Issues with 2010 exchange server DAG

Hello, for some reason, at some point today our monitoring alerted us that the application status is 'down' on our DAG on exchange.
In the cluster failover manager, each host had written the following log entry:
"Cluster node 'SERVERNAME' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run
the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node
is connected such as hubs, switches, or bridges."
I followed the article based on the issue
But was unable to locate the problem. A few errors we returned regarding a single point of failures on the NICs for the exchange servers, labelling them as a single point of failure, but otherwise, the exchange servers within the DAG seem OK.
I have also checked the DAG settings within Exchange Management Console to see if there is any issues within that and I can see all databases are healthy and synced, with one server having the Databases mounted which is normal behaviour. Despite all this
I am still unable to see any actual issues which could lead to why the cluster of the DAG is showing as down.
I have taken a look within the cluster management MMC and can see that there is nothing listed within the 'Cluster Core Resources', other than the clusters IP, surely there should be an application or directory listed here ?
any help or advice would be greatly appreciated.
thanks

Hi,
Do you use the Validate a Configuration Wizard to review the network configuration?
If not, please use the Validate a Configuration Wizard to review the network configuration to check result.
And please make sure the cluster service is running on these nodes.
Please check if Antivirus is running, if there is Antivirus, please disable temporarily.
Please make sure the Network Binding order should be correct.
Besides, please check the Cluster Events log to see if there is any related error message.
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

MimeMessage.reply() issue with MS Exchange Server 2007 Emails

I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
Also, if the message passes validation, positive notification is sent back to the sender.
Both processes use the method: javax.mail.Message.reply()It's coded as:
MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
javax.mail.SendFailedException: No recipient addresses
     at javax.mail.Transport.send0(Transport.java:110)
     at javax.mail.Transport.send(Transport.java:80)
     at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
     at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
     at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
MS Exchange 2003 works fine
From: [email protected]
To: [email protected]
Subject: Re: Report
In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
From: [email protected]
Subject: Re: Reports
In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
Thanks,
LaelW

When the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope     = "(" env-date SP env-subject SP env-from SP
          env-sender SP env-reply-to SP env-to SP env-cc SP
          env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing.

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Exchange server 2010 exchange server 2013 sp1 2 servers one domain

Scenario : Existing Server - Small Business Server 2011 with exchange 2010 \ Additional server on domain server 2012 r2 with exchange 2013 sp1 \ exchange 2013 sp1 installed on the second server but the exchange toolbox snap in fails, EAC login credentials
will not log on, and the shell tries to log onto the exchange 2013 with access denied error but then logs into the existing 2010 exchange server. Any suggestions on how to get these two installs of exchange to play nicely? reasoning is to eventually migrate
everything over to the new exchange.

Hi,
Based on my experience, here are some troubleshooting:
1. Check if all your Exchange 2013 services are working properly.
2. Check if the login account is a member of Exchange management group. You can try another admin account.
3. Check your event log and find if there is any error.
Thanks,
Angela Shi
TechNet Community Support

Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features

Hi All
We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
Kind Regards
Please note that I have previously posted this in another forum but was advised to post here in this forum.

Hi,
I find your post on Office forum:
http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
About "And are they dependent on the Office Service Pack?", I will give the answer.
Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
If you want to know more about the Exchange new features, please see Exchange Team Blog.
Find blog about SP1 for your reference:
http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Crashing when opening mail with attachments (exchange server)

