Issues while Installing SOA 11g in windows 8

Hi Experts,
I am trying to install SOA Suite to my laptop which have windows 8. Data base and RCU and Weblogic everything is completed successfully with out any issues.
I have used oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32 for weblogic . When i am trying to run the G:\SOA_Software_Downloads\SOA_11g_64bit\unzip\ofm_soa_generic_11.1.1.7.01 of2\Disk1>setup -jreLoc C:\Oracle\Middleware\SOASuite11gR1PS6\jdk160_29, i am getting issue like on Prerequisite Checks 3 of 8 step is giving Checking operating system certification and Checking service pack status are in red with cross symbol but Checking physical memory status is checked.
I try to install generic weblogic as well wls1036_generic, which is giving error like The Java Run Time Environment was not found at C:\Program\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run. Please visit heep://www.javasoft.com and install JRE version 1.3.1 or higher and try again, but i have installed jdk1.6.0_35 from oracle, still same issue.
I uninstalled weblogic and tried different options all are facing similar issues, can any help me what is doing wrong here? what is missing
-Thanks,

Hi Sahil
I am using Win8 64bit OS. And I'm trying to install V37380-01_1of2.zip and V37380-01_2of2.zip after the jdk-7u51-windows-x64.exe and wls1036_generic.jar were installed in my pc successfully. Below are the setup in my PC:
JAVA_HOME = C:\Program Files\Java\jdk1.7.0_51; which is correct location in my pc;
PATH = PATH=C:\Program Files\Java\jdk1.7.0_51\bin;C:\Program Files\Java\jdk1.7.0_51\jre\bin;D:\ProgramFiles\product\11.2.0\dbhome_1\bin;
A foler 'jre7' in the same forder with JDK was generated after install JDK. That means there are two folders under folder 'C:\Program Files\Java' after JDK installation.
I ran the command setup.exe -jreLoc C:\Program Files\Java\jdk1.7.0_51\jre under SOA folder disk1 foder 'D:\Tools\SOA\Disk1'. Oracle Universal Installer error shows: The Java RunTime Environment was not found at C:\Program\bin\javaw.exe. Hence, the Oracle Universal Installer can't be run. Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
I checked there is no folder Program under C drive in my pc. so I don't know which part is wrong. Please advise, thanks.

Similar Messages

Issues installing SOA 11G on Windows

I am having trouble installing SOA 11.1.1.6 on Windows 64 bit.
1. I installed RCU
2. I installed JDK 1.7.0.25 in C:\Program Files\Java\jdk1.7.0.25
3. I installed Web Logic Server and selected jdk from above path.(since while installing WLS i din't find JROCKIT, so I browsed for JDK from my C:Drive)
4. While installing SOA 11G, when I give setup -jreLoc C:\Program Files\Java\jdk1.7.0_25 I am getting Error "Java Run Time Environment was not found in C:\Program\bin\javaw.exe"
I have set JAVA_HOME in Environment Variables.
Can some one please help me fix this issue.

Yes. I validated it. I tried with below 2 locations. I have installed this before in Windows and Linux. Strange that I am struggling to do it now..Not sure what I am missing.
C:\Program Files\Java\jdk1.7.0_25\jre
C:\Program Files\Java\jre7
When I try with Quotes i.e, setup -jreLoc "C:\Program Files\Java\jdk1.7.0_25\jre"I get a screen with Error:setup.exe has stopped working (below is the log)
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    setup.exe_unknown
Application Version:    0.0.0.0
Application Timestamp:    4e71ef42
Fault Module Name:    setup.exe
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4e71ef42
Exception Code:    c0000005
Exception Offset:    00002b2f
OS Version:    6.1.7601.2.1.0.272.7
Locale ID:    1033
Additional Information 1:    cb5a
Additional Information 2:    cb5adf8f5bac4bc39db6c83fb76b8021
Additional Information 3:    855b
Additional Information 4:    855b1466c96ca73472fe5c46cb1df042
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Facing Issue while Installing SOA server for setting up BPM11g working environment

Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!

Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan

Issue while starting SOA 11G BAM server

Hi ,
I have installed SOA 11G( 11.1.1.5.0 ) . I am trying to start BAM server . It is waiting for longer time while coming to the below mentioned log location
<Dec 23, 2011 2:09:13 PM IST> <Warning> <oracle.sdp.messaging.driver.base> <SDP-26024> <Registration of driver Email-Driver did not complete; will retry periodically until messaging server responds.>
Please anyone help me to start the BAM Server quickly.
Thanks in Advance,
Saba

I am also getting the same issue. Can someone let me know why is this issue happening.

About memory issue during installing Oracle 11g on Windows Server 2003

Hi, all
When I installed Oracle 11g on Windows Server 2003 which the server is a virtual server, Oracle only can detect 2G memory.
But there are 4G memory with my server.
I want to know if the Oracle 11g's new feature or the virtual server lead the issue.
Also , I want to get your help to resolve the issue, thanks a lot.

Let me get this straight:
You have created some virtual machine using someone's unknown VM software.
You have installed Windows Server 2003 (perhaps, but not confirmed 32-bit) to that VM.
You have allocated 4GB of memory to the VM (we guess ... not sure I'm ready to take your word on this)
You are attempting to install Oracle 11g (presumably 11gR1 32 bit for Windows) in the VM
And the Oracle (installer?) seems to be reporting that you only have 2GB RAM.
Since I personally have installed Oracle 11g 32bit for Windows on Windows 2003 server with 4GB RAM and had no issues, I would be investigating the (unknown) VM environment.

RPM package issue while installing SOA on Linux - OIM 11gR2 PS1

Hi All,
While installing SOA on linux machine. I am facing issue with kernel properties in Prerequisite section.
So i tried to run rpm package : " libaio-devel-0.3.106-3.2.i386.rpm " on my machine,
through command : rpm - ivh libaio-devel-0.3.106-3.2.i386.rpm
I am getting Error message is :
warning: libaio-devel-0.3.106-3.2.i386.rpm: Header V3 DSA/SHA1 Signature, key ID e8562897: NOKEY
error: Failed dependencies:
libaio.so.1 is needed by libaio-devel-0.3.106-3.2.i386
Please provide some helpful pointer on this
Thanks in advance,
RPB

Hi, Jasdeep!
We have the same problem with OIM 11.1.2 on Solaris SPARC 10 - just after extend WLS domain to OIM & SOA servers AdminServer fails to start with message "syntax error at line 30: `JVM_TYPE=$' unexpected"
It seems like uncompatibility of file $DOMAIN_HOME/bin/setOIMDomainEnv.sh and Solaris systems... :-(
I changed *$DOMAIN_HOME/bin/setOIMDomainEnv.sh* : instead of
PORT_MEM_ARGS="-Xms768m -Xmx1536m -XX:ReservedCodeCacheSize=256m"
JVM_TYPE=$(java -version 2>&1 >/dev/null)
*echo "JVM Type is ${JVM_TYPE}"*
*echo "$JVM_TYPE" | grep -q 'JRockit'*
wrote
*#PORT_MEM_ARGS="-Xms768m -Xmx1536m -XX:ReservedCodeCacheSize=256m"*
*PORT_MEM_ARGS="-Xms768m -Xmx1536m"*
*#JVM_TYPE=$(java -version 2>&1 >/dev/null)*
*JVM_TYPE=JRockit*
*echo "JVM Type is ${JVM_TYPE}"*
*#echo "$JVM_TYPE" | grep -q 'JRockit'*
*echo "$JVM_TYPE" | grep 'JRockit'*
and after that AdminServer started normally.
Try to make similar changes (according your JVM, of course)
Alexander.

