Issues with BAT tool on UCM version 7.1.5.31900-3

Has anyone used the bulk add tool in UCM and tried to add a phone/user and received the error "too recently changed pin for pin and too recently changed credential for password"?

Hi Dmitry,
You can see this error when combining the 2 files and not following
the naming conventions;
Procedure
Step 1 Ensure that you have completed the "Installing the Unrestricted COP File" section.
Step 2 From the Software Download page on Cisco.com, download the two UCSInstall files.
Step 3 To combine the two files, execute one of the following commands.
Note Because the UCSInstall_UCOS_UNRST_7.1.5.31900-3 build specifies a nonbootable ISO, the build proves useful only for upgrades. You cannot use this build for new installations.
a. If you have a Unix/Linux system, copy and paste the following command into the CLI:
cat UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part1of2 UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part2of2 > UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso
b. If you have a Windows system, copy and paste the following command into the command prompt (cmd.exe):
COPY /B UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part1of2+UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part2of2 UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso
Step 4 Use an md5sum utility to verify that the MD5 sum of the final file is correct.
for the Unrestriced version:
•UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part1of2
•UCSInstall_UCOS_UNRST_7.1.5.31900-3.sgn.iso_part2of2
The MD5 for the Unrestricted combined download is: 4b53a2b676f9db562c4064a2cbc32095
http://www.cisco.com/web/software/282074295/36574/cucm-readme-715bsu2-2.pdf
Cheers!
Rob
"Celebration it's around us, every nations, all around us.
Singin' forever young, singin' songs underneath that sun" - K'naan

Similar Messages

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

PS CS6 issue with crop tool: graphic glitches

I am using Photoshop CS6 v13.1.2 and I'm experiencing an issue with the crop tool. Whenever I use the crop tool, move the frame around and then zoom in on the image, the image becomes noisy, pixelated or has other 'graphic glitches'. I changed the PS preferences to not use the GPU and then rebooted the computer. Still the same issue without the GPU.
Running on Mac OS 10.8.3, iMac 2011 with AMD Radeon HD 6970M.
Is there another workaround to use this tool until it might get fixed? Thank you.

I've seen the same issue from time to time on windows 13.01.1 usually only on rather large pixel dimension documents.
Does it make a difference if you flatten the image before using the crop tool?
Also, using the classic mode for the crop tool doesn't seem to have that glitch.

Licensing issues with altered tools.jar

Hello,
I wanted to know, if it would be permitted if I would ship an edited tools.jar with my application.
I would not charge my customer for the original Java-source code, I would also include the license-files that come along with the tools.jar and I would even make the affected code available publicly. Would that be enough or is it simply prohibited?

Hi,
Note that your version of Ubuntu is beta and we don't support beta software. This means that even if the problem exists and is reproducible we would wait for the open source team to release a production version.
Frank

Issues with selection tools using PS CS6

OK, I'm having issues with selections in Photoshop CC… This video shows my issue (which I never had with CS3). Basically, I go to select an area within an image, and then the selection area disappears, and when I go to move the selection area I am unable to get the selection to "drop". This happens regardless of whether I'm using my wacom tablet or my trackpad. My mac is a 2009 macbook pro running 10.8.5. Updated my OS and wacom tablet with the latest drivers. I've gone into preferences and disabled the GPU, but to not avail. Haven't run into this issue at work using CS6 (but i'm on a windows box there) Any ideas? Any help would be greatly appreciated ;-) http://www.youtube.com/watch?v=FGPla7V9QI8

say, SAKNR is 10 character field and ur appending only 6 characters, then it will give such type of errors normally.
before inserting the data to ur Z table use function module... CONVERSION_EXIT_ALPHA_INPUT

Issues With Move Tool on Elements 12

I have elements 12 on my windows 7 laptop. my problem is I open up a new project and open up any image or photoshop file to drag it over to add it to my project but the image does not transfer to the other project tab, it stays in the original tab. I can easily do it with elements 11 but I've had elements 12 since it came out and it's been a really frustrating problem as I want to be able to use elements 12 now instead. I've tried using holding down the control button and have tried looking around for this issue but so far I haven't seen anyone with this issue with a windows laptop, just Macs, please help!