Hi,
I have a user using Mac OS X Mail with an Exchange Server. OS X Mail crashes when she opens an email with an attachment. Though it doesn't happen all the time, when it does crash there is an attachment with the email.
Crash report below:
Date/Time: 2007-04-30 10:26:35.635 -0700
OS Version: 10.4.9 (Build 8P2137)
Report Version: 4
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Parent: WindowServer [58]
Version: 2.1.1 (752.3)
Build Version: 1
Project Name: MailViewer
Source Version: 7520300
PID: 415
Thread: 10
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0:
0 libSystem.B.dylib 0x9000a457 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082c2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082bace CFRunLoopRunInMode + 61
3 com.apple.HIToolbox 0x92ddc8d8 RunCurrentEventLoopInMode + 285
4 com.apple.HIToolbox 0x92ddbfe2 ReceiveNextEventCommon + 385
5 com.apple.HIToolbox 0x92ddbe39 BlockUntilNextEventMatchingListInMode + 81
6 com.apple.AppKit 0x93262465 _DPSNextEvent + 572
7 com.apple.AppKit 0x93262056 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 137
8 com.apple.AppKit 0x9325bddb -[NSApplication run] + 512
9 com.apple.AppKit 0x9324fd2f NSApplicationMain + 573
10 com.apple.mail 0x00094df2 0x1000 + 605682
11 com.apple.mail 0x00094d19 0x1000 + 605465
Thread 1:
0 libSystem.B.dylib 0x9000a457 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082c2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082bace CFRunLoopRunInMode + 61
3 com.apple.Foundation 0x92823d3a -[NSRunLoop runMode:beforeDate:] + 182
4 com.apple.Foundation 0x92823c36 -[NSRunLoop run] + 75
5 com.apple.MessageFramework 0x9949e5af +[_NSSocket _runIOThread] + 97
6 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
7 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 2:
0 libSystem.B.dylib 0x9001a93c select + 12
1 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 3:
0 libSystem.B.dylib 0x90025027 semaphorewait_signaltrap + 7
1 com.apple.Foundation 0x9284426c -[NSConditionLock lockWhenCondition:] + 39
2 com.apple.AppKit 0x93339270 -[NSUIHeartBeat _heartBeatThread:] + 377
3 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
4 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 4:
0 libSystem.B.dylib 0x9000a457 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082c2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082bace CFRunLoopRunInMode + 61
3 com.apple.Foundation 0x92823a0f +[NSURLConnection(NSURLConnectionInternal) _resourceLoadLoop:] + 259
4 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
5 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 5:
0 libSystem.B.dylib 0x9000a457 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082c2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082bace CFRunLoopRunInMode + 61
3 com.apple.Foundation 0x9284abc2 +[NSURLCache _diskCacheSyncLoop:] + 206
4 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
5 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 6:
0 libSystem.B.dylib 0x9000a457 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082c2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082bace CFRunLoopRunInMode + 61
3 com.apple.Foundation 0x92823d3a -[NSRunLoop runMode:beforeDate:] + 182
4 com.apple.Foundation 0x92823c36 -[NSRunLoop run] + 75
5 com.apple.WebKit 0x94cbb529 +[WebFileDatabase _syncLoop:] + 198
6 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
7 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 7:
0 libSystem.B.dylib 0x90049617 semaphoretimedwait_signaltrap + 7
1 com.apple.Foundation 0x9288cd30 FCONDITION_WAITTIMEOUT + 128
2 com.apple.Foundation 0x9288cc7a -[NSConditionLock lockWhenCondition:beforeDate:] + 101
3 com.apple.MessageFramework 0x99499821 -[InvocationQueue _drainQueue] + 210
4 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
5 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 8:
0 libSystem.B.dylib 0x90049617 semaphoretimedwait_signaltrap + 7
1 com.apple.Foundation 0x9288cd30 FCONDITION_WAITTIMEOUT + 128
2 com.apple.Foundation 0x9288cc7a -[NSConditionLock lockWhenCondition:beforeDate:] + 101
3 com.apple.MessageFramework 0x99499821 -[InvocationQueue _drainQueue] + 210
4 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
5 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 9:
0 libSystem.B.dylib 0x90049617 semaphoretimedwait_signaltrap + 7
1 com.apple.Foundation 0x9288cd30 FCONDITION_WAITTIMEOUT + 128
2 com.apple.Foundation 0x9288cc7a -[NSConditionLock lockWhenCondition:beforeDate:] + 101
3 com.apple.MessageFramework 0x99499821 -[InvocationQueue _drainQueue] + 210
4 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
5 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 10 Crashed:
0 libobjc.A.dylib 0x90a57387 objc_msgSend + 23
1 com.apple.MessageFramework 0x99499993 -[InvocationQueue _drainQueue] + 580
2 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
3 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 11:
0 libSystem.B.dylib 0x90049617 semaphoretimedwait_signaltrap + 7
1 ...apple.AddressBook.framework 0x9475e646 -[ABRemoteImageLoader workLoop] + 158
2 com.apple.Foundation 0x927ee2e0 forkThreadForFunction + 123
3 libSystem.B.dylib 0x90024987 pthreadbody + 84
Thread 10 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x927d26ce ecx: 0x90abdfd0 edx: 0x00000177
edi: 0x00000008 esi: 0xb0230e38 ebp: 0xb0230ec8 esp: 0xb0230e04
ss: 0x0000001f efl: 0x00010206 eip: 0x90a57387 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Binary Images Description:
0x1000 - 0x1b2fff com.apple.mail 2.1.1 (752.3) /Applications/Mail.app/Contents/MacOS/Mail
0x14d97000 - 0x14d98fff com.apple.textencoding.unicode 2.1 /System/Library/TextEncodings/Unicode Encodings.bundle/Contents/MacOS/Unicode Encodings
0x14df7000 - 0x14df7fff com.apple.SpotLightCM 1.0 (121.36) /System/Library/Contextual Menu Items/SpotlightCM.plugin/Contents/MacOS/SpotlightCM