Issue while installing SOA in Oracle Linux 6

Hi,
I am getting below errors while installing SOA in oracle Linux 6:-
entryPoint: entryPoint = oracle.installType.all condition = null className = null
contextFile:/tmp/OraInstall2012-04-13_08-04-44PM/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check Name:CertifiedVersions
Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
$$$$$DEBUG>>>>CertifiedVersions
Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: redhat-6.2
Check complete. The overall result of this check is: Failed <<<<
Check Name:Packages
Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
Check complete. The overall result of this check is: Not executed <<<<
Please help.
Check Name:Kernel
Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
Check complete. The overall result of this check is: Not executed <<<<

it is not supported
http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
just filter it on wls server on which soa runs rhel 5 is the latest

Installing SOA 11g on Windows XP 64 bit

Hi!
I wat to install Oracle SOA Suite 11g on Windows XP 64 bit.
Probably I have to install separate 64 bit JDK? Are there any other tricks or issueses?
Thx

SOA Suite 11g works on 64 bit perfectly
you need to first install 64 bit jdk, then other components
this below links will give complete details about soa11g installation :
http://www.oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.pdf
http://www.xenta.nl/blog/2010/05/01/oracle-soa-suite-11g-patch-set-2-installation/
http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1

Issue while installing SOA Suite

Hi,
I am trying to install SOA 11.1.1.4 in my machine. I already installed webllogic 10.3.4 in my system and when I am running through the GUI , the installer is not
allowing me to select "Weblogic Server " in Application Server section. Websphere is selected my default and I am not able to change it to weblogic server.
Is there any file where I can make changes to stop it from taking websphere as default option.
Regards,
Vikas Manchanda

Hi Vikas,
I believe it has been set correctly coz unless it points to the right home, it won't allow me to go the next screenThis is not the case.
If the installer detects a Middleware home with Oracle WebLogic Server installed, then this is the application server that will be used. All other fields in this screen will be inactive.
If the installer detects a Middleware home without an Oracle WebLogic Server installed, you must select one of the application server options and then provide its location in the Application Server Location field.
If the installer does not detect a Middleware home directory, the "WebLogic Server" option will be inactive. You must select "WebSphere" and then provide the location of your IBM WebSphere in the Application Server Location field.
Please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e13925/install_screens.htm#BABEDFHH
Regards,
Anuj

Rcu 6130 while installing SOA 11g

Hi,
I got the following error while running rcu.
RCU-6130:Action failed -
RCU-6136:Error while trying to execute SQLPlus action.
The dialog just has an OK button, so I dont think so I have much of an option.
In the status on the next page, it shows failed for oid schema.
The oid.log is as below
Executing SQL statement: drop tablespace OLTS_DEFAULT including contents and datafiles
Executing SQL statement: drop tablespace OLTS_SVRMGSTORE including contents and datafiles
Executing SQL statement: drop tablespace DEV_IAS_ORASDPM including contents and datafiles
Executing SQL statement: drop tablespace OLTS_BATTRSTORE including contents and datafiles
Executing SQL statement: drop tablespace DEV_SOAINFRA including contents and datafiles
Executing SQL statement: drop tablespace OLTS_CT_STORE including contents and datafiles
Executing SQL statement: drop tablespace DEV_MDS including contents and datafiles
Executing SQL statement: drop tablespace DEV_IAS_OIF including contents and datafiles
Executing SQL statement: drop tablespace IAS_TEMP including contents and datafiles
Executing SQL statement: drop tablespace OLTS_ATTRSTORE including contents and datafiles
Executing SQL statement: drop tablespace DEV_ORABAM including contents and datafiles
Any clues ? If this OID schema is not set, what happens..
Note:
I increased the processes to 550, open_cursors to 550 when the rcu complained..
I am installing ofm_rcu_win_11.1.1.2.0_disk1_1of1
TIA
Amit

Oracle Internet Directory (OID) schema shud not affect your SOA installation, But I see that sql statement drops the tablespace related to SOA infra and that is definitely going to cause the problem.
Make sure, you are connecting to database with Sysdba privileges and do you have a dynamic IP address or a static one on your machine.

