% and 2.80v and still had same problem...
ok, so I thought I would just change the fsb to 133... well again around 225 or so I cant post... ram is running at 150 only then, so definately not ram. I am lowering the HT to 4x and 3x and still no difference..
my last resort was 100mhz.... well oddly enough, when I set the ram to 100 I can up the FSB to 270 and it posts! I can boot windows at 260 fine, cpu is 2600 and ram is 133 at that point... well the ram doesnt bench too good there obviously, like 3100 in sandra.
the only other thing I could thing of was upping the FSB as high as I could go to get the ram up there and lower the cpu multi while leaving the ram at 100... I was able to get it up to 300 which the ram runs at 150 and booted into windows. but zcup said that HT was running at 300mhz... when I tried to up it from 3x to 4x it posted all weird, so I dont really want to stay at that level...
anyone else had issues changing the ratio?? I tried 1.37 with the same result.
facts: in 1:1 I can run up to 220 and boot windows, so ram runs fine at 220
: the CPU runs fine at 2.6ghz so the cpu is ok
the only conclusion I can come to is that the motherboard is wacked out.. I think the bios is crummy or something. I cant afford new ram; I just want to be able to change the ratio to 166 and have it work, is this too much to ask?
Should I RMA the board?I use an Antec TruPower and that is hindering my performance right now.
If its your ram that is failing use memtest to see at what speed it's failing. I started at (1:1) at 2.0 Ghz dropped the multi to 9 and slowly raised the fsb until memtest would give me errors. After finding a setting that was error free i then ran prime95 to see if it was really stable. I haven't been able to run 1:1 but i do hit 2.5Ghz without any memtest or prime95 errors.
"the only other thing I could thing of was upping the FSB as high as I could go to get the ram up there and lower the cpu multi while leaving the ram at 100... I was able to get it up to 300 which the ram runs at 150 and booted into windows. but zcup said that HT was running at 300mhz... when I tried to up it from 3x to 4x it posted all weird, so I dont really want to stay at that level..."
You were running HT at 300 and tried to go from x3 to x4? I don't remember the exact number but you can't go over 1020-1040 on HT.
Edit: finally... (1:1), now just gotta test for hours on prime95...ugh. -
Performance issue showing read by other session Event
Hi All,
we are having a severe performance issue in my database when we are running batch jobs.
This was a new database(11.2.0.2) and we are testing the performance by running some batch jobs. These batch jobs included some inserts and updates.
I am seeing read by other session in top 5 timed events and cache buffers chains in Latch Miss Sources section.
Please help me to solve this out.
Inst Num Startup Time Release RAC
1 27-Feb-12 09:03 11.2.0.2.0 NO
Platform CPUs Cores Sockets Memory(GB)
Linux x86 64-bit 8 8 8 48.00
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 5605 29-Feb-12 03:00:27 63 4.5
End Snap: 5614 29-Feb-12 12:00:47 63 4.3
Elapsed: 540.32 (mins)
DB Time: 1,774.23 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,952M 1,952M Std Block Size: 16K
Shared Pool Size: 1,024M 1,024M Log Buffer: 18,868K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 3.3 0.8 0.02 0.05
DB CPU(s): 1.1 0.3 0.01 0.02
Redo size: 55,763.8 13,849.3
Logical reads: 23,906.6 5,937.4
Block changes: 325.7 80.9
Physical reads: 665.6 165.3
Physical writes: 40.4 10.0
User calls: 60.7 15.1
Parses: 10.6 2.6
Hard parses: 1.1 0.3
W/A MB processed: 0.6 0.2
Logons: 0.1 0.0
Executes: 151.2 37.6
Rollbacks: 0.0 0.0
Transactions: 4.0
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.94 Redo NoWait %: 100.00
Buffer Hit %: 97.90 In-memory Sort %: 100.00
Library Hit %: 98.06 Soft Parse %: 90.16
Execute to Parse %: 92.96 Latch Hit %: 100.00
Parse CPU to Parse Elapsd %: 76.71 % Non-Parse CPU: 98.57
Shared Pool Statistics Begin End
Memory Usage %: 89.38 87.96
% SQL with executions>1: 97.14 95.15
% Memory for SQL w/exec>1: 96.05 92.46
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
db file sequential read 14,092,706 65,613 5 61.6 User I/O
DB CPU 34,819 32.7
read by other session 308,534 1,260 4 1.2 User I/O
direct path read 97,454 987 10 .9 User I/O
db file scattered read 71,870 910 13 .9 User I/O
Host CPU (CPUs: 8 Cores: 8 Sockets: 8)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
0.43 0.36 13.7 0.6 9.7 85.7
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 13.5
% of busy CPU for Instance: 94.2
%DB time waiting for CPU - Resource Mgr: 0.0
Memory Statistics
~~~~~~~~~~~~~~~~~ Begin End
Host Mem (MB): 49,152.0 49,152.0
SGA use (MB): 3,072.0 3,072.0
PGA use (MB): 506.5 629.1
% Host Mem used for SGA+PGA: 7.28 7.53
Time Model Statistics
-> Total time in database user-calls (DB Time): 106453.8s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 105,531.1 99.1
DB CPU 34,818.8 32.7
parse time elapsed 714.7 .7
hard parse elapsed time 684.8 .6
PL/SQL execution elapsed time 161.9 .2
PL/SQL compilation elapsed time 44.2 .0
connection management call elapsed time 16.9 .0
hard parse (sharing criteria) elapsed time 10.2 .0
hard parse (bind mismatch) elapsed time 9.4 .0
sequence load elapsed time 2.9 .0
repeated bind elapsed time 0.5 .0
failed parse elapsed time 0.0 .0
DB time 106,453.8
background elapsed time 1,753.9
background cpu time 61.7
Operating System Statistics
-> *TIME statistic values are diffed.