0x15048000 - 0x1505dfff com.apple.Mail.Syncer 1.1.1 (752.3) /System/Library/Frameworks/Message.framework/Versions/B/Resources/Syncer.syncsc hema/Contents/MacOS/Syncer
0x15206000 - 0x15208fff com.apple.AutomatorCMM 1.0.1 (68) /System/Library/Contextual Menu Items/AutomatorCMM.plugin/Contents/MacOS/AutomatorCMM
0x15225000 - 0x15229fff com.apple.FolderActionsMenu 1.3.1 /System/Library/Contextual Menu Items/FolderActionsMenu.plugin/Contents/MacOS/FolderActionsMenu
0x1522e000 - 0x1522ffff com.symantec.NAVCMPlugIn 10.1 (003) /Library/Contextual Menu Items/NAVCMPlugIn.plugin/Contents/MacOS/NAVCMPlugIn
0x8fe00000 - 0x8fe4afff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x90170fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x901c0000 - 0x901c2fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x901c4000 - 0x90201fff com.apple.CoreText 1.1.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x90228000 - 0x902fefff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x9031e000 - 0x90773fff com.apple.CoreGraphics 1.258.61 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x9080a000 - 0x908d2fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x90910000 - 0x90910fff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x90912000 - 0x90a05fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a55000 - 0x90ad4fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90afd000 - 0x90b61fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
0x90bd0000 - 0x90bd7fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90bdc000 - 0x90c4ffff com.apple.framework.IOKit 1.4.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c64000 - 0x90c76fff libauto.dylib /usr/lib/libauto.dylib
0x90c7c000 - 0x90f22fff com.apple.CoreServices.CarbonCore 682.21 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x90f65000 - 0x90fcdfff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x91005000 - 0x91043fff com.apple.CFNetwork 129.20 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x91056000 - 0x91066fff com.apple.WebServices 1.1.3 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
0x91071000 - 0x910effff com.apple.SearchKit 1.0.5 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x91124000 - 0x91142fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x9114e000 - 0x9115cfff libz.1.dylib /usr/lib/libz.1.dylib
0x9115f000 - 0x912fefff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
0x913fc000 - 0x91404fff com.apple.DiskArbitration 2.1.1 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x9140b000 - 0x91412fff libbsm.dylib /usr/lib/libbsm.dylib
0x91416000 - 0x9143cfff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x9144e000 - 0x914c7fff com.apple.audio.CoreAudio 3.0.4 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x91515000 - 0x91515fff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x91517000 - 0x91542fff com.apple.AE 314 (313) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
0x91555000 - 0x91629fff com.apple.ColorSync 4.4.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x91664000 - 0x916e1fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x9170e000 - 0x917b7fff com.apple.QD 3.10.24 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x917dd000 - 0x91828fff com.apple.HIServices 1.5.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x91847000 - 0x9185dfff com.apple.LangAnalysis 1.6.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x91869000 - 0x91883fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
0x9188d000 - 0x918cafff com.apple.LaunchServices 182 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
0x918de000 - 0x918eafff com.apple.speech.synthesis.framework 3.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x918f1000 - 0x91930fff com.apple.ImageIO.framework 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x91943000 - 0x919f5fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
0x91a3b000 - 0x91a51fff libcups.2.dylib /usr/lib/libcups.2.dylib
0x91a56000 - 0x91a74fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x91a79000 - 0x91ad8fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x91aea000 - 0x91aeefff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x91af0000 - 0x91b74fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
0x91b78000 - 0x91bb5fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x91bbb000 - 0x91bd5fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x91bda000 - 0x91bdcfff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x91bde000 - 0x91cbcfff libxml2.2.dylib /usr/lib/libxml2.2.dylib
0x91cd9000 - 0x91cd9fff com.apple.Accelerate 1.3.1 (Accelerate 1.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x91cdb000 - 0x91d69fff com.apple.vImage 2.5 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x91d70000 - 0x91d70fff com.apple.Accelerate.vecLib 3.3.1 (vecLib 3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x91d72000 - 0x91dcbfff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x91dd4000 - 0x91df8fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x91e00000 - 0x92209fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x92243000 - 0x925f7fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x92624000 - 0x92711fff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x92713000 - 0x92790fff com.apple.DesktopServices 1.3.6 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x927d1000 - 0x92a01fff com.apple.Foundation 6.4.8 (567.29) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92b1b000 - 0x92b32fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x92b3d000 - 0x92b95fff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x92ba9000 - 0x92ba9fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x92bab000 - 0x92bbbfff com.apple.ImageCapture 3.0.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x92bc9000 - 0x92bd1fff com.apple.speech.recognition.framework 3.6 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x92bd7000 - 0x92bdcfff com.apple.securityhi 2.0.1 (24742) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x92be2000 - 0x92c73fff com.apple.ink.framework 101.2.1 (71) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x92c87000 - 0x92c8afff com.apple.help 1.0.3 (32.1) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x92c8d000 - 0x92caafff com.apple.openscripting 1.2.5 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x92cba000 - 0x92cc0fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x92cc6000 - 0x92d29fff com.apple.htmlrendering 66.1 (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