Solution to "iPodService Error" issue while installing iTunes 10 for Window

This instruction applies to Windows XP:
Un-install iTunes 10...follow Apple's instructions to un-install iTunes 10.
Right Click on <My Computer> icon on your desktop
Select <Properties> from context menu
Select <Advanced> tab
Click <Settings> under Startup and Recovery
Click <Edit> under "To edit the startup options file...."
The boot.ini file should now be opened in Notepad. Check and update the following flag to match:
/noexecute=optin
Re-install iTunes 10
The process should be normal without the "ipodservice error messages".
It worked for me...Good Luck !
Someone had already posted this solution in one of the threads, so credit is due there, not here

HRESULT: 0x800736FD
Are you running Vista or Windows 7, josh?

Error while installing oracle 11g

Hi every I facing problem while installing it is showing error file not found dbhome_4 error
Please help me on this issue so That I will thank hull to you guys.
Thanks in advance
Chandrabhan

Hi,
It sounds you're installing Oracle 11g on Windows 7 64-bit. Have you downloaded 2 install packages prior to start the installation?
Regards,

DHCP cofiguration error while installing SOA suit 10.1.3

Hi can any one suggest how to resolve DHCP cofiguration error while installing SOA suit 10.1.3. I have win7 but getting this error . Please sort out................

platGroup = WINDOWS
Query Returned: true
Calling Query soaNetQueries1.0 isDhcp
Query Returned: true
Calling Query soaNetQueries1.0 isLoopback
Query Returned: false
A DHCP configuration was detected on this host. The installer also detected that the local hostname and the network hostname differ. Please resolve the networking issues by referring the "Installing on DHCP Computers" section in the installation guide.
Calling Query generalQueries10.1.0.3.0 getInstallType
Query Returned: allProducts
Calling Query generalQueries10.1.0.3.0 getInstallType
Query Returned: allProducts
Calling Query generalQueries10.1.0.3.0 getInstallType
Query Returned: allProducts
Calling Query generalQueries10.1.0.3.0 getInstallType
Query Returned: allProducts
*** Specify Database Connect Information Page***
Warning:*** Alert: Do you really want to exit? ***
User Selected: Yes/OK
User Exit
This is the error i am getting i have gone through docs also but did not able to resolve it i have window-7 platform can we install on this 10.1.3.........or i have to follow some other method as i am getting this error........

ERROR WHILE INSTALLING OIM 11G

Hi,
When i am installing the below error whille installing oim 11g on windows 7,
https://picasaweb.google.com/107742630291389085108/August42012#5772738295887214898
Could someone please help me.
Installations:
win32_11gR2_database
weblogic 10.3.5
ofm_iam_generic_11.1.1.5.0
ofm_soa_generic_11.1.1.6.0
Regards,
Ragu

Check oracle certification matrix first. Your SOA is uncertified. What error you are getting in logs? Check log file shown in image.
regards,
GP

Error Code 8024200D while installing update KB3000850 for Windows 8.1

Error Code 8024200D while installing update KB3000850 for Windows 8.1
I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
Hi Michelle,
Thank you for posting your query in Microsoft Community.
I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
Is your computer connected to domain?
Which security software is installed in the computer?
Do you remember making any specific change in the computer prior to the issue?
This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
improvements.
Cause:
This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
check the status.
Method 1: Depending on the architecture of your
Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
All supported x86-based versions of Windows 8.1: [link] Download the package now.
All supported x64-based versions of Windows 8.1:
[link] Download the package now.
Restart is required.
Method 2:
If the issue still persists, run the Windows Update Troubleshooter and check the status.
Click to run
[link] Windows Update Troubleshooter
Also refer to:
[link] Troubleshoot problems with installing updates
Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
Regards,
Niranjan Manjhi
Dear Niranjan,
Thank you for your answer.
To answer your questions:
1) Yes, my laptop is connected to the domain,
2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
In your answer, you suggested 2 methods for resolving the problem.
I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
Potential Windows Update Database error detected Ox800F08F: Not fixed
Windows Update components must be repaired: Fixed
And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
Michelle
Hi Michelle,
Thank you for keeping us updated on the issue.
Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
Please post your question in the link TechNet Forums.
Regards,
Niranjan Manjhi

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Issues while Installing SOA 11g in windows 8

Similar Messages

Maybe you are looking for