Originally Posted by sarsippius
I had to move a user from one PO to another. The user opened their Groupwise only to find that all messages are gone. The folder structure is there, but no emails. The user database is still on the old server, and about 80% on the new server.
I was able to look under Move Status, and it says 'Retry mailbox item retrieval.
Any help would be greatly appreciated!
There should be different options available in the user move status for that user, including the option to retry the entire move from the start. In many cases this is recoverable by retrying the move. Other options are possible if this fails.
Before doing so, have a read through Tommy's cool solution & the Novell documentation (if not already done so) on the details of the move.
! Also make sure you have set both POA's to verbose logging so you can monitor the move messages from the sending as well as receiving end.
A detailed article on moving users in GroupWise Communities ARTICLE: User Move Within GroupWise
(looking at section 6.2 and on there are some tips/suggestions on how to handle stuck moves - reading the whole article will give a good overview and handle)
Extra info:
Novell docs on the move process (and preparations): Novell GroupWise 8 Documentation
GroupWise Wiki with additional info : Moving GroupWise Users - CoolSolutionsWiki
Hope that helps,
Willem

Issue with Adobe PDF Ifilter Extension version 11

Dear Friends
Come across few issues while determining correct version of Adobe PDF Ifilter Extension
In my local laptop I installed Ifilter extension 9.0 but unfortunately this version is no longer available for further download.
Latest version is 11.0 and I downloaded from below link.
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Just for verification, I uninstalled old version(9.0) and installed the above version(11.0) but going forth PDF indexing stopped working.
I have a requirement of PDF file content search and using Lucene.Net for this purpose. Lucene indexer that I have written is reading PDF content using PDF filter extension.
I noticed above code stopped working for any site hosted on IIS. However console,desktop and IIS express applications are working fine.
For further verification, I installed the same component in another laptop also but ended with same experience.
Please provide some input.
Regards Paul

Hi Bibhas,
Please configure iFilter as mentioned in the doc: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Acrobat_Reader_IFilter_config uration.pdf
Regards,
Rave

Issue with CE 7.2 Trial version Installation

Hi Friends,
I was installing the trial version of CE 7.2 where the installation went smoothly until it reached the step "Install Java engine".
I am running the installation using a desktop user with admin rights.
Here is a brief information about the error,
ERROR 2010-05-25 19:02:36.867 [sixxcstepexecute.cpp:988]
FCO-00011 The step startJava with step key NW_CI_Instance_StartJava -> startJava was executed with status ERROR
telnetPort:0
name:server0
pid:4052
type:J2EE Server
restart:Yes
exitCode:1 (Forced shutdown case)
state:J2EE_STOPPING
statetext:Collecting data
startTime:2010 05 25 19:02:31
elapsedTime:0:00:05
restartCount:0
errorCount:1
cpu:0:00:00
debug:Switched off
TRACE      2010-05-25 19:02:36.820
NWDIState._assertJavaProcessStateProgress() done
TRACE      2010-05-25 19:02:36.820
NWDIState._assertJavaProcessStatesProgress() done
TRACE      2010-05-25 19:02:36.820
NWException thrown: nw.progress.startupProcessFailedError:
Java process server0 of instance CE1/J00 increased error count to 1. Giving up.
Any idea how to get going.
Thanks,
Suresh

Simon,
I did a few things that solved my problem. However there could be a bunch of reason for you to get this error
For ex, Operating System Collector error or problem with the paging etc.
Can you elaborate your problem with the following details:
1. Your observations of the errors through the SAP Management Console
2. Your machine OS and RAM details.
3. Are you going in for a fresh installations? or did you uninstall CE before?
May be I can help if you are facing the same issues, I did.
Regards,
Keerti

Issue with Adobe Acrobat Pro XI Version 11.1.10

Using Adobe Acrobat Pro XI version 11.1.10 when I try to delete a page I get an error message, "one or more pages are in use and cannot be deleted". I would like to delete the pages?