0x92d4d000 - 0x92d8efff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
0x92db5000 - 0x92dc2fff com.apple.audio.SoundManager 3.9.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
0x92dc9000 - 0x92dcefff com.apple.CommonPanels 1.2.3 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x92dd3000 - 0x930c8fff com.apple.HIToolbox 1.4.9 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x931ce000 - 0x931d9fff com.apple.opengl 1.4.16 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x931de000 - 0x931f9fff com.apple.DirectoryService.Framework 3.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x93249000 - 0x93249fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x9324b000 - 0x93901fff com.apple.AppKit 6.4.8 (824.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x93c82000 - 0x93cfdfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x93d36000 - 0x93df0fff com.apple.audio.toolbox.AudioToolbox 1.4.5 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x93e33000 - 0x93e33fff com.apple.audio.units.AudioUnit 1.4.2 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x93e35000 - 0x93ff6fff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x9403c000 - 0x9407dfff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
0x94085000 - 0x940bffff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x940c4000 - 0x940d5fff com.apple.CoreVideo 1.4 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x94119000 - 0x94161fff com.apple.bom 8.5 (86.3) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x941ed000 - 0x941fdfff com.apple.securityfoundation 2.2.1 (28150) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x9420a000 - 0x94247fff com.apple.securityinterface 2.2.1 (27695) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x94263000 - 0x94272fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
0x94279000 - 0x94284fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x942d0000 - 0x942eafff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x942f0000 - 0x945aefff com.apple.QuickTime 7.1.5 /System/Library/Frameworks/QuickTime.framework/QuickTime
0x94712000 - 0x9485bfff com.apple.AddressBook.framework 4.0.4 (485.1) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x948e7000 - 0x948f6fff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
0x948fd000 - 0x94926fff com.apple.LDAPFramework 1.4.2 (69.1.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x9492c000 - 0x9493bfff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
0x9493f000 - 0x94964fff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
0x94970000 - 0x9498dfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
0x94cb9000 - 0x94d4bfff com.apple.WebKit 419 /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x94da5000 - 0x94e27fff com.apple.JavaScriptCore 418.3 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
0x94e5a000 - 0x95139fff com.apple.WebCore 418.21 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x952b8000 - 0x952dbfff libxslt.1.dylib /usr/lib/libxslt.1.dylib
0x952e2000 - 0x9536afff com.apple.syncservices 2.5 (194) /System/Library/Frameworks/SyncServices.framework/Versions/A/SyncServices
0x95502000 - 0x9553afff com.apple.PDFKit 1.0.3 /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x95a57000 - 0x95a6dfff libJapaneseConverter.dylib /System/Library/CoreServices/Encodings/libJapaneseConverter.dylib
0x96468000 - 0x96468fff com.apple.vecLib 3.3.1 (vecLib 3.3.1) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x9694b000 - 0x9696dfff com.apple.speech.LatentSemanticMappingFramework 2.5 /System/Library/PrivateFrameworks/LatentSemanticMapping.framework/Versions/A/La tentSemanticMapping
0x97304000 - 0x97311fff com.apple.DMNotification 1.0.4 (37) /System/Library/PrivateFrameworks/DMNotification.framework/Versions/A/DMNotific ation
0x974a2000 - 0x97579fff com.apple.QuartzComposer 1.2.4 (32.22) /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x97602000 - 0x97602fff com.apple.quartzframework 1.0 /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x9776d000 - 0x97787fff com.apple.slideshow 1.0.4 (1.0) /System/Library/PrivateFrameworks/Slideshow.framework/Versions/A/Slideshow
0x97b06000 - 0x97b4bfff com.apple.ISSupport 1.1.2 (16) /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
0x97b70000 - 0x97b99fff com.apple.DotMacSyncManager 1.0.4 (155) /System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/DotMac SyncManager
0x97ca4000 - 0x97ce9fff com.apple.PAPICommon 2.5 (131) /System/Library/PrivateFrameworks/DotMacLegacy.framework/Versions/A/DotMacLegac y
0x99468000 - 0x99473fff com.apple.IMFramework 3.1.4 (429) /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
0x9947d000 - 0x995e9fff com.apple.MessageFramework 2.1.1 (752.3) /System/Library/Frameworks/Message.framework/Versions/B/Message
Model: MacBookPro1,1, BootROM MBP11.0055.B08, 2 processors, Intel Core Duo, 2.16 GHz, 2 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), 0.1.31.1
Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Network Service: Parallels Host-Guest, Ethernet, en2
Network Service: Parallels NAT, Ethernet, en3
Serial ATA Device: ST910021AS, 93.16 GB
Parallel ATA Device: MATSHITADVD-R UJ-857
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
Mac Book Pro Mac OS X (10.4.8)
Mac Book Pro Mac OS X (10.4.9)