All others display actual values. End Value is displayed if different
-> ordered by statistic type (CPU Use, Virtual Memory, Hardware Config), Name
Statistic Value End Value
BUSY_TIME 3,704,415
IDLE_TIME 22,203,740
IOWAIT_TIME 2,517,864
NICE_TIME 3
SYS_TIME 145,696
USER_TIME 3,557,758
LOAD 0 0
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 358,813,045,760
VM_OUT_BYTES 29,514,830,848
PHYSICAL_MEMORY_BYTES 51,539,607,552
NUM_CPUS 8
NUM_CPU_CORES 8
NUM_CPU_SOCKETS 8
GLOBAL_RECEIVE_SIZE_MAX 4,194,304
GLOBAL_SEND_SIZE_MAX 1,048,586
TCP_RECEIVE_SIZE_DEFAULT 87,380
TCP_RECEIVE_SIZE_MAX 4,194,304
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 4,194,304
TCP_SEND_SIZE_MIN 4,096
Operating System Statistics -
Snap Time Load %busy %user %sys %idle %iowait
29-Feb 03:00:27 0.4 N/A N/A N/A N/A N/A
29-Feb 04:00:35 1.4 11.9 11.2 0.6 88.1 14.3
29-Feb 05:00:41 1.7 13.8 13.2 0.6 86.2 15.8
29-Feb 06:00:48 1.5 14.0 13.5 0.6 86.0 12.3
29-Feb 07:01:00 1.8 16.3 15.8 0.5 83.7 10.4
29-Feb 08:00:12 2.6 23.2 22.5 0.6 76.8 12.6
29-Feb 09:00:26 1.3 16.6 16.0 0.5 83.4 5.7
29-Feb 10:00:33 1.2 13.8 13.3 0.5 86.2 2.0
29-Feb 11:00:43 1.3 14.5 14.0 0.5 85.5 3.8
29-Feb 12:00:47 0.4 4.9 4.2 0.7 95.1 10.6
Foreground Wait Class
-> s - second, ms - millisecond - 1000th of a second
-> ordered by wait time desc, waits desc
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
-> Captured Time accounts for 97.9% of Total DB time 106,453.79 (s)
-> Total FG Wait Time: 69,415.64 (s) DB CPU time: 34,818.79 (s)
Avg
%Time Total Wait wait
Wait Class Waits -outs Time (s) (ms) %DB time
User I/O 14,693,843 0 69,222 5 65.0
DB CPU 34,819 32.7
Commit 40,629 0 119 3 0.1
System I/O 26,504 0 57 2 0.1
Network 1,945,010 0 11 0 0.0
Other 125,200 99 4 0 0.0
Application 2,673 0 2 1 0.0
Concurrency 3,059 0 1 0 0.0
Configuration 31 19 0 15 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
db file sequential read 14,092,706 0 65,613 5 108.0 61.6
read by other session 308,534 0 1,260 4 2.4 1.2
direct path read 97,454 0 987 10 0.7 .9
db file scattered read 71,870 0 910 13 0.6 .9
db file parallel read 35,001 0 372 11 0.3 .3
log file sync 40,629 0 119 3 0.3 .1
control file sequential re 26,504 0 57 2 0.2 .1
direct path read temp 14,499 0 49 3 0.1 .0
direct path write temp 9,186 0 28 3 0.1 .0
SQL*Net message to client 1,923,973 0 5 0 14.7 .0
SQL*Net message from dblin 1,056 0 5 5 0.0 .0
Disk file operations I/O 8,848 0 2 0 0.1 .0
ASM file metadata operatio 36 0 2 54 0.0 .0
SQL*Net break/reset to cli 2,636 0 1 1 0.0 .0
ADR block file read 472 0 1 1 0.0 .0
os thread startup 8 0 1 74 0.0 .0
SQL*Net more data to clien 17,656 0 1 0 0.1 .0
asynch descriptor resize 123,852 100 0 0 0.9 .0
local write wait 110 0 0 4 0.0 .0
utl_file I/O 55,635 0 0 0 0.4 .0
log file switch (private s 8 0 0 52 0.0 .0
cursor: pin S wait on X 2 0 0 142 0.0 .0
enq: KO - fast object chec 13 0 0 20 0.0 .0
PX Deq: Slave Session Stat 248 0 0 1 0.0 .0
enq: RO - fast object reus 18 0 0 11 0.0 .0
latch: cache buffers chain 2,511 0 0 0 0.0 .0
latch: shared pool 195 0 0 1 0.0 .0
CSS initialization 12 0 0 8 0.0 .0
PX qref latch 54 100 0 2 0.0 .0
SQL*Net more data from cli 995 0 0 0 0.0 .0
SQL*Net more data from dbl 300 0 0 0 0.0 .0
kksfbc child completion 1 100 0 56 0.0 .0
library cache: mutex X 244 0 0 0 0.0 .0
PX Deq: Signal ACK RSG 124 0 0 0 0.0 .0
undo segment extension 6 100 0 7 0.0 .0
PX Deq: Signal ACK EXT 124 0 0 0 0.0 .0
library cache load lock 3 0 0 9 0.0 .0
ADR block file write 45 0 0 1 0.0 .0
CSS operation: action 12 0 0 2 0.0 .0
reliable message 28 0 0 1 0.0 .0
CSS operation: query 72 0 0 0 0.0 .0
latch: row cache objects 14 0 0 1 0.0 .0
enq: SQ - contention 17 0 0 0 0.0 .0
latch free 32 0 0 0 0.0 .0
buffer busy waits 52 0 0 0 0.0 .0
enq: PS - contention 16 0 0 0 0.0 .0