Hi Frank,
This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
Does this issue occur with that specific pdf or with other pdfs too?
How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
Regards,
Rahul

Issues with Rectangle tool

Hello,
I am having an issue. I have created three pie chart grahics with some text and boxes. Everything was created in Muse, except for the three piecharts, which are PNGs. I created a colored box (using the rectangle tool) and placed it behind the content. When I view as a preview (as well as preview in browser), two of the graphics look fine but the first one, is a couple of pixles shorter in height. I am attaching a screen shot of the MUSE workspace and the preview screen shot for comparrison. Each on of the green rectangle "containers" should be 600 px in height, but when I inspect the element in the broswer, the first "container"'s height is 594px and the other two "containers" heights are 599px each. How is it possible for the first "container" to lose 6px in height and the other two to lose a px each in height?
Can someone please help me with this? As a designer with little coding knowlege, I really love the potential of MUSE, but it's these little "quirks" that eat of my time and really aren't cost effective to my project budgets and timelines.
Message was edited by: kmonk9000

The exact issue and ways getting over it is detailed in the video here - http://www.screencast.com/t/ao3syjgXa.
Thanks,
Vinayak

Issue with Clone Tool and Adjustment Brush in LR5.3

If I export a .TIFF from LR5.3 in which I've used the Clone Tool or Adjustment Brush Tool and then load the .TIFF up in Photoshop CS2 to perform further edits, I can't save the file to a .JPG - I get a '...program error...' message during the save. If I turn off the tool and export the file from LR5 again, I can do the edits in Photoshop and save it as a .jpg. The same thing will happen in Capture NX2 trying to save the LR5 exported .TIFF to .JPG. Has anyone else experienced this and are there any workarounds?

***UPDATE*** 3/7/14
Apparently no one has experienced the issue as I posted above, but in case anyone is interested, I have discovered a workaround. For some reason, the issue manifests itself when I export the TIFF with the option 'Metadata - Include All Metadata'. If I change the Metadata option to the 'Copyright Only' or 'Copyright & Contact Info Only' I am able to open the TIFF in Photoshop, make edits as needed, and then save as a JPG. Apparently LR5 is doing something weird with the Metadata file header that Photoshop and Capture NX2 doesn't like under certain circumstances.

Iphone syncing issues with PC - wanting 11.1 version of iTunes or better. Downloaded but it still fails.

Are people having syncing problems with iPhones ios 7 with itunes? I am getting a message insisting that I need to download iTunes 11.1 or better for the backup and sync to work. Having downloaded 11. it still doesn't work. Anyone else having that problem?

Okay, iTunes 11 (which version?) has been downloaded, but was it installed?
Downloading and installing are not the same thing.
What version of iTunes is actually installed on the computer?

SPAU issues with: Without Modification Assistant: No versions found

Hi,
We have upgraded from SAP 4.7 to SAP ECC 6 with Unicode.
After the upgradation we have started working with SPAU objects.
Currently I am working on SPAU: Without Modification Assistant.
I have gone though some docs in those they have asked to compare the versions using Version Management options.
But when I am tiring to check the Version Management for many of the objects I am getting the message: No versions found
Some of the objects are for which I am getting the message No versions found are as follows :
Selection Views :     SAPBRFSTANDARD                 100789       23.12.2010 ABCK900506
Programs :RM06BF00                       Collective Release of Purchase Requisitions
Transactions          FEBA                 A_1234     13.07.2006 XYZK906487           Postprocess Electronic Bank Statmt
Transaction Variants          O4_TIGER1                      D_ABCD      18.06.2005 AB5K901250
Screen Variants           O4_TIGER1_0999                 D_ABC      18.06.2005 AB5K901250
Message Classes    38                   General Basis: ABAP Runtime Environment
Maintenance and Transport Objects          J_1IEWT_ACKNS                  D_ABCDE 27.06.2008 ABC3910542
Request you to check and let us know how to proceed.
Thanks and Regards,
Prem.
<personal information removed by moderator>
Edited by: Thomas Zloch on Jan 18, 2011 12:43 PM

Hi,
in SPAU you will be getting three things..
1>Green light 2>yellow light and 3>Red light
when the upgrade takes place if you see any object under Green that means the changes are automatically carried to the new version from older version
for yellow it has done partially and for red you need to do manually copying the code to the new version.
You have an option is "RESET to original" if you do this , the code will be reset to what SAP provided in the new version. Your old code won't be there.
Please go through the below link to understand about SPAU and SPDD.
http://help.sap.com/saphelp_nw04s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
Regards,
Nagaraj

Is anyone having issues with installing the 32 bit version of Adobe Presenter?