Hi micmac74.
Mail crashed for no apparent reason.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with the computer:
About the Mac OS X 10.4.9 Combo Update
Mac OS X 10.4.9 Combo Update for PowerPC
Mac OS X 10.4.9 Combo Update for Intel
After installing the Combo Update, the computer may restart twice and the first restart may take several minutes. This is normal.
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Unable to open OWA cross site between 2013 and 2010 Exchange Server

Hello,
First of all allow me to describe the scenario as this always helps and is often omitted from many questions.
SITEA – 1 x 2010 Exchange Server (All roles except UM and Edge), Domain controllers etc available
SITEB- 1 x Newly installed 2013 Exchange Server (Mailbox and CAS roles), GC Domain controllers etc. avaliable
Sites and Services are correctly configured between the sites and we have a high speed WAN connection between the data centres all ports and communication between servers at both sites are open as the connection is secure.
After installing Exchange 2013 in SITEB, whenever I try to login to either the ECP or OWA of the 2013 with a user whose mailbox is in SITEA we immediately receive the sad smiley face with the something went wrong message. Clicking more details displays
the following message:
X-FEServer: <OUR_EX_2013_SERVER>
I was expecting Exchange to proxy the request to the 2010 server and get the 2010 OWA experience. If I create a new mailbox on the 2013 then it is of course fine.
Is someone able to suggest any troubleshooting steps? I have of course fully followed the Exchange 2013 deployment assistant from Microsoft and ensured all pre-requisites were carried out.
The Exchange 2013 server is SP1 and is running on Windows 2012 R2

