ISSUES WITH 2.2 UPDATE ON THE ALLY
The option "Picture Frame" Under Widgets is no longer available. I would rather have the older version of Android back. Anyone no how to set it back to the older software? The dialpad is now smaller buttons and the ringtones selected are not setting right,,,,, Not liking the new one.
Thanks
I do apologize about the issues you are experiencing after your software update. Unfortunately, once the update has been completed for your device, there is no way of reverting the device back to the previous software.
Similar Messages
-
My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?
Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W. -
Issues with Ipad software update.
i'm currently experiencing issues with trying to update the software on my Ipad 2 (brand new). For instance:
1. when i try to update the software for my Ipad 2, the download doesn't go through, when i'm connected to the internet (which i've checked constantly).
2. when i try to update any of my applications (when there's an update available), none of the downloads go though, when i'm connected to the internet (which i've checked constantly).
i have had no problems BEFORE, whenever it came down to updating applications, etc. on my Ipad 2. i've tried updating more than five times and still the same problem. it's getting very frustrating, please fix this!!!
p.s. - when i tried to update, a box pops up and says:
when that popped up, i even checked my network settings, etc. and reset everything, and then tried updating. but the problem is still their!!!The eaiest solution is to download the update file directly from the links listed here:
http://osxdaily.com/2011/10/12/ios-5-download-available/
These are links to the Apple servers.
Pick the file that matches your device and dowload it. Connect the device to iTunes, and Option-Click the Update button (Shift-Click for Windows). This will give you a dialog to navigate to the file you downloaded.
Hope this helps -
Hello Gurus..... ISSUE with child Table update
I have an issue with child table update
I have created a GTC with one parent table and two child tables. I'm able to update the parent table and the values are found in db, but the ISSUE is the child Table values are not updating the db.
please give me a solution
regards
SrikanthIf you are keeping referential integrity in the database, not in the application, it is easy to find the child and parent tables. Here is a quick and dirty query. You can join this to dba_cons_columns to find out on which columns the referential constraints are defined. This lists all child-parent table including SYS and SYSTEM users. You can run this for specific users of course.
select cons1.owner child_owner,cons1.table_name child_table,
cons2.owner parent_owner,cons2.table_name parent_table
from dba_constraints cons1,dba_constraints cons2
where cons1.constraint_type='R'
and cons1.r_constraint_name=cons2.constraint_name; -
So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.Jeremy.Laurin,
have you tried agb76’s approach here? -
Issues with our SSL connection to the Web dispatcher
HI Alle,
I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
[Thr 368] =================================================
[Thr 368] = SSL Initialization on PC with Windows NT
[Thr 368] = (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 368] profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 368] profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] = found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 368] = current UserID: WDPEHT1\SAPServiceWDP
[Thr 368] = found SECUDIR environment variable
[Thr 368] = using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 368] * ERROR => secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c 1354]
[Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 4129 (0x00001021) = "The PSE does not exist"*
[Thr 368] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] << -
End of Secude-SSL Errorstack -
[Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c 2278]*
[Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 368] =================================================
[Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
[Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c 319]
[Thr 2128] IcmCreateWorkerThreads: created worker thread 0
RegardsHi Olivier,
Thanks for replay,
The PSE does exist in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" .
I did tried Again I get this error. I think I missing som parameter
= SSL Initialization on PC with Windows NT
[Thr 2292] = (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 2292] profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 2292] profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 2292] = found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 2292] = current UserID: WDPEHT1\SAPServiceWDP
[Thr 2292] = found SECUDIR environment variable
[Thr 2292] = using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 2292] -*ERROR => secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c 1354]
[Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
[Thr 2292] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
-*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
[Thr 2292] << -
End of Secude-SSL Errorstack -
[Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c 2278]
[Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 2292] =================================================
[Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c 319]
Her is my profile parameter for https.
