Issues with a program,that exetutes SEM BPS sequence, into a Process Chain

We have a process chain with a step which launches a program. That program executes a SEM BPS sequence. To set that request into green we have a step with other program which changes the planning cube to batch.
Our two problems are:
1) We cannot check in the process chain monitor if sequence finished all right because the step always finishes ok even if the sequence falls.
2) Our SEM BPS sequence takes a long time and the process chain continues its execution without SEM BPS sequence is ended.
Thanks a lot!
Mario

I am not sure if there is a solution to this in BW 3.x or SEM BPS. But if you can model the same planning sequence in BI-IP, then you can excute it in a process chain using a process chain variant.

Similar Messages

Hi, I have an issue with a program that needs Windows Access for, it to run, any Ideas on how to make it work, the program I need to run is sbem (a building calculation software)

Hi
I have a mac book pro, I need to run a software package that requires Windows Access for it to work
The software is SBEM (A building calculation software)
Any ideas
Many Thanks

Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Community
https://discussions.apple.com/community/windows_software/boot_camp
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

Since I've installed Mountain Lion, I am having lock up issues with multiple programs. MS Outlook has crashed and I've lost all my folders. HELP?

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Is the device actually showing low memory errors?
What is really occurring?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

163; There seems to be an issue with the template that the site is using as there is a code to replace the pricing.

163;
There seems to be an issue with the template that the site is using as there is a code to replace the pricing.
<script>
// Script to extract the currency and decimals from the price
var price = "{tag_saleprice}";
var priceWithoutCurrency = price.replace( /^\D+/g, '')
var decimals = priceWithoutCurrency.substring(priceWithoutCurrency.length - 2, priceWithoutCurrency.length);
var roundedPrice = priceWithoutCurrency.substring(0, priceWithoutCurrency.length - 3);
$('.image-with-price.big span').html(roundedPrice+''+decimals+'');

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.

Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.

I have a MacBook Pro and I seem to have problems with my FaceTime. It want me to enter my apple ID, but when I do it comes up with a msg that says, "The server encountered an error processing registration. Try again later." What do I need to do?

I have a MacBook Pro and have problems using my Facetime. Last time I used it without problems. Now I am trying to use it, and it is asking that I enter my Apple ID. When doing so, it comes up with a message that says, "The server encountered an error processing registrion. Try again later." What does this mean, and how do I fix it? Thanks.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

Is there a program that converts Quicktime video files into Media Player?

Is there a program that converts Quicktime video files into Media Player video files?
Windows XP

Windows Media Player on a PC plays avi and mpg in addition to the WMV and ASF files so you can either use a Windows program that generates those files from .mov format or you can use QT Pro to convert the .mov to uncompressed avi and then use Windows Media Encoder to make WMV files. Although it may be out there no one here has mentioned a PC program that converts directly from .mov format to WMV. There is a program for Mac OS that does it and I believe that company is working on a version for Intel Macs so it wouldn't be much of a stretch for them to port it to Windows.

How to delete program that not want to go into the trash?

Hi!
Just installed a program from internet, vlc video program.
I can't remove it into the trash, how could i uninstall it from my mac when it not work like other programs that could just be drag into the trash to delete?
Thanks for reply

Hi and thanks for reply.
Im unsure to how i should do this to not make any damage like Linc Davis talking about.
The program is locked, and it will not fit to the trash, the same thing happen if you example try to put the calculator in the trash, it just flip back.
The program i want do remove is Videolan, called vld. Downloaded from here: http://www.videolan.org
Thanks for the support i get

Issue with ABAP program execution from process chains

Hi All:
We have a process chain with 3 steps, each of them executing the same program with three different variants. The program is ftp's the file from APO's dataexchange (mount) to another ftp server. The first variant transfers file A to a directory in the external ftp server (say /X) . The second and the third variants are supposed to transfer different files, B and C to the same directory.
That is where the problem is. After the process chain is successful, I see two files B and C but the contents are same and that of C. So, if I switch the steps in the PC to bring in A then C and then B, I see files B and C with content of C. I tried C then A then B. I see the file names correct but now the contents are A, A then B.
Have any of you come across this issue? Do you know that these is an existing problem? IF you have a solution, pl. let me know.
Thanks
Narayanan

Narayanan,
Instead of doing it in three steps - would it be possible for you to have one UNIX script or equivalent doing the above and calling the same from your process chain ...?
We do a lot of FTPs but then our file names are standard and we have a UNIX script for the same executed using a system command through a process chain and it has been working without issues for the past 1 year ...
Maybe I have not got your situation properly ... some more detail on the program details and what you are doing in more detail would help.... also SP levels please..