Hi,
According to your description, your ECP and OWA requests cannot be proxyed or redirected from your Exchange 2013 to Exchange 2010 server. If I misunderstand your meaning, please feel free to let me know.
If yes, I recommend you the following troubleshooting:
1. Check all URLs of ECP and OWA virtual directory on your Exchange 2010 server.
get-owavirtualdorectory |fl *url
get-ecpvirtualdirectory |fl *url
Does your Exchange 2010 server has the same namespace with your Exchange 2013 server?
2. Check if you can ping your Exhange 2010 server on your Exchange 2013 server.
3. Check if there is any error in your event log and IIS log on the Exchange 2013 server.
Thanks,
Angela Shi
TechNet Community Support

IPhone 2.0 doesn't work with my exchange server

My tech support guys have been working on my iPhone for an entire day and couldn't get it to work with the server. They are telling me that the phone isn't compatible with the exchange server and it would require an entire overhaul of our server and reconfiguration to get it to work. I thought the new iPhone was supposed to be so easy to use. I am so ready to ditch my blackberry and so very disappointed that I can't get the iPhone to work with our server. Macintosh support was completely useless to help figure out this problem- as they said they don't offer support to third party software- yet this phone is supposed to work with the Microsoft Exchange Server?! Can anyone offer any help?
Below is the explanation my tech support gave me:
I wanted to reach out to you to update you with your iPhone working on the peacock exchange. After spending considerable time with both AT&T and Macintosh, getting the phone to operate with exchange as easy as Macintosh advertises, has ended in a failure. Your phone device itself, is properly updated and has all the correct settings. Where the problem lies for you is on the Microsoft server end. This is where the server will have to have additional software and updates installed which would effect and change the peacock network environment. This can be potentially accomplished, however it will need to be evaluated for the additional costs and potential risks to the server and environment. That’s why BlackBerry is so popular with business networks, because it does not affect the Microsoft Exchange mail services in any shape or form. Blackberry runs on its own server service which acts as the bridge to communicate with the Microsoft service.
AT&T was very helpful and tried everything they could to aid us. Macintosh on the other hand, was not very helpful. After a few unsuccessful attempts, Macintosh just came out and said that they do not support 3rd party software (i.e Microsoft Products). You can give Macintosh a try, and see if you end with better results.

wcadesign wrote:
Below is the explanation my tech support gave me:
I wanted to reach out to you to update you with your iPhone working on the peacock exchange. After spending considerable time with both AT&T and Macintosh, getting the phone to operate with exchange as easy as Macintosh advertises, has ended in a failure. Your phone device itself, is properly updated and has all the correct settings. Where the problem lies for you is on the Microsoft server end. This is where the server will have to have additional software and updates installed which would effect and change the peacock network environment. This can be potentially accomplished, however it will need to be evaluated for the additional costs and potential risks to the server and environment. That’s why BlackBerry is so popular with business networks, because it does not affect the Microsoft Exchange mail services in any shape or form. Blackberry runs on its own server service which acts as the bridge to communicate with the Microsoft service.
Actually Blackberry has two options, one where they pull from your server and then push it to your phone as described. Alternatively you can install their software on your server to relay. Both require additional services, software and fees. Instead the iPhone uses the ActiveSync included in the Exchange server, which is the same protocol used to communicate with Windows Mobile based devices.
AT&T was very helpful and tried everything they could to aid us. Macintosh on the other hand, was not very helpful. After a few unsuccessful attempts, Macintosh just came out and said that they do not support 3rd party software (i.e Microsoft Products). You can give Macintosh a try, and see if you end with better results.
Essentially Apple does not configure Microsoft Exchange for your admins. We do provide a list of what versions of ActiveSync and which ActiveSync features we support. However, ActiveSync is part of the Microsoft Exchange server maintained and configured by your Exchange server admins.
Hope this helps,
Nathan C.

