Issues with 1920 resolution, fonts look tweak and broken

i just bought a new led display, wich allows 1920x1080 resolution.
With this resolution fonts looks like tweak and broken, very annoying.
Firefox is the only application that suffers this problems. Opera and Internet Explorer looks perfect, and also all the others applications installed.
Clear Type option is activated, and works perfectly.
The only way to solve the probleme is to reboot firefox and execute in safe mode.
I have no extensions nor personal preferences (bookmarks either). I've just uninstalled Firefox with all personal data and reinstalled. And the issue stays.
In safe mode all looks perfectly.
I'm running windows 7 64bits
Graphics: RADEON HD 6950

I did a test using Chunk and a few other fonts that are similar plus one I know works well and the fonts that are similar to Chunk tend to look very pixelated when viewed in Firefox. Look fine in Chrome and Explorer...
This might be something that the techs at Adobe (Type Kit) would have to look at.
I posted an image, but not sure if it shows the problem that well.

Similar Messages

On Google Chrome the Adobe edge web font looks fuzzy and broken-up. Is there a way to fix this?

I have created a website with Adobe Muse and I am using an adobe edge web font that looks great on all browsers except for google Chrome... On chrome the font looks fuzzy and broken-up. Is there a way to fix this??? Thanks.

Thank you Sanjit,
I have redone the site using using the font TREBUCHET. The font that I was using that was giving me the problem was EXO which is an Adobe Edge Web font. I'd rather use EXO... Here is a screen shot of a sample page, areas where the type looks especially messed up are circled in red.
This only happens when opened in Google Chrome on a Windows PC. However it looks fine with Chrome on my MAC.
Regards,
Jan

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Issues with Code 39 Font

I am using Crystal Reports XI and have created reports that contain a single barcode. When I export the reports to a PDF format while in the designer preview the report exports fine with the barcode showing correctly. When I publish the report and automate to send to a file folder and a designated printer, both reports are printing without the code 39 Font and the barcode shows in regular Arial font. I have installed the Font both on my personal machine and the server that the reports are published too. To verify that the problem was not isolated to the PDF doc I tried printing to a word format and the report prints the code 39 font in the word doc that is stored in the file folder, but the printed report is still showing as a regular Arial font. Sending to the same printer from the designer preview printed the barcode font so the issue is also not at the printer level. Can anyone advise on the best action to take to resolve this issue with the missing Font in the printed report? Do I need to do anything special to embed the Font in the distributed report? Any help that can be provided is greatly appreciated. Thank you in advance.

Hi Greig,
Did you get your problem figure out? I'm having the same issue. Please let me know how you got this problem resolve. Thanks

Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)

Hi,
I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
The IIS Log on the reverse proxy showed:
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
After I installed a fix for ARR
http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.

Hi,
This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end.
Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing
<h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
When the client was trying to retrieve from the webticketservice.svc
2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
Request Id: 0x72cfc18
HttpHeader:Content-Length 1477
HttpHeader:Content-Type text/html
HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 502
Installed the HotFix from here:-
Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both.
I hope this helps others as I was losing the plot :-)
Cheers
Sam

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

Hi Seattle
From Adobe site only!
flashplayer11_b1_install_mac_071311.dmg
Works fine.
Cheers Tomi

Photoshop Elements 8 Mac - All fonts look jagged and pixely

HI,
I have the problem that all fonts look jagged and pixely when using Photoshop Elements 8 on Mac OS X 10.6.3. I am using the right image size 300dpi and so forth. Interestingly enough this only happens in Photoshop. If I repeat the procedure in Pixelmator everything is normal.
I would really appreciate any suggestions.

Are you simplifying the font layer and then making it larger? Can you explain exactly, step by step, what you're doing?

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

We have been having some issues with Email notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay

Resolution issue with macbook pro 13 (late 2013) and dell u2711

I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
Last week we got a MacBook Pro 13in, late 2013 model.
If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
I have zapped the pram, powered down the display etc etc etc and it made no difference.
I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
TIA.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

Issues with Home Hub 3 Wireless. And lousy teleph...