Mumble issues with 32bit program.

When I try to start mumble overlay on a 32bit program I get the following issue.
$ mumble-overlay steam
set
set
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object '/usr/lib32/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
STEAM_RUNTIME is disabled automatically on arch
ERROR: ld.so: object '/usr/lib64/mumble/libmumble.so.1' from LD_PRELOAD cannot be preloaded: ignored.
But
$ file '/usr/lib32/mumble/libmumble.so.1'
/usr/lib32/mumble/libmumble.so.1: symbolic link to `libmumble.so.1.2.3'
$ file '/usr/lib32/mumble/libmumble.so.1.2.3'
/usr/lib32/mumble/libmumble.so.1.2.3: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, BuildID[sha1]=0x889382ced7f4e9fcd7a210632ec815238e9450cf, not stripped
I have mumble and lib32-libmumble (from the AUR) installed. I don't know why it isn't working. If anyone has any advise it would be appreciated.

I am not sure if there is a solution to this in BW 3.x or SEM BPS. But if you can model the same planning sequence in BI-IP, then you can excute it in a process chain using a process chain variant.

Issue with BDC program used for FBZ5 (Check Print)

Hi all,
I am having one requirement in Check printing. as per that i have made one Z program which will accept multiple Payment documents. I am passing selected accounting documents to BDC routine for Transaction FBZ5. (As in FBZ5 we can take a print for one Payment document not for multiple)
We can have 3 scenarios in FBZ5
1. Fresh Check printing (First time check printing)
2. Old Check (printing for same Check no)
3. New Check (After voiding older check)
Category 1 and 2 are working fine but i am facing problem in category 3.
For Category 3 : BDC Screen flow is like this
A. Tcode FBZ5 Start program: SAPMFCHK Screen: 750 --> Click on 'Print'
B. Program: SAPLSPO2 Screen: 0100 --> Here specify option 'New Check'
C. Program: SAPMFCHK Screen: 0700
    - This program belongs to new Tcode FCH7
    - Here we have to give Void Reason code
Now issue with Category 3:
While executing BDC in online and background mode my control is terminating at step C mentioned above
Troubleshooting:
I have debugged standard program of FBZ5
1. in Include MFCHKFD0 we can see call to Tcode FCH7 (PERFORM AUFRUF_FCH7.)
2. in form AUFRUF_FCH7 i found code related to BDC
   also there one statement is getting triggered -->   CALL TRANSACTION 'FCH7' USING BDC MODE 'A'.
So there is a BDC call inside my Z BDC program, so is this a reason why my program is not working for above scenario ?
Or can't we handle above scenario in a way mentioned above?

Hi Sandra,
I was trying to upload customer master in fd01 using bdc. The screens were different while recording. So could not perform the upload. Thenone screen was skipped so that the bdc was working fine and the data was uploaded.
This is the flow of the recording.
'SAPMF02D' '0105'.
SAPMF02D' '7105'
SAPMF02D' '0111
SAPMF02D' '0120
SAPMF02D' '0130
SAPMF02D' '0210
SAPMF02D' '0215
SAPMF02D' '0220'
SAPMF02D' '0230'
SAPMF02D' '0610
After the second screen was deleted the bdc worked fine.

Having a few issues with several programs (tor / mpd / ccm..)