h6*#Https parameters for Web dispatcher E:\usr\sap\WDP\W00\sec
#icm/server_port_0 = PROT=HTTPS,PORT=443$$
DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssf/name = SAPSECULIB
wdisp/ssl_encrypt = 0
icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
icm/HTTPS/verify_client=0
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/ssl_auth= 0
ms/https_port = 8400
wdisp/HTTP/use_pool_for_new_conn=1
wdisp/HTTPS/dest_logon_group = HTTPS
#wdisp/server_info_protocol = https
#wdisp/group_info_protocol = https
#wdisp/url_map_protocol = https
wdisp/ssl_ignore_host_mismatch = fals
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
Regards -
Having issues with Adobe Flash player hanging the browser
Having issues with Adobe Flash player hanging the browser.
WIN 7 enterprise 32 bit / Firefox 19.0.2 /
Internal company website keeps giving attached screen shot error, and hangs the browser when error pops up.
Steps taken:
Uninstalled Adobe Flash player with the file “uninstall_flash_player.exe”
Deleted provided directory in instructions
"Copy and paste the following and click OK.
C:\Windows\system32\Macromed\Flash
Delete all the files in this folder."
Rebooted PC and reinstalled the flash player directly from “http://www.adobe.com/support/flashplayer/downloads.html”
Re launched company website and received same error.
Repeated above steps as well as uninstalled Firefox browser. Even went so far as to remove all profile information to start fresh from all profiles on the laptop with the same results.
Note: The web page will work without the flash player plugin, and my page doesn’t hang the browser. Required to open page in FireFox per company policy.I'm sorry you're encountering this. Could you paste a few of the most recent report ID links displayed when you go to "about:crashes" in the Firefox address bar?
As for workarounds, the first thing I'd suggest is trying our 11.7 labs release which you can get here: http://labs.adobe.com/downloads/flashplayer.html
If that doesn't help, please try the troubleshooting steps outlined in this FAQ:
How do I troubleshoot Flash Player's protected mode for Firefox?
In particular, I'd recommend temporarily disabling protected mode (for troubleshooting purposes only) to see if that addresses the issue.
Thanks,
Chris -
I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?
Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy -
What is the issue with Java 7 Update 6 windows installer?
Hi guys,
I know that this is not the forum to ask Java Installation issue, but I couldn't find a forum that specifically deals with such issues. Also, as the issue in hand concerns JavaFx, I thought it appropriate to post the question here. Let me begin...
I ran the installer for JDK 7 Update 6 on my Windows 7 64-bit machine, and it installed Java successfully, but no JavaFX SDK. So I uninstalled it, and ran the installer again, and it produced the same output i.e. Java installation O.K. but no JavaFX. It also didn't show any error message.
Puzzled, I looked at the system requirements for JavaFX 2.2, and it says SP1 for Windows 7. Sure my Windows 7 is not updated to SP1 yet, but JavaFX 2.1.1 was successfully installed on it, and it had same requirement ie. SP1. Since my numerous attempts to update to Windows 7 SP1 failed, I downloaded and installed separate installer for JavaFX 2.2, which the Oracle site says is for Java 6 only. Now, I am able to compile and run JavaFX 2.2 applications on my system without any problem. It has left me puzzled because if JavaFX 2.2 is compatible with my system, then why the JDK installer for 1.0.7_06 is not able to install JavaFX?
Are other users facing the same issue?
-DineshCheck JDK folder. You should see jre/lib/jfxrt.jar there.Yes it is there. And in Netbeans IDE, I specified the JDK home folder where it asks for JavaFX SDK folder location, and it accepted it; the IDE found all the required JavaFX SDK files in that folder as it is able to compile the program without any problem.
Thanks for pointing me to the right direction. All the while I was looking for the folder named "JavaFX 2.2 SDK", and not founding one, assumed it to be some problem with the installer.
Thanks again.
-Dinesh -
I am having problems with trying to update safari and this keeps popping up, Safari can’t open the file “Safari_Updater-2.exe” because no available application can open it. Also, I have a bunch of pops and I have my pop up blocker on but I keep having pop ups.