I don't know if this forum is moderated or followed by BT support staff, but I sure hope so.
After coming from Virgn Media for my BB to BT infinity (Awesome speeds btw!) I'm pleased with the connection and, up until today, the support. I now have issues with my Wireless devices on the HH3.
This is the outline of my setup:
I have the Open reach modem connected to the home hub. I then have the 1Gbps ethernet port from the home hub that is connected to a 1Gbps 5 Port switch that connects my wired network together (Consisting of my Xbox, Networked Printer and my Desktop PC). Wireless serves 2 Laptops, an Xperia U phone, and a G5 Ipod touch (not all mine, I have a flat mate).
My issue is that when more than one device connects via WiFi, the WiFi network has serious issues: The connections don't drop per se, but websites are not delivered, data transfer is intermittant at best - i.e. the WiFi network simply does not work. When there is only one device, there is no issue.
Now, being a techie (I don't mean to title drop, but I think it's important that technical support know that I know my stuff) I'm an electrical engineer (The graduate type) and I know my IT - so I have my own idea of what's wrong with this.
Now, as my order was not completed until yesterday, techincal support couldn't/wouldn't help until today. Yesterday, however, I spent hours trying to solve my issues and got as far semi-solving the problem. I managed to get everything working nicely together when Wireless N is disabled and only a/b/g is enabled. Great, but a main selling point is the Wireless N and I want to use this.
So, today I phoned technical support. I should also note here, and I made this perfectly clear with support, that when the WiFi starts to missbehave, the wired network still works perfectly and I have no issues with internet connectivity with any wired devices. So, clearly this is not a line fault - it's on this side, aka, the router WiFi side where the problem resides. Support decided to do a line test anyway - and of course it got the all clear. He then asked me to reset the router (Yey, again after I had done it plenty of times before, only this time I had customised the SSID and the LAN IP addresses and now they need done again). He then went on to state that I should receive an e-mail with instructions on what to do next, and if they are still issues to reply to a text message that will be sent.
Duly, an email arrived. It began with "Sorry you had to call us today about your wireless disconnecting. We’re pleased we could help you get it working again." and continued on with with this theme. No, my problem is not resolved! I phoned back, this time advising me to change channels, and check individual devices to see if they're any conflicts - I did this pretty quickly and disabled and re-enabled WiFi on my Laptop, phone, ipod and still to no avail.
I have now been told that I will get a phone call between 3 and 3:30pm to see if the WiFi will settle down. huh!
I don't mean to be such a pain and sound like such a git, but this is not an issue that I believe the technical support (via the call centre anyway) will be able to solve. This is an issue with the HH3, mine at least, not being able to handle mutiple WiFi devices conntected simualtaneously - all but one on N, the other on G. Now, I'm of the understanding that this shouldn't be a problem. I'm sick of telephone support going through their script without listening to the whole issue either or beleiving that I spent a good 2 hours yesterday getting to the bottom of this. I don't need line tests, I don't need resetting the router, I don't need changing channels - I've did all this!
So it looks as though I'm stuck on HH3 in 'G' for now until we solve this issue.
Further information: I'm using the type A HH3; again wired devices are not impacted in any way from this issue; I have tried multiple different channels; YES! I've reset the router and power cycled it; And this issue happens wether my WiFi devices are 1 meter away from the HH3 or 15 meters away.
Could this be a bad HH3 or frimware issue? Can someone suggest something or highlight something that I've perhaps overlooked or missed?

This is only a customer to custome help forum.
This link may help, although some of the things you may have already tried.
Wireless can prove quite unreliable, and an separate wireless access point can help.
Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Issue with photos in iMovie - looks normal in timeline but won't play

I'm having an issue with importing photos into iMovie. I've done it many a time without trouble but suddenly, when I really need it...ahh!
The problem is with a video I've already exported once—I'm not sure if that's related. I created a slide in Powerpoint, made it into a jpg, then dragged it into my timeline (also something I've done before without issue). It looks totally normal in the timeline, but when I play the video it shows a still from the previous clip instead of my photo. Any help would be greatly appreciated!
Thank you!

Gah. This is where I'm at...I'm using the code from above and
my mp3 sound file is ID'd in the linkage properties as monkey7.mp3
and it's still not working.
What buttons should be checked in the Linkage properties? If
my id is monkey7.mp3 and I check the Export for ActionScript
button, my sound file plays multiple times and it still won't stop.
If I do the same thing but ID it as "monkey7.mp3", it plays
correctly but won't stop.
I don't know if this matters but my mc where my sound file is
located is one frame. Is that correct?
I'm sure the code is correct but I'm missing something and I
can't figure it out!