enq: TX - row lock content 6 0 0 1 0.0 .0
SQL*Net message to dblink 1,018 0 0 0 0.0 .0
cursor: pin S 23 0 0 0 0.0 .0
latch: cache buffers lru c 8 0 0 0 0.0 .0
SQL*Net message from clien 1,923,970 0 944,508 491 14.7
jobq slave wait 66,732 100 33,334 500 0.5
Streams AQ: waiting for me 6,481 100 32,412 5001 0.0
wait for unread message on 32,858 98 32,411 986 0.3
PX Deq: Execution Msg 1,448 0 190 131 0.0
PX Deq: Execute Reply 1,196 0 74 62 0.0
HS message to agent 228 0 4 19 0.0
single-task message 42 0 4 97 0.0
PX Deq Credit: send blkd 904 0 2 3 0.0
PX Deq Credit: need buffer 205 0 1 3 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
PX Deq: Table Q Normal 4,291 0 1 0 0.0
PX Deq: Join ACK 124 0 0 1 0.0
PX Deq: Parse Reply 124 0 0 0 0.0
KSV master wait 256 0 0 0 0.0
Latch Miss Sources
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
ASM map operation freeli kffmTranslate2 0 2 0
DML lock allocation ktadmc 0 2 0
FOB s.o list latch ksfd_allfob 0 2 2
In memory undo latch ktiFlushMe 0 5 0
In memory undo latch ktichg: child 0 3 0
PC and Classifier lists No latch 0 6 0
Real-time plan statistic keswxAddNewPlanEntry 0 20 20
SQL memory manager worka qesmmIRegisterWorkArea:1 0 1 1
active service list kswslogon: session logout 0 23 12
active service list kswssetsvc: PX session swi 0 6 1
active service list kswsite: service iterator 0 1 0
archive process latch kcrrgpll 0 3 3
cache buffers chains kcbgtcr_2 0 1,746 573
cache buffers chains kcbgtcr: fast path (cr pin 0 1,024 2,126
cache buffers chains kcbgcur_2 0 60 8
cache buffers chains kcbchg1: kslbegin: bufs no 0 16 3
cache buffers chains kcbgtcr: fast path 0 14 20
cache buffers chains kcbzibmlt: multi-block rea 0 10 0
cache buffers chains kcbrls_2 0 9 53
cache buffers chains kcbgtcr: kslbegin shared 0 8 1
cache buffers chains kcbrls_1 0 7 84
cache buffers chains kcbgtcr: kslbegin excl 0 6 14
cache buffers chains kcbnew: new latch again 0 6 0
cache buffers chains kcbzgb: scan from tail. no 0 6 0
cache buffers chains kcbzwb 0 5 8
cache buffers chains kcbgcur: fast path (shr) 0 3 0
cache buffers chains kcbget: pin buffer 0 3 0
cache buffers chains kcbzhngcbk2_1 0 1 0
cache buffers lru chain kcbzgws 0 19 0
cache buffers lru chain kcbo_link_q 0 3 0
call allocation ksuxds 0 14 10
call allocation ksudlp: top call 0 2 3
enqueue hash chains ksqgtl3 0 2 1
enqueue hash chains ksqrcl 0 1 2
enqueues ksqgel: create enqueue 0 1 0
object queue header oper kcbo_unlink_q 0 5 2
object queue header oper kcbo_sw_buf 0 2 0
object queue header oper kcbo_link_q 0 1 2
object queue header oper kcbo_switch_cq 0 1 2
object queue header oper kcbo_switch_mq_bg 0 1 4
parallel query alloc buf kxfpbalo 0 1 1
process allocation ksucrp:1 0 2 0
process queue reference kxfpqrsnd 0 1 0
qmn task queue latch kwqmnmvtsks: delay to read 0 1 0
redo allocation kcrfw_redo_gen: redo alloc 0 17 0
row cache objects kqreqd: reget 0 6 0
row cache objects kqrpre: find obj 0 6 13
row cache objects kqrso 0 2 0
row cache objects kqreqd 0 1 2
row cache objects kqrpre: init complete 0 1 1
shared pool kghalo 0 199 106
shared pool kghupr1 0 39 109
shared pool kghfre 0 18 19
shared pool kghalp 0 7 29
space background task la ktsj_grab_task 0 21 27
Mutex Sleep Summary
-> ordered by number of sleeps desc
Wait
Mutex Type Location Sleeps Time (ms)
Library Cache kglhdgn2 106 338 12
Library Cache kgllkc1 57 259 10
Library Cache kgllkdl1 85 123 21
Cursor Pin kkslce [KKSCHLPIN2] 70 286
Library Cache kglget2 2 31 1
Library Cache kglhdgn1 62 31 2
Library Cache kglpin1 4 26 1
Library Cache kglpnal1 90 18 0
Library Cache kglpndl1 95 15 2
Library Cache kgllldl2 112 6 0
Library Cache kglini1 32 1 0
-------------------------------------------------------------Thanks in advance.Hi,
Thanks for reply.
I provided one hour report.