Hey everybody,
I'll arrange this post in 3 parts since I have 3 different kinds of "major" problems or questions .
1st ( tor - privoxy - polipo - iptables )
I somehow found this article in your wiki and therefore tried to get tor and privoxy up and running on my desktop machine, as this didn't work as I hoped it would I searched farther in the wiki and installed and configured (as far as I've thought of) polipo and iptables.
Now I've put all 4 of them in my rc.conf, but somehow some of my http connections don't seem to work in chromium while iptables is running (https works fine though [e.g. archwiki works, youtube doesn't]).
I did everything as suggested in the polipo wiki entry, meaning I changed my /etc/iptables/iptables.rules to
*nat
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A OUTPUT -p tcp --dport 80 -m owner --uid-owner polipo -j ACCEPT
-A OUTPUT -p tcp --dport 80 -j REDIRECT --to-ports 8123
COMMIT
and removed all proxy settings from my browser - meaning all corresponding flags in the startcommand. I also added "forward / localhost:8123" to the privoxy config and changed the polipo configuration according to the wiki in order to work with tor (the socksParentProxy, socksProxyType part).
now the next problem - that might probably be related to the first - is that my privoxy doesn't load in daemon mode anymore.
I think it's since I've installed polipo that privoxy began to refuse starting together with the other daemons
[usR@machine ~]$ privoxy
Apr 23 00:20:56.459 b75086c0 Fatal error: can't check configuration file '/home/usR/config': No such file or directory
this is the output I get when I try to start privoxy in normal user mode from the terminal, when I try starting the daemon manually (/etc/rc.d/privoxy start) it says
touch: cannot touch `/var/log/privoxy/logfile': Permission denied
chgrp: cannot access `/var/log/privoxy/logfile': Permission denied
chmod: cannot access `/var/log/privoxy/logfile': Permission denied
touch: cannot touch `/var/log/privoxy/jarfile': Permission denied
chgrp: cannot access `/var/log/privoxy/jarfile': Permission denied
chmod: cannot access `/var/log/privoxy/jarfile': Permission denied
Apr 23 00:22:34.490 b76396c0 Fatal error: Cannot setgid(): Insufficient permissions.
[/var/log/privoxy belongs to privoxy:adm]
when I do the same in sudo mode it just fails without displaying an error message..
I added this code to the /etc/rc.d/privoxy executable but I still get this owner conflict error and I have no idea what might be causing it.
if [ ! -d /var/log/privoxy ]
then
mkdir /var/log/privoxy
touch /var/log/privoxy/errorfile
touch /var/log/privoxy/logfile
chown -R privoxy:adm /var/log/privoxy
fi
If the order of the daemons in rc.conf is of any real importance here a copy of my setup
( @polipo @privoxy @syslog-ng !set-hw-addr !iptables @network netfs hddtemp @crond hal dbus @alsa @slim @tor )
2nd ( mpd & mpc )
I'm just wondering if there's a way to output the position of a track in the current playlist combined with a search. since mpc search <type> <query> only prints out full file path and name, but not the position in the playlist so that you could play it with mpc play. I thought of a method to print out the whole list with mpc playlist and pipe this output into a listing program, than grep out the song I'm looking for all that in a little bash script, to replace mpc search.
Is there an integrated mpc search function that works the way I imageine it and my idea therefore redundant, or if not, is it realizable the way I picture it; does such a listing program exist?
3rd ( cairo-compmgr )
Since I'm already posting here I thought I'd mention my older problem which I still couldn't solve.
1st) I need to start cairo-compmgr(-git) in sudo mode to be able to edit any settings or activate the gui in any way. how do I automatically start the program on startup in sudo mode? I tried editing ~/.fluxbox/startup & ~/.fluxbox/init, even tried adding it in /etc/rc.d/ and /etc/rc.conf in order to start it as a daemon (lol, noob) but none of that worked properly obviously Any ideas? I don't want to start it manually and "waste" a terminal window for that every time I boot.
2nd) I can change opacity (transparency) in both versions only per hotkey, and when I do so the settings don't get saved, they even get reset to normal opacity as soon as another window gets selected. does anybody know if there's a config file or any way to save opacity settings for certain windows & programs, so that they automatically get loaded when cairo starts and stay applied until it gets closed?
[or generally: how do I configure the Plugins? ]
the last "problem" which occurs only with cairo-compmgr-git:
When I rightclick the ccm icon in the task bar and disable the composite desktop, the whole program kills itself oO
In the old version the option "Composite desktop"'s box just got un-checked and I could easily restart ccm by rightclicking the logo again and re-enabling the "Composite desktop" option.
Any clues on that by any chance?
I'm using Fluxbox by the way, if that's of any importance for any of the problems. hope I didn't forget any important information if so please remind me
Would be thankful for any kind of help
have a nice weekend
deF
//edit:
concernig the tor / privoxy problem, I managed getting all the daemons to start up at bootup again, my iptables situation remains the same though.
I went through all the config files again and played around with chown and chmod a little and for now the system is stable, everytime I reboot all the daemons start without any problems.
but when i start chromium with --proxy-server=localhost:8118 now, I get the following error message
The following error occurred while trying to access http://torcheck.xenobite.eu/index.php?:
504 Connect to torcheck.xenobite.eu:80 failed: SOCKS error: network unreachable
Generated Sat, 23 Apr 2011 04:49:08 CEST by Polipo on archzor.localdomain:8118.
notably with all programs running now, tor, polipo, privoxy (and by now dansguardian as well)..
I'm tired so I'll go asleep now, maybe I'll find something tomorrow in the logfiles or whatever, so far:
every kind of help is still very appreciated
²
/var/log/polipo/polipo.log
Disabling disk cache: No such file or directory
Couldn't bind: Address already in use
Couldn't establish listening socket: Address already in use
Couldn't bind: Address already in use
Last edited by deF291 (2011-04-23 03:13:48)

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

Issues with a program,that exetutes SEM BPS sequence, into a Process Chain

Similar Messages

Maybe you are looking for