Actionable emails with MS Exchange Server

Using Exchange for e-mail, and my understanding is that we must enable IMAP/POP3 email on our Exchange server to get the BPEL actionable e-mails to work. But my Exchange experts strongly advise against us turning on these types of messages, at least on our main Exchange server. It is a global setting, and apparently one which creates numerous security risks.
Attempting to configure actionable emails with MS Exchange Server as the email system. Does this require enablement of IMAP/POP3 on the Exchange Server to get actionable emails to work? Specifically, for the EmailAccount/IncomingServerSettings within the ns_emails.xml file, what configurations are required when the email system is Exchange Server?
I'm looking to confirm or deny this configuration requirement for MS Exchange Server.
Thanks,
Tim

Try http://www.lavantech.com/smtpmailer
This isnt the right place to market your product. If you've forgotten what this forum is used for, you better ask someone.
You don't have to refer users to your application and asking them to try it. Of course not for free. You will be reported if you continue.

UCM certified with Microsoft Exchange Server ??

Hi,
Is UCM certified with Microsoft Exchange Server ? how can we integrate UCM with Microsoft Exchange Server as we have Desktop Integration Suite to integrate with MS Outlook..
Thanks,
NL

As for the link to the manual, for 10g it's here (I believe for 11g it will be similar if not the same): http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/managing_system_10en.pdf
It also mentions that SMTP protocol is used. Therefore, you will need to know the SMTP address of your Exchange Server.
As for who uses it, I believe it is the majority or at least a significant part of the clients' installed base. Note that it is one of the most widespread email servers.

Using MS Outlook settings to set up Evolution with an Exchange server

I am currently using Outlook with an Exchange server, and I would like to use Evolution instead. I installed evolution and evolution-ews, and in going through the initial account setup, I am asked for a host URL and an OAB URL. I'm not sure what these are and can't find them in Outlook. Surely these paths are stored somewhere in Outlook, right?

When I used outlook before, I was able to log in through a web browser as another way to browse my mails when away from the office. The example in the link was
https://server-ip.com/exchange
which is the same as I was able to use. Of course, I am almost sure the address can be different. With my limited knowledge, I would recommend just entering your credentials in Evolution and click "Authenticate". If all goes well, you should then be prompted for your password. If you don't have that option, try to login to that address from your web browser. If not, maybe you can get in touch with IT or the server admin to see if the outlook server is setup to allow webdav and if in fact that is the correct address.
Last edited by BluMongoose (2014-09-03 19:49:57)

TS4363 Issues with the Exchange mail after upgrade to the lion x

I can access my emails of my job in my iphone 5 and in my tablet. In the pass I used to access it by my macbook pro, but after updated to the IOS X, I got issues with the Exchange in the mac.

Found the answer here: https://discussions.apple.com/thread/4138783

Does Mail (3.6) work with MS Exchange Server 2003?

I'm struggling to get Mail to work with an exchange server.
Apparently, from the company's FAQs, we can hook up an iPhone, but alas not Mail.
With the iPhone directions, they talk about a "domain" field, which doesn't show up in Mail.
Any tips or clues would be appreciated.

I'm not entirely sure why this works now, but it does. Yay!
My problem evolved such that I, when I sent out through a different outgoing server, a recipient would see the address of the outgoing address, e.g. if I was using the gmail servers it would look like [email protected], and not the [email protected]
So as a work around I tested sending out messages with my [email protected] address in the Reply To field. That works.
Strangely, a Sent mailbox with for my [email protected] has appeared. Even messages that I've sent out with nothing in the Reply To field indicate that they've come from my [email protected] address.
Keys to making it work:
• Set up the exchange address as an IMAP account (not an exchange account)
• Use the above referenced source forge tool
• Partner with the company's IT people for whatever assistance they can offer
• Use a Reply To field with the exchange, if required

How do I sync My Treo 700p with my exchange server in Outlook 2007

I am having trouble syncing my phone to Outlook ever since we installed an exchange server at the office. It appears to be syncing, but the calendar and contact items do not come over. It is as if it were still syncing to my old profile. Any help would be appreciated.
Post relates to: Treo 700p (Sprint)