Inst Num Startup Time Release RAC
1 27-Feb-12 09:03 11.2.0.2.0 NO
Platform CPUs Cores Sockets Memory(GB)
Linux x86 64-bit 8 8 8 48.00
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 5606 29-Feb-12 04:00:35 63 3.7
End Snap: 5607 29-Feb-12 05:00:41 63 3.6
Elapsed: 60.11 (mins)
DB Time: 382.67 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,952M 1,952M Std Block Size: 16K
Shared Pool Size: 1,024M 1,024M Log Buffer: 18,868K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 6.4 0.8 0.03 0.03
DB CPU(s): 1.0 0.1 0.00 0.00
Redo size: 84,539.3 10,425.6
Logical reads: 23,345.6 2,879.1
Block changes: 386.5 47.7
Physical reads: 1,605.0 197.9
Physical writes: 7.1 0.9
User calls: 233.9 28.9
Parses: 4.0 0.5
Hard parses: 0.1 0.0
W/A MB processed: 0.1 0.0
Logons: 0.1 0.0
Executes: 210.9 26.0
Rollbacks: 0.0 0.0
Transactions: 8.1
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.62 Redo NoWait %: 100.00
Buffer Hit %: 95.57 In-memory Sort %: 100.00
Library Hit %: 99.90 Soft Parse %: 98.68
Execute to Parse %: 98.10 Latch Hit %: 99.99
Parse CPU to Parse Elapsd %: 32.08 % Non-Parse CPU: 99.90
Shared Pool Statistics Begin End
Memory Usage %: 89.25 89.45
% SQL with executions>1: 96.79 97.52
% Memory for SQL w/exec>1: 95.67 96.56
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
db file sequential read 3,054,464 17,002 6 74.0 User I/O
DB CPU 3,748 16.3
read by other session 199,603 796 4 3.5 User I/O
direct path read 46,301 439 9 1.9 User I/O
db file scattered read 21,113 269 13 1.2 User I/O
Host CPU (CPUs: 8 Cores: 8 Sockets: 8)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
1.45 1.67 13.2 0.6 15.8 86.2
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 13.0
% of busy CPU for Instance: 94.7
%DB time waiting for CPU - Resource Mgr: 0.0
Memory Statistics
~~~~~~~~~~~~~~~~~ Begin End
Host Mem (MB): 49,152.0 49,152.0
SGA use (MB): 3,072.0 3,072.0
PGA use (MB): 513.5 467.7
% Host Mem used for SGA+PGA: 7.29 7.20
Time Model Statistics
-> Total time in database user-calls (DB Time): 22960.5s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 22,835.9 99.5
DB CPU 3,748.4 16.3
parse time elapsed 15.4 .1
hard parse elapsed time 14.3 .1
PL/SQL execution elapsed time 7.5 .0
PL/SQL compilation elapsed time 6.0 .0
connection management call elapsed time 1.6 .0
sequence load elapsed time 0.4 .0
hard parse (sharing criteria) elapsed time 0.0 .0
repeated bind elapsed time 0.0 .0
failed parse elapsed time 0.0 .0
DB time 22,960.5
background elapsed time 238.1
background cpu time 4.9
Operating System Statistics
-> *TIME statistic values are diffed.
All others display actual values. End Value is displayed if different
-> ordered by statistic type (CPU Use, Virtual Memory, Hardware Config), Name
Statistic Value End Value
BUSY_TIME 396,506
IDLE_TIME 2,483,725
IOWAIT_TIME 455,495
NICE_TIME 0
SYS_TIME 16,163
USER_TIME 380,052
LOAD 1 2
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 95,646,943,232
VM_OUT_BYTES 1,686,059,008
PHYSICAL_MEMORY_BYTES 51,539,607,552
NUM_CPUS 8
NUM_CPU_CORES 8
NUM_CPU_SOCKETS 8
GLOBAL_RECEIVE_SIZE_MAX 4,194,304
GLOBAL_SEND_SIZE_MAX 1,048,586
TCP_RECEIVE_SIZE_DEFAULT 87,380
TCP_RECEIVE_SIZE_MAX 4,194,304
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 4,194,304
TCP_SEND_SIZE_MIN 4,096
Operating System Statistics -
Snap Time Load %busy %user %sys %idle %iowait
29-Feb 04:00:35 1.4 N/A N/A N/A N/A N/A
29-Feb 05:00:41 1.7 13.8 13.2 0.6 86.2 15.8
Foreground Wait Class
-> s - second, ms - millisecond - 1000th of a second
-> ordered by wait time desc, waits desc
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
-> Captured Time accounts for 97.6% of Total DB time 22,960.46 (s)
-> Total FG Wait Time: 18,651.75 (s) DB CPU time: 3,748.35 (s)
Avg
%Time Total Wait wait
Wait Class Waits -outs Time (s) (ms) %DB time
User I/O 3,327,253 0 18,576 6 80.9
DB CPU 3,748 16.3
Commit 23,882 0 69 3 0.3
System I/O 1,035 0 3 3 0.0
Network 842,393 0 2 0 0.0
Other 10,120 99 0 0 0.0
Configuration 3 0 0 58 0.0
Application 264 0 0 1 0.0
Concurrency 1,482 0 0 0 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
db file sequential read 3,054,464 0 17,002 6 104.5 74.0
read by other session 199,603 0 796 4 6.8 3.5
direct path read 46,301 0 439 9 1.6 1.9
db file scattered read 21,113 0 269 13 0.7 1.2
log file sync 23,882 0 69 3 0.8 .3
db file parallel read 4,727 0 68 14 0.2 .3
control file sequential re 1,035 0 3 3 0.0 .0
SQL*Net message to client 840,792 0 2 0 28.8 .0
direct path read temp 95 0 2 18 0.0 .0
local write wait 79 0 0 4 0.0 .0
Disk file operations I/O 870 0 0 0 0.0 .0
ASM file metadata operatio 4 0 0 50 0.0 .0
log file switch (private s 3 0 0 58 0.0 .0
ADR block file read 36 0 0 3 0.0 .0
enq: RO - fast object reus 5 0 0 16 0.0 .0
latch: cache buffers chain 1,465 0 0 0 0.1 .0
SQL*Net break/reset to cli 256 0 0 0 0.0 .0
asynch descriptor resize 10,059 100 0 0 0.3 .0