The info below should help with your pop-up issue.
Check the links below for options to remove the Adware
Easy method: http://www.adwaremedic.com/index.php
Somewhat more difficult method: Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
And, read this article below to see how the Adware arrived on your computer.
How to install adware
The Safari update can be found at The App Store updates section. Where are you obtaining the file? -
I have a new iphone 5 and I can't pick up a wireless router that I could use with my old iphone 3GS. Is there an issue with the new iphone and is the antenna weaker than the 3GS?
Please read this :
https://discussions.apple.com/message/20053332?ac_cid=tw123456#20053332
Well I copyed it to you here.
Re: Anyone still having IOS 6 wifi issues?
created by mpa9366 in Using iPad - View the full discussion
Having done a lot of reading today and having found a very good online tablet magazine (will post link tomorrow) there seems to be a few tech bods onto the problem.
The magazine I was reading identified wifi problems within hours of the ios 6 release and have been analysing since then with almost daily updates - the story seems to be:
The apple authenthication transmission is normal, it should slip through event prior to a full handshake with the host network being completed - however if not authenthicated then apple will not permit the device to connect (kills the connection) this is designed to protect apple from counterfeiting. So thats problem 1 if you dont receive a token from apple.
Problem 2 is that ios 6 only supports ipv6 (the new ip protocol) whereas outside silicon valley a large proportion of routers modems etc are still ipv4 protocol.
So youre locked into ipv6 in a world where ipv4 devices are everywhere and apple have not allowed for the ability to handle both protocols. This is like GM telling you your car requires an upgrade, everything will improve etc and as part of the upgrade fits a fuel cell motor and stays silent when their upgraded vehicles are simply parked up because they cannot get fuel.
A very basic expectation would have been dual protocol handling - we know the HW supports ipv4 as all wad fine on ios5.
So its going to be hit and miss with networks - more hit than miss in techy areas like silicon valley, but more miss in places like where I am - a small town in rural Switzerland.
Only apple can fix this with a patch to enable ipv4 protocol handling.
There you go. you just need to buy a new router, I'm sure Apple has one for sale, cause it's not there fault for sure.
Wonder why people start to migrate to other devices ? -
Issues with wifi since updating to iOS 6 on iPad 3.
I'm having wifi issues since updating to iOS 6 on my iPad 3. I can't access certain sites and get error messages such as 'servor can't connect' and 'request timed out.' Although some sites work fine. I can't access apps which require internet such as facebook, iMessenger, face time and games which need internet access. I can't use iTunes or App store and get the message 'can't connect to iTunes try again.' All these problems started after I updated to iOS 6. I found that the iPad works fine at another location on a different wifi but not at home. The home internet is not the issue as laptops, phones and iPad 1 and 2 all work fine on the internet here. I took my iPad to the apple store with no help and no useful advice so came back again and they offered me a hardware swap which I took. I now have the new iPad but the issue still remains. I have tried everything and I have done everything that has been suggested. Some things I have done are reset network settings, reset all settings, changed wifi dns, changed HTTP proxy to auto, closed all apps and re-opened, fully shut down the iPad, turned off the wifi router and restored the iPad several times. I have searched for help and advice and found that there are many complaints about iOS 6 on the iPad 3 when it comes to wifi. What else is there for me to do to fix this problem? I can't use internet or apps that require internet, basically my iPad is of no use at the moment. Do I have to wait for a new software update which will address this problem?
Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again. -
Issue with opening PDF files from the web Acrobat 8.1.4
Hello everyone
I just found out about this problem today, and it manifests in such a manner that when you try to open a PDF document on the web, it hangs for a while, and then the standard message about Adobe Acrobat not being able to open the document comes up, and after you OK away that you get the message that the program shuts down.
If I download the PDF itself and open it locally it works. Is there any known issue with updates recently that creates this problem?
The system is running on Windows 7 32-bits, and Adobe Acrobat is a part of the CS3 Master Collection.