I am trying to install the 32 bit version of Presenter on my computer from the downloaded file on the website. I have an authorization code I put in and then when it starts to download it asks to insert the disk when there is not one. Below are the specs for my computer:
Windows 7, Microsoft Office 2010, PowerPoint version 14.0.7166.5000 (32-bit)
Any suggestions???
Thanks,
Chris

After downloading, please do not go inside Presenterwin32” folder or the “Presenterwin64” folder .
Use the setup.exe that is outside these folders. It will automatically detect whether your PowerPoint is 32 or 64 bit and will install the corresponding Presenter.
Hope this will resolve your issue.
Thanks
Alpi Agarwal
Adobe Presenter Engineering Team

Evaluator.java won't compile due to issues with javax.tools.*

* Evaluator.java
* Created on January 23, 2007, 4:17 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package ObjectTools;
import java.io.*;
import java.net.*;
import javax.tools.*;
import java.lang.reflect.*;
* Utilizes {@link java.lang.reflect} package
* @author ppowell-c
public abstract class Evaluator {
    public static boolean writeSource(final String sourcePath, final String sourceCode)
    throws FileNotFoundException {
        PrintWriter writer = new PrintWriter(sourcePath);
        writer.println(sourceCode);
        writer.close();
        return true;
    public static boolean compile(final String sourcePath) throws IOException {
        final JavaCompilerTool compiler = ToolProvider.defaultJavaCompiler();
        final JavaFileManager manager = compiler.getStandardFileManager();
        final JavaFileObject source =
                manager.getFileForInput(sourcePath); /* java.io.IOException */
        final JavaCompilerTool.CompilationTask task = compiler.run(null, source);
        return task.getResult();
    public static final java.lang.Class loadExpression(final String path, final String className)
    throws MalformedURLException,
            ClassNotFoundException { /* java.net.MalformedURLException */
        final URLClassLoader myLoader = new URLClassLoader(new java.net.URL[] {
            new File(path).toURI().toURL()
        /* java.lang.ClassNotFoundException */
        return Class.forName(className, true, myLoader);
    public static java.lang.Object evalExpression(final Class test)
    throws NoSuchMethodException, IllegalAccessException, InvocationTargetException {
        final Class[] parameterType = null;
        /* java.lang.NoSuchMethodException */
        final Method method = test.getMethod("expression", parameterType);
        final Object[] argument = null;
        Object instance = null;
        /* java.lang.IllegalAccessException, java.lang.reflect.InvocationTargetException */
        return method.invoke(instance, argument);
    public static Object eval(final String expression)
    throws FileNotFoundException, IOException, MalformedURLException,
            ClassNotFoundException, NoSuchMethodException, IllegalAccessException,
            InvocationTargetException {
        final Object result;
        final String path = "c:/";
        final String className = "ExpressionWrapper";
        final String sourcePath = path + className + ".java";
        writeSource(/* to */ sourcePath,
                "public class " + className + "\n" +
                "{ public static java.lang.Object expression()\n" +
                " { return " + expression + "; }}\n" );
        if(compile(sourcePath)) {
            final Class class_ =
                    loadExpression(/* from */ path, className);
            result = evalExpression(class_);
        } else {
            result = null;
        return result;
}Produces compiler errors on javax.tools.ToolProvider along with nearly everything else in javax.tools to boot.
I'm using J2SE 1.5.0 with NetBeans 5.5 so they all should be there. I'm following the example at http://userpage.fu-berlin.de/~ram/pub/pub_jf47ht9Ht/evaluating-expressions-with-java since all I want to do is come up with a Java equivalent of "eval()", which I use in PHP whenever I need it.
Help appreciated, I'm lost here.
Thanx
Phil

How do you do the Java equivalent of eval()?The language provides no support for that.
Reflection lets you call any method, where you
specify that method's name as a string and go through
a few other steps to build the proper Method object
with the proper args.
(http://java.sun.com/docs/books/tutorial/reflect/) It
won't let you just evaluate Java source code as a
script interpreter though. To do that, see
www.beanshell.org. Jython and I think Ruby on Rails
also give you scriptingin Java. Jython uses Python's
syntax, but gives you access to your Java classes. I
don't know ayhthing about RoR.I am going to look up PHP/Java myself as I know no Python right offhand (but probably could learn it in about 10,000 years). Tried to figure out reflection but couldn't figure out how to do what in PHP we do like this:
$msg = eval('JButton ' . $nameArray[$i][0] . ' = new JButton("' . $nameArray[$i][1] . '");');

Issues with BAT tool on UCM version 7.1.5.31900-3

Similar Messages

Maybe you are looking for