SQL*Net more data to clien 1,510 0 0 0 0.1 .0
enq: KO - fast object chec 3 0 0 8 0.0 .0
SQL*Net more data from cli 91 0 0 0 0.0 .0
latch: shared pool 14 0 0 0 0.0 .0
ADR block file write 5 0 0 1 0.0 .0
reliable message 8 0 0 0 0.0 .0
direct path write temp 1 0 0 2 0.0 .0
SQL*Net message from clien 840,794 0 68,885 82 28.8
jobq slave wait 7,365 100 3,679 499 0.3
Streams AQ: waiting for me 721 100 3,605 5000 0.0
wait for unread message on 3,648 98 3,603 988 0.1
KSV master wait 20 0 0 0 0.0
Background Wait Events
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 29,353 0 83 3 1.0 34.8
db file parallel write 5,753 0 17 3 0.2 6.9
db file sequential read 1,638 0 15 9 0.1 6.1
control file sequential re 5,142 0 13 2 0.2 5.4
os thread startup 140 0 8 58 0.0 3.4
control file parallel writ 1,440 0 8 6 0.0 3.4
log file sequential read 304 0 8 26 0.0 3.3
db file scattered read 214 0 2 9 0.0 .8
ASM file metadata operatio 1,199 0 1 1 0.0 .3
direct path write 35 0 0 6 0.0 .1
direct path read 41 0 0 5 0.0 .1
kfk: async disk IO 6 0 0 9 0.0 .0
Disk file operations I/O 1,266 0 0 0 0.0 .0
ADR block file read 16 0 0 2 0.0 .0
read by other session 3 0 0 8 0.0 .0
Log archive I/O 2 0 0 10 0.0 .0
log file sync 3 0 0 5 0.0 .0
asynch descriptor resize 341 100 0 0 0.0 .0
CSS initialization 1 0 0 6 0.0 .0
log file single write 4 0 0 1 0.0 .0
latch: redo allocation 3 0 0 1 0.0 .0
ADR block file write 5 0 0 1 0.0 .0
LGWR wait for redo copy 45 0 0 0 0.0 .0
CSS operation: query 6 0 0 0 0.0 .0
CSS operation: action 1 0 0 1 0.0 .0
SQL*Net message to client 420 0 0 0 0.0 .0
rdbms ipc message 47,816 39 61,046 1277 1.6
DIAG idle wait 7,200 100 7,200 1000 0.2
Space Manager: slave idle 1,146 98 5,674 4951 0.0
class slave wait 284 0 3,983 14026 0.0
dispatcher timer 61 100 3,660 60006 0.0
Streams AQ: qmn coordinato 258 50 3,613 14003 0.0
Streams AQ: qmn slave idle 130 0 3,613 27789 0.0
Streams AQ: waiting for ti 7 71 3,608 515430 0.0
wait for unread message on 3,605 100 3,606 1000 0.1
pmon timer 1,201 100 3,604 3001 0.0
smon timer 15 73 3,603 240207 0.0
ASM background timer 754 0 3,602 4777 0.0
shared server idle wait 120 100 3,601 30006 0.0
SQL*Net message from clien 554 0 4 7 0.0
KSV master wait 101 0 0 2 0.0
Wait Event Histogram
-> Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
-> % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
-> % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
-> Ordered by Event (idle events last)
% of Waits
Total
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 52 73.1 1.9 9.6 13.5 1.9
ADR block file write 10 100.0
ADR file lock 12 100.0
ARCH wait for archivelog l 3 100.0
ASM file metadata operatio 1203 97.3 .5 .7 .3 .2 .9
CSS initialization 1 100.0
CSS operation: action 1 100.0
CSS operation: query 6 83.3 16.7
Disk file operations I/O 2118 95.4 4.5 .1
LGWR wait for redo copy 45 100.0
Log archive I/O 2 100.0
SQL*Net break/reset to cli 256 99.6 .4
SQL*Net message to client 839.9 100.0 .0
SQL*Net more data from cli 91 100.0
SQL*Net more data to clien 1503 100.0
asynch descriptor resize 10.4K 100.0
buffer busy waits 2 100.0
control file parallel writ 1440 5.7 35.1 24.0 16.3 12.0 5.5 1.5
control file sequential re 6177 69.4 7.5 5.9 8.1 7.1 1.7 .3
db file parallel read 4727 1.7 3.2 3.2 10.1 46.6 33.3 1.8
db file parallel write 5755 42.3 21.3 18.6 11.2 4.6 1.4 .5
db file scattered read 21.5K 8.4 4.3 11.9 18.9 26.3 25.3 4.9
db file sequential read 3053. 28.7 15.1 11.1 17.9 21.5 5.4 .3 .0
direct path read 46.3K 9.9 8.8 18.5 21.7 22.8 15.7 2.7
direct path read temp 95 9.5 9.5 23.2 49.5 8.4
direct path write 35 11.4 31.4 17.1 22.9 11.4 2.9 2.9
direct path write temp 1 100.0
enq: KO - fast object chec 3 66.7 33.3
enq: RO - fast object reus 5 20.0 20.0 20.0 20.0 20.0
kfk: async disk IO 6 50.0 16.7 16.7 16.7
latch free 3 100.0
latch: cache buffers chain 1465 100.0
latch: cache buffers lru c 1 100.0
latch: object queue header 2 100.0
latch: redo allocation 3 33.3 33.3 33.3
latch: row cache objects 2 100.0
latch: shared pool 15 93.3 6.7
local write wait 79 35.4 34.2 21.5 8.9
log file parallel write 29.4K 47.8 21.7 11.9 9.9 6.8 1.6 .3
log file sequential read 304 6.3 3.0 3.6 10.2 23.4 24.3 29.3
log file single write 4 25.0 75.0
log file switch (private s 3 100.0
log file sync 23.9K 40.9 28.0 12.9 9.7 6.7 1.5 .3
os thread startup 140 100.0
read by other session 199.6 37.1 19.9 12.9 13.1 13.8 3.1 .2
reliable message 8 100.0
ASM background timer 755 2.9 .4 .1 .1 .3 .1 .3 95.8
DIAG idle wait 7196 100.0
KSV master wait 121 88.4 2.5 3.3 2.5 .8 .8 1.7
SQL*Net message from clien 840.1 97.1 1.8 .5 .2 .2 .1 .0 .1
Space Manager: slave idle 1147 .1 .5 99.4
Streams AQ: qmn coordinato 258 49.6 .4 50.0
Streams AQ: qmn slave idle 130 .8 99.2
Streams AQ: waiting for me 721 100.0
Streams AQ: waiting for ti 7 28.6 42.9 28.6
class slave wait 283 39.9 2.5 2.5 3.5 4.9 9.2 15.2 22.3
dispatcher timer 60 100.0