Greetings from AlexanderNot supported file type can (but not always) mean the PDF was created with an old enough version of Acrobat, that it isn't comaptible with reader X or XI.
Might have been damaged is pretty cut and dried in its meaning and interpretation.
There's a known issue with Mac OS and Safari Browser "breaking" PDFs as they download, but it's not so common for Windows. Since these are files you already had, it would be even less applicable.
You can try downloading an older version of Reader to check if it's a compatibility issue, but you'd have to uninstall the latest to do it and it'd be a lot of bother if they still don't open. It would also mean they are "broken" and cannot be repaired, that I know of. -
Issues with Library images updating in Captivate
Getting some update issues with the Library. This used to
work, but is now working only intermittently.
I will locate a background slide in the library, then hit
CTRL+U to open it in Photoshop. I'll make my edits in Photoshop,
then save and close the Window in Pshop. This used to bring me back
into Captivate, and I would see the correct image in the main
editing screen. However, now when I come back into Captivate, the
main editing screen will not show the edits, nor will the thumbnail
on the left side. If I pres CTRL+U to open the image back in
Photoshop, Photoshop shows the new edits, but not Captivate's
design mode. The images DO show up when I finally publish, but I
can't publish every time I need to check to see whether the edit
made it over. Also, if I select the image in the Library and click
the Update button, I get an "image cannot be updated" error
message.
What was a very nice feature is now causing mucho frustration
because it isn't working consistently.
Any thoughts? I've supposedly updated to patch 3.2, though
Captivate is only showing 3.0.1.589.
Thanks in advance.Hi Mark
...but the thing that really bugs me is that this a workaround
for functionality that is supposed to work.
I agree completely. Unfortunately, last time I checked,
Captivate was software. And well, you know. Sometimes things don't
work expected with software so we find workarounds to overcome what
fails.
At this point the best course of action is to use the
workaround since the other method is failing. Then be certain to
report the issue to Adobe via their official preferred channel.
That is the Wish Form.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick -
Issues with GoogleMail after updating to iOS 4.2.1
Hello,
yesterday I have updated my iPhone to 4.2.1.
Now I have issues with syncing my mails, calender and notes from Google.
All apps (Mail, Calender and Notes) crashed right after opening them. So I decided to create a new account on my iPhone. Therefore I deleted my existing acoount and started to configure a new one (Settings => Mail, Contacts, Calender => Add account => Google Mail). After filling the form with all necessary inputs (name, address, password and description) the app crashes.
Does anyone have a solution for this problem?
Thanks!
ChrisI just experienced the exact same thing after upgrading from iOS 4.2.x to iOS 4.3...
Now my iPad shows the picture of the white USB cable that tells me to connect to iTunes to (re)activate. After trying this nothing happens - except from a message in iTunes telling me that;
"There is a problem with your iPad.
We're sorry, the iPad you connected may be damaged and canot be activated for service. We recommend you to visit your nearest Apple Store for more information. To find your..."
Anyone else had similar exeriences?!
Maybe you are looking for
-
Using Superscript in Adobe Acrobat 9 Pro
I would like to know how to enter scientific formulae in my Adobe documents. Is there a way to suberscript exponents? The Adobe online help and built-in help are NOT easy to use and, in my opinion, useless.
-
what are the cool widgets the I could download that won't mess up with my system? are the following widgets such as istat, geoWidget, mtv and hotbox good to download? What is plasma tube? is Geowidget same as google earth?
-
who's fault is it adobe or wacom?who should fix the problem or can i fix it on my own? the wacom driver is up to date just in case u suggest that to me.
-
Is there any way at all to have the results row in a query do a subtraction instead of summation? If not how can I get a difference between two characteristics?
-
A gear error when i tried to update to 9 itunes
i have vista.. when i tried to uprade to 9itunes it completely destroyed my itunes.. when i tried to reinstall it it gave me an error saying """""""unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the ear driver set