Issue with HP 3600n, NetGear Wireless Router and SUBNETS!!

Hello All,
I want to say (admit) first off that I am a PC person. The school I work for has recently acquired some new iMacs and I have to say I am very impressed with the design, ease of use and reliability. I can't believe I am saying these things out loud! Here, however, is my dilemma and I am hoping a community with a little more experience than me can help out. I searched through these discussions already and found some useful info, but nothing to really nail it on the head. My situation may be unique, but I am not sure. Here goes:
The school building we occupy is very old. Each classroom has only ONE data drop in it. Each classroom has a few PCs and a few Macs (mostly the newer iMacs). In one classroom in particular, I am unable to print wireless-ly to a networked HP LaserJet 3600n I have setup elsewhere on the network. Here is the network breakdown:
Main network (FIOS modem to SonicPro 2040 Firewall)= 192.168.168.xx. The HP Printer has an IP address on this scope. The classrooms have a NetGear WGR16 setup to act as a switch and wireless access point. The WGR16 also distributes IPs on it's own subnet, 192.168.1.xx. The iMac connects wireless-ly to this NetGear and receives an IP of 192.168.1.xx.
The PCs in the classrooms connect directly to the NetGear Router via an Ethernet cable. The PCs can see the printer, the firewall and get out to the internet with no problems. They can print with no issues. The iMac, however, can get out to the internet but cannot see the HP printer on the other scope. I know how to add a printer in Windows directly via an IP address, but trying that with the Mac doesn't get me anywhere, probably because I am not doing something correctly. I can get the Mac to print to the HP printer's IP directly but it just sends garbled text to the printer and then shoots out 100 blank pages (lol).
The Mac, HOWEVER, can print with no problem wireless-ly to another networked printer I have elsewhere on another scope (it's a Lexmark C532n).
I am thinking the issue has more to do with the HP printer than anything else but my questions are:
1. What is the best way to have Macs recognize printers that are on different subnets if the built in features of Mac OSX aren't "seeing" the printer?
2. Are there any specific issues with the NetGear Router or HP Printer that I should know about and address to solve this issue?
3. We are a school on a limited budget so purchasing any additional hardware is not likely.
I appreciate anyone who has read this entire rambling discussion and certainly appreciate any help in moving things in the right direction. Please let me know if I need to clarify anything I have said here.
Thanks much!!

I just had the same problem with my MacBook Pro using 10.5.5 After trying a number of things, the following worked. (not sure what specifically ... just did this combination)
1. Had the Apple store Genius Bar folks install the latest HP drivers.
2. Restart computer
3. Restart the HP Color LaserJet 3600
4. Connected the HP printer and MacBook Pro directly into a switch, so the wireless was not an issue (both machines had IP addresses set and computer's was set to DHCP with manual IP).
5. Instead of using the System Preference printing and fax tool, I started Text Edit, typed something and said "print".
Print window came up and said "no printer selected"
6. I clicked on the drop down so it would look for printers.
7. It found the HP Color LaserJet 3600.
8. I clicked on the name of the printer and the computer went out and found the driver
9. I clicked on "Add" and it added the printer.
10. I tried a couple of test prints in different programs.
11. I disconnected the hard wired ethernet cables and set the computer to be on the wireless.
12. I printed a few more test prints in various programs.
I had previously tried selecting the printer and drivers through the System Preferences to no avail, but doing it this way worked.
Blessings

Issue with 10.9.2 looking NAS drive away from home network

I have a NAS drive on my home network. When I am away from my home network my MBP running 10.9.2 keeps looking for and not find ing the drive. It keeps interupting my work flow every few minutes. How do I resolve this issue? it is very annoying.

As a temporary workaround, of course, you can just turn Time Machine OFF.
There was a similar message, with reference to type "file" in the URL, but this one is differnent.
Have you ever used a 3rd-party utility, or followed any instructions to edit some files, to change Time Machine's default behavior?

Issues with 1920 resolution, fonts look tweak and broken

Similar Messages

Maybe you are looking for