jobq slave wait 7360 .0 .0 .0 99.9
pmon timer 1201 100.0
rdbms ipc message 47.8K 2.7 31.6 17.4 1.1 1.1 .9 20.9 24.3
Wait Event Histogram DB/Inst: I2KPROD/I2KPROD Snaps: 5606-5607
-> Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
-> % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
-> % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
-> Ordered by Event (idle events last)
% of Waits
Total
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
shared server idle wait 120 100.0
smon timer 16 6.3 93.8
wait for unread message on 7250 .1 99.9
Latch Miss Sources
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
In memory undo latch ktichg: child 0 1 0
active service list kswslogon: session logout 0 2 0
cache buffers chains kcbgtcr_2 0 1,123 483
cache buffers chains kcbgtcr: fast path (cr pin 0 496 1,131
cache buffers chains kcbrls_2 0 5 6
cache buffers chains kcbgcur_2 0 4 0
cache buffers chains kcbgtcr: fast path 0 3 1
cache buffers chains kcbzwb 0 2 4
cache buffers chains kcbchg1: kslbegin: bufs no 0 1 0
cache buffers chains kcbnew: new latch again 0 1 0
cache buffers chains kcbrls_1 0 1 6
cache buffers chains kcbzgb: scan from tail. no 0 1 0
cache buffers lru chain kcbzgws 0 1 0
object queue header oper kcbo_switch_cq 0 1 0
object queue header oper kcbo_switch_mq_bg 0 1 2
redo allocation kcrfw_redo_gen: redo alloc 0 3 0
row cache objects kqrpre: find obj 0 1 1
row cache objects kqrso 0 1 0
shared pool kghalo 0 13 3
shared pool kghupr1 0 4 15
shared pool kghalp 0 1 0
space background task la ktsj_grab_task 0 2 2
------------------------------------------------------------- -
For all those out there with Iphone5 WIFI issues,Please READ THIS
I pre-ordered my iphone 5 (Black) got that last week. Quickly backed up my Iphone 4 and Restored my iphone 5.The first thing i checked to see is connecting to my WIFI network at home. And i kept getting a message "UNABLE TO CONNECT TO THE NETWORK". I had the iphone 4 aside and i can see iphone 4 is connected just fine. So are my laptop, Ipad and other devices.
So what is different in Iphone5?
After couple of days of head banging, and phone calls with apple support. I finally gave up and went to a apple store , they said, They have not heard any WIFI issues and my case was the first , However to keep me happy they said they will replace my device, But if have the same issue ,they will NOT be able to replace it again. And they even showed me the new iphoen connects to their "Non-secured" apple WIFI network.
So i take the new phone home, and the first thing i try is connecting to WIFI.And i still get "Unable to connect to the wifi network ".And i still can see Iphone 4 working fine and connecting to the same network just fine. With the second iphone5 also not working, I realized it is not hardware, but something surely changed with WIFI in iphone 5. I have a NETGEAR router with its latest firmware installed(2.0.26). I then downgraded my firmware to 2.0.21, then gave a shot.
BINGO..Iphone 5 works fine connects to wifi.and so is my iphone4 too.
So for all those users out there, the fact is something changed in iphone 5 WIFI algorithm. And if anyone really disagrees with me on this, I am going to post a video to demonstrate on YOUTUBE. I believe it is completely UNFAIR for apple to now ask you Upgrade/change your router or its firmware. And it is not fair for router companies to Fix anything to make their firmware compatible with iphone5.
So iphone 5 Users, Please lets us all push for a fix on this issue. WE WANT FIX.I can't tell you how frustrated/disappointed I was when this exact situation happened to me. I upgraded my wife's iPhone 4 to an iPhone 5 just to find out that it wouldn't connect to my home wifi but would connect everywhere else. Guess what...
I found a fix!!
On you iPhone go to Settings, General, About, scroll to "WiFi Address". Now stay there.
Log-in to your modem thru your web browser via IP Address. (Keep in mind, I use a 2Wire modem, yours may be different) Clicked "Wireless" for wireless settings, scrolled down to "MAC Filtering" and clicked "Edit Allowed/Blocked Device List". At the bottom, there's a field to which you can manually enter a MAC address to you allow or block. If you're using a different modem with different menus/options, just browse around til you find a similar option of manually adding MAC addresses for access or blocking.
MAC Address = Wifi Address. See where i'm going with this?
Type the WiFi Address from you iPhone in the MAC address field, click "Add to List". If MAC filtering is enabled, it'll be added to the BLOCK list, simply click on the address, and click the double arrow pointing towards the ALLOW list so it'll transfer lists to where you want it, then click save.
Now go back to your iPhone and attempt to re-connect to your wifi network as you normally would & voila!