VersaMail
Which type of VersaMail user are you?
I'm new to VersaMail and ...
My company uses Microsoft Outlook and supports Exchange ActiveSync
My company uses Lotus Notes
My company or personal email provider uses POP3 or IMAP
I already use VersaMail on another device and ...I want to transfer my settings to my Treo 700p smartphone
Setting up a Microsoft Exchange ActiveSync account in VersaMail
If your corporate email system uses Microsoft Exchange Server 2003, you may be able to use Microsoft Exchange ActiveSync on your device. Microsoft Exchange ActiveSync works with the Calendar, Contacts, and VersaMail applications on your device to directly download calendar events, contact information, and email messages from the server - without going through your desktop PC.
First, get this information from your IT department:
Microsoft Exchange 2003 mail server If your corporate mail system does not use this type of server, you cannot use Microsoft Exchange ActiveSync. Mail server name The name of the mail server that provides wireless access to your mail system. Some companies do not give out this information because they do not want wireless access to the system. If you cannot obtain the server name, you cannot use Microsoft Exchange ActiveSync. Proxy server Your IT department can tell you whether a proxy server is used and, if so, the name of the server. VPN requirement Some companies require a virtual private network (VPN) for accessing the server. Note: If you can't use Exchange ActiveSync because your email system doesn't meet all the requirements above, you may be able to use Good Mobile Messaging (formerly GoodLink) or Sprint PCS Business Connection instead.
If you set up VersaMail to work with Microsoft Exchange ActiveSync, Calendar and Contacts information automatically synchronizes directly with the Exchange server, along with email messages. You cannot choose to synchronize Calendar and Contacts info with Palm Desktop software or Outlook once you set up VersaMail to work with a Microsoft Exchange ActiveSync account. If you do not want to synchronize Calendar and Contacts info with the server, do not set up VersaMail to work with a Microsoft Exchange ActiveSync account.
Now you're ready to set up Exchange ActiveSync in VersaMail
On your device, press Power/End to wake up the screen, and then press Center to turn off Keyguard.
Press Applications and then select Email.
If you see the "Initial Setup" screen, select Continue to begin the setup.
Enter the basic account information:
In the Account Name field, enter a descriptive name. This can be anything you wish, such as "Work Email."
Select the Mail Service pick list, and then select Exchange ActiveSync.
Select Next.
Enter the account username and password:
Enter the username you use to access your email. In some systems, this is your Windows username (such as "John Doe"); in others, it's something else. Get this information from your IT department.,
Select the Password box, enter your email account password, and then select OK. Again, in some cases, this is your Windows password. Talk to IT about this password.
Select Next.
Enter your email address and Exchange mail server name. Select Next.
Select one of the following:
Done: Finish and go to the Inbox of the account you set up, where you can begin getting and sending email.
Advanced: Set more mail options.
Test Settings: Ping the Exchange Server and find out if your settings are correct, without downloading email yet. You'll see a message that states whether the test was successful.
Optional: If you selected Advanced ...
Select any of the following:
Port Number: By default, the port number setting is 443. You may need to change the port number if you choose not to retrieve incoming mail over a secure connection.
Use Secure Connection (SSL): By default, this box is checked, meaning you can retrieve incoming mail over a secure (Secure Sockets Layer, or SSL) connection. Uncheck the box if you do not want to receive email over an SSL connection.
Select Next.
Optional: If you selected Advanced ...
If you use a proxy server, enter the proxy server name and port number, and check the box if your server requires authentication. Check with your system administrator for this information. When you have finished, select Done.
Optional: If your system requires a VPN connection for email ...
A VPN connection enables you to log in to your corporate mail server through the company’s firewall (security layer). You need a VPN if your device and your company’s server are located on opposite sides of the firewall.
Check with your company’s server administrator to see if a VPN is required for accessing the corporate network. Your device software installation CD may contain a link to download VPN software for the device. If it does not, you need to purchase third-party VPN software. Learn more and install VPN.
Once you download or install the software, you set up a VPN connection in Preferences on your device.
After you set up a VPN, you need to connect to it in order to retrieve email messages from your corporate mail server. You must do this each time you open VersaMail to retrieve messages from the server.
Go to Applications and select Email.
Open the menus .
Select Options, and then select Connect VPN.
Enter the username and password you use to log in to the VPN.
Select OK.
Post relates to: None
Post relates to: None

Oracle HRMS Integration with Microsoft Exchange Server 2007

I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.

hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N

Issues with 2010 exchange server DAG

Similar Messages

Maybe you are looking for