This worked for me, i hope it works for you as well. -
List of issues: random reboots, sound issue, battery reading
Hey all,
I am having the following issues with my Macbook (late 2007, running on Snow Leopard).
1) The battery power indicator isn't giving a correct read. It remains stuck at 95% or 99% most of the time while the led on the battery cord is burning bright green for hours...
When I asked my local reseller if this could be related to my new bought battery, he checked the battery (which is under warranty) and informed that the battery was ok so he feared it would a more expensive issue inside my Macbook.
2)When I turn on my Macbook, the sound isn't working althought the soundbar is more then halfway open. When I increase or decrease the sound with one tap, it suddenly kicks in and works fine untill I turn the device off and o. Then it's the same old story all over again.
3) My Macbook randomly reboots. Without any warning (atleast not visible to me) you suddenly the distinct hardware sound of a reboot, the grey load screen with the Apple logo appears and only a few seconds latter (it's much faster then a normal reboot/restart) I am at the inlog screen and have to log in again.
I am not sure but, it's possible that issue 2 & 3 showed up after I installed Snow Leopard. Don't know if it's relevant or not.
I am praying for this to be a software related issue, but I have a nasty gutt feeling that is going to be a nasty hardware issues
Any thoughts, idea's or wonder solutions?I'll reply using the numbers aswell:
1) But is it also normal for the Macbook to keep saying that the (3months old battery) is at 99% even when it has been fully loaded in advance and has been connected for 12 hours to the powergrid?
2) I'll try to clearify:
You turn on the Macbook, according to the settings the sound is on yet programs like Adium and Mail don't produce sounds when it should be making a sound warning.
When you use the sound keys (either to increase or decrease the sound), the sound kicks in again.
Each time the device is turned back on this issue presents itself.
The device also doesn't seem to save the sound setting on which it is turned off, it simply resets to a setting at about 75 % of the volumebar.
3)I have been thinking that myself and have been expermenting with using the visitors account from time to time. However the reboots have been rare up till know (only 3 , max 4 times as far as I am aware) and only once (last night) when I was actually activly using the device.
This makes it rather annoying to downgrade or to switch main accounts permenantly for diagnostic purposes only. (I am not that familar with mac os to start doing this like downgrades at all to be honest)
Of the reboots I am 99.9% sure that they started after my upgrade to Snow Leopard. -
I can no longer download my purchased Reader's Digest magazine since August as it requires updating the RD app. So when i try to download the RD app a pop up appears and reads " the item you tried to buy is no longer available". What does this mean and what do I do? I have 2 pending reader's digest issues that needs to be downloaded.
I don't have an answer for you but it may help to have a look at the "More Like This" section at the far right of this page. Reading those additional threads may get you some idea of the actual issue and how to resolve it. It could be that problems were found with the app and it was temporarily pulled for some reason which may be the reason for the "the item you tried to buy is no longer available" message.
-
Performance issues in Reader 7
Hi,
We have a serious issue with performance in Reader 7. Our client is locked down to this version and we have developed our forms targeting this version in Designer but only recently discovered the performance problems. We seem to have pinpointed the problem to direct rendering in the form. When running the form in adobe reader 9, with direct rendering forced to off, we see the same symptoms that we saw on the adobe reader 7 client. The symptoms are that the memory usage of the acroRd32.exe process rises steadily as we interact with the form and does not come back down. After a time it becomes unusable as it takes about 25 seconds to move between fields. In version 9, with direct rendering on as default, this issue does not occur.
We disabled direct rendering in the XML source using:
<?originalXFAVersion http://www.xfa.org/schema/xfa-template/2.4/ LegacyRendering:1?>
Our client cannot upgrade their reader version and so we are in a very difficult position. If anyone can suggest a way to tackle this performance issue we will be very grateful.
Thanks,
KieranI'm working with Kieran on the same form and I think I have tracked the issue down to a difference between rendering methods in Adobe reader 7 and adobe reader 9. I drew up a benchmark test script and ran it before and after I disabled direct rendering. When runing the form in adobe reader 9, but with direct rendering forced to off. I see the same symptoms that I saw on the adobe reader 7 client.
I disabled direct rendering using:
<?originalXFAVersion http://www.xfa.org/schema/xfa-template/2.4/ LegacyRendering:1?>
Does anyone know of particular objects or methods that might be handled poorly by the legacy rendering mode found in adobe reader 7 (XFA 2.4 and earlier)?
Thanks
David -
Mac / Adobe Compatibility Issues with Reader X1 & Acrobat X1
I'm using Acrobat X1 11.0.10 and Reader 11.0.10 with Mac OS X ( 10.8.5).
In Reader, when I click the "show next page" down arrow, it takes around 5 seconds to jump to the next page. (scrolling to the next page via the scroll bar works fine).
In Acrobat, when I use the text edit tools, it can take up to 10 seconds before I can edit a word (remove or add a letter).Oftentimes, Acrobat will highlight the whole paragraph rather than just the word I select. (I think this is due to the lag time.) When I backspace to remove a word, nothing happens ... for several seconds. Then letters begin disappearing.
I reverted from Mavericks and Yosemite back to Lion (or Mountain Lion - I forget what they called 10.8.5) in the hopes of fixing this issue. When I say reverted back. I did a full install. Wiped the hard drive, loaded 10.8.5 and started this Mac as if it were new.
Is there a version of Reader and Acrobat that work with Mac OS X ( 10.8.5)?Hi,
Acrobat 11 is compatible with MAC 10.8.5. So, there are no compatibility issues.
Please let me know if this happens with every PDF or some specific one?
If specific, then please tell me what is the size of your PDF file.
You might also try repairing Acrobat from the Help menu.
Regards,
Anubha -
Issue with "read by other session" and a parallel MERGE query
Hi everyone,
we have run into an issue with a batch process updating a large table (12 million rows / a few GB, so it's not that large). The process is quite simple - load the 'increment' from a file into a working table (INCREMENT_TABLE) and apply it to the main table using a MERGE. The increment is rather small (usually less than 10k rows), but the MERGE runs for hours (literally) although the execution plan seems quite reasonable (can post it tomorrow, if needed).
The first thing we've checked is AWR report, and we've noticed this:
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 10,086 43.82
read by other session 3,968,673 9,179 2 39.88 User I/O
db file scattered read 1,058,889 2,307 2 10.02 User I/O
db file sequential read 408,499 600 1 2.61 User I/O
direct path read 132,430 459 3 1.99 User I/OSo obviously most of the time was consumed by "read by other session" wait event. There were no other queries running at the server, so in this case "other session" actually means "parallel processes" used to execute the same query. The main table (the one that's updated by the batch process) has "PARALLEL DEGREE 4" so Oracle spawns 4 processes.
I'm not sure how to fix this. I've read a lot of details about "read by other session" but I'm not sure it's the root cause - in the end, when two processes read the same block, it's quite natural that only one does the physical I/O while the other waits. What really seems suspicious is the number of waits - 4 million waits means 4 million blocks, 8kB each. That's about 32GB - the table has about 4GB, and there are less than 10k rows updated. So 32 GB is a bit overkill (OK, there are indexes etc. but still, that's 8x the size of the table).
So I'm thinking that the buffer cache is too small - one process reads the data into cache, then it's removed and read again. And again ...
One of the recommendations I've read was to increase the PCTFREE, to eliminate 'hot blocks' - but wouldn't that make the problem even worse (more blocks to read and keep in the cache)? Or am I completely wrong?
The database is 11gR2, the buffer cache is about 4GB. The storage is a SAN (but I don't think this is the bottleneck - according to the iostat results it performs much better in case of other batch jobs).OK, so a bit more details - we've managed to significantly decrease the estimated cost and runtime. All we had to do was a small change in the SQL - instead of
MERGE /*+ parallel(D DEFAULT)*/ INTO T_NOTUNIFIED_CLIENT D /*+ append */
USING (SELECT
FROM TMP_SODW_BB) S
ON (D.NCLIENT_KEY = S.NCLIENT_KEY AND D.CURRENT_RECORD = 'Y' AND S.DIFF_FLAG IN ('U', 'D'))
...(which is the query listed above) we have done this
MERGE /*+ parallel(D DEFAULT)*/ INTO T_NOTUNIFIED_CLIENT D /*+ append */
USING (SELECT
FROM TMP_SODW_BB AND DIFF_FLAG IN ('U', 'D')) S
ON (D.NCLIENT_KEY = S.NCLIENT_KEY AND D.CURRENT_RECORD = 'Y')
...i.e. we have moved the condition from the MERGE ON clause to the SELECT. And suddenly, the execution plan is this
OPERATION OBJECT_NAME OPTIONS COST
MERGE STATEMENT 239
MERGE T_NOTUNIFIED_CLIENT
PX COORDINATOR
PX SEND :TQ10000 QC (RANDOM) 239
VIEW
NESTED LOOPS OUTER 239
PX BLOCK ITERATOR
TABLE ACCESS TMP_SODW_BB FULL 2
Filter Predicates
OR
DIFF_FLAG='D'
DIFF_FLAG='U'
TABLE ACCESS T_NOTUNIFIED_CLIENT BY INDEX ROWID 3
INDEX AK_UQ_NOTUNIF_T_NOTUNI RANGE SCAN 2
Access Predicates
AND
D.NCLIENT_KEY(+)=NCLIENT_KEY
D.CURRENT_RECORD(+)='Y'
Filter Predicates
D.CURRENT_RECORD(+)='Y' Yes, I know the queries are not exactly the same - but we can fix that. The point is that the TMP_SODW_BB table contains 1639 rows in total, and 284 of them match the moved 'IN' condition. Even if we remove the condition altogether (i.e. 1639 rows have to be merged), the execution plan does not change (the cost increases to about 1300, which is proportional to the number of rows).
But with the original IN condition (that turns into an OR combination of predicates) in the MERGE ON clausule, the cost suddenly skyrockets to 990.000 and it's damn slow. It seems like a problem with cost estimation, because once we remove one of the values (so there's only one value in the IN clausule), it works fine again. So I guess it's a planner/estimator issue ...
Maybe you are looking for
-
Hello, I am using Lomboz with OC4J 10.3.1. While trying to add a new module, I get the error that some OC4J libs doesn't exist. This libs are: adminclient.jar oc4j-internal.jar ojdbc14dms.jar soap.jar has anyone an idea where I can find these jar fil
-
OTM 6.3 Integration with Oracle EBS 12.1.3
Hi, OTM 6.3 Integration with Oracle EBS 12.1.3 . Please suggest me with Oracle MOS DOC ID / steps to achieve this. Regards,
-
SQL 2012 Management Studio Remote Servers Service Status Slow/Stops Working
This is a huge annoyance. I manage about 50 SQL instances of SQL Server versions 2005-2012 and I noticed that it takes 1-2 seconds to load the service status (green arrow) on each individual server. If you then connect to a server, you have to wait
-
I need some advice about the macbook pro and iPhone 5. I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let
-
Issue With Moving Hard Drive Icons on My Desktop
I recently purchased 3 LaCie 1TB D2 quadra hard dives and daisy chained them to my MacBook Pro using the FireWire 800. I use one for the Time Machine, one to store my photos and one for back-up of my photos. This Lacie icon associated with a HD appea